Polaris Sportsman starter bendix replacement

Рет қаралды 96,802

7 жыл бұрын

Replacing the starter bendix in a 2005 Polaris Sportsman 500 HO. The atv has approximately 4800 miles and the bendix was basically worn out.

Пікірлер: 37

@jcjobin 5 жыл бұрын

Awesome video man. My pull start all of a sudden seized on me, opened it up and the pull start assembly broke, in the meantime, I looked at the bendix and realized that the teeth were completely worn down! Sounded a lot like 0:20. Thanks again.

@minnesotakid1327 7 жыл бұрын

Excellent video, straight to the point. Thank you!

@reindeersafaricom 6 жыл бұрын

Thanks bro. Regards from Lapland

@edbrisket8800 2 ай бұрын

Good job chief😊

@MartineduardoRC 6 жыл бұрын

thanks for the vid, the flywheel in 700, you have too taken off for sure if you want take apart the bendix.

@RichardJones-us1xl 7 ай бұрын

Thanks man great video gotta do mine 👍

@noneckjoe948 3 жыл бұрын

Put a new starter in mine and still doesn’t start; must be the bendix .. your video was very helpful... thanks for sharing...

@badas95Z 2 жыл бұрын

Was it your bendix?

@samp5057 22 күн бұрын

Well? Was it?

@noneckjoe948 22 күн бұрын

@@samp5057 yes

@josephdestefano7377 3 жыл бұрын

THANKS FOR THE INFO !

@justinjohnson7236 6 жыл бұрын

My starter is bad. I’ve got the replacement and a new bendix I got with it. It looks like the starter comes out the other side. Would it be easier to install the starter from the other side with that cover and bendix our or does it need to be in place in order to put the new starter in? Just trying to save myself some work as other videos show the starter being a bit of a pain to get the bolts started and stuff

@peteranderson2575 3 жыл бұрын

Thanks for this video!!!

@marcidillabough3331 7 жыл бұрын

does the flywheel need to come off on a polaris 700 sportsman to remove the bendex?

@escudeiro14 5 жыл бұрын

Por favor, você sabe me informar os números de engrenagens do bendix do polaris sportman 500??

@jonhatfield5459 4 жыл бұрын

You got a part number on the bushins you replaced?

@itstheoz1 Жыл бұрын

i put a new bendix on mine and you still cant start it as soon as it fires starter revs up old and new drives do the same thing any idea's

@clintonblackwell8304 6 жыл бұрын

Hey man can u help me I have a new stater and bendix but the bandix is just spinning won't engage can u help me

@tazzharm 6 жыл бұрын

Hi was wondering i just checked mine as it's making a lot of noise , new one ordered do you put any agl or oil in the case to lube the gears?

@mlevi512 6 жыл бұрын

Tazzharm No I didn't. Mine was noisy before changing also and I found that the bushings that hold the bendix were worn causing the noise.

@hectorrojas9310 6 жыл бұрын

Me puede mandar el diagrama de todo lo que va en esa parte donde esta desarmando

@mlevi512 7 жыл бұрын

I can't say for sure on a 700...500's do not need to be taken off.

@tazzharm 6 жыл бұрын

Ok thanks I posted vids of the noise mine made Bushings will be changed later and see if it's better Check out my three vids and tell me if same or worse Thanks

@Devo1987 5 жыл бұрын

canthat bad bendix cause the pull start from not retracting ?

@mlevi512 5 жыл бұрын

No, the bendix is only related to the electric start. Check out your recoil assembly.

@Devo1987 5 жыл бұрын

@@mlevi512 I just changed it out with a new one everything moves freely I did have water get inside the cover I got to clean that

@ericmassey5423 4 жыл бұрын

Would have been nice if you showed us it started good after all of that.

@mlevi512 4 жыл бұрын

Well I guess you'll have to take my word, it started good.

@michaelkaylor6770 7 жыл бұрын

Probably not a 5/16, more like 8mm...

@mlevi512 7 жыл бұрын

Michael Kaylor how boring is your life that you feel the need to nitpick a video like this? Go away.

@acutt5512 5 жыл бұрын

5/16 and 8mm are interchangable, onle a few thousands difference

@acutt5512 5 жыл бұрын

@@mlevi512 thanks for this video, my wifes 450 is doing the same thing, thought i had to pull the whole starter and am glad i found this video! Should I put a dab of grease in the bushing holes?

@mlevi512 5 жыл бұрын

@@acutt5512 I did on mine. They had a slight amount of play and with just a touch of grease they felt better.

@acutt5512 5 жыл бұрын

@@mlevi512 thanks man, ordering one today, didnt see the caltrix though, got a link?