Such a waste of time and money working on a rusted out vehicle that has no value in the end

"It was not fixed" I love the black and white post commentary parts

"you always remember the painful ones" takes on a whole new meaning when your car tries to give you hantavirus!

I’m 51 & never had children, I’ve never regretted my decision. But I have to say if I was guaranteed a son like JD I would’ve had a kid in a second ! He’s a great young man & raised by a REAL father ! It’s so awesome to watch you both work together !! Another great video ! Get well soon ! 😊

When Jd got the starter in the little “fuck yea” killed me 😂

at this point in history, an ignition toggle and a push switch would be considered a security device

That transmission nearly stressed him to death. You may have won the battle, Scout. The war ain’t won. Looking forward to a satisfying resolution for you Dalton. Heal fast brother.

The hospital bill fund!!! I will buy more pbg hats

The alluding to future problems with "it was not okay" always gets me.

Saw the news of you being in the hospital on Insta. I’m sorry this thing kicked your ass and am glad you’re doing better. Bought some merch to help out a little. Yours and Kevin Brown’s merch is the only merch I buy. ❤ Peace to you brother. Get well soon.

Turns out, the scout isn't what you drive during the zombie apocalypse, its what causes the outbreak! I hope you get better soon! Dont go turning into patient zero on us!

Dalton, thank you for bringing back some good memories. My first revival was a ‘77 Scout II, 304 with a 727 auto. Outside without a top for 22 years, black widows in the transmission tunnel, actively failing head gaskets, a couple wiped cam lobes, and the body was held to the frame by whoever was sitting in it. Ran like a dream, still miss it to this day.

This is fine, I didn't want to go to bed anyway.

Brings back memories my dad has a 69 scout with a 345 sitting in barn waiting for some love. Dad started working on it before he passed away. I helped him get it running and drive it out of fence row to where it rest now.

Dude the drivin around and trying to unstick the clutch had me rolling 😂😂😂😂

34:36 😂😂 dalton slowly rolling across his yard while stomping on the clutch was great😂😂😂

JD is already an impressive mechanic, I look forward to seeing him advance far into the future. Well done guys

Hope you're doing better now Dalton!!

That's a lot of work for a crappy Scout but I love the never quit attitude. I hope you feel better and it's not hantavirus

Love my BRUNT boots Dalton, had them over 2 years no issues. Worked at FedEx as a delivery driver in the woods and they can take the abuse. Great content as always, get well soon!!!

These old scouts rust so bad, especially in new england. Any time you see one in good shape it's a miracle.

JD is a spitting image of my son when Scott was that young. It is the reason I started watching the channel, back when you were building the Holy Goat. It has been nice to see your channel grow and become what it has. Way to go, JD. Sidenote. My Dad fell in the chicken coop, and before he could get up he had contracted listeria poisoning. Almost 7 years later and he has been in a wheel chair ever since. Be careful what you lay in. Glad to see your doing better.

Hell yeah. Glad you're doing a scout. Had a 56 as a truck puller growing up. Just got my dad's ole 76 in garage and working on it to make my daily. Hope JD enjoys that rig

Working on cool cars with limited electronics and vacuums is always something I wanted to learn and thanks to Dalton, JD and Jessie I can now enjoy. Thanks guys for doing all the sweat, grit and bleeding. Never seen a turnbuckle in a clutch assembly....lol but sometimes we have to kill what we love...

I love your random dramatic paused video commentary on things, they get me every time 😂

Hope ya feel better soon. We had a 69 Scout for a "Farm Use" vehicle when I was growing up. That little truck could go anywhere, but I swear the thing had Gremlins in it, whenever something had to be fixed on it the thing would fight you all the way.

Hope you feel better soon buddy hate to see you sick and in the hospital much love bro 🙏

The best way to break a frozen clutch is to hold the clutch pedal down and use the throttle and brakes,(if you have any) to speed up and put pressure on the plate to free it

Wow, we are brothers from different mothers. I am all about the Apocalypse. I loved the 80's apocalypse movies like Mad Max, Steel Dawn, Escape from NY, Bronx Warriors, City Limits and many many more. Love the channel.

I was looking, and it seems the frame is pretty good. I think you have a ton of potential in that Scout. I'm actually jealous. Out of the 4 I've owned, Only one had a decent frame. Hope you get to feelin better, Dalton!

