We tour Liqui Moly's factory and share how its oils and additives work

Рет қаралды 5,765

Күн бұрын

Subscribe: kzfaq.info...
Visit: www.pca.org
-----------------------------------------
In this video, Vu Nguyen speaks with the employees who formulate and test Liqui Moly's products and then goes on a short factory tour to see how those products are made.
Here are the Liqui Moly products shown in the video:
Cera Tec: www.liqui-moly.com/en/us/cera...
Pro-Line Engine Flush: www.liqui-moly.com/en/us/pro-...
DIJectron: www.liqui-moly.com/en/us/dije...
Touring High Tech SAE 20W-50: www.liqui-moly.com/en/us/tour...
Leichtlauf High Tech SAE 5W-40: www.liqui-moly.com/en/us/leic...
#LiquiMoly #PorscheClubOfAmerica
-----------------------------------------
Instagram: / pcanational
Facebook: / porscheclubofamerica
Twitter: / pcanational

Пікірлер: 30

@1274anil 11 ай бұрын

Been using their products for years in all my euro vehicles not just Porsche. Looking forward to seeing more factory tours of complementary products for our favorite cars

@PorscheClubofAmerica 11 ай бұрын

More to come!

@liquimolywebtv 11 ай бұрын

We are very pleased that you are satisfied with the quality and handling of our LIQUI MOLY products.

@chadddada 11 ай бұрын

Thanks to both PCA and LIQUI MOLY for this discussion and tour. Fun stuff! Vu and the channel have been doing so well with great content for a while now.

@PorscheClubofAmerica 11 ай бұрын

Our pleasure!

@liquimolywebtv 11 ай бұрын

Thank you for the positive feedback!

@Duchydog 11 ай бұрын

I do use their gas additives such as Jectron, Complete Fuel Cleaner, Valve Cleaner plus the oil additives such as Ceratec, MOS and Oil Saver.

@liquimolywebtv 11 ай бұрын

Thanks for sharing your products!

@hughmann1908 11 ай бұрын

I thought Porsche (modern) frowns on any additives? I was told before that if you do a gas cleaning you should flush the oil afterward, not true?

@liquimolywebtv 11 ай бұрын

Our additives have been tested thoroughly.When they are used like stated in the product information they work flawlessly on any car. When you use e.g. our Injection Cleaner, an oil change is not necessary.

@garylitwin7312 11 ай бұрын

Been using Mobil 1 in my 911. Change oil every 6 months; and send oil for analysis. Switched to 5w-40 LM Leichtlauf. Oil analysis showed increase in wear of iron, chromium and aluminum. LM wear additives on low end… molybdenum @15ppm; phosphorus @880 and zinc @ 1019. I am changing to Red Line. Won’t be using LM again. Just sharing my results. Be interested to see what others have experienced.

@PorscheClubofAmerica 11 ай бұрын

Thank you for sharing.

@jeffhammond8969 11 ай бұрын

Nice! One question on injector additive, if you have an older port injected engine, do those use the same additive, or is there a different one that should be used?

@kennylevine1 11 ай бұрын

Steffen great video!!

@PorscheClubofAmerica 11 ай бұрын

Glad you enjoyed it

@wwilliams1358 11 ай бұрын

On the engine flush, how often does it need to be done? Every other oil change? 5k milesK etc. And did I hear correctly to let the engine idle for 12 minutes? Thank you for your products, I'm currently using the Ceratec, DI Jectron, and Speed Tec. This is on my 991.1 CS.

@nicolasreiller9596 11 ай бұрын

Thanks for the tour. A question regarding the "engine flush". With German Engineering and all the spray barres we can find in their engines, all the sludge now free on the engine wouldn't seal the small holes of the spray barres ? Causing some potential dramatic effects ?

@liquimolywebtv 11 ай бұрын

The sludge will be diluted in the whole ammount of oil and Engine Flush and through this, nozzels and bores will not be blocked.

@nicolasreiller9596 11 ай бұрын

@@liquimolywebtvThanks for the feedback. I also had some feedbacks about the fact that it could cause seal leaks on older engines and therefore that engine could start leaking oil after the use of engine flush. What could cause that ? I'm using your mos2 on my older Porsches and Ceratec on newer ones and love your products. However, I'm always a bit concerned about engine flush products in general. Thanks in advance for your feedback on that.

@stephencurry8552 11 ай бұрын

I use the friction modifier by Archoil. Makes all my cars including my 911 run so much smoother. Though I also use Luquimoly products as well. The Archoil friction modifier is amazing. I turn the key, and the engines do fire up with fewer cranks.

@PorscheClubofAmerica 11 ай бұрын

Thanks for sharing!

@liquimolywebtv 11 ай бұрын

Thanks for sharing your experience!