I have a Vizio 65" and with your video i fixed my TV. It took me a wile to figure it out, my TV had a pin problem on the right side of the screen so looking at the Board from behind was the left strip cable just like the video. I cut a piece of tape and the size covered about 4 pins but i started to notice some horizontal lines so i used a volt tester and found the lowest number on the 6th pin from left to right. I cut the tape to just cover 1 pin and worked perfectly. Thanks and hope this helps others, don't know how long it will work but its a start. Will make a video of my problem fixed soon
@mysticroads2 ай бұрын
thats nice to hear ...
@kristinee22292 жыл бұрын
Thank you so much for making this video, I have almost zero electronics experience and just fixed my TV in 10 minutes!
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@Pikefish2 жыл бұрын
I just applied this fix to my LA40D550 which had a stationary, doubled image. First place I tried it worked on the double image but the affected side was dimmer than the good side, so I reduced the size of my tape to about 3mm, and (after a few guess and checks) more precisely blocked the problematic trace/s, this restored the whole image to its normal condition. Hooray! Thanks!
@mysticroads2 жыл бұрын
Thank you soo much for your comments ..lad to know that you have solved the issue ... please subscribe to my channel
@SOPHOCLESIFY2 жыл бұрын
Is the tv still working well?
@Pikefish2 жыл бұрын
@@SOPHOCLESIFY Yes
@alaincarat7002 Жыл бұрын
Tu peux m'aider?
@allisonwonderland51492 жыл бұрын
Thank you so much. I'm just a middle aged divorced lady. Who would normally ask a man to do this for me. But with your help I was able to do it on my own. Thank you...Thank you!
@mysticroads2 жыл бұрын
Wovv 👍👍👍 great to hear that from you
@nijishkumarppgalaxy8987 Жыл бұрын
Hi
@PatrickPannunzio6 ай бұрын
Thanks for taking time to inform us Samsung TV owners (Which I believe provides the most lifelike picture) of these potential fixes.
@mysticroads9 күн бұрын
thank you
@e637696 ай бұрын
This worked like a charm. And it saved me from having to buy a new TV. Thanks!
@alabhyachoudhary7607 Жыл бұрын
Thank you for this video , it saved me a lot of money , I fixed my samsung led tv myself 🙂 , it took around an hour for the hole process
@beausejourmartin2 жыл бұрын
Dear Sir, thank you from Montréal, Canada. Just follow your steps and my tv is fixed!
@mysticroads2 жыл бұрын
Thank u martin , am glad ur tv is fixed..
@KyleGspinnin4u2 жыл бұрын
Thank you! This helped me fix my Samsung I got for free. I have ZERO electronic experience aside from tearing into ssshhhhhhh…shtuff…. When I was a little kid. Didn’t even get it put back together most of the time. On a side note if your screen has a touch button row on the bottom of the tv be extra careful on how things line up when you screw it all back together. The tv works though so thank you very much for sharing your knowledge and not trolling the internet like so many people do these days
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@alkumar62172 жыл бұрын
It worked.....double image fixed as mentioned in the comments, just need to move the tape around and resize to get it 100%. 1st attempt it fixed the double image but was getting right side darker, so moved the 3mm width tape at different points and ta tadaaaaaa....worked. Thanks so much you was very helpful.
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@SudarshanS-pp2rb Жыл бұрын
Thank you very much for making this video,this video was very helpful when we called the technician he said that there was a problem in the display and we would have to replace the display which would cost around 20 thousand Rupees,so we looked up on KZfaq and found ur video this was very helpful. Thank You once again.
@mysticroads Жыл бұрын
Am really glad that you did it 😌👍👌👌
@ansarimohammedsaud39452 жыл бұрын
Excellent trick. Sir thank you so much. With the help of your video i fixed my tv..
@mysticroads2 жыл бұрын
Thank you , am glad ur tv is fixed....