My awesome Uncle had a Scout, and he would get so drunk that I had to drive us everywhere😂 I was like 12 yrs old and would drive him to the liquor store. Drove a tractor my whole life, so the Scout felt similar😅

1:33 "A little trick I learned in the Car Thief Retirement Home. . ." - Nicholas Cage as Randall Raines in Gone in 60 Seconds.

Two things: 1) JD is a great “Yes Man” for the old man. 2) Scouts are awesome! That half-a-392 4 cylinder is a torque machine. I had a ‘77 with the 4 cyl and I could just take my foot off the clutch in 1st or 2nd and it’d go without using any throttle, almost like a diesel.

Glad you have Jess by your side. And JD is great too. Get well man. Get some rest and tackle that piece of crap later, we'll wait.

I love what you are doing with JD, so many parents don't guide their kids into an interest that doesn't include a gaming console or a computer of some kid. 🤘👍

Get well soon good Sir! Hope you have a quick recovery. You will get this thing going!

There are no scouts left in my part of the world, other than (supposedly) restored ones that are priced sky-high. Keep up the good work and get well soon; I appreciate how real you keep things.

Wishing you a quick and smooth recovery man! Take all the time you need!

It was a boring evening here on KZfaq , thank God for a new pole barn video made my day !!

Hang in there brother. Taking one for the team is part of the business. Pretty impressed with JD and the wife too. It is the family that keeps and maintains the edge brother. Remember that👊👊👊

These international trucks are amazing. Have to say, JD has 100x the personality and gitterdun of any other KZfaq offspring. What a great kid! Keep it up and keep it real!

I'm expecting one of these days that Dalton will utter the words "because I don't already hate my self enough" as to why he brought yet another junkyard worthy find.

Late night PBG!

I'm really glad you're trying to revitalize this old rust bucket. It's junk but it's got personality and a will to live. Keep at it. You'll get it going!!

I like your choice in sponsors. Dalton! Though I do not own a pair of these broken-in and waterproof boots, I will seriously consider these as the foremost manufacture of working-man boots. JD is a quick learmer, and Jess is a great addition!!

These were unstoppable winter beasts in Wisconsin but I swear you could HEAR them rust… Japanese cars were known for rapid rusting but I think these (and Travelalls) actually rusted faster than anything else…

Straight to it, no messing around. It is sad to see them looking like that, but sadly they all went the way of the rot. Oooh, foreshadowing. Building tension and excitement. Awesome. JD is battling away with no complaints. He is an amazing boy. The bedsides look bowed it is so rotten, lol. Were I to see that rat's nest of wiring and bodgery, I would slowly back away, turn my back on it, and forget I even saw it. Tackling something that bad is one of my nitemare scenarios. Kudos to you for trying to decipher it all and getting it to work. You are an electrical mastermind, even if you do not say so yourself. You have probably forgotten more than some people know. They're nice-looking boots. I wonder if they are available here. Because you are allowing yourself to showcase a sponsor, I know for a fact that they will be decent boots. I have had good luck in the past by pulling starting cars with stuck clutches with them in 4th. It has no choice but to slip then, and if it is freeable, it will come free. This truck is proving to be very educational for JD. Wiring, clutch, brakes. He seems to soak up knowledge like a sponge. What a pity that the clutch you got was not the right one for the job. The chances of it fitting anything else that you may need bits for in future are slim to none I suppose. Jerry rigging the clutch like that is what this cahhel is all about. You figuring out the impossible, and finding solutions that work. On a side note, I see you have another 6,000 subscribers since the last video. That is brilliant. I hope they all join the low buck club, or even better, the save the shop club. You're definitely going places now Dalton, and I am so excited to see what the future has in store for you and the team. Seeing you getting more and more tired as you were getting the gearbox put back together was hilarious. You got ill from the truck? You have worked on much much worse stuff, with way more rat and other animals remenets and been ok. What about Jess and JD? Did they get ill too? I hope you get better soon Dalton. This is over a week or so after you filned (July 11, and the video dropped yesterday) so all being well you are back to being better now. Thank you for a great episode. Very enjoyable as always. Neil :-)

Dude you made me tear up and miss my ‘70 IH scout 800B. I had the 345 and it was tweaked w, holly 850 double pumper , a little cam work, and accel ignition. I used to run in the 2 ten gallon side tanks on the purple airport gas about 5 gallons, 2 gallons of some solvent from a printing company that was alcohol and probably xylene or lacquer thinner and 2 gallons of water so that I didn’t burn the valves and boost the compression. It had ether hard pipe to the carb to cold start it and in winter it left contrails going down the road. I used to race it at 4wd rallies in Pa. It was slower than the jeeps but it was tougher. I broke a few uni’s on the front shaft and the shaft 2 times. Tires were Continental bias ply. Screwed to the rims. The whole back bed was replaced with diamond plate. Rust rules!

