Plumbing Pipe Roof Boot Flashing Installation on a Metal Roof

  Рет қаралды 72,074

RR Buildings

RR Buildings

Жыл бұрын

Quick video showcasing how we install a plumbing pipe roof boot flashing on a ribbed metal roof. Butyl Tape is a great metal roof boot sealant and Sashco Lexel Is your belt and suspenders.
RR Building Plans
rrplans.bigcartel.com/
Roof Boot Flashing
amzn.to/45z7PCO
Want a Free Sample pack of Sashco Products?
www.sashco.com/rr-buildings/

Пікірлер: 124
@joeyjohnson9765
@joeyjohnson9765 Жыл бұрын
I’ve noticed that in just about every video you do I learn something new, even if it’s just a little useful tip
@Ty1on3twelve
@Ty1on3twelve Жыл бұрын
Great tip. I never thought about installing boot/vent flashing using the diamond installation method. It makes perfect since. Thanks for sharing.
@MrYandel85
@MrYandel85 Жыл бұрын
As a roofer, I'm glad to see another roofer doing an excellent job. lots of people out there doing crap jobs 😂
@carlcodling5953
@carlcodling5953 11 ай бұрын
Great video, so nice to watch a how to video of someone that knows what they are doing.
@ted7x
@ted7x Жыл бұрын
Fantastic video been wondering about the best way to do this for a while and now I don't need to wonder anymore thank you so much for sharing so much great info over the years, perfect workmanship and great way of explaining everything!
@dougdiplacido2406
@dougdiplacido2406 Жыл бұрын
Great lesson on the flashing. I like the idea of the boot that goes up and over the pipe. The pvc expands and contracts a lot and it would prevent the regular boot from wearing out.
@leedavis5306
@leedavis5306 Жыл бұрын
I am starting my new home. This come out at the perfect time. Thanks for the excellent content!
@garynicholls72
@garynicholls72 Жыл бұрын
Nice job very good video very interesting and informative and very well executed. My name is Gary from the UK retired plumbing and heating engineer, keep up the good work with the videos
@travisst-jacques.4838
@travisst-jacques.4838 11 ай бұрын
Thank you for showing me the diamond shape . Bin doing metal roofs for ten years never thought of it 😅 . Love your videos man.
@sp4323
@sp4323 10 ай бұрын
Thanks for making the video with details, I need to install few vents in my metal roof and this will help
@2loco
@2loco Жыл бұрын
Excellent job Kyle. I regularly vent rangehoods through the roof with 200mm wide flue. We use corrugated iron roofs here so when I do this, i get a flat sheet of iron made up and colour matched to roof. I bring the flue out through that to prevent a dam forming up behind the boot. It doesn't look very pretty as the flat sheet stands out, so I usually bring the flue out close to the Ridge to keep the flat sheet as minimal as possible. I'm no roofing expert but this works well for me.
@webshepherd1852
@webshepherd1852 4 ай бұрын
Thanks! Great information, especially installing with the diamond pattern.
@hughprivette4212
@hughprivette4212 Жыл бұрын
Very good sir! Plane and simple. Heading to the hardware store now for the roof boot…I just like saying roof boot, just learned this term today, and this definitely helps when I install my roof boot! Be careful on those roofs, installing those roof boots with your magnet roof boots! You might need to invest in some magnetic knee pads for when you install your next…. roof boot! ✌🏻
@Built2Perform
@Built2Perform 5 ай бұрын
You can vent out the sidewall and then up around the roof here in BC, Canada.
@jerrymoore-nk7tv
@jerrymoore-nk7tv Жыл бұрын
Thank you for this video because I here metal roof no good because it always leaks around penetration I trust your work so now I feel there is a correct way to do it
@greenshieldroofing8792
@greenshieldroofing8792 Жыл бұрын
I love your work ,I always install the boots on a Diamond but never thought about using the butyl tape .
@medamit
@medamit Жыл бұрын
I wouldn't use butyl tape. The so called roofer who did my roof used butyl to seal the boots and that stuff will eventually squeeze out and harden up and you will have leaks. It's also a pain to scrape off when you have to replace the boot and do it right. Damn near all the RV's used to have butyl at the seams and they all leaked after 8-10 years.
