syncing in the edit page is just so much better for me because it gives me way more controll than the sync bin. If anything doesn't work in the sync bin, the entire video is done.
@CameraTimАй бұрын
@@benmagnus0858 The Sync Bin, when it works, is really nice, but it does tend to have more issues syncing than the Edit page method for whatever reason.
@Directorkey7185 ай бұрын
Thank you! I'm literally applying to a video podcast editing job and I'm so used to cutting short films in Davinci that I didn't know about this workflow until I searched and found your video! Now I feel confident I can do the job with speed and accuracy! Thanks Tim!
@CameraTim5 ай бұрын
You love to see it! So glad I could help!
@niandongrox16 күн бұрын
incredibly helpful, thank you for making this process so clear
@CameraTim16 күн бұрын
@@niandongrox You’re welcome! And thank you for enjoying it!
@guymross2 ай бұрын
Thanks - I didnt realize you could create plugins directly in Fusion. Excellent video!
@CameraTim2 ай бұрын
Thank you so much! Yeah, I haven’t done as much content on creating your own plugins, but I should eventually. I know Patrick Stirling has done a couple videos on it.
@HansCNelson5 ай бұрын
Thanks! The multi-track sound and two camera collage sections were really helpful.
@CameraTim5 ай бұрын
Thank you! Glad those sections were useful!
@schnellkannjeder9 ай бұрын
Mega tutorial very helpful....unfortunately I'm bothered by your picture in picture in the left corner, it would have been better in the top right...
@CameraTim9 ай бұрын
Glad it was helpful! I’ll keep the camera position in mind
@TheEasyWay8 ай бұрын
Didnt know Gerard Butler had a Resolve KZfaq Channel 🍻
@CameraTim8 ай бұрын
This is…. RESOOOOOOOOLVE
@musiolikart4 ай бұрын
Thanks for the Video, I have to practice the change of the timelines and had some issues with switching. Learned a lot
@CameraTim4 ай бұрын
I’m glad this was helpful! Thank you!
@FrancescoPaggiaro5 ай бұрын
Love the tips about switching angle and cut with numbers and the numberpad. Thanks for the help, I have a 10 people interview for a small doc and I need to edit fast all the interviews
@CameraTim5 ай бұрын
Glad these helped! The Cut and Switch shortcuts save tons of time, it’s actually nuts.
@shootingtriophotography11 ай бұрын
Super helpful, thanks for making this.
@CameraTim11 ай бұрын
Glad it was helpful! Thank you!
@FATBS8 ай бұрын
Thats the best tutorial on multicam editing that I have ever watched! I finaly fucking get it, how multicam works! HUUUUGE THANKS to you Tim! Your other videos are also very helpful by the way! Great content! Whish your channel to grow up!
@CameraTim8 ай бұрын
Thank you so much!! So glad I could make a weird concept into something simple!
@jaybillups20637 ай бұрын
Agree! I’m coming from PP and learning Davinci ... this makes total sense to me.
@CameraTim7 ай бұрын
@@jaybillups2063 Amazing! Glad I can help the transition!
@JozuEdits4 ай бұрын
Thanks for the help! Have you made a video on how to make that fusion setup?
@CameraTim4 ай бұрын
No problem! And no, unfortunately haven’t made it yet. It’s still on my to-do list, but I have so many other projects that are taking precedent right now sadly.
@SantiYounger6 ай бұрын
Can you please make a tutorial on this 23:11 I've been looking for something like that for ages! Thank you!
@CameraTim6 ай бұрын
I’ll add it to the list of videos to make! Definitely want to start making some plugins like this.
@SantiYounger6 ай бұрын
@@CameraTim that's be awesome thank you
@CameraTim6 ай бұрын
@@SantiYounger Of course! Hopefully I can get to it sometime soon!
@SantiYounger6 ай бұрын
@@CameraTim Thank you truly appreciate that!
@CameraTim6 ай бұрын
@@SantiYounger No problem!
