Thanks for redoing this. Idea, I really wanted to watch it all but the original had a soundtrack that made it hard to hear you. Many people would not bother to refine their videos, thanks again
@KeysBoatingChannel2 ай бұрын
You're welcome! Thanks for your comment and watching our video! Peace from the Keys!
@markdimaio8396 Жыл бұрын
I really like the cord you outfitted. Nice job. I ended up buying that exact same generator. Will run my 10K BTU AC with no issues. That model has the largest non Honda model size out there. Highly recommend
@KeysBoatingChannel Жыл бұрын
Hi Mark! My Brother thanks so much for watching and your support! Yes, this generator has been one of the best I've used too, I'm very happy with it. Blessings! Peace from the Keys!
@goferizer Жыл бұрын
Nice job on this. A word regarding your CO detectors. Ideally, they should be mounted as close to the deck as possible because CO is heavier than air and it will "pool" in lowest areas. If placed high up as in your application you may already be overcome/unconscious from the gas to hear the alarm from the higher mounted position. I say this from experience. This is a common occurrence in RV's and campers, especially in the winter when heaters are running.
@KeysBoatingChannel Жыл бұрын
Thanks so much! Great information Bro! The CO detectors in my boat was installed by Bayliner, go figure they should have known this. But I wanted to add 2 more CO detectors one in the cabin and another one in the cockpit area (waterproof). Brother, again thanks so much for watching our video! Peace from the Keys!
@2BearsOutdoors Жыл бұрын
Love the video. You always make the coolest gadgets for your boat. The alarm is a great add on. And don't forget it causes dieria and smelly butt gas. 😂😂😂😂 Awesome video.
@KeysBoatingChannel Жыл бұрын
My Brother thanks so much for your support! Lol...Peace from the Keys!
@2BearsOutdoors Жыл бұрын
@@KeysBoatingChannel ❤️❤️❤️😁🤙
@SeaJunkiesChannel Жыл бұрын
Thank you Jorge!!! This video is awesome. We want to add a generator just like this one to our new boat for more than just one overnight and you answered all our questions!!!! Very simple explanation and to the point!!! 😊 we were looking to get the one with the CO sensor but we can't find it. It looks like it is discontinued. We will have to get separate CO detectors. How much gas does it take for an 8 hour cycle using it? Thank you!!! 🙏🙌
@KeysBoatingChannel Жыл бұрын
Hi! Glad it was helpful! One full tank would last like 6 to 8 hrs approx sometimes more...it depends on the power demand. The sensors are very important the more you put the safer you will be. If you need anything call me, Gus has my number. Blessings! Peace from the Keys!
@Sharloboy5 ай бұрын
Hi .. do you have pictures or video of how you installed the retractable cleat for the generator? I’m looking to place one and the same area for my generator. Thanks
@KeysBoatingChannel5 ай бұрын
Hi, thanks for watching our video. I will have to go by the boat and take pictures for you. Peace from the Keys!
@Sharloboy5 ай бұрын
thank you@@KeysBoatingChannel
@JohnBraman413 Жыл бұрын
how much you charge to make a mounting plate for generator? i have the same boat.
@KeysBoatingChannel Жыл бұрын
Hi John, I would have to check for the current price of starboard, it's very pricey. I did mine many years ago. Email me at keysboatingchannel@gmail.com Thanks for watching! Peace from the Keys!
@Sharloboy Жыл бұрын
Hi , I’m looking to place my generator in the same spot. How did you attach the retractable cleat to your swim platform? I don’t see a clear way to get to the bolts from the bottom. Did you get to it from the engine compartment? Any suggestions you have would be greatly welcomed 😊
@KeysBoatingChannel Жыл бұрын
Hi, thanks so much for watching our video! What I did is a 8" cutout on the floor inside the stern storage locker near the area where I installed the Retractable Cleat. Here's the product link: amzn.to/3OEWt8F its also in the description of this video. This new opening will give you the direct access to install the thru-bolts for the cleat. Hope this helps! Great question! Peace from the Keys!
@Sharloboy Жыл бұрын
Thanks for responding, if it’s not too much to ask do you have a picture of where you did the cutout. I think I have an idea but I’m always nervous about making cuts or holes in the boat so just want to make sure. Thanks again. Your videos are fun an very informative to watch 😊
@KeysBoatingChannel Жыл бұрын
When I go by the boat I will take a picture for you. I will post it in our community post. I will alert you here when I post it. Thanks!
@Sharloboy11 ай бұрын
@@KeysBoatingChanneldid you ever get a chance to take a picture of the 8” cutout on the floor in the stern storage area?