@BraxxJuventa
@BraxxJuventa Жыл бұрын
Thanks Kyle. 👍😁
@ManuelMartinez-so1dp
@ManuelMartinez-so1dp Жыл бұрын
Good stuff Kyle!!
@douglasrenkema
@douglasrenkema Жыл бұрын
Very nice 😊 excellent video
@GlenS123
@GlenS123 Жыл бұрын
I have always put on a rib, diamond pattern. Water has more space to go around, diverts it. I personally put sealant under boot and a drip ring bedded with sealant.
@steveanderson4768
@steveanderson4768 Жыл бұрын
Never thought of putting it on the rip, but it makes sense you’re giving the running water, a place to escape rather than putting its square on the roof you put it out and angle now the water sheds off and around versus damning up and a potential leak makes a lot of sense
@dzaino1986
@dzaino1986 Жыл бұрын
Another fine demonstration Kyle. Out of curiosity, have you ever thought of using Dycor self-leveling compound on boot installs like this? It's the same product that's all over your skylights and penetrations on your RV. It's a fantastic product which also bonds to most surfaces and requires zero maintenance. Anyway, keep up on the "perfect house" project. Hopefully we get a walk-through in the end.
@mikenicholson2548
@mikenicholson2548 Жыл бұрын
Kyle, we never ever put the boot on a rib. We only use round boots. They fit perfectly between the ribs. We also don't use bulent tape. We us thru the roof chalking. Have seen alot of boots leak on a rib due to expansion and contraction. Will always leak at the bottom of the rib. Also I seal around the pipe with thru the roof before I put the boot on for added protection. Just my two cents.
@Price1861
@Price1861 Жыл бұрын
I agree with the install and install them the exact same way. However, I like to put the Lexel on the pipe and push the boot onto the Lexel. This helps keep the Lexel out of UV light and is an extra insurance policy. Roofing caulking has historically had issues with UV light. Rule of thumb when roofing has always been to use calking as an insurance policy not as a primary method of water proofing. Flashing is used to water proof. Caulking is used generally used underneath flashing to help keep it water tight. With all that being said Through the roof and lexel are great products. Never had an issue with them deteriorating because of UV light. But it still is good practice to try and keep them out of UV light. Cheers.
@ALPAmultiservice
@ALPAmultiservice Жыл бұрын
Good job. If you wanted to make a further refinement and you would have the maximum certainty of avoiding infiltration, you could create a small lip in the upper arch of the hole by bending the sheet metal of the roof, taking care not to tear it. in this way, even if the external sealing were to give way for any reason and a few drops of water would enter, it would have the possibility to flow laterally to the hole and not enter the house.
@Fehrfamilyhomestead
@Fehrfamilyhomestead 6 ай бұрын
I just finished a metal roof and I used round pipe boots, that was the first time using round ones. But with the square ones I do the diamond as well.
@thim8009
@thim8009 Жыл бұрын
Thanks, I have to put a wood burning chimney pipe through my roof, I've never seen anyone turn it like a diamond like that. Makes sense.
@richardzapalajr.4412
@richardzapalajr.4412 Жыл бұрын
Thanks, was wondering how to do that. Another concern fixed. Drilling holes in a perfect roof., Had me sweating.
@jwristen24
@jwristen24 Жыл бұрын
Nice work Kyle. I always try to eliminate any penetrations on the roof if possible in the design phase.
@fredericrike5974
@fredericrike5974 Жыл бұрын
If it has any plumbing that is a non starter. Most muni codes will not let you run a plumbing vent out through a sidewall. An appliance vent can be run through an outside wall.
@CorwinBos
@CorwinBos Жыл бұрын
Lexel, best caulk ever. I wish you could get it in more colors.
@roscoesimpson2639
@roscoesimpson2639 Жыл бұрын
Great video Kyle, just wondered if you mentioned not to drill down through where two pieces of metal roofing come together? And also it would be easier to start a hole without the hole saw on there just use your quarter-inch bit and after you get a pilot hole drilled then put your hole saw on. Also if you happen to have a battery angle drill, it's a lot easier on your wrist. Thanks again
@scr1648
@scr1648 Жыл бұрын
Thank you for sealing the boot! As a roofer I constantly find boots are leaking around the pipe. I typically seal the pipe with mastic before installing the boot as the secondary protection then on top. I like you sealed the tape though. I don’t have that luxury with the products we use.
