POLYMER CLAY JEWELRY & TOOLS TUTORIAL: A.I. GENERATED PUOCAUN JEWELRY...

Рет қаралды 2,769

Күн бұрын

This video ventures into new territory when I show you how I create some new and interesting polymer clay jewelry by using A.I. images in polymer clay and using a new cutter Puocaun set as well!! I take a different look at how to use the transfer technique and using some new cutters when it comes to the clay!! I do hope you will take this in and CHECK IT OUT!!
I also hope you will RING THE BELL!! If you have already subscribed, but still didn’t ring the bell…Please, Do so! This way you will not miss out on any of my new videos, and you’ll be able to be one of the first who can make comments below on them!
00:00 Tutorial Titles and Materials
00:11 Creating your images using Adobe Firefly AI…
04:36 Creating the first set of jewelry…
11:50 Changing it up using a new set of cutters…
14:36 Using a different paper and creating the second set of jewelry…
24:19 Creating the spare set of earrings…
27:10 Creating the last AI set of Jewelry…
35:10 End Results
Check me out on my website and other places:
lauraseggs.com
/ laurajschilleroriginal...
/ laurajschiller
/ laura.schiller.735
Tools & Materials used in this video:
A Smooth Tile Surface
Baking Tiles
Pasta Machine
Needle Tool
Exacto Knife
Eyepins
Wire Cutter
Embossing Gun
Jewelry Findings
Super glue
Liquid Clear Translucent Polymer Clay
Needle nose pliers
Folkart Metallic and Colorshift Paint- Bright Red and Aqua Flash
Fine Tec Metallic Watercolor Paint (Silver)
Semi gloss Laser printer paper:
www.amazon.com/Semi-Gloss-Com...
Puocaun Polymer clay Cutters:
www.amazon.
com/Puocaon-Boho-Polymer-Clay-Cutters/dp/B0CCSF7LSL/ref=sr_1_1?crid=1AU9A5LVISXZC&dib=eyJ2IjoiMSJ9.1Gh5_gBNZnATs33zwbCGoQV0opKEZ2CSQAkMF5dsLOEwfL8DcAgRa5sGOxg5EPI0ByRLS8W-wFCpsTVOqwBAcFM6el4Ml6knvhZnCFtH3zBtcQKh-9uTe8ORVaczYWQwLEZk9aS_eeP3R7qijxSxHIiXk_M7TV0TVN-vs6iLaI7EukSgKwVzeJslZodg8MREyXSKyvzae-nPY3cHxMgScQaFUekj8cx3obvxgoa6_8SRvSavsHriVhzUAukGH1HUdwOsRW0n6ekNJmbFxTFdZHoAXg8Oyjb2-e6tPQGdWUY.nOsS2T8rWuss6857mJ_rC9TwvGCjhLC6MKGpOmYNylU&dib_tag=se&keywords=puocaun%2Bboho%2Bpolymer%2Bclay%2Bcutters&qid=1709159237&sprefix=puocaun%2Bboho%2Bpolymer%2Bclay%2Bcutters%2Caps%2C116&sr=8-1&th=1
Pointed backed Clear Crystal Rhinestones
Polymer clays: Clear Translucent & Translucent liquid clay, Black, White & Gray
Copyright 2024 by Laura J Schiller

Пікірлер: 42

@crystalmontgomery-yantzie2638 4 ай бұрын

I see no difference between using AI-generated images -vs- stock images. Your pieces are beautifully done! Thank you for sharing detailed information about how you obtained and used the images. Have a blessed day!

@laurajschiller 4 ай бұрын

WOW!!! Just wow...Thank you for this. Thank you for your kind compliment on my work here. Bless you!! I knew I was most likely stepping into a landmine with this subject matter, but AI exists. And I can't "ignore the elephant in the room" forever. Besides, you have made a very valid point here!! People have been using Stock Images for years now to help in the creation of their own work. AI just makes it easier. LOLOL!! Never thought about that until now. And also, thank you again for your compliment on the video information and how it helped. I am thrilled you enjoyed it. Sending you my biggest of big hugs!! :)

@DeirdreWSanders 3 ай бұрын

Stock photos pay the photographer. AI steals from artists.

@crystalmontgomery-yantzie2638 3 ай бұрын

@@DeirdreWSanders AI stands for Artificial Intelligence. The artist is a super computer.

@DeirdreWSanders 3 ай бұрын

@@crystalmontgomery-yantzie2638 the super computer is not an artist. It's generating images based on art it has scraped from the internet. Stock photos pay their artist. AI doesn't.

@pedaljet 3 ай бұрын

This blows my mind, thank you!

