A lot of viewers have been real thankful for our DIY videos and have ask if there was a way to buy us a Beer. KZfaq now has a ‘THANKS’ button under every video, Just click the button. 😀 It’s not required or expected, but it is appreciated. THANK YOU!

Just did this and it 100% worked I just put tape on the right one and good as new. You saved me hundreds of dollars I hope your pillows are cool on both sides forever

Thank you so much. Saved a lot of time and money. I wasn't seeing any picture when I removed either of the connectors but still proceeded to put the tape on the right connector leaving the first 10 pins and it worked like magic!

Thank you so much for this video. Wasn't totally sure what I was doing but my dad and I tried our best to follow your instructions and we fixed it! Thank you so much!

Thank you soooooo much!!! I just fixed my 49” LG now with your instructions!! You deserve a million likes!! 🙌🏻

Thank you so much! We had a crazy week of our fridge, washer and 2 cars dying on us. We replaced the fridge and washer and got the cars fixed. Of course the tv would start acting up on us the second we had everything all set. Thanks to you and your great user friendly directions we didn’t have to add a tv to the list of things to buy or have someone fix. Thank you so very much! It worked!

I have no idea how much money I have saved because of your video. Every service I called said it's not worth fixing this this and I will be better off with buying a new TV. Well little do they know, there is a godlike guy on youtube who used a small piece of tape and fixed the whole issue within MINUTES. Thank you 🙏 you are amazing!

Thank you! Thank you! Thank you! You're a life saver! On the Samsung communities they have you reset the image, reset the entire TV disconnect any periphicals (like that makes a difference if you have this issue on the on screen menus as well :( ) In addition to this my experience: -Pull one flat cable: no image at all -Pull the other flat cable (putting the first one back of course): no image at all So, I thought I had really broken the TV now! -Push both cables back: image was back and after a few minutes the issue re occurred. -Just taped from about the 10th pin on one of the cables (50% chance I have right one ;) ): issue seemed to be gone, but so was about 10 cm of the image on the left side :( -Cut off a piece of tape of about 4mm in width. Taped that on the place where I had just put the wider piece of tape: yes! The issue was gone and I had the complete image! So as it turns out, one can easily fix this with a piece of tape!

Well, I can't figured which connector is problematic because with one unplugged I didn't have picture at all. I used tape hack for right connector and it's fixed! Thank you:)

Thanks you.. i gave my TV to three service guys and they all said that i need new TV or repair will be expansive. Today i almost wanted buy new tv for 600€ but i tried your advice and i hope it will last. You saved much money for people out there.

Came here to say: this worked!! Had to place the tape a 2nd time but it’s working now. I got this tv refurbished from Samsung after my first one started having issues, and a month in it started with this. Hopefully this lasts longer than the job they did! Thanks so much

Thanks bro it was a smooth fix for me. 🙃 The tricky part is counting the 11th to 20th on the ckv cable other than that, everything is easy.

This is my first ever youtube comment and it is worth it! You have saved me a large amount of money replacing my TV 👍🏽👍🏽 I did had to trial and error a couple of times between the sides as when I took the ribbon out to find which side was causing it I got a black screen 😆

It worked. It took me a few tries to get the right amount of pins covered. After that there was a black line of the side of the screen, that was fixed by cutting the tape in half. Thank you so much for your video!

I really thought that this was somekind of bull$hit. I was like it cant be real. Well turns out this works. Counted 10pins from the side and put some packaging tape on right side ribbon. And now my tv no longer flickers. Cheers bro, you literally saved me.

A repair Shop affiliated with Samsung told me that the pannel was not good anymore and to replace it it would cost me 600$ ... i tried this and it worked , thank you so much

Best repair video on youtube. Fix my tv in 20 min. Thanks you so much.

Took me a bit of time to get the back of and to find the pins but can confirm. This 100% works. Great video. Thanks man.

Thank you for your video. I fixed my tv using this method and i confirm it works! I had to place my tape on the left ribbon connector, as that was where my problem was. I used a piece of tape about 1cm wide, on the 11th pin (leaving 10 pins unblocked from the left side)

works for me.. from 11th pin to 20th..but you have to try correct side of flexi connector.. First not worked, but i put tape on other side of connector and it worked.. great.thanks

Amazing! I don’t know how you figured out this work around! Worked on my 55” Samsung Smart TV!!! I had my doubts, thank you! You must work for Samsung to have come up with this fix!

For me, it took some time to figure out the 10th pin and after that, the trick worked for me as well. Thanks

Thank you so so much. I calculated precisely from 11th to 20th pin and put the tape over. All the problems are fixed. I really can't thank you enough.