@mikekiehnau1851
@mikekiehnau1851 6 ай бұрын
I've had my boot fixed 3 times cause it leaks around the pipe and every time, it still leaks. Thankful for this video and all the good reviews.
@rickgalos5567
@rickgalos5567 Жыл бұрын
I fill the space around the vent pipe and on the high side under the boot with low-expanding urethane foam
@tigerseye73
@tigerseye73 7 ай бұрын
Placing the boot on diamond is beneficial even on a ribless shingle roof, asphalt or metal. For sure helps guide water away from the upper edge of the boot.
@justinballard7242
@justinballard7242 Жыл бұрын
I just did this Friday. I was pretty nervous about it. I don't like holes in the roof. Lexel around the flange also screwed down. I'm pretty confident in it lasting a long time. My flashing fit between the ribs just fine also.
@jwristen24
@jwristen24 Жыл бұрын
Yeah I try to eliminate any penetrations on the roof in the design phase if possible.
@fidgetteneckwedge1418
@fidgetteneckwedge1418 11 ай бұрын
I'm not sure which metal roofing you used and the base diameter of your pipe boot. In my instance, my roof penetration fell right on the edge of a lap seam. My roof penetration is on my second sheet of metal, right next to the seam edge where my 3rd sheet is laid. My pipe is just under 5" OD, and the pipe boots available all have bases of 8"x8". My metal has ribs every 9 inches (Pro Rib from Menards). So not only does my boot not fit in a plane without creating a dam, circle or square...Lay out put the boot on a lap seam. My idea is to start the 1st piece of metal as a half sheet. This puts my pipe penetration in the middle of my second sheet and not on a lap seam. Diamonding a square 8'x8" boot should divert water away like is shown in this video.
@Foche_T._Schitt
@Foche_T._Schitt Жыл бұрын
Put on a second boot without the flange over the first to protect it from UV light.
@Ketoinvestor
@Ketoinvestor Жыл бұрын
Maybe even get a light gray or white one 👍
@warrenmichael918
@warrenmichael918 Жыл бұрын
I see this around here, guys that are installing metal roofs on houses do this.
@oscaralameddine4161
@oscaralameddine4161 Жыл бұрын
Mate what a great video I’m a builder In Australia your a great roofer and I loved it we don’t have that tape in Australian can you please send me more details of it
@mattwilkins1597
@mattwilkins1597 Жыл бұрын
For extra sealing put a bead of sealant around the pipe before you pull the boot down. It will help seal that lip of the boot.
@travisst-jacques.4838
@travisst-jacques.4838 11 ай бұрын
I seal the pipe with silicone as well in case ice breaks the boot 10 years down the road .
@kerryzahn908
@kerryzahn908 Жыл бұрын
Brilliant 👍 could you please do this same thing “video “for a hidden fastener tin “pro snap “ thank you
@GrumpyGustav
@GrumpyGustav Жыл бұрын
I can even be the first to thank you for another great video.
@steveholder7289
@steveholder7289 Жыл бұрын
I second that!
@gardenman3
@gardenman3 Жыл бұрын
I have always wondered why he puts the roofing screws in the valley instead of on the ridges
@MistAtsiM
@MistAtsiM Жыл бұрын
One day I'll build me 1 of these. I'll know how to do it too cause I've seen all it damn videos 😂 We do Residencial and commercial finish work mostly
@christian9733
@christian9733 Жыл бұрын
It wouldn't hurt seal the pipe to the metal roofing before installing the boot ( just extra protection).
@johnnichols2710
@johnnichols2710 10 ай бұрын
Thats a monstrous vent for residential
@Californians_go_home
@Californians_go_home 10 ай бұрын
Not if my old girlfriend is using the facility.
@LearnHowToWipeYaArse
@LearnHowToWipeYaArse Ай бұрын
Imagine the smell!
@robertlaird6746
@robertlaird6746 Жыл бұрын
Nice work. I'd like to see what the best method would be on a hidden fastener metal roof.
@christopherhaak9824
@christopherhaak9824 Жыл бұрын
On a hidden fastener roof, you have 12-16" between ribs. Most boots will fit between with diamond installation.
@NathanReichMusic
@NathanReichMusic Ай бұрын
great video. could not find "double bead" butyl tape anywhere... just butyl tape.
@Poorehouse
@Poorehouse Жыл бұрын
Could have used this video yesterday when I drilled my roof for a vent - and dropped the vent right in the middle - damming up the area between two ribs. Dang it.