@gregorypepin19002 жыл бұрын
Hi thank u so much I resolve the problem of my Thomson tv with your method. It was so easy . Happy new year !!!
@mysticroads2 жыл бұрын
am glad ur tv is fixed.. happy new year to u tooo
@user-or8by3ew4d2 жыл бұрын
Thank you very much for this informative video. I had a similar problem, and I could fix my Samsung LED FULL HD TV under 15 minutes.
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@richardfletcher88684 ай бұрын
just fixed my Samsung tv with this, i thought i was going to have to throw it out, thank you
@mysticroads4 ай бұрын
thats nice to hear , thank you
@mcdn467010 ай бұрын
It worked on my Samsung TV. I fixed it in 15 minutes. Thank you.
@mysticroads10 ай бұрын
Thats great to hear..
@DonavinNeill9 ай бұрын
This man earned this sub. Ty for posting this fix
@mysticroads4 ай бұрын
thank u soo much
@nagammag3941 Жыл бұрын
Thank you so much. Your video not only help me to repair own in 1st attempt and save lot of money. Please make such videos of possible of other common problem.
@mysticroads Жыл бұрын
Wovv that's great and nice to hear.... Thank you soo much for ur comments... Sure I ll make such useful videos
@alaincarat7002 Жыл бұрын
Tu peux m'aider?
@AlanDAVIDskydive Жыл бұрын
Thanks man, my TV is now ready for ten more years 💪
@mysticroads Жыл бұрын
Great to hear that 😊
@leemartin65706 ай бұрын
Wow I was just about to take it to the rubbish tip but tried this and it worked. I put the celotape in a random place for the left side and it worked first time.
@mysticroads4 ай бұрын
wovv thats nice to hear
@ganeshvenugopal90462 жыл бұрын
Bro, it really worked. Thanks for the solution 🙂
@mysticroads2 жыл бұрын
Nice to hear from you .. that it worked ... Please subscribe to my youtube channel, thank you for you support... 👍🎉
@tomasklecka94982 ай бұрын
Working ! Very good work 😇
@audumbarphadte13392 жыл бұрын
Thank you .. we did the same steps which suggested and successfully fix the issue
@mysticroads2 жыл бұрын
thank u soo much .. am happy to hear that , please subscribe to my channel and like my videos..
@alaincarat7002 Жыл бұрын
Tu peux m'aider?
@le_oliver2 жыл бұрын
Great! Thank you for help us.
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@mericmarquez760 Жыл бұрын
I tried this and it worked Thanks for the info.
@mysticroads Жыл бұрын
Thank nice to hear from you...
@msa_06192 жыл бұрын
Good Morning I have samsung 70" or 80" flat screen TV with a double image. Just like the you shown on your KZfaq video 📹. I'm calling from Houston TX my name is Michael
@mysticroads2 жыл бұрын
you can check my video ,, and troubleshoot
@syedtariqali6042 жыл бұрын
Good information. Thnx sir
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@sushmavarma16802 жыл бұрын
It worked 😀👍 thank you!!!
@mysticroads2 жыл бұрын
great.. am glad that my video helped u...
@johnpatterson83093 ай бұрын
Thank you I'll give it a try
@vylonygo741011 ай бұрын
Huge thanks!
@mysticroads4 ай бұрын
thanks for ur kind words.....
@Praveen-du3wh Жыл бұрын
Thank you
@kam9926 ай бұрын
tq sir. very good. in english.
@mysticroads4 ай бұрын
thank u
@avaxis2 жыл бұрын
Dear Sir, you’re a hero.
@mysticroads2 жыл бұрын
thank u sir
@amitdamphibious84443 жыл бұрын
Awesome video.. I fixed my TV issue
@mysticroads3 жыл бұрын
Thank you bro
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@ghostwavewrider2 жыл бұрын
What pins did you tape? Do you tape different pins if it's a 50 inch screen? Maybe pins 13 to 25?