@heissjason26054 ай бұрын
Thank u sir
@CameraTim4 ай бұрын
You’re welcome sir
@matthewseneker1383 Жыл бұрын
My favorite part is where you edited the podcast
@CameraTim Жыл бұрын
That part almost didn’t make it into the final cut.
@stephenthompson3309 Жыл бұрын
My favorite part is where Tim hugged me. ... Not of the video, though, of my life. ... but also not in a creepy way.
@CameraTim Жыл бұрын
@@stephenthompson3309 Accurate.
@RabeChristopher10 ай бұрын
would you share that fusion setup you made, that is slick!
@CameraTim10 ай бұрын
I definitely need to rework it with where Resolve is now, especially because it's a very janky tool with what I made it for (not a ton of room for customization), but I do really want to build it out more and start releasing some tools similar to this. That'll probably be a future video! But just as a concept, if you haven't used Custom Controls on nodes, that would be a good place to set custom parameters that can be parented to other adjustments. I might just do a video on that concept right there. *starts writing more ideas*
@morsecodebox7722 ай бұрын
I just can not get this to work. Every time I get to the stage where I try to sync the clips, the auto-align clips option is greyed out. I have tried everything. The worst is when I use the traditional way, the clips are just not syncing, so I was hoping this way would help. Do you have an idea of why the option will not work on the edit page? Using 19 Studio.
@CameraTim2 ай бұрын
So the biggest reason I know that the option is grayed out is if you select multiple clips on the same layer. When you make the selection to sync the clips, make sure you're not accidently selecting clips in the same layer (even if it's just a cut on the same clip). That would be the first thing I'd try, if that's the case, I might need more info on the clips and audio.
@user-yf8tt6ii7o11 ай бұрын
Nice solutions! Thanks.I didn`t know that I can sync more than 2 clips in Davinci.Also thanks for switch to different multicam clip and active selection shortcut! I`m working 2 years as editor and I tapped all the 2 years D key in order to select clip under playhead.Also maybe you know shortcut to select few clips, but select them forward/backward every clip I want to select, not all before/after playhed. What is the name of option that pinned for you as (Shift + D)? I can`t find that Also, may you write all shortcuts as text? It would be helpful cause some of other shortcuts I can`t find too and I don`t know their names
@CameraTim11 ай бұрын
I'm glad these tips helped! As far as the shortcuts you're asking for, I'm not completely sure what you're referring to with the first one, unless you're talking about selecting a range of clips without selecting everything before/after? I might need more clarification on that one. Shift + D is: Select All Clips Under Playhead For any of the other shortcuts that show up, what you can actually do is go into the Keyboard Customization tab, and click on that key or keys to see what that shortcut is called. If I don't specify a default binding, then that's the default and should show up for you (outside of C, I only verbally specified that one. The default for Split Clips is Ctrl+\ ).
@user-yf8tt6ii7o11 ай бұрын
@@CameraTim Thanks for your answer I just binned "select clips under playhead". About my question to select clips : I don't know is it possible, but in my imagination I this option like this: I'm selecting one clip with keyboard, hold Ctrl (order to select next neighbor clip forward or backward) and click something.After that second clip is selected and If I wish I click this option from imagination to select next clip)) Now I have 3 clips selected. After 2 years I'm using shortcuts against mouse as much as possible.Remember that pain in my right hand when on my start I didn't knew any shortcuts and did almost everything with mouse
@CameraTim11 ай бұрын
@@user-yf8tt6ii7o Currently I don't know of a shortcut that does exactly what you're describing. It would have to be in a script at the current state of Resolve. The only one I know of that's close selects the next clip in the timeline but doesn't keep the previous one highlighted. You can find this shortcut when you're in the Keyboard Customization tab under Commands, select Edit, then scroll down to where you see Select, drop that down, and you can add shortcuts for Above, Below, Next, and Previous.
@user-yf8tt6ii7o11 ай бұрын
@@CameraTim thanks for your help!
