Bought 1 today: wasn't able to remove the tire, because I live in a 2 story apt building,(no concrete floor to mount 2, plus it's someone elses property) but was able to break the bead, in order to change a valve stem. Harbor freight has some pretty decent stuff. The balancer is pretty decent as well. I purchased 1 a couple of years ago...👍👍👍

Good video. I have one of these things, because there is an attachment for this harbor freight tire changer that is used for mounting and dismounting street motorcycle wheels/tires. So I had to buy this machine and the attachment for changing motorcycle wheels. Which isn’t that great..I just use the motorcycle wheel holding attachment and I spoon the tires on with small highly polished motorcycle tire irons.They’re cheap. But they will work if you have it mounted solid as a rock to the floor. The biggest problem I had mounting tires was mounting this harbor freight tire changer to the floor. I pulled the lead anchors out of the floor two times wrestling with a tire mount/dismount job.. I worked in gas stations in the 60s when I was in high school. And all they had were manual tire machines. And four-wheel-drive vehicles were not very common, and in Pennsylvania, everyone did seasonal tire changeover’s. From summer tires, two studded snow tires, and back again in April to summer tires. So I know how to do it.. this machine does not make it easy, and unless it is mounted to the floor as solid as a fire hydrant is to the curb, it ain’t going to work. The guy in this video minded this machine correctly, and the brackets at the base still flexed in this video Find an old timer service garage that’s been in business for decades and buy their tire mounting bar from their old manual machine from them. I bought one for $10. Those old manual tire mounting bars have a shoe on one end for mounting tires, and the opposite end of the bar is for dis mounting tires.. mounting bar you get with the unit from Harbor freight is Stone Age crude. And it scratches the hell out of the wheel all the way around where it contacts the wheel..If you can, try mounting and dismounting the tire on the backside of the wheel where the scratch damage won’t show, but that’s not always possible.. if you have expensive wheels or very nice wheels, don’t buy this tire machine for changing tires on those wheels. You will damage them. Go to a garage that has a modern machine that does not even touch the wheel at all when mounting and dismounting tires. I have an old coats manual tire changer I’ve had since the late 70s which I have changed dozens and dozens of tires back before everyone had 4 Wheel Dr. vehicles, and I had to mount and dismount snow tires to summer tires every year on everyone in my family’s cars and trucks. I don’t use it so much anymore because everyone in the family has 4x4 , vehicles in there are no Seasonal tire changeovers anymore. Keep your eye open for an old certified bubble balancer that they used before the spin balancers took over..A lot of old garages have one sitting in the back of the shop unused. I have one .. The modern spin balance they sell you, they tell you that it will balance your tire to the micron. The problem with that is, do they absolutely clean your wheel before they balance your tires to the micron? No.... do they remove the label/sticker from the new tires you are buying before they spin balance them? Usually no...Do they wash the tire to make sure that it has all of the dust and dirt removed before they mounted to the wheel if they claim they’re going to balance it to the micron. No.Those 3 things alone, there goes your balance to the micron out the window.tires have whiskers on them from the mold that the tire was made in. When you drive down the street those whiskers get shaved off by friction, there goes your micron balance job again...If you really want to balance the tires , use a bubble balancer, after the tires have been driven for about 50 miles.Bubble balancer’s are what they use to balance airplane propellers and helicopter rotors to this day... A couple other things. Be very very careful on wheels that have air pressure monitors in them. You can easily break one of those tire pressure monitors when poking the pry bar into the relief gap inside the wheel when mounting/ dismounting tires.. The wheels in this video do not have those pressure monitors..So the job done on this video was not as complicated as it can be it with a tire that has a tire pressure monitor.also, now would be a good time pop in new tire valve stem‘s while you have the tire off.. also, take the time to clean the inside of the rim where the tire contacts the rim to /remove built up residue rubber that can cause a leak. I use a very stiff plastic scraper.. It was a good thing in this video that they used actual tire mounting lube. For years and still to this day many people use dishwashing liquid as a lube to mount and dismount tires. The horrible mistake everyone makes that uses dishwashing liquid is, most dishwashing liquid‘s have LYE as an ingredient. LYE destroys aluminum wheels. Many times. When LYE is used as a lube to mount tires, that gets trapped between the tire and the wheel and does not wash off. That corrodes the wheel at the seal, and causes slow leaks because the wheel is corroding. You can use dishwashing liquid in an emergency if you use Dawn dishwashing liquid. That does not have LYE in it. LYE is the ingredient that makes dishwashing liquid feel slimy While you are at Harbor freight buying this tire mounting stand. Pick yourself up one of their 24 inch tire mounting spoons/bar. Sometimes the mounting bar that comes with this stand new just won’t get that tire on that rim Right when you almost have the tire on the rim. One of those tire mounting bars that you pry the tire up over the lip of the rim with will come in handy.. Also, don’t waste your money buying nitrogen to put in your tires, it’s a scam, always always always put the valve cap on the valve stem especially if the valve stem points straight towards the axle as on a motorcycle wheel.. because, centrical force multiplied by impacts with potholes can actually let air out of the tire when that valve stem is in the right position during an impact. And finally, when you put your wheels back on your car/truck. Use a torque wrench/not your air impact gun at full power, over tightening wheels is one of the causes of warped rotors Depending on the style of rotor/wheel stud design.

