Рет қаралды 48,041
Buy replacement control arm bushings for your Polaris Ranger 800 Crew along with other parts and supplies here: bit.ly/Polaris-...
We’re replacing the control arm bushings in our Polaris UTV in this video from Partzilla.com. This Polaris Ranger 800 Crew needs a lot of work on the front end: wheel bearings, ball joints, and today, an A-arm bushing replacement.
John will show you how to disassemble the front suspension. We’ll remove the wheel and the brake caliper before digging down and removing the control arms on this Polaris Ranger. Because of the location of the front bolt on the bottom control arm, we’ll need to remove the bumper, and
John will guide you through how to remove the bumper on your Polaris Ranger Crew.
With the control arms removed, we’ll replace the A-arm bushings and replace the A-arms on the Ranger. Then, we’ll get the rest of the corner of this UTV put together again.
Read how to do this job step by step: www.partzilla....
Check out this Polaris Ranger 800 Crew wheel bearing replacement video to see more of the work we performed: • Polaris Ranger Crew 80...
See a Polaris Ranger Crew front suspension diagram to get a closer look at where we’re working:
www.partzilla....
See the front bumper diagram for a better understanding of how it’s attached: www.partzilla....
VIDEO HIGHLIGHTS:
Removing the wheel - 1:18
Removing the brake caliper - 1:50
Removing the hub - 2:30
Disconnecting steering arm - 4:20
Removing the shock - 6:30
Removing upper control arm - 6:50
Removing the bumper - 7:45
Removing the lower control arm - 9:00
Removing old bushings - 9:20
Installing new bushings - 10:15
Installing lower control arm - 11:20
Upper control arm replacement - 12:00
Half-shaft replacement - 13:00
Steering knuckle replacement - 13:30
Steering arm mount - 14:10
Installing hub - 14:30
Buy OEM Polaris Ranger 800 Crew parts here:
www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2011 Polaris Ranger 800 Crew, but you will have similar steps for your Polaris UTV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Polaris Ranger 800 Crew brake pad replacement:
• Polaris Ranger 800 Cre...
Polaris Ranger 800 Crew oil change:
• Polaris Ranger 800 Cre...