@jimrowland8310
@jimrowland8310 Жыл бұрын
How many years before that butal tape and lexal break down with the sun and cold air on them?
@brittonm.9462
@brittonm.9462 Жыл бұрын
Mike Holmes did the diamond boot way back in the day.
@TheLingonator
@TheLingonator Жыл бұрын
is the gap in the butyl tape wide enough that it leaves the valley of the rib open to drain? if its just ontop of the rib surely the valley just below it, is the low point right?
@e7cortez
@e7cortez Жыл бұрын
A New York City mostly flat roof. We need a roofer quick dry cement, hot tar tar paper is a project.
@Ketoinvestor
@Ketoinvestor Жыл бұрын
Belt + Suspenders! Nice, and I see absolutely no problem with that install. My question, maybe for a larger boot with more edge to lay down, what if you used straight pieces of mending plate AKA framing angle to really lay on top of the boot and put pressure down into ‘the valley’ of that double-bead butyl tape in a continuous way? Would that actually provide extra insurance or just cause unnecessary work/problems?
@warrenmichael918
@warrenmichael918 Жыл бұрын
Im thinking the plate or angle would be just adding another piece to a puzzle that doesnt need to be there.
@nathancloutier6219
@nathancloutier6219 Жыл бұрын
what if an exhisting piece comes through the center and not on a rib? do the ehisting protrusions need to be modified or whats a good alternative?
@medamit
@medamit Жыл бұрын
What happens when you have to replace it? The screws being so close together like that you would have to try and hit the same holes. What would you do in that situation? Asking because I have to replace one and the screws are right next to each other and there's no room between them for new holes.
@Kenny-fuutball
@Kenny-fuutball Жыл бұрын
We always use the round boots I never knew they even make metal roof boots square
@hustlin513
@hustlin513 2 ай бұрын
I recently bought a home that needs the boots replaced. The pipes are placed where they aren't on the rib so some "daming" could occur. Any tips for how I should help prevent that? I already purchased some circular boots to replace the old ones.
@wavewave9421
@wavewave9421 Жыл бұрын
How come you don't put the pipe there before the sheating? That's how we do it in Norway. We give a meter of pipe with a siga fentrim grommet and some insulation before they start doing the roof
@redsresearch
@redsresearch 7 ай бұрын
wouldnt you want to seal the bottom as well from wind driven rain or snow?
@157-40_T
@157-40_T Жыл бұрын
Why does the code mandate thru top of roof vs side of structure?
@adanperry1642
@adanperry1642 Жыл бұрын
how was is it to put a flashing over that from the ridge down? that way it’ll last more than 5 years
@Yesterdie02
@Yesterdie02 6 ай бұрын
do you not use sheet metal and fabricate flashing for vent pipes "?
@lesterwatson8519
@lesterwatson8519 Жыл бұрын
Looks good
@bertscharff7844
@bertscharff7844 Жыл бұрын
Hole hawg Kyle. #savethebruises
@scottdieboldsr.3594
@scottdieboldsr.3594 Жыл бұрын
What is brand of butyl tape all I can find is joist tape?
@ericamlin1460
@ericamlin1460 Жыл бұрын
👍
@salvagecowboy
@salvagecowboy 5 ай бұрын
I'm trying to source the butyl tape. Could you help me?
@lorainejenson1724
@lorainejenson1724 Жыл бұрын
why dont you seal the pipe to the metal before the boot?
@scottpiatek5687
@scottpiatek5687 7 ай бұрын
Round boot , center between ribs, seal pipe to panel and let dry caulk and install boot , no putty tape here.
@GoatZilla
@GoatZilla Жыл бұрын
Is that really code that plumbing vents can't go out the side? I thought it could go out the side as long as it didn't terminate underneath the eave.
@dosadoodle
@dosadoodle Жыл бұрын
I'm also curious about this. I've seen videos from reputable people, such as Jake Bruton and Scott True, vent out the side and then up as you described.