I used to to this work when I was a younger man. 1. Put soap on the tire when you are breaking the bead. The soap then has a chance to run down onto the tire bead. 2. When dismounting the tire press down on the tire and put soap on the inside (bottom) of the tire bead. The dismounting tool will not scrape rubber off the tires this way. 3. When mounting the tire; plenty of soap is applied on the inside of the tire bead and on the outside of the tire bead. At this time look at the rim and scrape off anything that would prevent the bead from sealing on the rim, use a wire brush. When installing the second bead, push the tire down onto the depression of the rim so the tire bead isn't broken. 4. Push the tire down to seal the bead before airing it up. Loosen the metal nut that holds the rim a little to allow for tire expansion before airing the tire up. Then pull up on the tire to seal the top bead. Line up the tire with the valve and wheel weight marks that you marked before you took the tire off. Air up the tire.

I wanted to change my tires on my quad I was told it would be $30 For each tire ..120 $ ..The store told me if I bought the tires there it would be free ... 🤔. I went to Harbor freight and bought this tire changer for around 40 $. bucks ... and changed all four tires in about 20 minutes 👏🏻👏🏻👏🏻 So I change the tires on my wife’s quad also. 😃

手で入れるとは素晴らしい！ また、固定方法もしっかりしていて素晴らしい！

NO STOP WAIT... What U doing Dad..? That flat end of the bar is ONLY for tightening (at 2:05 ), and later for loosening - the screw-down center piece. It is NOT for dismounting the bead at 2:10. THE OTHER END is for that job .. Note that the other end of the bar is NOT a handle - look at it's twisted shape - as that's deliberately designed that way, for holding the bead whilst you remove it (and for later use - re-beading the tire).

I use soapy water (dish liquid) as a tire lubricant for removing and installing the tire... Cheap and works great!

Good demo, Been looking at these on eBay and the pictures dont show how its used, Couldnt work out what did what or how, But seeing you remove & refit is really good, Thanks for posting.

Some tires like passenger truck tires and suv tires can be pushed on like that, but if the sidewall is pretty stiff it is easier to just use the bar to mount the tires.

very useful & good job by your buddy! he's a fast bugger. good review on this product.

awesome demo -- they should have a check ready for you-- many thanks

It is an economical tire remover. and can be produced for use by yourself.

Ok muchas gracias es muy bueni lo hacen ver facil felicitaciones

Just bought one and mounted it with flush anchors so i can put away when not in use and tried it for first time tonight took 5 mins to do one set of 4 here in canada would cost 80 bucks i payed 50 for the tire changer already saved 30 hope it will do atv tires as well

so weird the timing of someone replying to this comment on this video. i got my tire changer a long while back, along with the motorcycle attachment and the balancer but i have only used it for bike wheels and a wheel barrel , but just yesterday I busted off some change to get me some new tires for the Yukon and i am waiting on the arrival now. This one set i will make all my dough back for everything i have purchased. LOL I used a promo code for Cooper Discovery AT's 265/70r17's made in the USA with the same specs as the cooper Discovery AT3 - I have a gift card and the promo, by installing them myself I am getting a killer deal. 302.00 LOl for a set of white letter outlined made in the USA 65000 mile made in December of 2020 bad boys. I just have to do the work is all. CA CHING! Oh yeah I got all that stuff from harbor freight with a coupon from hell. LOL I have a 71 vw to change out as well and mazda b3000 4x4 and trailer tires , so this is really saving now. I will be up many $$ in the long run.

Thank u for the video buying one for sure!!!!

I bought this at Harbor Freight it works excellent mine was $35 with the 25% off coupon I only paid $25

Need to use the lube on the tire during dismount and mount. You can see him ripping the rubber from the bead when he removed the tire. If they were going to trash the tire it wouldn't matter but since he is reusing these tires, that bead is now weaker. Just an FYI for the future. The lube on the tire would have prevented that.

