Brief explanation on starting a pneumatic blower and sand unloading.
Пікірлер: 67
@kiddetroit840310 ай бұрын
I've hauled a lot of sand this guy really knows what the hell he's talking to mine explains it awesome simple and to-the-point good job bro
@848Terry5 жыл бұрын
Very well explained . I am starting a new driving job doing dry bulk and now I have a pretty good idea of what to expect and how things work. Thanks!
@hectordem08 Жыл бұрын
Excellent video. You are clear, well trained and you know how the tank works. Nice video. Just one tip, use a wire or rope to tie up the blower hose, because the camlocks can open due to vibrations and gravity, releasing the hose and the connector end can hit you.
@EMANUELE3163 жыл бұрын
Very informative! This video is helping me to decide to drive tankers.
@itsrobable3 жыл бұрын
This is the third video I've watched about how to run a Pneumatic, and this time now I'm finally confident I understand everything. Very well explained, OP, you did a fantastic job at teaching. I very much appreciate your video.
@mobilechief5 жыл бұрын
Thanks for the refresher its been years for me
@kenworthvspeterbilt52382 жыл бұрын
I've done pneumatic cement jobs and I find this video very helpful to those who are getting into this business. I worked for Riverside Concrete and it was a hell of experience for me. I've learned so much but I ended up quitting due to lack of equipment. Sand trailers way better than Cement especially when you get clogged! It gets dirty and you'll have to clean all your lines before restarting the process of unloading. Thank you sir for such video. Be safe
@carlosmartinezjr122 жыл бұрын
Thank you
@harjotgill30872 жыл бұрын
The best explanation I found on internet 👍
@9891BR4 жыл бұрын
God bless your heart Sr. Thank you.
@walterdye72644 ай бұрын
Very useful video appreciate it brother
@AshesnDust835 жыл бұрын
Going to work in west Texas for a company that uses Pneumatic trailers. Very helpful.
@gabrielneculau76115 жыл бұрын
What company?
@AshesnDust835 жыл бұрын
Looking at 3N.
@chuckles29935 ай бұрын
Thanks a million for your video! Very helpful!
@simonsez0694 жыл бұрын
Recently started dry bulk, but my trainer didn’t explain the aeration lever. Thanks for clarifying
@hectorgarcia-zv1wi4 жыл бұрын
What the name of your comapy
@shbt88754 жыл бұрын
Great video of explaining it..
@tonytorres16244 жыл бұрын
Great explanation,thank you.
@zapatajz13 жыл бұрын
Thanks for the video I'm learning as i go
@abelnatal40 Жыл бұрын
I LIKE HIS SAFETY BOOTS
@redtoprich24 күн бұрын
Great video
@AnthonysResurrectionGarage2 жыл бұрын
Bro!! Amazing explanation. 👍🏽
@janekeila3 жыл бұрын
very good explanation, thank you
@joshuaboyd9249 Жыл бұрын
Great video brother
@sisbrogaming1072 Жыл бұрын
It was helpful bro🤘🤘🤘
@surajdon3443 Жыл бұрын
Good one..
@anthonylawrence2094 Жыл бұрын
Thanks, very good explanation
@bradleyogden5688 Жыл бұрын
Thanks a lot for doing this. I'm building a model train layout, when finished it will be modeled after a small industry with just a locomotive or two. No reason to build a large bulk sand storage area when you have extra trailers on hand. Are these trailers built so that when they are full can they be dropped and be off loaded when needed or should a tractor or maybe a two axle dolly be used to support the front end? The trailer will be dropped near the shop building with a pressurized air line near by which will pressurize the trailer and off load to a storage bin located above the the rail. From there it will be be gravity fed down to the locomotive.
@danielgalvan79992 жыл бұрын
Hi great video, do you know how to intall the blower, or can you meke a video on how is installed the blower under the truck
@KingDrefromDaA4 ай бұрын
This would be a good video but I just wish he was walking us through what/why he's doing
@user-vj8bf5ye4c11 ай бұрын
Hey bud, great video! Do you know of any Pneumatic Tankers that service Maine and Vermont? I have a client who is starting a big project up there and am looking for carriers. Be safe out there!
@dano1234v2 жыл бұрын
I see you don’t have dot tape on fenders, his that correct?