Can’t thank you enough man I just saved around 150$ following your method 👏🏽

I never write comments on KZfaq videos but this one deserves it. You saved me so much time, money, and headaches. For those reading, it did take a good amount of tries to figure out which strip needed the tape but when you get the clear picture, it’s a great feeling. Thank you SOOO much for this video and your assistance! Is there a way I can support you or your business to show my gratitude?

Worked perfectly! Thank you so much for making this video

Worked for me too! Had to cut the tape in half so it didn’t cover as many pins, thank you very much that’s saved us a lot of money 🙏

As crazy as this repair looks, it really does work. Thank you

Our TV is currently doing this, we are trying this fix, will update with results. Nothing is coming on when we disconnect either connecter, but I’ve seen other comments saying it works anyways, so I figure what do we have to lose? Edit: it works!!! Thank you!!! Saved us so much money!

Worked for me! much appreciated! Your video has really helped fix my tv it wasn’t bs!

Instructions unclear I am now wrapped in tape… just kidding thanks a million man! Samsung had quoted me $450 to swap the LCD panel. I owe you big time!

I tried it and worked like a charm!! I couldn't view the TV to check which ribbon cable it was so I placed the tape about where you put it, plugged TV in got it right on the 1st try Thank you P.S. If it goes out again I think I'll just replace the Ribbon Cable

100% works. 👏👏Thanks a lot for the video buddy. My tv is samsung UE50RU7470U. I had same problem but finding which connector was causing issue was pain. If I disconnect one connector my screen will go blank not like shown in the video. So I made a lucky guess and tapped 10 pin after on right strip connector and it worked. 👏👏

Awesome! This solution works perfectly. 😂😂 I must say it was a haslet trying to open my TV. But it paid off. I would have spent so much money for a repair service. Thanks man

Tbarkellah 3lik...... I fixed my problem using your hint! it works perfect thanks a lot!

Thank you so much, i had a problem with my tv, in this case, the left side of the panel was grey-ish and the right side was normal. I had another T-con board with different flexible cables, so i just changed the right side cable and it worked.

Brilliant video, however it would have been good to find out how to remove the back plate of the TV. I had to watch another video to find this out. TV working perfectly again, many thanks to you.

This worked perfectly! Thank you so much!

It works!!!!!! Yehey. Wow. It's like magic in our tv Thank you. ❤❤❤❤

Very helpful and did the trick thanks. Would be interesting to know why it works. For anyone else attempting this repair, I found it much easier to guess 10 pins in (because they are tiny), put a thin strip of tape where I thought it should be (cut 2/3rds off the width of standard tape) and then took a photo on my phone and zoomed in to count them, adjusting accordingly.

TYSM THIS WORKED AFTER MULTIPLE TRIES (FIRST TIMES LEFT HALF FLICKERING)

Thanks Sir, i tried it and it worked wonders...big thanks to you and wishing you the best in your future endeavors

THANK YOU!!!! WORKED GREAT AFTER I TAPED IT! SAVED ME HUNDREDS OF DOLLARS

Thankyou! This helped me. When i tried to check which one was the issue i couldnt find it. As i removed one side the screen turned completely black. So i assumed as you did and chose the right one. And left 10 pins from the right and on the 11 i put the tape. Tape was 1 cm wide. After that screen works perfectly. Thanks

Worked for me - took several attempts to get the right pins covered but definitely worked - THANK YOU

I just stumbled upon your video and fixed my Samsung The Frame 2020, 55inch. It had similar issues and at first I only saw one ribbon so I was confused. After looking further I saw on the bottom two small ribbons that were connected with the big one. So these were indeed for the left and right side of the screen. However blocking pin 11-20 with tape didn't solve it entirely, as I had grey lines on top and throughout the screen and some other green lines. It was pretty watchable but I tried some more pins and eventually blocking pin 12-20 solved it entirely for me :-) Thanks so much!

Thank you so much. I was about to bin my Samsung and your fix worked with some trial and error. I can now watch the football later today.

Thank for the video it helped me out.. all i had to do was flip the scripts now my tv is working fine....i really appreciate you

Seemed wayyy to good to be true. I cannot believe this actually worked! I cannot thank you enough! Worked on my 2018 LCD

Tried this fix on a Hisense TV and it worked a treat . Thanks for the tip. Amazing .

Thank tou so much my friend you fix my tv,thanks for your help,keep up the good work and the help you provide...!!!!

