Polycrystaline vs Monocrystaline Solar Panel an Output test.

Рет қаралды 4,210

Smilinsun Solar Energies

3 ай бұрын

Polycrystaline vs Monoycrystaline Solar Panel an Output test.
#solar #inverter #solarenergy #solarpanel
‪@MUSTENERGY‬

Пікірлер: 39

@amosmike7180 2 ай бұрын

All vedios your are intresting

@smilinsunsmilinsun8056 2 ай бұрын

Thank you Sir

@YunusaAWada 3 ай бұрын

Thanks for the insightful information and awareness.

@GTdontDOthat 3 ай бұрын

nice please do a comparation btw halfcut panel and none halfcut panel

@obinnajoseph8921 3 ай бұрын

You're doing great work

@smilinsunsmilinsun8056 3 ай бұрын

Thanks for watching

@linossinkala7840 2 ай бұрын

Wow loving thr video

@smilinsunsmilinsun8056 2 ай бұрын

Thanks

@adebayoabdullateef3110 2 ай бұрын

Just a proof point out my points nw … thanks for the video ❤

@smilinsunsmilinsun8056 2 ай бұрын

Glad you enjoyed it

@adebayoabdullateef3110 2 ай бұрын

I love this ❤️❤️❤️❤️

@smilinsunsmilinsun8056 2 ай бұрын

Thanks

@linossinkala7840 2 ай бұрын

Very interesting fight

@smilinsunsmilinsun8056 2 ай бұрын

Thanks for watching

@adex2000ng 3 ай бұрын

Thanks for this information

@smilinsunsmilinsun8056 3 ай бұрын

Thanks for watching

@akinwaleakintoye8304 3 ай бұрын

Well done.....Can we have Monofacial vs bifacial panel

@smilinsunsmilinsun8056 3 ай бұрын

Ok will do Thanks for watching

@oranusichigozie5219 3 ай бұрын

What about the tilting angle position?.....Are they at 15degree?

@smilinsunsmilinsun8056 3 ай бұрын

Yes

@enodavidpro 3 ай бұрын

Great review as always. Please check your title. You wrote poly vs poly.

@smilinsunsmilinsun8056 3 ай бұрын

Oh wow Thank you so much didn't even notice that.

@oluwafemijohn2748 3 ай бұрын

Thanks for educating us always, sir I have two batteries of 220ah and 230ah. Both in 12V, hope it's not bad using them together?

@smilinsunsmilinsun8056 3 ай бұрын

Batteries of different amperages should not be used together

@michaelakomolafe9249 3 ай бұрын

@smilinsun Correct, but it's not a bad idea as long as they are in parallel connection. I will not recommend the series connection for obvious reasons. When they are in parallel, 220AH battery gets to full charge first because they are in parallel connection and the 230AH will also get to almost full charge. Let's say 225AH storage or even 230AH depending on the charging parameter or inverter. Let's be theoretical here. Let's say the first battery is 10 ohms resistance connected in paraale to 11 ohms resistance (Second battery). The total or effective resistance is (10 x 11)/(10+ 11) = 5.23 ohms. Voltage drop increases with increase in resistance. This is why the voltage on the battery increases as current flows through the battery thereby increasing the battery internal resistance. Charging voltage increases by the increase in battery internal resistance. Full charging voltage is determined by the inverter as a result of the expected internal battery resistance which determines the charging absorption voltage. Another way to look at it is because the 2 batteries are in parallel. Using ohms law, the same voltage will be across both batteries, but the charging current will be different based on different internal resistances. This will continue until the resistance to stop charging current flow is reached for both batteries. Inversely when discharging, more current is discharged from the battery with lesser resistance (230AH Battery) then the low battery protection is reached when the resultant resistance for low battery protection is reached for both batteries. When the storage capacity (Amperage) for both batteries is wide, it is practically not encouraged. 230AH and 220AH in parallel is not totally a bad idea if there is no option of using the same battery amperage and brand. However, this is not a yardstick or a culture to begin to mix different batteries of the same amperage or different battery amperage of the same brand. My humble submission. Good job@smilinsun

@tangodigitalsystems 3 ай бұрын

I have always known this about Mono and Poly, Poly are very efficient in places like Northern part of the country where the sun intensity is crazy. Areas like Lagos, just stick with Mono.

@smilinsunsmilinsun8056 3 ай бұрын

Yeah Poly pulls in great energy all the time , Mono is so highly overrated

@alimamyfullah2716 3 ай бұрын

I was surprised also with mine making 5-10% power over my monocrystalline, but the opposite happens in lowlight and shading where the mono always win.

@billingsengineering 2 ай бұрын

The patch off is not a fair comparison for both. You need to check the orientation of the series and parallel connection of the individual cells on the panel. It's likely not identical

@smilinsunsmilinsun8056 2 ай бұрын

Lol very incorrect insight