Playing With Boats Proboat Recoil 2 18" & V2 Blackjack 24"

Рет қаралды 1,856

Ай бұрын

V2 BLACKJACK 24 RTR
www.avantlink.com/click.php?t...
18" Proboat Recoil2 RTR
www.avantlink.com/click.php?t...
Recommend lipo BJ24
5000mah 2s 100c
www.avantlink.com/click.php?t... 256520-69d3-496b-a06d-cfbf9af7a81d&url=https%3A%2F%2Fwww.horizonhobby.com%2Fhttps%3A%2F%2Fwww.horizonhobby.com%2Fproduct%2F7.4v-5000mah-2s-100c-smart-g2-hardcase-lipo-battery-ic3%2FSPMX52S100H3.html
Dynimite Grease Gun
www.avantlink.com/click.php?t...
Dynimite start up tool set
www.avantlink.com/click.php?t...
Thanks for Watching ironclad rc tinker test and tune everything
Personal contact information
Email
ironcladedout@gmail.com
Facebook
share/eknUp8...
TikTok
www.tiktok.com/@ironcladrc?_t...
Instagram
ironcladedo...

Пікірлер: 39

@Tyrant482 29 күн бұрын

Congratulations B, Great. I like to have a prop like this 😊 I think the hatch needs mabe in the front longer pins. Often the mono hatches have to much flexibility in the front at the round spot. So they come out in the front by closed locking in the back. And the front gets more force from the water by an impact on it or by diving. Taping the front is most times more helpful than the back. That’s my experience. 👋🏻😊

@600bubba Ай бұрын

Yeah buddy stoked my hobby shop got both my freaking blackjacks in going to go down pick them this morning

@Wanted1069 Ай бұрын

I think Proboat should switch over to rubber canopy seals. Cause the foam seals don't cut it. I have the same issue with the Zelos 36. And it kinda suprised me you got 60 out of that Das boata prop, and nothing else seems to come close!

@FEboats Ай бұрын

Stick the 120 and prop from your 81mph Veles run in it.

@user-kc2kn7re7m Ай бұрын

I like the prop testing

@FEboats Ай бұрын

I ended up removing the antenna and the rear mounted water outlets so I can tape it since I run in saltwater. No more water in the boat. Thought it was coming from the stuffing tube.

@jimstone5339 Ай бұрын

I just ran my bj24 v2 for the first time today. I really like it. I have twp 2s 5200 120c packs and got 40mph out of the box. It seems to be snappy on right turns , it will spin out. Did you have that. It also seems a little more side to side wobbly than the og bj24. But i absolutely love it.

@IRONCLADRC Ай бұрын

Yeah, I turned the dual rate back considerably, also learned it turns better on plane

@minochercowasjee Ай бұрын

You were teasing us with this one , Big B !! What is that super duper 3rd black boat ? It looks like a power house . Will you be putting her in the water soon ? Enjoyed this video. Thank you

@IRONCLADRC Ай бұрын

It's the carbon fiber oxidean dominator

@Wanted1069 Ай бұрын

Side note.... I wonder if we could get away with adding a thin bead of clear silicone sealant to the foam gasket to prevent leakage? Just a thought.

@IRONCLADRC Ай бұрын

I have some saddle tape coming for the hatch seal

@nevaseez 24 күн бұрын

Hello, I just got the recoil 2, 18" and took it out for it's maiden voyage, well after about 30 seconds it wouldn't steer left... somehow the servo became un-glued (crappy factory job??) just wondering what product you would recommend to re-stick the servo/plastic mounting bracket!

@IRONCLADRC 24 күн бұрын

CA, jb plastic weld, quality epoxy. Should do the trick

@tylerstewart7284 Ай бұрын

What prop are you running on the recoil v2 18"? And I haven't been able to find the flex shaft size is it the 1/8 or smaller ?

@IRONCLADRC Ай бұрын

It's a custom modified 3216 proboat prop (Discontinued miss geico 24 prop)

@frostgaming4410 Ай бұрын

I have a oxidine marine 36mm 1.6 pitch 3/16" bore 3616 CNC laying around and i was wondering if you though that could work well with the recoil 2 18

@IRONCLADRC Ай бұрын

I actually tested that prop on the R18 it handled it pretty good 👍

@frostgaming4410 Ай бұрын

@@IRONCLADRC So if I run this larger prop and 3s 80C you don’t think that would be too much stress on the stock components?

@dogdronesearchdd3782 11 күн бұрын

Hey man , I got my blackjack 24” to 57.9 today. It did a triple backflip at 53mph the run before.🤦‍♂️. I put a 120 amp esc in so I was able to run two 3s 130c batteries. I made some adjustments to the to the propeller lowering it? I ran out of room I’m guessing I can hit 60mph ? I am using a 43mm propeller I sharpened and balanced. I would have waisted a lot of time trying to figure out how to adjust the different components. If not for your channel I would have waisted money and time so thanks for sharing your experience. The triple back flip was epic this boat can take a few oops very forgiving. I need to find a bigger pond to hit 60mph I barely fit 47.9 in .😂

@IRONCLADRC 11 күн бұрын

I just did the same to mine, put a 120 in it this evening, install upload tomorrow morning, running video the next day

@guillermonodarse8108 Ай бұрын

would the proboat recoil 2 be able to run in the beach with the salt water and all?

@IRONCLADRC Ай бұрын

Only if you check for water leaks in fresh water first, if there's a leak find it and fix it before going to salt water

@defsounds1097 24 күн бұрын

How u think the blackjack would like two 4s packs on each side for more run time

@IRONCLADRC 24 күн бұрын

Only one way to find out? Gonna make it heavy, heavy boats tend to be slow boats

@gillian9178 Ай бұрын

It sure is a pain when manufactureres place things like water outlets or antenna mounts to close to hatches re taping hatches.

@IRONCLADRC Ай бұрын

I agree, almost like they intended the hatch to actually seal without tape

@chaoticsource 24 күн бұрын

can you run the stock shreddy on 2s? I want to run it at slower speeds with like a 5000mah 2s and use the The R/C Fishing Pole with it

@IRONCLADRC 24 күн бұрын

@@chaoticsource yes

@IRONCLADRC 24 күн бұрын

@@chaoticsource yes, you'll get like 20 25mph

@stevejackson3564 Ай бұрын

Is the recoil all plastic or fiberglass.

@gillian9178 Ай бұрын

Plastic.

@IRONCLADRC Ай бұрын

Yep, it's a plastic hull

@alexlau1030 Ай бұрын

May I ask what tape is that call?

@IRONCLADRC Ай бұрын

Clear Hockey Tape - Multipurpose Tape Roll - Durable Shin Guard Pad Socks and Gear Tape - Strong adhesive Easy to Stretch & Apply - Hokey Sports Gifts, Accessories, Equipment, Gear a.co/d/0h5B7nAQ

@alexlau1030 Ай бұрын

@@IRONCLADRC Thank you very much !!!!!!