This would make a great little vehicle. 6 inch lift . 35 inch tall tires .new shocks . A soft top .your son would smile for days !

Hopefully you are doing better and they figured out what was wrong. Praying for your full recovery. Thanks for another awesome video.

Hey Dalton, hope you have a speedy recovery! Hope all is better soon

Hope you recovery quickly i saw the fb post. That old Scout kick your butt. Nice that you and JD have same passion in vehicles

I threw several of those clutch alignment things out years ago. They appeared to be made out of wood! School buses used the 345 v-8 with the same engine and rear axle as the scout! Just that they were 2 wheel drive onlY. Thought I would never see another international scout or school bus again, time rusted them all out! And they went out of business. All the school buses went to automatics transmissions and Diesel engines. In the winter it is nice to have a diesel, actual heat is a godsend! Hear that they make them with air conditioning now! Maintain one diesel with a manual transmission now. Was in a Superman movie! Shortie and repainted. Has a heart of gold. Will be sad when she retires! Love to put a long work bench in it and go camping in it! 10-12 mpg, empty, loaded or loaded with trailer!

Gawd damn! I almost fell backwards in my chair when that throw out bearing popped out🤣🤣

You must not love JD. Every time you find a piece of junk. You say “ let’s fix it up for JD” 😂😂😂. He will get tetanus just looking at that rust bucket. I do love how you two bond over these vehicles ❤️

I love every single one of your videos. But I’m more impressed with JD’s progress. It’s been so awesome to watch his growth! I’m already picturing his high school automotive teacher just taking a seat in the corner while JD straight up takes them to class!

One of our farm hands had an International pickup. It was late 60’s/early 70’s. I would love to have a Scout II.

When you 'introduce the splined shaft into the clutch assembly' gently try and rotate it. Everything has to be concentric (hence the alignment tool) but the splines have to be 'bob on' as well. It will fight and fight before suddenly slipping together with almost no effort.

I know it sucks to have to pull a transmission, but I sure learned a lot from it

Really love your channel,very old school,no lifter,just work with a jack,no fancy garage,that shows a guy knows what he is doing🙏🙏⭐️⭐️🇬🇧🇬🇧🍺🍺

love yall so much. as a recklessly living puppet myself, it behooves me to say to you mr. dalton lets try to avoid pesticides, mouse turds, and semi trucks smashing us please...

I've always wanted an International Scout. Such tough little trucks.

Sometimes you kick the car/trucks butt, sometimes it kicks yours. You'll get it to work I have no doubts whatsoever. Now you get some rest and heal up, ok? Ok!

Looking forward to part 2 of this pos.. get well soon Sir!

Heading to merch now. Get well soon. Should give JD a lesson in how to make sure a care will never hurt anyone ever again when you're feeling better. The plume will be seen for miles.

I really like the idea of just filling it full of tannerite 😂

Hope you get feeling better soon. What do you guys call the dog? I'm a little deaf and I keep hearing things that could demonetize. Lol, my ears ring all the time.

Gotta say I really enjoy your channel! First saw you on junkyard digs and have gone back and started watching from your first video. No fancy shop or fancy tools. Just a normal guy like most of us. Love that about your videos! Keep them coming!

So many mechanics don't want to play with a manual transmission because, as you can see, even replacing the clutch is hard work. I wish You good health and strength for further renovations.

PBG, VGG, JYD, Mortske, Puddin, and Dylan McCool are my pillars of the KZfaq car stuff. There's a smattering of others, but those are my mains.

"Piece of garbage that this International is. No wonder they quit making these things." After hearing how amazing and wonderful these trucks are for literal decades, hearing this made me laugh so fucking hard. Thank you for this.

Hope you’re feeling better man! Something you might get a kick out of is whenever I’m with my buddies and watch your channel we play this drinking game where every time you say “cellunder” we take a shot, and boy have we had some rough episodes 😂😂 keep up the good work sir!