@mysticroads2 жыл бұрын
Look out for Vg pin track on the PCB , mask those pins
@bobinantony66758 ай бұрын
It worked... Thank you 🤩
@mysticroads8 ай бұрын
thats nice to hear
@donnieraygianchand Жыл бұрын
This works for me. Thank you so much. My wife can now watch Netflix again. @everyone, just curious, because of the tape blocking certain signal/s, will there be another possible display issue? Like, problems with other video display source such as AV, VGA, HDMIs or component?
@mysticroads Жыл бұрын
The Screen side where thr tape is pasted you will find thre will be slight loss of pixels and when you connect the TV audio with amp or home theter there will be intermittent noise screen will go blamk and resume , smtime when i connect my lapop HDMI out to TV i audio will not come in my TV , i have to connect and reconnect the HDMI cable. these problems you might face or you may not. I din face this problem at first but after 3 years am facing this problm. But image jumping problem never came back.. it got solved
@donnieraygianchand Жыл бұрын
@@mysticroads, thank you for this answer. Luckily, I'm having no problems so far but I'll be checking other source to make sure. :)
@animegirl83843 жыл бұрын
Thank you so much..i was able to.fix my tv..
@mysticroads3 жыл бұрын
welcome .. am glad
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@shomyking22592 жыл бұрын
You are the best 😄
@mysticroads2 жыл бұрын
Thank You soo much, please give a like to my video and subscribe to my youtube channel
@levithanprimal24104 ай бұрын
thanks!
@sonnypua59923 жыл бұрын
What a trick master ! Good job.
@mysticroads3 жыл бұрын
Thank you bro
@issacray91243 жыл бұрын
i dont mean to be so off topic but does any of you know a tool to log back into an Instagram account..? I was dumb lost my password. I would love any assistance you can offer me.
@walkermiller36843 жыл бұрын
@Issac Ray instablaster :)
@issacray91243 жыл бұрын
@Walker Miller thanks so much for your reply. I found the site through google and I'm waiting for the hacking stuff atm. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@issacray91243 жыл бұрын
@Walker Miller It did the trick and I finally got access to my account again. I'm so happy! Thank you so much you saved my account !
@anthonywest1962 Жыл бұрын
Hi just wanted to ask is it that board that needs changing. As you should be able to make the connection without the tape normally ?
@mysticroads Жыл бұрын
the T con boardgenerates the noise disturbance signals , by using the tape we are masking off the noise signals , the board can be changed with a good new spare to eliminate this error...
@jandzban2 жыл бұрын
Thank you my man
@mysticroads2 жыл бұрын
thank u soo much .. am happy to hear that , please subscribe to my channel and like my videos..
@ivanvera70273 жыл бұрын
Great explanation..
@mysticroads3 жыл бұрын
thank u soo much
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@eulaliafaessler84942 жыл бұрын
Please my tv is hisense 49m5600cw but doesn’t have a t con just the flex cables going directly to the screen panel
@mysticroads2 жыл бұрын
you have to check the VGA board present in the rear side of the panel
@SHAHRIMMOHD3 жыл бұрын
tq for this video..
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@sbennett15 Жыл бұрын
where do i put the tape on tcon
@nehacgp Жыл бұрын
hello sir, does it have impact on any other parts like display circuit or smart board? is it completely ok to use it with the tape long term?
@mysticroads Жыл бұрын
Yes... It's absolutely fine.. you will notice a mild picture resolution clarity variation on the left or right side if the screen.. I ve been using my tv with the tape past 2.5 years it's working fine
@jordankaren16192 жыл бұрын
Thank you so much
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@pradeepmahendrasemage40432 жыл бұрын
Nice, thanks sir.
@mysticroads2 жыл бұрын
thank u
@mysticroads2 жыл бұрын
Please subscribe to my channel
@manp1039 Жыл бұрын
what do you think is causing the double image flickering? do you think it might be a fault in the ribbon cable? or??