@CameraTim11 ай бұрын
@@user-yf8tt6ii7o Absolutely!
@rautsh2dia-um2ei3 ай бұрын
please excuse the lack of proper terminology in advance, but is there a way to somehow create a "camera view" out of a split screen? say, how you switch between camera 1, 2 and 3 by pressing the numbers on the respective numbers on the keyboard in the first example, is it possible to add split screen1 and split screen 2 (from second example) to keyboard number 4 & 5? so keyboard number 1,2&3 are the single cameras, and keyboard number 4&5 are split views. but the entire editing is done like in the 1st example, just with the keyboard numbers? i so hope this makes sense :D
@CameraTim3 ай бұрын
Ah, I think I know what you're going for. If I understand correctly, you want a "camera" to be a split screen of multiple cameras. There are a couple ways to do this, but the easiest way would probably be to highlight whichever clips you want to have in your split-screen view, right-click and make it a Compound Clip. Then hold Alt and drag it to a new layer above (so if you had three cameras, you'd drag it to layer four) which will duplicate it. Right-click your original Compound clip, and select Decompose using Clips Only for both video and audio, which will restore your original camera angles. Then you can go into the Compound Clip you created by right-clicking it and select Open In Timeline, then you can position your split screen however you want, then that becomes your fourth angle.
@rautsh2dia-um2ei3 ай бұрын
@@CameraTim thank you very much for the input! will try this as soon as i have a chance
@CameraTim3 ай бұрын
@@rautsh2dia-um2ei Sounds great! Let me know if you run into any issues!
@jessicaangeline4 ай бұрын
So I got my two clips into the multicam view, and I've duplicated the audio channel, but I can't seem to make the second channel actually take the audio from the second video... based on what I saw on your video, you just clicked the channel and clicked "Num 2", "Num 3" but that didn't work for me. Can you be more specific please?
@CameraTim4 ай бұрын
Yes, it’s based on wherever layer it’s in within your Multicam clip. So if your second camera audio is on layer 3 inside of your Multicam clip as an example, then you’ll want to set just that audio layer in your normal timeline to Camera 3, because that’s the layer it’s looking at.
@MetroDubsCo8 ай бұрын
Stupid question... Are you opening multiple instances of OBS to record the overall feed and your feed?
@CameraTim8 ай бұрын
Not a stupid question at all actually. There are multiple ways I do it, but the primary two are recording the display with my normal OBS canvas, and recording the webcam with the Vertical plugin (and just changing the resolution to match it because you can use horizontal resolutions). I also sometimes just record in-camera as well, especially if it's going to be a shorter video or if I know I'm going to do some GPU-heavy effects. There are a few other ways to do it, like using the Source Record plugin, an external recorder (a monitor that records like an Atomos if you have one), or using a second PC if you have one to pull the feed, either with a capture card or NDI. If I need to record OBS itself, I'll just pull the Vertical plugin onto a different monitor and record the screen with that.
@MetroDubsCo8 ай бұрын
@@CameraTim Right. I forgot the native interview software (i.e. riverside) records each user feed. great. thanks for the answer. I just found your video yesterday. Going to subscribe on my other account. Thank you.
@CameraTim8 ай бұрын
@@MetroDubsCoAwesome! Thank you!
@jaybillups20637 ай бұрын
FYI - The timeline command "Convert ... to Multicam Clips" you showed doesn't appear if you have "Use Timelines Bin" enabled and you're in the timeline bin. I had to create a shortcut to access the command.
@CameraTim7 ай бұрын
Ah, that's good to know. I never tested Timeline Bins because I just import my folder structure straight from the Media Storage window, but that's something I can definitely look into for a workaround.
@jaybillups20637 ай бұрын
@@CameraTim thanks for the reply. Might be a bug, but the shortcut worked.
@jaybillups20637 ай бұрын
@@CameraTim now, do you know if DR can do text-based editing in the time line? I can in PP, but haven’t found a way in DR.