I have an identical unbranded one here in the UK, which I got used but in very good condition for £30...They are £48 new on ebay. They are all cheaply made in China and their quality control standards seem to be almost non existent...I am mainly referring to the bead breaker, which on mine was not suitable for purpose. The first mod I did was to get a file out and file off any burrs on the edges of the blade, as I feared it would easily damage the sidewall of a tyre. The second mod I did was to the blade itself...I noticed that on videos like this one, it shows the blade of the bead breaker to have an almost 40-45 degree bend in it about half way down...But my blade only had a 10-15 degree bend in it, so it wouldn't slide under the rim and kept suddenly slipping off the bead onto the vulnerable to damage sidewall while I had downward pressure on it! So I knew I would have to increase the bend in the blade, which I did with a club hammer, a big bench vice and a 3 foot length of 60mm x 40mm x 3mm steel box section tube. A used the club hammer to sandwich between the centre of the front of the blade and one jaw of the vice, with the centre of the back of the blade against the other jaw...This was to make sure the angles on each side of the blade, which approximate a curve, were not disturbed. Then I slipped the tube over the two vertical bars and bent it forwards, using the tube as a lever...I probably only doubled the amount of bend in the blade but that made all the difference and now it doesn't slip off the bead anymore. Another mod that is really worth doing if you want to stop nice alloy wheels being scratched is covering the round metal plate you drop the wheel onto with a round disc of rubber. I cut one out of an old rubber car mat. I cut a hole in the centre of the disc so it would slide down over the central shaft. I also made a smaller rubber disc, again with a hole cut in the middle, to slide over the shaft and sit over the central studs, so the steel cross piece that holds the wheel down cant scratch the centre of alloys. I also cut some more rubber mat and made a cover for the steel channel under the bead breaker, so I can drop an alloy wheel onto it without fear of damaging it. I know you can buy special non damaging bars, with Nylon tips, for alloy wheels but they cost 3-4 times more than the whole tyre changer itself so I simply modified the stock steel bar by wrapping some duct tape over the ends...Works perfectly. :) By the way, you don't need to spend big bucks on fancy tyre lube, just use dish washing liquid and water...It costs next to nothing! As I don't have a special fast inflator to seat the beads, I spray some deodorant aerosol spray into the tyres for a few seconds and use a blowtorch to ignite the spray...It seats the beads instantly!...It is perfectly safe to this because the wheel is still clamped securely on the tyre changer. Then I use a standard tyre inflator and an old compressor to to the rest.

I plan on getting one of these and the balancer. I am going to drill and make some anchors in the concrete on my garage floor so I can remove it when not in use. Remove all my wheels, remove / replace tires and balance myself. I am also going to make repairs if I need too with patches and plugs. Tired of paying tire shops $80-$100 to replace a set of tires that already cost you $500+ a set

Cost me a lot more than 10 bucks a tire, thanks for the vid! Very good info.

If you do a few tires now and then for about $40 bucks its a good little unit.

Thank You Again for making this

Got this for $30 after $25% off coupon for July 4th. Took 4 tires off and put 2 back on so far. Saved me $20 and I didn't have to give any money to Walmart.

Simple as that! Very nice!

great and simple machine that helps to build a better budget 😁👀✔

Thanks for sharing

yeah thanks buddy ... you saved my ass at work

Well done!

you could always throw beads inside the tire to balance and skip the trip to the shop to have them balance the tire

Se ve como rompe el sello de la llanta, muy probablemente eso cause fuga, a menos que sea una llanta que se deseche, de cualquier modo si usas la misma técnica para montar una nueva la podrías dañar igualmente, recomiendo depurar tu técnica y practicar 👍

I have literally seen this same tire changer online. In seven different colors offered under different brand names. Their videos all show the same take off and installation procedures. I can't say that they aren't all remarkably similar in construction.

I use dish soap and water. Works great especially if you're not under pressure lol

How do you balance it?

I have the same design manual tire machine but mine is a larin brand, my bead breaker bent inward several dozen times and i cant really use it that much, has your bead breaker ever bend when trying to break the bead??

2:50 he just cut of rubber from the tire with the tool. 2:55 oops, he did it again! I was quite impressed watching him force the tire back on the rim, like He Man! But i doubt that he could do this with every tire. However, i believe he could force the tire back on with the tool, may be you could show this with a common street car tire. I think you have a nice vid here, like the explanation.