This helped me alot tnx alot you saved me you just a new subscriber (hisense vidaa smart tv)55inches

This was a massive help. Thanks a lot

Thank you bro, I fix my father's TV in less than 30min, cheers

Amazing, thanks for this. Can't believe it worked! Would like to know what exactly covering the pins has done - what has it disabled?

Wow! Thank you it worked. Maybe i need to cover more pins with tape... flickering has completely stopped, but i have a 1cm wide vertical black line on the left of the screen

Thank you so much it’s wonderful and it’s working.⭐️⭐️⭐️⭐️⭐️ One question?! ⚠️🛑🛑 With that method i will miss some features or quality of the picture ?

Unreal - honestly thanks to this legend for posting this video. Also, my fix was to cover the left ribbon - 10pins from the left. Took me 5 go’s but it works!!!

Wasnt expecting this, but it works😂❤

Solved! Thank you , it worked. I have seen many similar clips, but only in this one is a Samsung model like mine. The problem for me was on the left plug. I succeeded the first time with a wide size but I wanted to reduce it to 3 pins. The problem reappeared but not as obvious as the first time. I came back with the wide size and it works. What changes did I make to remove these pins? What differences should I notice on the display?

Disconnecting either side left me with no picture at all, but I just applied the tape on the right side and it worked. My tape was a bit thicker than yours and maybe covered up too many pins and left me with small black strip on the right, no flickering though.. cutting the tape in half width ways seemed to do it, smaller than that left me with horizontal lines.. anyway thanks for the solution dude

Thanks youuuuuuuuuuuuuuuuuuuu. This worked for us!!!!!!

worked like a charm! thankful for this video! you saved my TV. on to buy new sneakers instead 😂

Thanks a lot Hero, greetings from Poland

Thanks for lowering my bp 😉, it worked

Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I ​​have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.

Thanks ! Works for me

It worked ! Thanks a ton

Wow..thanks a lot mate works a treat

currently having this same issue. Tried common fixes but doesn't fix issue. Im gonna try your fix and hope it will work.

Removing either ribbon just made the whole screen blank. But I tried the sticky tape anyway and it worked! Here's a tip, if you can't read the pins coz they're too small, take a close up pic on your phone then zoom in your saved photo to count how many you've taped over

thank you so much. it work again! 😄

Thank you! I just fixed a Samsung 42”

Stupidly easy fix for an even stupider issue, this worked for me too! Cut some tape in half and covered ten pins from the right on the right strap and it worked!

BEST HACK VIDEO EVER, THANK YOU! 😀👍

Very nice video.

Samsung UE50NU7400 worked for me! My screen was all black when i unplugged a cable, covered the same cable from pin 11 to 24 inclusive. Hope the problem does not start again, THANKS A LOT! Grazie 1000 sei grande!

I'm not sure why but that actually worked, my tv was flickering, I put some tape on the damaged ribbon and that's it... Thanks!!

Thx it worked 🙂

❤️ good info

Easy fix!!! Thank you!!!!

Iam very thankful to your video

Just curious for info these pins 11-21 have definitely some function as per manufacturer...so by putting tape on these pins we block or isolate, signals/voltage, from these pins to mother board...??? And the jumping problem is resolved...??

Two words Sir......... Thank You

It worked THANK YOU

Amazing, its worked

Hello, I'm tempt to try that tutorial, but my symptom isn't a double line flickering like yours. I'm getting a snow dots rectangle flickering blink, like 5 cm on the right. Would covering the 'CKV' like also be the solution ?

Gracias maestro! Funciono perfecto, me ahorre mucha lana!

OMG, can't believe this worked on the 1st try and I winged it as well, thanks lol

Thank you for the video! It's fixed the issues however i can't seem to get the color to correctly work now. It's fades the color out now from left to right. Might be time for a new tv. Thank you though

Thankx bro I just fixed my shit , you help me save hella money gang

Have the same issue. When removing both ribbon cables the screen remained black. Tried covering the said pinouts as instructed in the video and comments but the flickering still persisted. Tried different combinations also. Is there anything else I could try?

Thanks it worked

Its magic!!

Mi philips works like new now. Thank you

This worked to solve the initial jumping display but drastically reduced the color output on the left side. I replaced the Tcon cables on both sides and the jumping issue returned so I put the taped cable back.

Thank you! I thought i had to replace my tv and now i dont have to 😀

Thanks!

Hello, I have a Samsung UE43NU7442U with the same issue, but it’s flickering a lot more than your TV does. Can this fix be used with my TV too? They are really similar to each other. And also, did you cover the 10th pin too or only the 11th?

Thanks master. But what was the reason of this problem such that putting a tap fixes it?