@carlosmartinezjr122 жыл бұрын
Correct, I didn’t have DOT tape. These were new pneumatic trailers and I believe I drove like that for about a year and a half. And I didn’t have any issue with it but during that time I probably went into the DOT inspection station once and they let me right through. Something about West Texas there’s so much Oilfield traffic they look at other stuff trucks that don’t operate correctly, and for some reason I think DOT didn’t see it as a big issue. It was not until I got my own trailer that I bought DOT tape and I will make sure that it was 50-50 all the way across the fenders and the trailer. Thanks for the question.
@iamdatnigga1003 жыл бұрын
Can I do this with my Automatic frightliner??
@carlosmartinezjr123 жыл бұрын
Yes you can set your automatic up with the same equipment. The blower and PTO. I paid about 8500 blower and PTO installed through finance. If you want to get into this work with just pulling a trailer, you should look at Haliburton Sand Box. I also have a blower and PTO that I can sell. I drive over the road now and have no need for it.
@iamdatnigga1003 жыл бұрын
@@carlosmartinezjr12 bradley.337harris@gmail.com email me let’s talk
@trucktrailerparts5 күн бұрын
cement trailer aeration airslide pipe hose for cement bulker
@Bossmantrk Жыл бұрын
Hey are you still working and the oil field
@carlosmartinezjr12 Жыл бұрын
No I’m driving over the road now.
@omarrangel31235 жыл бұрын
How u turn the blower on
@carlosmartinezjr124 жыл бұрын
Blower start: 1. With vehicle running and parking brake on. engage the clutch. 2. Put it in gear. (1st or reverse) 3. Engage PTO. (It can be a switch on your dash or floor board next to your seat) 4. Put back into neutral. 5. Slowly release clutch. 6. Blower should be running after you release the clutch. 7. When your hoses are connected outside and to your blower you can increase RPMs.
@shbt88754 жыл бұрын
Carlos Martinez what if your in automatic truck and don’t have a clutch, how do you turn the blower on then?
@earljohnson9184 жыл бұрын
@@shbt8875 depends, had a Cummins with a 13 speed auto with it step on brake , place in drive, engage PTO, shift back to neutral, release brake. New truck is a Paccar with it I just flip the PTO switch.
@carlosmartinezjr124 жыл бұрын
@@shbt8875 I have never used an automatic but the procedure is similar. Vehicle in gear with parking brake reverse or drive. Press on foot brake and engage PTO switch. Release the foot brake and the gears in the PTO and transmission will engage the blower drive shift. Rev up engine to 900 to 1100 hundred RPM
@carlosmartinezjr124 жыл бұрын
There are different types of auto transmission. Ultra shift which works like a regular standard and automatic transmission like a regular car. So putting it neutral might differ. If the truck wants to move forward then you need to go back into neutral after engaging the PTO
@kiddetroit840310 ай бұрын
You need a 5-foot ER😂 homie
@MegastarKaran3 жыл бұрын
The blower doesn't need to be warmed up because it already starts warming up p.s. my blower heats up after I turn it on
@albertocordova80433 жыл бұрын
7:51 what was that that sound
@carlosmartinezjr123 жыл бұрын
I don't know but I'm laughing
@albertocordova80433 жыл бұрын
@@carlosmartinezjr12 hahhaha
@horaciocampos65202 жыл бұрын
😂😂😂😂😂😂
@kiddetroit840310 ай бұрын
Hey bro tell him what it's like to unclog a 20-foot hose full of sand😂
@hectorgarcia-zv1wi4 жыл бұрын
What the name of your company
@carlosmartinezjr124 жыл бұрын
This company is Rickman transport out of Springtown Tx. I no longer work with them but I have been hearing they are doing good.
@hectorgarcia-zv1wi2 жыл бұрын
Tht right
@user-yi2nn2xs6h10 ай бұрын
😅
@user-yi2nn2xs6h10 ай бұрын
😅 max speed but I set it at 1200
@jerryalbers333 жыл бұрын
How many lbs of sand do you carry? And what kind of sand ?
@carlosmartinezjr123 жыл бұрын
Hey Jerry, usually it's near 48,000 lbs. The sand can vary from 100mesh, 40/70 grain sand.
@jerryalbers333 жыл бұрын
I used to haul a 5axel with dry cement. Is it specialty sand for manufacturing or something? Im just wondering what industry it’s for ?
@johnysilver18533 жыл бұрын
Complicated. Sound like need to take course how to operate them
@carlosmartinezjr123 жыл бұрын
Usually you can go out and learn from the guys working along side you on they're trucks. It should take about a day or three runs before you get comfortable with the basics. All I mention in the video is just to get an understanding of the tanker.