Quick tip , $1.50 for litre of cheap dish soap mixed 4-1 ratio and voila instant lube for doing this

He runs $5 tires from the discount rack like I used to. 20@ $5 tires are just as good as 1@ $100 tire.

I didn’t even mount mine to the floor. Worked great

Could I use this machine for replacing a motorcycle tire? I think not, because there is no hole to block the rim beside the axis. ¿right? Thank you.

Xcd225/75/R14-15เส้นละเท่าไหร่ครับ

Damn he made it look SOooooooo easy. Thanks for the video massis32210

See I bent My old Harbor Freight tire machine bead breaker. Any Tips on how to Keep from bending the bead breaker? ( Harbor Freight 69686 machine) I don't have my Mig welder anymore, to weld any type of brace to the bead breaker. I bent my Old Bead breaker, But got a 2nd Harbor Freight machine, and would like to keep from bending the "new" one. Thank You.

Muy buena gracias

I bought the balancer at Costway for 54.95 free ship/no tax. It works

good shit bro honest review

think this thing will work for ATV tires? kids racing and changing tire for different places, so this would definitely be cheaper than a shop.

Soapy water works just fine for break down and re mount way less expensive

Well Done !!!

After you put a tyre on does it need to be balanced or could you use it straight away

My guess is you take the slab where it’s bolted to. It is after all portable.

เครื่องมือถอดยางมีขายใหมครับ

Could this change a 205/70R15 tire? The tire dimensions in inches are 26.3 Diameter x 8.1 Wide

That rubber that came off the tire when dismounted is no big deal. All tires have a corner of rubber on the bead. That’s not where they seal. Unless you get carried away. Thanks guys..

Great job man, keep up the good work.

Sliced up the bead taking it off. I saw that. Lol Also good to loosen the hold-down before inflating so it's not pressured against it.

What size air compressor did you use

What happened to using a sealant during the mounting process?

Cuanto vale la maquina la mas barata en nogales sonora

Doesn't say what all sizes it changes. What's the max tire size and smallest? Custom rims?

Do you have the manual balancer as well?

Tire lubegoes on easier using squirt bottle,save on liquid

Not bad but on aluminum rims I would protectbyhe aluminum rims from the metal hold down also make or get a special removel installation bad made of hard plastic or nylon tip so u ront gouge your aluminum rims

"Don't tear up the tire" .... as he does it at 2:57 (time) on the video! opps... lol

Windex works just as well

Will it work for low profile tires?

Is macin ka ketana Rs, hii

Oi boa tarde qual que é o preço dele

Thanks

Máquina muito dez

That is only for people who live outside the city or towns..it's like the farmers only they have extra diesel tanks in bed because they live outside the city...in a city or town with a lot of commerce nobody wants that given away

Gostaria de saber como é a ponta da espátula de mete o pneus.

How much praiz

Thank you so fucking much for posting this video you’re a fucking lifesaver bro

How many inches thick of concrete and how big a pad you need to mount this thing to?

Does it work with motorcycle tires?

Where you get them mounted for 10?

Can you give the link to buy this?

Can you change a lawn mower tire on this changer?

Yes gran fader ( yo viendo esto en ingles y hablo español te entiendo perfectamente 😅😅😉)

Me gustaría. Trabaja en una de ella

Wouldn't use this on just any wheel this right here most likely with scuff n scratch wheel and doing tires myself even with machine isn't always easy especially low pros and rf ill pass on this

avant tout démontage et remontage des pneus il faut s'assurer que le lieu est approprié pour le travail que l'ont va faire .ensuite être sur de pouvoir faire le travail auquel on est confronté.

en ce moment sur amazon y a ce demonte pneu a 170 euros amzn.to/2FCaIf4 a votre avis c'est un bon demonte pneu ?

Prise ??

Is that available in Philippines?

How is this portable if you have to bolt it to the floor???

Works good

Sweet

Newer soft tires easy, older harder tire HELL.

Wow Super

THANKS YOU THIS VÍDEO WELCOME TO BOGOTÁ DC COLOMBIA 🇨🇴🇨🇭 HJ3JAY

Ya you won’t leave for under 40.00 they make you buy balance

Check because I think do you use the wrong stick side not sure

Dish soap for a dollar and dude worked harder than he had to if he'd pushed the bead below the drop center it slides right on...

Como eu faço pra comprar está feŕramenta

I want this produnct in india how could i buy it

they want damn near 25 a pop here, I can break the bead with my foot LOL. i can't get them off the rim and re install them though so still need a machine.

👍👍👍👍👍👏👏👏

How much does it cost?