@laurajschiller 3 ай бұрын

You are most welcome, and humbly....thank you!! Hope you will have fun with it!! Big hugs! :)

@KimScrapper 3 ай бұрын

I really love all the techniques you used! What a clever idea for eyepin too. Off to watch more of your videos, thanks for sharing

@laurajschiller 3 ай бұрын

Thank you Miss Kim for your kind compliment!! I am so glad you enjoyed this so much!! And thank you for taking in more of my videos!! I hope you will enjoy them all!! Sending you big hugs! :)

@Tomhdg 3 ай бұрын

I am enthralled by these pieces and love what you have done. However, I did some research after following the provided link for the paper and I’m now completely confused 🤣. The link goes to 2 sided “unpealable” paper for me….. help! 🥴😜 (and is “unpealable” even a word??). That all said…. I don’t call this AI. What you used is basically .png background and foreground images that are cut and pasted automatically within the program itself (for instance, that boot disappears because of the internal program setting for opacity, which may or may not be adjustable by the user). AI is when the program actually creates from scratch with set perimeters, whether it is images, writing, etc. For folks like me who have - for decades and decades now - been working with .png’s that we manually manipulate, we still see it as art, either way that it is done. And that is because an *artist* can actually use them in other apps like photoshop and still make changes to the generated picture, we are just using our skills in a computer art format. That is what you did, and used YOUR imagination to choose which parameters to use. Art is art - and art is creativity from within one’s soul, using *any* form of medium. I can’t tell you how many times I have been told - paraphrasing - polymer clay isn’t really clay, and it’s just someone playing with plastic so it’s no different than the old shrinky dinks, AND that the jewelry is therefore nothing more than plastic junk… (the sheer audacity, right?!?!?). So, because of people’s disdain, I have learned a *truth* : It is the *value* of the art in an individuals eye & mind that simply defines like and dislike, and like & dislike is *not* the definition of what art *actually* is. Art speaks differently to each person, but dislike doesn’t mean it is not art. So, *you do you* , you wonderful soul, and keep creating the remarkable and often magnificent *ART* that you do! You owe no one an explanation or apology! Ever.

@laurajschiller 3 ай бұрын

I can't tell you how much I appreciate your comment here!! HOLY AWESOMENESS!! I really couldn't have said it better myself!! Thank you. From the bottom of my heart...thank you!! In fact, I will not even expand upon what you have said here...my comment would not do it justice. However, I will speak to the paper, and your inquiry there. This paper that I ordered is a semi gloss paper...no, not pealable. But that is what the clay does when you fire it using an embossing gun to heat it on the paper. It will pull up the ink and then you can use it in any project you might have in mind. I do hope that helps you. If you haven't taken in my 3 videos on the liquid clay transfer technique, these might clarify my process here. And if I have that all wrong and you still have questions on it, please let me know and I will do my best to help out where I can. Rule of thumb on the transfer technique is the glossy paper works great!! Again, Thank you so much for your comment. It made such a difference for me. Sending you my biggest hugs! :)

@linalinux 3 ай бұрын

Good job, fun stuff and good information! 👏

@laurajschiller 3 ай бұрын

Thank you so much!! I hope you might try your hand at some of this too!! Hugs!! :)

@selene4621 3 ай бұрын

I am alsoi in the colouring community and omg the ones for and against AI is just mind blowing some are so totally against it that they refuse any images that are AI generated and sometook the time to colour them . For me perosnally i love AI as you said it is a tool that you can use. Even Jazza from Jazza arts tried it out and said yes it is a tool that can be used to help artists no matter what they are. What you did with this is just brilliant I LOVE IT !!!

@laurajschiller 3 ай бұрын

Thank you again for your kind support, Miss Selene!! Bless you!! I did get some rather "not so nice remarks" on this matter as well. I try to always keep an open mind and especially with new material or technology that can help people. I understand the cons, but I also know that when you "never say never"?....well, it comes back to bite you in the....well, you get what I mean. LOLOL!! I just figure it's best to try and figure out how it can help artisans and let it go from there. Call me, a "glass half full" person...I try to look for the silver lining. Again, though...it means alot to me that you support me here. I am not big on creating controversy but, I also go where the muse takes me too. Sending you my biggest of big hugs! :)

@jka4649 3 ай бұрын

Very cool. Thanks

@laurajschiller 3 ай бұрын

You are most welcome!! Hope you will continue to enjoy the videos I create here. hugs!! :)

@leafry101 3 ай бұрын

You are one talented lady Laura. These piece's are stunning.

@laurajschiller 3 ай бұрын

Awwww...thank you!! I hope I have inspired you to create some fun pieces of your own!! Sending hugs! :)

@carolhammond9624 4 ай бұрын

Never apologize for making beautiful things to wear. it’s no different than using Waterslide images or any other type of embellishment. ❤❤❤

@laurajschiller 4 ай бұрын

Awwwwww. Lady, thank you for your kind support!! I truly appreciate it. As controversial as the whole AI thing is....I had a feeling I would most likely be walking into a mine field. However, I couldn't ignore what the technology does. And between what you are saying here...which is very true, Waterslides are just another persons work that you are using to create a beautiful something and what Miss Crystal said...I have to agree with you and her. Again, thank you lady for your compliment and your support!! Sending you my biggest of big hugs! :)

@Tkup100 3 ай бұрын

Fantastic job Laura. I love the AI images. Love the pieces you created. ☺️🙏💕

@laurajschiller 3 ай бұрын

Thank you so much!! Wow!! I do hope you will create some too and have some fun with this new technology. Sending you my hugs! :)

@QBeth.3 3 ай бұрын

One word --- Fabulous!