@RRBuildings
@RRBuildings Жыл бұрын
Depends where you are and what an inspector allows
@Ed-jg3ud
@Ed-jg3ud Жыл бұрын
Moral of the story- be exacting and particular in the design phase about venting everything thru vertical side walls to avoid horizontal roof vents & get code approval. If u truly want the bomber install that is by far the best and well worth it strategy
@bertscharff7844
@bertscharff7844 Жыл бұрын
UPC allows side venting. Upsize in freezing zones + bird screen + opening’s (windows, doors, soffit vents) min distance. My metal roof has zero penetrations. Furnace, dwv vents and gas fireplace all side vents. Don’t let your plumber get away with the easy path
@NHPlumber
@NHPlumber Жыл бұрын
As a plumber, I was taught not to use PVC through the roof on a metal roof. When ice and snow slide down, it can cut off the pipe. If you live in an area that doesn't get snow, then I guess it doesn't matter.
@christopherhaak9824
@christopherhaak9824 Жыл бұрын
He's about five feet from the peak here, not an issue.
@josephhfry
@josephhfry Жыл бұрын
ICC P3103.1 clearly allows venting out a sidewall. When I build, I will not be penetrating my roof... I will go toe to toe with the building inspector if I have to. A single penetration like that can turn a 100 year roof into a 5 year roof.
@daveklein2826
@daveklein2826 Жыл бұрын
😂😂😂😂
@TheWilber09
@TheWilber09 Жыл бұрын
Surprised you didn't counter flash over top of that with a aluminum cap, keep the sun off the rubber and degrading it and another barrier for water emtry on the pvc/ rubber interface
@bobbrinkerhoff3592
@bobbrinkerhoff3592 Жыл бұрын
I've seen several comments about putting a metal cap over the boot to protect it from UV rays , what about using Armor All instead ?
@warrenmichael918
@warrenmichael918 Жыл бұрын
sure, if youre up on the roof every other week doing a wash n wax on the old Buick i guess! LOL
@bobbrinkerhoff3592
@bobbrinkerhoff3592 Жыл бұрын
@@warrenmichael918 considering that this is an exposed fastener roof , and you really should get up there twice a year to check on the screws and washers to prevent leaks , it wouldn't be that much more effort to recoat the boot while you're up there . One of those little things they forget to tell you about when selling you an exposed fastener roof vs. standing seam .
@warrenmichael918
@warrenmichael918 Жыл бұрын
@@bobbrinkerhoff3592 people aint doing none of that! LOL should they, sure,,,do they, no
@bobbrinkerhoff3592
@bobbrinkerhoff3592 Жыл бұрын
@@warrenmichael918 at least once , cause even the best of the Amish crews will miss getting a couple of those screws and washers tight . Then you stand there wondering why your new roof leaks .
@warrenmichael918
@warrenmichael918 Жыл бұрын
@@bobbrinkerhoff3592 I hate exposed screws on metal roofs, even if installed correctly, the heat and cold expands and contracts the metal and the screws loosen up or makes the washers fail. My old barn has an aluminum roof on it, weird i know, but they used it around here in the mid 80s. It was all ring shanked nailed but the washers were all bad when i bought the place. We replaced all the nails that were loose with screws and just a few years some were loose again.
@Discovery123.
@Discovery123. Жыл бұрын
I have seen some vents have vent caps some don’t, is that normal?
@warrenmichael918
@warrenmichael918 Жыл бұрын
The sewer vent will allow rain to just go right on down with the pee pee water, no problem.
@aaronmdjones
@aaronmdjones Жыл бұрын
@@warrenmichael918 It is a problem if small birds or rodents get into it; you may find them crawling out of your toilet.
@lewisspurr9167
@lewisspurr9167 Жыл бұрын
Is this w.a ? Strange not to see the ridge scribed especially a lower pitched roof
@lewisspurr9167
@lewisspurr9167 Жыл бұрын
Also it's not code to use a holesaw it creates a bur on the edge of the tin causing it to rust quickly, drill a smaller hole with a step drill bit or something trace your hole and cut it with your snips
@whateverittakes5580
@whateverittakes5580 Жыл бұрын
is a 4" vent normal? I usually see 1.5 to 2" vents.
@aaronmdjones
@aaronmdjones Жыл бұрын
It depends on the local plumbing code. Some require the vent for the main soil pipe to be at least as large as it, and you won't find a soil pipe under 3 inches.
@solomonlastra657
@solomonlastra657 Жыл бұрын
Where do you get the double bead tape?