@mysticroads Жыл бұрын
The problem is with the Tcon board or the noise signal from the video processor
@satinathpoddar884911 ай бұрын
Very nice sir
@mysticroads11 ай бұрын
thank you soo much
@bozzy25162 жыл бұрын
My Samsung LED TV started doing this the other day and used this fix. Cant thank you enough it rearly works. My only problem was that I tried the right chanel and that did nothing but tried the left and first time didnt work but moved the tapes and it has worked brilliantly. Has anybody got any idea how long the fix will work for?
@mysticroads2 жыл бұрын
Wovv great to see that you fixed it . Thank you soo much ... 👍👍
@SOPHOCLESIFY2 жыл бұрын
Is your tv still working well?
@yendorsadventures26079 күн бұрын
My samsung has 4 Tcon cables in stead of 2 like you showed. Fixed ghosting but have now got some vertical lines on the screen
@mysticroads9 күн бұрын
the vertical line is caused by the LCD array defect or the cable seating problem , To fix this, simply reseat the cables and ensure that they're securely connected and it cant be rectified
@jebasinghsamuel27113 ай бұрын
Is this technique suitable for TCL.tv
@nopainnogain54882 жыл бұрын
Great job
@mysticroads2 жыл бұрын
thank you bro
@sellvakumaran3 жыл бұрын
Tq bro I have solve my tv problem
@mysticroads3 жыл бұрын
good bro...
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@dindro97782 жыл бұрын
Sir I have similar issue in my vu 43 inch 4k android tv. I have checked it the problem is coming from the right side of the display. I have 3 questions. Is it a tcon board problem or is it a display/panel problem? How many pins I have to block? Will it anyhow effect my 4k hdr picture quality?
@mysticroads2 жыл бұрын
Hi sir, am glad to respond for your queries , Ans Q1: If there is a problem in TCON board you wont get any picture or image , , as you mentioned the problem is with the right side of the panel , i feel that signal going to the right side of the panel from the TCON has to be checked, as explained in my vide , try masking the right side strip cable and check. Ans Q2: You can mask 3 pins from left , leaving the first 2 pins , do not mask the 2 pins on the left or on the right . leave off the 2 pins from left and mask the next 3 pins and check , similarly ckeck on the right side pins by leaving the right most 2 pins , Ans Q3 : Yes slightly there will be slight HD variations on the screen as horizontal lines will slightly visible on the right side of the display panel but it wont be a problem while viewing and viewing comfort will not be affected.. HD quality wont be affected much .
@dindro97782 жыл бұрын
@@mysticroads can I contact you through insta. I will share some image of the board and a short video about the problem of double image. There are two (60pin) connector from the tcon board to the display. As I have told you that the problem is coming from the right side. I have seen your video you are blocking some particular section / signal going through the display to the tcon board. In my case it's little bit different. I will try your method but it will be more helpfull if you can advise me after watching the picture of my tcon board. Anyway Thanks for the reply.
@ismaildapheynshenco46382 жыл бұрын
Thanks for cooking this video
@harisai1473 жыл бұрын
Thank you sooo much
@mysticroads3 жыл бұрын
you are welcome bro
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@larrybluntz96372 ай бұрын
how did you get the spot so quickly ?
@emmanuelokeoghene87163 жыл бұрын
Nice video in English Thanks
@mysticroads3 жыл бұрын
Thank you bro
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@hafifijamil1707 Жыл бұрын
Thanks it's workkk!!!!
@mysticroads Жыл бұрын
Great to hear from u
@kevinneimeyer7902 жыл бұрын
thank you for this
@mysticroads2 жыл бұрын
thank u bro .. for ur comments
@mysticroads2 жыл бұрын
You're very welcome!
@anandm36562 жыл бұрын
Hai sir, how this problem permanently rectified ? Need to replace the t con board or any other component?
