Planetary Freecoaster Review: The Future of BMX?

Рет қаралды 21,827

2 жыл бұрын

Planetary freecoaster wheels like the BSD Revolution, Colony Swarm and Alienation Venus have become increasingly popular as of late. But will this all-new design take over the freecoaster market? We'll let you be the judge as we review the pros and cons of the planetary freecoaster system. These hubs could likely be the future of BMX freecoasters.
Colony Swarm - www.danscomp.com/search?s=col...
BSD Revolution - www.danscomp.com/search?s=bsd... Alienation Venus - www.danscomp.com/search?s=ali... See our full line of freecoaster hubs here -
www.danscomp.com/hubs-accesso...
To disassemble your Colony Swarm or other planetary freecoaster - • Colony Swarm Freecoast...
Get all the best BMX bikes, parts and accessories at www.danscomp.com/
Follow Dan's Comp on Instagram - @Danscompinstagram
Follow Mike on Instagram - @mikey_likes_bikes

Пікірлер: 66

@matthewdickerman3142 2 жыл бұрын

With this coaster I can crankflip with no issues, I don't run my bottom bracket super duper tight just enough to where my crank arms have no wobble plus 1/4 turn. I've only had to do maintenance after a few months of riding once and that was just tightening up the outer cones. Some of my friends have been experimenting with under and over greasing these hubs to see the different results and they all like them.

@danscompvideos 2 жыл бұрын

Great to know! I was able to kick one around but I also kind of suck at that trick, lol. That's when we loosened the chain a bit more and spun them by hand (as seen in the video) to get a better idea. Different setups will vary for sure. Thanks for the info.

@BiffcheeseSpinoccoli 2 жыл бұрын

Bonus points for the RAD shoes!

@swfbmx 2 жыл бұрын

Would be great to see a breakdown and comparison with all the planetary hubs. There are a lot of dos and don’t that people still are unsure about them. I’m currently riding the bsd revolution, haven’t had a single problem with the hub. Been riding heavy on it for a good 3 months and so far so good

@danscompvideos 2 жыл бұрын

The BSD, Colony and Alienation are all nearly identical internally. Check out Colony’s disassembly video in the description. I believe the Colony does have an extra o-ring on the axle, however.

@merrickloveland4076 6 ай бұрын

@@danscompvideos I know this is a year old comment, but what happens with the revolution when your feet are not on the pedals and you're rolling forward (or backward), do the pedals stay where you set them?

@thefrugivoreanimal 5 ай бұрын

@@merrickloveland4076they don't stay in the same place

@bunkbmx2059 2 жыл бұрын

My BSD is goods so far 🤘🏼

@chuckt8557 2 жыл бұрын

Hey Dans comp what’s your take on the cult astronomical wheel ? Lmk would love to invest in one 🔥🔥🔥🔥

@Itskylewalker 2 жыл бұрын

Awesome review I want one super bad.

@danscompvideos 2 жыл бұрын

Thanks Kyle. So far so good. Hopefully more people jump on these and see the potential benefits. So far so good in our testing, minus that slightly annoying squeak but it was an easy fix.

@Tj._bmx Жыл бұрын

i was able to do tire taps with pedal pressure on the bsd revalution hub

@haromirra21 2 жыл бұрын

I love my bsd and breaks are a great safety net for those who choose to use them though my bsd did get quieter after about a month it still works great though

@nightriderbmxshop6768 2 жыл бұрын

Might need cleaning or it's time to change the O-ring, it will work even better!

@paulridesbmx 2 жыл бұрын

@@nightriderbmxshop6768 where can I buy new O-rings?

@KyleNorthmoreBMX Жыл бұрын

You should do a video on the new hybrid FC hubs from Eclat and WTP

@roonald 2 жыл бұрын

nice video! more informative videos please!

@hugocunha7542 2 жыл бұрын

Probably a stupid question but, what is the difference between buying the BS revolution hub and buying the actual BSD revolution wheel? (A part from the fact that if you just buy the hub you can add it to any wheel). What I’m trying to understand is, is the wheel that comes with it (orange and black option) specially made to go with the hub?

@danscompvideos 2 жыл бұрын

No you can add the Revolution hub to any rim and it's the same hub. Going with the complete wheel option just makes it easier if you want something that's ready to go out of the box, as opposed to building your own wheel. It's not specifically design for any particular rim.

@hugocunha7542 2 жыл бұрын

@@danscompvideos oh ok! Awesome! Glad you got my question because I wasn’t sure I wasn’t explaining myself right. 🙏🏼🙏🏼🙏🏼

@paulridesbmx 2 жыл бұрын

A few months ago I bought the Bsd Revolution hub and now I sometimes have the problem that the pawls don't engage when I pedal forward. The clicking of the hub is also no longer there all the time. Unfortunately, tightening the cone nuts didn't fix the problem and I don't run my chain too tight either. I actually love the hub, but if the pawls don't engage reliably, the hub is useless Do you have any ideas what I could do to solve the problem?

@danscompvideos Жыл бұрын

Try cleaning the hub out and adding a drop of dry lube to the o-ring as mentioned in the video. There seems to be a fine line of too much and too little grease in the hub. Coworker had a similar issue and this fixed his. If all else fails contact BSD or the shop you purchased it from. If you purchased from us we can look up your order and possibly send you new internals if needed.

@nightriderbmxshop6768 Жыл бұрын

Sounds like the O-rings is worn out and needs replacement. If cleaning the clutch won't help, a new O-ring will fix the problem, it's rasy.

@DouglasThompson Жыл бұрын

@@nightriderbmxshop6768 hey! I was just about to write this. How are you all?

@DouglasThompson Жыл бұрын

Clean it out to where it's bone dry and replace the oring if you still have issues.

