The mic may be crap, agreed but the whole effect of being in the cockpit, is spot on mate! Super cool!
@gernotrieger2338Ай бұрын
Die neue Kamera liefert wirklich tolle Bilder!
@SuperJayJoeАй бұрын
Naja, bin nicht so begeistert. 😅 Die vorherige Runcam 2 4K war besser. Dieses Video hier musste nachbearbeitet werden, das Rohmaterial hat unschöne Farben und ist viel zu dunkel. Und die Tonqualität ist echt miserabel. Hab jetzt ein Stück Schaumstoff aufs Mikro gemacht - schade, dass ich die Cam dafür schon aufschrauben musste. Aber immerhin stoppen die Aufnahmen mit der Runcam 6 nicht mehr😂. Die schreibt zu jedem Video auch noch Gyrodaten in einer Datei mit. Damit kann man am PC diese dynamischen Kamerabewegungen mit der Software "Gyroflow" machen - sieht ziemlich cool aus.
@charleseast3439Ай бұрын
I’m printing this now. Where did you get the seat?
@SuperJayJoeАй бұрын
You can find the seats and other stuff I made for the Big Bobber on Thingiverse. Just search for Planeprint Big Bobber.
@beachtrash1852Ай бұрын
I don't think nd will do anything for jello.
@SuperJayJoeАй бұрын
Didn't test it yet myself. I saw in a video that this could help, together with the shutter set to 1/120 for 60fps.
@vpsrj2 ай бұрын
Very nice job, congrats! And what do you think about use LW-PLA at wings and front fuse to reduce weight?
@SuperJayJoe2 ай бұрын
There is no need to print parts with LW-PLA. My 125% XL Bobber is with 3kg on the heavy side but it flies very good and can also be flown pretty slow. If you want to print it with 125% size, you need more weight in the nose anyway for the correct CG. I had to glue the tray for the lipo packs directly behind the motor and it aditional needed some lead in the nose.
@Jockadopolus2 ай бұрын
Well done, and easy to repair if needed. 👍👍 Joe
@SuperJayJoe2 ай бұрын
Thanks! 😃 And many thanks for the STLs you provided!
@onedisser2 ай бұрын
Hi, ein Freund von mir möchte gerne mit dir Kontakt aufnehmen (3D-Druck Rotorblätter). Er ist aber nicht gerade Internet-affin und möchte es über e-mail machen. Kann ich deine mailadresse für ihn bekommen?
@SuperJayJoe2 ай бұрын
Superwitzig wie KZfaqs Algorithmus und AI Bots manchmal arbeiten xD. Bin gerade just in diesem Moment dabei ein Video hochzuladen und den Text zu editieren zum Erstflug meines Gyrokopters mit '3D gedruckten Rotorblättern' und dann kommst du jetzt daher um meine Email Adresse zu fischen? Jedenfalls findest du später nach Veröffentlichung darin ein Link zu RC-Groups wie man 3D gedruckte Rotorblätter druckt. Aber die sind nix für die Graupner Extra 300S. xD
@douglawton81864 ай бұрын
Beautiful plane!!! I downloaded your seats and instrument panel from Thingiverse. What is the off-white PLA color/brand? Also, what size build plate is needed for the 125% version you printed?
@1balloon14 ай бұрын
Thanks for making vids on this plane there’s not many I’m pretty sure I’m going to make this one
@user-ck2hw1gk2h6 ай бұрын
NICE
@BirdieRC8 ай бұрын
In the past, Multiplex and other major brands, offered good quality planes that could last for decades. Now, you can only get planes made from packaging material and low quality. Even normal use will wear out this junk. Also life cycle of these is short and after some years you cannot obtain spare parts. I rather build from plans now, but most of us do not have the patience for this.
@lulufpv8 ай бұрын
Vers Nice plane i’m looking forward to build one, And this seize looks pretty good to make a scale model but does it realy fly on 3s ?
@SuperJayJoe8 ай бұрын
Of course! This motor delivers 1000 watts on 3S and is more than enough for this heavy 125% upscaled 3d printed Big Bobber from Planeprint. I'am flying with 1/3 throttle all the time.😉 But 13x6 prop nowadays. That's more efficient.
@lulufpv8 ай бұрын
@@SuperJayJoe very nice ! I don’t think I have such a big motor but with a 3548 1000kv on 4s with a 12inch prop I think the result will be similar. Thanks
@marcozuccati8 ай бұрын
arghh..very strange thing...have you sended this video to multiplex? I am very sorry that this happened to you
@Mark-wx1ho10 ай бұрын
Where is this field? It's nice.