@laurajschiller 3 ай бұрын

Thank you so much!! I hope you will look into the AI thing and have some fun!! Sending hugs! :)

@gailgarbe 3 ай бұрын

Fantastic concept! Thank you for sharing!💕💕💕

@laurajschiller 3 ай бұрын

You are absolutely most welcome!! I am thrilled you enjoyed it so much...I also hope you will create something similar using some AI!! Thank you for your compliment also...it keeps me creating and doing more videos!! Big hugs! :)

@gabrielleschmidt1435 4 ай бұрын

🎉These are absolutely awesome 😊

@laurajschiller 3 ай бұрын

Thank you and You are most welcome, Miss Gabrielle!! I am thrilled you enjoyed this and I hope you will continue to enjoy the videos I create here on my channel!! Sending you my hugs! :)

@cailinsuiledonn 3 ай бұрын

love this idea, I've just ventured into the world of AI creating and was thinking how great they'd be in my jewellery, great minds think alike🤣 2 question, 1/ do you not seal you pieces ? and 2/ when your printing your images how do you size, I can never get this right 🙃, appreciate any advice

@laurajschiller 3 ай бұрын

Thank you so much!! And as to your questions...1. Yes and no. Seal, as in the ink trapped inside the clay, yes. Approved of water based varnish or resin over the clay, depends upon the situation and what kind of project I am dealing with. Also, what kind of colored clay I am sealing. Resin does not do so well over time with lighter colors and yellowing tends to happen. Varnish works, but can diminish mica finishes found in pearl ex and other powders. Which is why I am soooooo in love with my Fine Tec Metallic Water color paints right now. 2. When it comes to sizing, I suggest printing out a test sheet to see the size and what it looks like before you print on your specialized papers. Otherwise, I would also look at the program you are working with. I use pages alot, and in one area, I can find what the size of the image is. This helps me immensely get an idea of what the size of the image will wind up being. I do hope this helps. Sending you my hugs! :)

@cailinsuiledonn 3 ай бұрын

@@laurajschiller thanks so much for your reply. I'm a bit confused though.... re sealing ... do you paint over the printed images with Fine Tec so you do not have to seal them ? About the sizing, I'm a Windows girl on Android, but I'm sure I'll work that out.....eventually 😂.

@luannfino1371 3 ай бұрын

Is freezer paper the same as wax paper or Parchment paper Or Delhi paper

@laurajschiller 3 ай бұрын

So, I see freezer paper like wax paper, except it isn't strictly "wax". It isn't parchment or deli. But more like wax on a piece of paper. I do hope this helps. Big hugs your way!! :)

@nathaliepeignieux4349 4 ай бұрын

😮❤❤❤🎉🎉🎉😊👍🙋‍♀️💋💋💋

@laurajschiller 4 ай бұрын

Thank you so much for this!! I loved every emoji!! LOLOL!! Big hugs your way!! :)

@bodeetje 3 ай бұрын

Can I do this whole process with an inkt jet printer...?

@tahomyjo 3 ай бұрын

Hi, you said do NOT buy the photo paper BUT you have a link to the paper I thought you used in your description so I spent 15.00 to by it from your link to Amorim but then you mentioned not to use the photo paper but it clearly states that it is semi glossy photo paper? I need to cancel this order if this is not correct so I hope to hear back asap .

@tahomyjo 3 ай бұрын

I meant to say from Amazon and not from Amorim 😊

@laurajschiller 3 ай бұрын

It’s all good. This is the paper I recommended. Hope that helps.

@tahomyjo 3 ай бұрын

But you said whatever we do do not buy “photo paper” in your video? I’m confused

@laurajschiller 3 ай бұрын

@@tahomyjo - Okay, I think I have it for you. Don't buy inkjet paper or any Photo inkjet paper. Laser photo paper is a yes. The paper I recommended in the video is the paper I used. So, I was able to reccommend it since it worked for me. The reasoning behind not using Inkjet paper is because Inkjet and Laser printers work very differently from one another. Inkjet is actual ink that goes down onto the paper and it drys on there. When ink is put onto the paper, there is no heat process in doing so. When you make a laser print, to get the pigment/ink onto the paper, it has to be heated by the printer to adhere to the paper. Which is why the transfer technique with laser paper works so well, the paper is already accustomed to being heated and why the paper is not affected like an inkjet paper is. I had some inkjet photo paper, I tried to do a transfer from it and it DEFINITELY did not like the heat. And in fact, the paper curled up on me and transfer was ruined. Sorry for any confusion, lady...I hope this will help. Hugs! :)