@mysticroads2 жыл бұрын
i used cello tape and its working fine more than a year when there is no image or more distortion , i recommend to replace the tcon board
@melanierose98572 жыл бұрын
When I add the tape it fixes the double image but it adds a red line in the screen. The red line wasn’t there before only when I add the tape. Any suggestions??
@mysticroads2 жыл бұрын
try to reduce the width of the tape , and shift the position of the tape , moving towards left and right
@atmnurulanwar Жыл бұрын
I previously fixed screen flickering with putting such tape at right side. Now I have issue with double image again. If the probkem detected in anothrr side, can I put tape on that side also. Please advise.
@mysticroads Жыл бұрын
Yes you can give a try fixing tape on the other side too
@atmnurulanwar Жыл бұрын
@@mysticroads Actually I send it to a repair shop before trying this, they are saying me to replace led panel!
@mysticroads Жыл бұрын
@@atmnurulanwar Just give a try you and try ur luck , it will get definitely solved
@sunilcheldhi56603 жыл бұрын
Tanq sir
@mysticroads3 жыл бұрын
ur welcome
@srisaru19122 жыл бұрын
How to find the position correctly and how to get the correct size of the tape, 5mm or 3mm which one is correct....
@mysticroads2 жыл бұрын
Its a trail and error method , try using 3 mm tape at diff positions , to be precise start from let side
@wilsonlai89363 жыл бұрын
Hi, may i know what kind of tape you are using?
@wilsonlai89363 жыл бұрын
my Tv model is Samsung UA40EH5000R 40 inch LED Full HD TV, same issue double image problem
@mysticroads3 жыл бұрын
i used a normal cellophane tape
@wilsonlai89363 жыл бұрын
@@mysticroads i see. Alright. Can't wait to try it. Hopefully can solve my problem. Thanks for the sharing 🙏🙏🙏
@cremyrodexevil42863 жыл бұрын
Hi, i did that technic but is still flickering time to time … any advice?
@mysticroads3 жыл бұрын
Try wit 3mm width tape at diff positions bro... You can definitely mask off the bad signals
@vinamercado41482 жыл бұрын
What if both side is not good? Can I still use the tape?
@mysticroads2 жыл бұрын
Yes you can give a try... It may work 👍👍👍
@linamonsalve58953 жыл бұрын
Hello i have the same problem but when I disconnect one side, any side the whole screen turns dark, do you know what to do in that case?
@mysticroads3 жыл бұрын
Hi Lina , In your case I feel that the T CON CONTROL BOARD will be faulty , from TCON board there will be 3 connectors one input and 2 output for the right half and left half of the screen , try disconnecting one side either left or right...and check which side you get image and which side is becoming blackout
@linamonsalve58953 жыл бұрын
@@mysticroads Hello, thanks for your reply, i tried that, however if I disconnect either side of the TCON board, the screen goes dark again.
@mrmustafa29663 жыл бұрын
Bro but one thing i want to know Actually what signals are u have block for this
@mysticroads3 жыл бұрын
It's LVDS signals
@sudhakartuty573 жыл бұрын
I have got like this problem in my sony LCD tv.. I saw many videos for how to resolve it.. Many doing cutting removal of ckv signal and something.. You are doing different way.. Is tat different problem??
@sudhakartuty573 жыл бұрын
@Basil Ke ok sir, thanks for ur reply. And one more question is whether i can go for repair or not because service persons not giving assurance for long run of tv after getting resolved by cutting method.. If the problem is resolved what will be the life for it? Can u tell the period?
@sudhakartuty573 жыл бұрын
@Basil Ke Thank you so much sir.
@nishashettymk2 жыл бұрын
Sir will our tv get double image if we are using fire stick for 2 to 3 yrs
@mysticroads2 жыл бұрын
i dont think it will be an issue
@arunkrishna33119 ай бұрын
Hi my tcon control board has single connection only.. tv is videocon led
@na-ki3ym Жыл бұрын
Legend
@arhamsadidhossain84202 жыл бұрын
Can I just replace the connectors?