@fidgetteneckwedge1418
@fidgetteneckwedge1418 11 ай бұрын
Home Depot is where I found some in the wild here
@SunChips24
@SunChips24 Жыл бұрын
Angle of plumbness 😂
@barry7391
@barry7391 Жыл бұрын
I am in awe of your workmanship and attention to detail, but that roof vent application is a frankenstein nightmare! You can't be happy with the way it looks. Hope someone can come up with a better solution.
@fidgetteneckwedge1418
@fidgetteneckwedge1418 11 ай бұрын
Function over beauty is what I'm hoping for?
@theqerry1402
@theqerry1402 Жыл бұрын
Just glue it .
@beachboardfan9544
@beachboardfan9544 Жыл бұрын
I'm sure that works fine, but theres gotta b a better solution than that.
@gardenman3
@gardenman3 Жыл бұрын
I am supprised the roofing company does not make a boot for the roof
@jacksimpson259
@jacksimpson259 Жыл бұрын
Mate pleas pleas stop putting the roofing scrues through the tray/low point of the roof pleas do it though the ridge or the top as they can’t leak up there as they can when on the bottom
@justinmanship5431
@justinmanship5431 Жыл бұрын
I had come across this video a while back. They basically say not to fasten to the deck and not to apply the boot to a rib. It it falls on a rib they have a different detail for that. What are your thoughts on this? kzfaq.info/get/bejne/fuBhbKR9qraUp3U.html
@genio1981
@genio1981 Жыл бұрын
They're talking about standing seam. What he's dealing with in this video is not a standing seam roof.
@justinmanship5431
@justinmanship5431 Жыл бұрын
Yeah, I did notice that. Seems to me it would still apply though? I’m not in the trades so just curious.
@MrJramirex
@MrJramirex Жыл бұрын
We humans can carry the entire history of our world with one hand and yet, we still use this freaking ugly looking plumbing roof boot style. There has to be a better way. *Just to clarify, Kyle did an amazing job on the install. My comment is about how beautiful metal roofs are somewhat ruined by the ugliest roof flashings in the history of mankind.
@TheJbusy
@TheJbusy Жыл бұрын
Boy. That is ugly. 😂 good thing it’s up high on the roof.
@mrsbradpittiful
@mrsbradpittiful Жыл бұрын
The vent pipe boot thing is putrid and will 100 % fail over time. Make up a metal flashing
@seanheard3702
@seanheard3702 4 ай бұрын
On a plastic pipe??
@leevaughan8368
@leevaughan8368 Жыл бұрын
Please stick to metal buildings because siding and interior anything is not your field. Check your screw lines
@newenglandman2413
@newenglandman2413 Жыл бұрын
1:57 and 2:12. Damning of the Water ... classic first step in the spiral to godlessness and hedonism. Text books say the next step is the damning of the metal. 3:38 There's no hope after that. Get help.
@dashingboy11
@dashingboy11 6 ай бұрын
Very thorough and helpful construction and stylish Shed Plans! kzfaq.infoUgkxcLVQopTIucrxiVRQA0khLGQEnDVKCSMG Numerous examples of different shed styles . Other may feature more styles, but this was the best Ryan's Shed Plans I found that gave a good sampling and a lot of good information about actually constructing a shed.
How to Install Rubber Vent Pipe Boot on Metal Roof Super Easy
7:18
RR Buildings
Рет қаралды 420 М.
Installing Pipe Flashings on Metal Roofs
21:16
RoofingIntelligence.com
Рет қаралды 92 М.
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Паша Осадчий
Рет қаралды 10 МЛН
Идеально повторил? Хотите вторую часть?
00:13
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 10 МЛН
Installing a Metal Roof: Farm Chains 4
25:35
RR Buildings
Рет қаралды 430 М.
10 Reasons Why You'd FAIL a Plumbing Inspection! | GOT2LEARN
7:36
HOW TO INSTALL A METAL ROOF
45:59
Life's Apprentice
Рет қаралды 441 М.
Building a Hunting Cabin 21: Metal Valley and Hip Details
19:47
RR Buildings
Рет қаралды 3,4 МЛН
How To Cut An Ellipse For A Round Pipe Through A Pitched Roof
7:44
Herrick Kimball
Рет қаралды 73 М.
Vent Plumbing Through Roof - Pipe Boot Install - DIY Plumbing
8:15
Country Girl Living
Рет қаралды 32 М.
Chimney flashing on a metal roof.
7:51
Plank Roofing
Рет қаралды 111 М.