@nightriderbmxshop6768 Жыл бұрын

@@DouglasThompson yoyoyo! So msny amazing things going on its like a condensed BMX multiverse

@andrew1233 Жыл бұрын

Tread locker only missing and this done like a art

@cjvx7208 Жыл бұрын

Could I put a drop of try flow to eliminate squeak?

@nightriderbmxshop6768 Жыл бұрын

Yes, you can remove just the driver and spray a bit of chain lube on top of the clutch. No need to remove the clutch from the hub, just spray on it.

@danmcdonald726 Жыл бұрын

So add a rear brake?

@aaronrominske7870 2 жыл бұрын

For the braked riders like me the negative of going to fast backward is a non-issue

@danscompvideos 2 жыл бұрын

True. I should have specified brakeless. - Mike

@TheArchighves Жыл бұрын

You brake too hard and just go over the back wheel lmao, I ride brakeless so I think I could just stick my foot in the front wheel while going backwards to slow myself doen

@otavioraupp 9 ай бұрын

I don't do crankflips, never cared for them, so 1st issue... not an issue. And I ride brakes, so tiretaps and going too fast backwards, also not an issue. Yeah, I'd like to try them, even though I'm an old school rider who has ridden freewheels and cassettes for 90% of the time (I've tried clutch based freecoasters. Kinda cool but not for me.)

@413fps Жыл бұрын

why planetary hubs don't use multi point engagement pawls like more modern cassettes?

@10isawsome Жыл бұрын

My hub doesnt freecoast on fakie, its like completely random whether or not it will coast or engage in faiie for me. Any tips/fixes???

@mihalespinglae642 2 күн бұрын

Same….

@10isawsome 2 күн бұрын

@mihalespinglae642 you gotta make sure you are not putting too much pressure on your front foot when you start the fakie. Because if you start to pedal forward when you start to fakie, the hub will engage and not coast. I think this was my problem and it seems to be doing better now. Lmk if you have more questions!

@pado8196 2 жыл бұрын

I have un sealed wheels and they are both bent af😅😂I would love the theory set🙏

@TheVTRainMan Жыл бұрын

You could solve the out of control fakey by simply having a light touch on a brake lever. I've never been a brakelsss rider anyways... too many sketchy hills and dirt riding where I live. Or that is what I like to tell myself because going brakeless scares the !@#$ out of me. :P

@DouglasThompson Жыл бұрын

Lol...you act like brakes don't exist. Anyway, I had the very first planetary coaster in the United States from freenight and mine is still running great. Years later all I had to do maintenance wise was change the oring. Also that last fakie x-up down that dock was a banger!

@danscompvideos Жыл бұрын

Hey, I love brake tricks! Lol. The vast majority of FC riders are brakeless, but yes I did fail to mention that. Especially for anyone new to FCs having a brake would help a ton at first. Awesome to hear. So far we are still loving the planetary style. After the initial squeak fix mine has been rolling smooth. And thanks! - Mike

@DouglasThompson Жыл бұрын

@@danscompvideos Ya keep killing and thank you for mentioning Freenight as the origins since many people assume bsd made it.

@nightriderbmxshop6768 Жыл бұрын

@@DouglasThompson 🙌🏼

@odysseybmxboy 2 жыл бұрын

Where that manual pad at lol?

@danscompvideos 2 жыл бұрын

Come to Indiana lol

@zosterinski 2 жыл бұрын

The o-ring in my bsd revilution broke when i tried to pull it out like that, so be careful..

@nightriderbmxshop6768 2 жыл бұрын

Do you have a spare one? Please contact us or BSD to get the V2 O-ring.

@Ful-OGold 10 ай бұрын

I don’t like the idea of hardened steel on hardened steel meshing at high speed with such a small contact point

@benjaminbassett7757 Жыл бұрын

Crankflips no problem, little bit of a loose chain, and I mean little, and they flip, two if that’s u

@danscompvideos Жыл бұрын

You're right. After getting a new chain they come around a lot easier now. Crazy to think how much that old chain dragged down my drivetrain so it kind of depends on your setup. Much easier than some of the older designs that's for sure.

@just10420 2 жыл бұрын

Does it make clicky sounds like a cassette? Lol

@danscompvideos 2 жыл бұрын

Yes but it's very, very quiet sounding.

@knightwatchgames Жыл бұрын

Brakes solve a lot of those problems. Just sayin'.

@danscompvideos Жыл бұрын

True, but the vast majority or freecoaster and street riders don't use brakes. You are correct though.

@AmazingChinaToday 2 жыл бұрын

We need a 16 tooth cog ⚙️. Now 5 of these hubs are on the market, but none support two decades of BMX bikes that use 44/16 gearing.

@colingellner9939 2 жыл бұрын

Why would you ride 44-16 dude? People have been riding 25-9 and 28-10 for like over fifteen years bro 😂

@AmazingChinaToday 2 жыл бұрын

@@colingellner9939 Because my bike is a $5,000 Redline and I'm using a $15 coaster brake made for a $100 bike. I can't use a 9 tooth rear cog.

@kentakeura1617 Жыл бұрын

@@AmazingChinaToday Agree - thats why i hope a female axel bolt will come, so i can use it on my old 86 Haro Master 3/8 rear dropout :)

@AmazingChinaToday Жыл бұрын

@@kentakeura1617 There are hubs with female axle bolts, but all are using a 9 tooth cog. ⚙️ 😭

@traxxasrc10 Жыл бұрын

No company will make a 16t driver. Especially on a free coaster. Only profile has those.

@booitsnick Жыл бұрын

This guy rides a freecoaster right… reminds me of ol Ian Schwartz

@danscompvideos Жыл бұрын

Thanks! That's a huge compliment. I grew up watchin Ian ride. - Mike