@CameraTim7 ай бұрын
@@jaybillups2063 Glad the shortcut works around it! Could easily be an oversight. Similar to the Source/Program viewers on a single monitor display. As far as the Text-based editing, you can in the Studio version with transcription. When you right click a timeline or media source in the Media Pool, you can Transcribe it, and then in the Transcription window, you can highlight and cut clips based on text.
@jaybillups20637 ай бұрын
@@CameraTim Thanks. Just tried it. The transcript generated and it seems to mark the locations I have highlighted with IN and OUT, but I have to figure out the details. I'll play with it a bit more and let you know. I'm working on a multicam timelime. Cheers
@BizzographyАй бұрын
5:24 when I drag the file, there is video but no audio :( , Help please
@CameraTimАй бұрын
Does the audio layer show up without audio, or is there only a video layer?
@Bizzography24 күн бұрын
@@CameraTim Yes the sudio layer shows up.
@CameraTim24 күн бұрын
@@Bizzography It sounds like it’s either referencing the wrong audio track or you have the track muted in the multicam clip.
@FATBS8 ай бұрын
9:50 can you please explaine how this cut to work? i have 1,2,3,4... selected as cut to, but when i press one if them it only swithe the camera but not making cut as it is hapenning here in your video. Please help me to get how to make it work. Thank you!
@CameraTim8 ай бұрын
So ensuring your keyboard shortcuts for Cut To and Switch To are different, which sounds like what you’ve already done, would be the first step. The second is making sure you have the multicam view pulled up in your Source (left) viewer, otherwise the cut shortcut won’t work. I can run a couple other tests to see if there’s any other reason it wouldn’t work.
@FATBS8 ай бұрын
" The second is making sure you have the multicam view pulled up in your Source (left) viewer, otherwise the cut shortcut won’t work." That was the problem, i opened multicam viewer i guess in some other way, cos i had 2 windows, but it didn't worke. So when i did it exactly as you explained by turning ON source viewer - everything started working! Huge thanks to you @@CameraTim
@CameraTim8 ай бұрын
@@FATBS Awesome! Glad it’s working! There’s also an unusual bug if you’re running a single monitor setup where the source window and program window don’t want to stay up at the same time unless the Inspector is minimized, although there is a workaround I show in a different video I think.
@FATBS8 ай бұрын
@@CameraTim You helped me to save hours and hours of editing, cos i edit podcasts recorded with 3 cameras, but i did it in regular timeline edit fashion and it was long time editing process, multicam is waaaaay fastrer! Thank you Tim! Yup i work on single monitor, i'll watch your othere videos as well! Have a nice day!
@CameraTim8 ай бұрын
@@FATBS And that’s why I make these videos, love seeing this!
@NotesFromTheExecutive2 ай бұрын
Please please please do not include music in your videos, they're doing more harm than good! So hard to hear and focus
@CameraTim2 ай бұрын
Yeah, I realized that too late. I made that change in the match cameras video, and ever since then none of them have the background music through the tutorial. I really wish KZfaq could give me the option to replace an audio track, but unfortunately it's not possible...
@NotesFromTheExecutive2 ай бұрын
@@CameraTim Thank you for the note, at least you know now, or you could keep this video but re upload another one without the audio. More work I know. But thank you for taking the time to teach us.
@CameraTim2 ай бұрын
@@NotesFromTheExecutive I had thought about that, and that’s actually what I did with the camera matching one, but this one didn’t make sense at the time to reupload, so I just kept it. And with Resolve 19 being out, it would make more sense to just do a new video on it. Oh the joys of tutorials and updates. Haha!
@NotesFromTheExecutive2 ай бұрын
@@CameraTim Oh we know how it is. Joyous indeed. Well you're making a difference in people's lives by teaching them so thank you :)
@CameraTim2 ай бұрын
@@NotesFromTheExecutive I appreciate the kind words. Thank you.