@MrDwnhlbikr10 ай бұрын
What motor did you use?
@bobbycvi10 ай бұрын
nice
@tvideo1189 Жыл бұрын
Really nice. What PLA did you use, LW PLW?
@SuperJayJoe Жыл бұрын
Thanks. It's normal PLA.
@martinschmidt5541 Жыл бұрын
Sehr schön gebaut und super vorgeflogen - Danke...
@vinylbbq519 Жыл бұрын
Hello ! Where I can get the files for this plane..? Thaxs a lot.!
Thank you, It felt like I was in the back seat almost real! very well done.
@keepyourairspeedup Жыл бұрын
Does your camera use built in stabilization software, or is the video stable because of plane ?
@SuperJayJoe Жыл бұрын
The video was filmed with a Runcam 2 that doesn't have a stabilizer. But the plane does have a gyro stab.
@WrightBrosRC Жыл бұрын
Nice job!
@larryblanks6765 Жыл бұрын
Hardly saw the plane at all!
@danahager5782 Жыл бұрын
Congratulations on a successful maiden flight. Thanks for sharing.
@ripmax333 Жыл бұрын
Did you sand the entire plane before painting?
@SuperJayJoe Жыл бұрын
No, I don't sand planes printed with PLA. That would ruin the nice and shiny look of the PLA. I use acrylic paint that bonds perfect to PLA surfaces. The only material I grind is LW-PLA, just to get a nicer surface.
@Boflieger Жыл бұрын
Ist bei meinem auch passiert. Wurde 1:1 getauscht. Bekannter Produktionsfehler bei MPX
@pietrinico Жыл бұрын
Hello colleagues from Madrid, it is super strange this multiplex quality drop. I was thinking of a not very expensive model that was not made of carbon fiber and without much construction work, But now you have made me think twice...
@packer34 Жыл бұрын
What did you use for the pins in your wing supports. paperclips?
@SuperJayJoe Жыл бұрын
These are M2 screws. Didnt like the idea of using whiggly clips.
@danclara1 Жыл бұрын
so what does yours weigh. the stock size is around 1400. im trying out printing the tail in lw pla and i saved 31 grams just on the tail
@SuperJayJoe Жыл бұрын
It's the 125% upscaled Big Bobber. Weighs about 3000g. 😉
@SuperJayJoe Жыл бұрын
My normal sized BB weighs about 1600g and flies great with it.
@raymunro98942 жыл бұрын
THE FIRST THING TO DO.... unplug the batteries. Geeze.. no common sense,??
@SuperJayJoe2 жыл бұрын
The ever thing to do. Never, ever buy the RR Lentus!! This thing is shit.....Spits out the whole engine bulkhead when you give a little throttle.
@lesquale1282 жыл бұрын
The motor was destroy after the crash and if that happened during the flight, was it not possible to glide until landing? I don't get it...
@monami52012 жыл бұрын
It's like watching a tiny spec in the sky.
@Paramanch362 жыл бұрын
Which motor did you fit please
@rcjangoo2 жыл бұрын
was ist passiert? 😱 ist der spinner abgegangen oder der ganze motor?
@SuperJayJoe2 жыл бұрын
Der ganze Motor ist rausgerissen. Zum Glück haben sich dabei die drei Kabel irgendwo im Elapor verfangen und der hing noch dran. Da war echt kaum Klebstoff um den Motorspant. An der wichtigen, kraftschlüssigen Verbindung von Spant zum Vierkantrohr war garkein Kleber drin!! Irreparabler Schaden an der Rumpfnase. 600€ für die Tonne wegen sowas? Echt lächerlich von Multiplex...
