Рет қаралды 9,541
This is the maiden flight of my Savage Bobber from Planeprint out of the 3D printer. It flies very well. I love this beautifull little plane. :)
Attention: Most of the time you will only see a small dot in the distance. xD
www.planeprint.com/savage-bobber
Motor: 2303 1800kv
Prop: GWS 7060
ESC 20A
Servos: Micro 4.3g digital
Battery: LiPo 2S 850mAh
TOW: 514grams
Flight time: cruise ~4:30min
3D Filament:
Material4Print PLA RAL 9003 Signalweiß
www.material4print.de/de/prod...