Damn... Wasn't expecting the end of the video to be like that. I've had some health issues the last five years or so, and have been hospitalized six different times. The only good thing about hospitals is the pain meds, and the young nurses with nice ta-ta's reaching across you to get something that you know they didn't need. Doesn't take much to make me happy... Hope you get better soon. Being sick truly sucks.

The truck I drive all the time costed me 400$ to BUY not to fix haha

Nothing better that a new PBG when I wake up and scan KZfaq.

Try putting the bell housing on transmission, then put pressure plate and clutch disk on. Slide transmission in, tighten pressure plate to flywheel through inspection hole. I've had to do it this way on big rigs a few times makes for less stuff to line up.

It’s sad that the scout is so far gone. It’s nice that you are giving it a little bit of love.

The fly wheel inspection cover lets you turn the engine to align it and allow you to marry the transmission back to the motor after you change the clutch.

One minor observation. At 35:50, when she allowed you to drive out of the shot without following you, and your edit where the next shot is showing driving up to the garage... People don't realize that this simple transition is what makes really engaging video watching. AND the fact that she did it without being cued to do so...camera work is an art and she seems to have some natural instincts that just don't come natural to 99% of people out there. Like I said, just a minor observation. Also, give her the camera more often!

I would love to see a video where you just go around and talk about all the random stuff on the walls of your garage there’s gotta be so many good stories

When you were trying to get it in gear in the yard...your face has the look of raw determination Dalton!!!!

That was the best video you have done in my opinion.Thats how I rembered my dad working on his junk. Cussing and fuss and fighting working on something.Sorry you got sick hope your better but your buddy the pup was funning his tail was just going, then the sweet shot of him loving on you. Such sweet pup.

Poor you. We came home from Europe a week ago -- Diana sick as a dog -- then Bob got it four days ago -- and we are both still hacking the house up. He got a fever, I didn't. We think it's bronchitis. Many meds later, I am almost well... Bob needs a few more days. Be well Dalton. That vehicle is pretty darn sketchy if you ask me.....

This is why this channel is so great, you take the worst vehicle's and make them move under there own power

Heal up buddy. Take your time we will be here when you're feeling better.

I love how as the vids go on, you can see JD getting more involved and more confidant. You should do a Collab with SleeperDude. Like a build off or something. You vs Josh And JD vs Ralphie. that would be epic

That little Scout runs good, sorry to see the clutch was fighting so bad, and I hope you feel better soon.

Just wanted to let you know man that I started a KZfaq channel a few months ago to document our preparation for power tour. You and your family inspired me and my family. Keep up the good work!!!!

It was such a pleasure meeting you at the gas station on your way to the Pontiac nationals. Thank you so much for the sticker!!!

As you were riding the Scout standing up, it made me think of Napoleon as he approached his Waterloo a.k.a. Scout Transmission. Just another great episode with laughter from Jess, expert mechanizing by JD and your relentless spirit.

This is cool that your doing this for your boy!! He deserves it. I wish i had a father growing up. I had nothing. In my book your all right with me. Thanks for sharing and always caring my friend!!!

I absolutely love the father and son getting it done together, your raising a great young man

That’s a really neat little truck, looks like it would make a great bush buggy once it’s back together. This is one of the first videos in a while Where you haven’t used self tappers on the car you’re working on 😜. Feel better soon and I look forward to seeing part two on this little truck.

Thanks for all that you do for us Dalton, been ages since I seen an International Scout and this brought back some good memories

What a find! A friend’s dad bought a Terra new in 1977 and had it for years. Plowed with it so yes it rusted away. He said it came with the 304 but at some point he put in a 345. When we were about 17 years old or so in 1993, we went and worked on the old thing. Replaced the calipers, rusty brake lines. Drive it around the lot in the snow. His dad kept it as a shop truck for a couple more years but eventually there was nothing left of the body. I think the half cab roof comes off on them.

Get well soon mate. Love the videos . This has given me some enthusiasm to get back into my 1962 landrover. Love your style. Cheers from New Zealand

I had a ‘75 Scout with a 245 v8. Great truck but the windshield channel rotted out and I was young ,broke and without a welder to make repairs. Traded for a 1972 c10. Great move!

Love the Brunt sponsorship! They make great boots!

hope you're feeling better, Dalton. this may be the rustiest turd yet, but clean international anything is ridiculously expensive

Another will it run video yes it will if it has an engine and you have Deep Pockets and time. I did a starter on an international prostar and THAT SUCKED😂dude paid too much for that rustbox