@mysticroads2 жыл бұрын
there is no problem in the connectors , the problem is with the noise/error signals emerging from the TCON board
@pradeepmahendrasemage40432 жыл бұрын
Witch board having a issue?
@mysticroads2 жыл бұрын
T CON Board
@ryanraybenalayo95362 жыл бұрын
Same model.maY problem is vertical line. And ill try you methods not work
@mysticroads2 жыл бұрын
U may check to replace the T CON Boardd
@raghulgul052 жыл бұрын
Bro same problem in my Videocon led tv bro what to do please help me bro
@mysticroads2 жыл бұрын
open the rear cover of ur tv and follow the process ans explained in my video.
@srisaru19122 жыл бұрын
I have Sony TV can i do the same with Sony, will it work? How many how to find the correct position to mask....
@mysticroads Жыл бұрын
Just past the mask on the position from left
@kevinjose60833 жыл бұрын
Sir ,one side line disconnected..then tv showing one side black color and othe side same flickering image..what to do sir
@mysticroads3 жыл бұрын
provide tape on the other connector as i have shown in the video, as the problem is with that connector only
@kevinjose60833 жыл бұрын
@@mysticroads thanks sir......
@jomstechvlog2 жыл бұрын
How many pin to block.
@mysticroads2 жыл бұрын
3-4 pins
@prasannak93483 жыл бұрын
Super
@mysticroads3 жыл бұрын
Thank you bro
@mysticroads2 жыл бұрын
Thank you soo much for your comments ... please subscribe to my channel
@myblog22593 жыл бұрын
Hi can you tell what was actual fault.
@mysticroads3 жыл бұрын
doubling Image and jumping image
@swami12363 жыл бұрын
bro, channel running in our Tamil channel but y don't speak in our Tamil language to guide its easy to understand for everybody
@mysticroads3 жыл бұрын
Will do bro...thank you for your kind suggestion... நன்றி நண்பா ❤️🙏👍
@mostafamamdouh48382 жыл бұрын
Now my left side either complete black or complete white what shall i do?
@mysticroads2 жыл бұрын
the T con board has to be replaces , i think it has turned defective
@JesusChrist-sx1lf8 ай бұрын
kapton tape lasts longer than regular tape.
@samuelch27012 жыл бұрын
How much money can give to that work in repair shop
@mysticroads2 жыл бұрын
They may charge minimum of 75$ ~ 125$ , depending upon the defect, if they intend to replace the Tcon Board then the board cost will add up another 50/70$ i presume.
@Supeerr3 жыл бұрын
Hi, I'm a ten year old boy and I faced this problem today and I get confused at 2:42 and my mom would probably not let me do this and we don't have screw drivers and she probably would put do this either so I don't know what to do but my bb brother kept throwing his toys at the screen so I think thats one of the problems Idk what to do but if you could try to explain it to me I would be very happy and try:)
@TJ200262 жыл бұрын
what is its cost to repair
@mysticroads2 жыл бұрын
Zero cost , just a small piece of cello tape
@xuzm2 жыл бұрын
My screen becomes black when i remove 1 cable..
@gangadhar.k73922 жыл бұрын
Hi Anna, i have tried this i have unlatch the right side but total screen showing black , and tried another side but same. Then how would I know which side i have to put tape?
@mysticroads2 жыл бұрын
hi bro the unlatched right portion will be black only as the video signal is removed , u check the other side if any jumping or doubling issue , then latch the right side and unlatch the left side and check again , by this way u can check which side the err or is.
@gangadhar.k73922 жыл бұрын
Understood. But if I unlatch any of side complete screen getting black.. But anyways I guessed the side and place the tape. It's working now.. 100% Thank you very much.