Polish Stainless Steel like a PRO.

Рет қаралды 41,354

3 жыл бұрын

Peter from Almost Chrome metal polishing came over to help get this visor dialed in for the customer, so we decided we would make a video to show you how to polish Stainless Steel like a real pro. Also follow Peter on Instagram: @almostchrome
Want to buy Time 2 Shine products? Link below use promo code - AC5
www.goshineon.com
Don't forget we have our truck show coming up on June 18-19, 2021
www.SemiCasualTruckShow.com
Get a hold of us: 844-569-7896 or SemiCasualShow@gmail.com
Check out our other companies
www.FitzgeraldPeterbilt.com
www.FitzgeraldUSA.com

Пікірлер: 38

@EvanStegerMetalPolishing 3 жыл бұрын

Looks awesome. Glad to see our products getting used in your shop. Truly appreciate you guys. Thanks for the plug and glad to see you liking the products.

@CanadianSouthpaw02 3 жыл бұрын

Your products are amazing buddy 👍

@EvanStegerMetalPolishing 3 жыл бұрын

@@CanadianSouthpaw02 Truly appreciate that.

@benwilkinson8636 3 жыл бұрын

I didn't think this video would be very interesting but it was actually really good.

@SEMICasualShow 3 жыл бұрын

Thanks!

@ianarchie3376 3 жыл бұрын

Was starting to get withdrawals have been looking forward to your videos. Great video

@ATF1985 3 жыл бұрын

The boys r back , love the doors , I’m glad u listen to me on the glass doors 😂. Looks great guys 👍

@sammapes1216 3 жыл бұрын

Good job on polishing. Came out very nice. Shop is looking awesome 👌😎

@glennrobichaux7490 3 жыл бұрын

Evan also has a great KZfaq channel with videos teaching his teqhniques

@jerryburdick8051 3 жыл бұрын

I love watching Peter work his magic. That said - that visor vendor should be ashamed. How did that piece leave their shop?

@tracymankey9314 3 жыл бұрын

Perter you are bad ass love watching your videos

@jesserasso1042 3 жыл бұрын

Shoot I wish I could hit up the truck show

@samstone4377 Жыл бұрын

Great video guys. Learned a lot. I'm newly experimenting with polishing mild steel to a mirror finish for plasma cut metal art using 180-3000 grits and then a fine wool 4" pad with compound/metal polish. I've tried dry and wet sanding and even coconut oil as a lubricant and high and low pressure on the sander. I can get the mirror finish but have those persistent pesky swirl marks using a short throw DA sander which seem to be deeper than the compound will handle. Any tips are appreciated.

@zimmhollowfarm8414 3 жыл бұрын

It's got to have a shiney hiney for me

@Ashworth-Media 3 жыл бұрын

Very good how-to, polishing is a very dirty process and you will get dirty doing it, you should use proper powertools used for polishing as they generally run slower than those for cutting or grinding, for best results only polish in one direction, if not you risk putting more scratch's into the work piece, it is a labour intensive process and for best results don't rush it, take your time.

@DeaDEye.21 Жыл бұрын

Awesome 😎 #ShineOn & #RollOn

@keithfurlow5024 3 жыл бұрын

Great job on polished visor, but I’m curious about that black and green Pete in the shop?

@Tafitzy 3 жыл бұрын

Stay tuned 😎

@jerrykinnin7941 2 жыл бұрын

Boss got me a new truck lots of Polished Aluminum. But it's a steel mill dump truck. What gets quick lime off. It sets up like concrete.

@iowaunemployment Ай бұрын

Little long but an excellent video. 5 starts to both of you.

@rha4374 6 ай бұрын

Yeah, you've got everything in good ol' USA, we don't have a Fekin thing in Scotland

@CountryBoyChronicle Жыл бұрын

what's the square footage of that shop? it looks sweet!

@11YeeP11 Жыл бұрын

When he talks about what direction to polish in to hide the scratches based on the direction you will look at it from, I believe he is referring to the direction his buffing wheel is turning. I went back twice and watched when he changed to the white wheel and he is moving the whole buffer "laterally" on the piece, but the wheel is turning from back to front. Then he goes to the chrome polish and states that you go in the direction you buffed it, and he moves the pad from back to front. Is this a correct assumption?

@thruthaseen.9892 2 жыл бұрын

So with the blue buff and black block after that always use the white buff and the white black as like a polisher?

@jesserasso1042 3 жыл бұрын

Gregg A is on his way

@anonymous-fg9fn 2 жыл бұрын

What is your advice on starting out with a 304 ss with 2B finish? Can you go straight to polishing also is there a proper break-in process for using new wheels? I'm using a bench grinder with wheel but keep getting small scratches. Any advice would be helpful....type if wheel etc

@Samuelfish2k 9 ай бұрын

Starting out with 304 finish with 2B finish? You make no sense!

@aaronnelson7220 3 жыл бұрын

One thing you left out what speed is he running buffer at so it doesn't burn or discolor the stainless

@glennrobichaux7490 3 жыл бұрын

Says it at the beginning. 3000rpm to cut and 1800 rpm to color

@elliotbauer5675 3 жыл бұрын

I see you used the yellow with the stainless compound. Is that the yellow buff that the second step yellow buff?

@SEMICasualShow 3 жыл бұрын

Start with the yellow buff, then move to the white buff and finish with chrome polish applying with a microfiber cloth by hand.

@almostchrome9412 3 жыл бұрын

I decided on the medium cut/color buff for this job because we were not doing any sanding. Just wanted a good medium blend cut.

@fukluk88 Жыл бұрын

So now I know what Shia Lebouf's brother does for a living.

@magic9980 3 жыл бұрын

💎🙌🏼🤚👍🏻

@jesserasso1042 3 жыл бұрын

Or already their

@johndoe-tf2jz 2 жыл бұрын

how you polish trim on my car its very daul

@TimHollis3006 3 жыл бұрын

Wayyyyy too complicated

@SEMICasualShow 3 жыл бұрын

That’s why we get Peter from Almost Chrome to do this stuff for us!! It’s an art to be that good at polishing.