@rcjangoo2 жыл бұрын
@@SuperJayJoe ja! ich bin mit meinem auch nicht richtig zufrieden… meiner fliegt nicht schön! er war zuerst viel zu hecklastig (genau an die anleitung gehalten)! ich habe mich dann mit dem schwerpunkt etwas gespielt (mehr nasenlastig)! jetzt reagiert er zwar schön scharf auf die steuerbefehle… jedoch bei vollgas zieht es das ding extrem nach unten🙈! p.s.: ein kollege vom modellflugverein hat seinen auch wieder verkauft… er war auch nicht zufrieden…☝️
@SuperJayJoe2 жыл бұрын
@@rcjangoo Also was ich nach den paar Flügen sagen kann, der Lentus fliegt einfach fantastisch wenn er und der Sender richtig eingestellt sind. Da gabs bei mir absolut nix zu meckern, hat echt Spaß gemacht. Aber das schon nach ein paar Starts einfach der Motor aus der Nase reißt hätt ich bei einem 600€ teuren Modell nun echt nicht erwartet. Zwei Vereinskollegen hätten ihn sich auch gekauft aber mit dieser fehlerhaften Werksmontage durch schlechte Verklebungen sehen sie davon ab. Die schlechte Montagequalität ist übrigens im über 150 Seiten langen RC Network Forum über den Lentus nachzulesen. Hab den Kit-Bausatz nicht gekauft weils da ziemlich schwierig ist den Rumpf verzugsfrei zusammenzukleben ohne dass das Seitenleitwerk nachher schief steht. Und mit der nachgereichten Multiplex Anleitung zum Zusammenkleben verzieht es sich trotzdem und steht schief. Und die typische Kulanz von Multiplex, bei Herstellungsfehlern dem Kunden einfach zwei neue Rumpfhälften anzudrehen, weil der Kunde Unwucht im Propeller hatte, ist einfach nur lächerlich!
@rcjangoo2 жыл бұрын
@@SuperJayJoe ich gebe noch nicht auf! ich werde die idealen einstellungen noch finden🧐 und wenn ich ein paar ,,mischer“ dazuprogrammieren muß🙈
@BussiOlli2 жыл бұрын
Unglaublich, wie schlecht Multiplex geworden ist. Normalerweise mit diesem Video, hätten sie ihnen den Flieger komplett ersetzen müssen. Nie wieder Multiplex. Ich bin fortgeschrittener Anfänger. Bin begeistert vom Consendo Evolution von Horizon hobby. Der fliegt wie auf Schienen, auch ohne save Funktion. Egal ob in der Thermik mit 3S oder Kunstflug, das Teil ist genial. Auch die Verarbeitung ist Super. Multiplex ist auch viel zu teuer, für Elapor. Liebe Grüße ✌️
@FoxSock2 жыл бұрын
that sounds glorious
@t.m.42542 жыл бұрын
When you design a sooty albatross version you just let us know.....the eagle is an amazing design
@jeffhardman22292 жыл бұрын
Where did you get the scale gauge panel?
@SuperJayJoe2 жыл бұрын
It' s a remake of a Planeprint Big Bobber cockipt found on Thingiverse. I added some more details like sun visors above the gauges and a choke lever. I should upload my version on Thingiverse too.
@jeffhardman22292 жыл бұрын
@@SuperJayJoe yes please. Upload that if you have time
@SuperJayJoe2 жыл бұрын
@@jeffhardman2229 You can now download the cockpit on Thingiverse. Search for "Planeprint Big Bobber - Scale 3D Cockpit" 🙂
@marcoaurelioxaviermoreira46312 жыл бұрын
It seems airworthiness!
@marcoaurelioxaviermoreira46312 жыл бұрын
Great Buddy!
@buffalotv75482 жыл бұрын
Hi! Can You share the motor mount and servo trays in the upscale versión? Please?
@flippincrazycars2 жыл бұрын
That looks great in the green and white colours. Nice build 👌🏻
@flippincrazycars2 жыл бұрын
What a great flyer! I’m going to print this out for the summer cannot wait!
@ripmax3332 жыл бұрын
What PLA Brand did you use? I like the color scheme although it would make me nervous in terms of visibility.
@SuperJayJoe2 жыл бұрын
The PLA is from material4print (Germany). I had no problems with the visibility. The attitude is always clearly visible, even a little further away.
@guytrimble81712 жыл бұрын
Stunning airplane. I am putting this in my need to do list.
@t3hav8r2 жыл бұрын
That wind generator makes me nervous...
@SuperJayJoe2 жыл бұрын
Yes it looks strange but it's pretty far away. What makes me more nervous is that💩cornfield. The next few days it will be finally harvested.
@t3hav8r2 жыл бұрын
@@SuperJayJoe Once it took five of us whole afternoon to find a gasser that fell in tall grass. I feel you.
@CAMgeek2 жыл бұрын
@@t3hav8r We lost a plane once in the corn that we never did find. The farmer found it at harvest and brought it back to us. It was mostly ruined by then but neat to get it back.