No video
Portal 4ws Ryft with 2.6" Vitavon Beadlocks and Proline Black Mamba Tires!
Рет қаралды 40,712
Күн бұрынThese 2.6" Beadlocks are AWESOME!!! Links below for the Ryft and the parts and pieces, there are a lot!! Use the links to help support Exocaged RC, Thanks!!
Vitavon 2.6" Beadlocks
Ebay ebay.us/csmodO (Silver with Black Ring)
Ebay ebay.us/RFVh3H (Green with Black Ring)
Ebay ebay.us/DTk9th (All Black)
Ebay ebay.us/worB7f (Orange with Black Ring)
Proline Black Mamba Tires
Amain bit.ly/3BFkAwM
Ebay ebay.us/fcar1n
Amazon amzn.to/3iVpaQ9
Horizon bit.ly/3CZFneU
Vitavon Portal Kit on Ebay
Portal Kit 4ws ebay.us/ekmcmP
Portal Kit Front and Rear ebay.us/v20KvF
Axial Ryft
Amain bit.ly/3skmAWK (Orange)
Amain bit.ly/3iKnkkV (Black)
Amazon amzn.to/3jZDJkS (Black)
Ebay ebay.us/FHNi2A (Black)
Horizon bit.ly/3gc2Mjy
Castle Mamba X Esc
Amain
Ebay ebay.us/WXMR3M
I have some stock of Vitavon parts, email me at exocagedrc@yahoo.com , I don't have any of these portal kits instock at this time
All Vitavon Links are on Ebay ebay.us/F2HMBP
Portal Kit 4ws ebay.us/ekmcmP
Portal Kit Front and Rear ebay.us/v20KvF
Skid ebay.us/YOlyHu
Swaybar ebay.us/eYDKCw
Linkset ebay.us/imiqyl
Rear Lower Arms ebay.us/zEyKHZ
Input Shaft ebay.us/xCMOKN
Trans Case ebay.us/SSGI88
Front Axle ebay.us/v6PRKd
Rear Axle ebay.us/qnSPmF
Rear Steer Axle ebay.us/DRc0iq
Front and Rear Axle Set ebay.us/Klifrw
Knuckles ebay.us/dUkiPG
Diff Cups ebay.us/h5ckoZ
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc
@ohwell2790 Жыл бұрын
I am the luckiest 78 year old new to RC. My next door neighbor and young guy ( 41 ) had a brushless 2S set up with a Li-po 5,000 ma battery that he wasn't using and he installed in my Arrma Senton short track truck and even soldered up the battery leads to match my charger witch has a Li-po mode. How cool is that. This is a great hobby, just found your channel, nice video.
@ExocagedRC Жыл бұрын
awesome man, the hobby is addicting and I'm glad to have you
@jdsrcs8061 3 жыл бұрын
The extra width makes them look much better. The new wheels sure are purdy!!!🤘🤘🤘
@bbeckers24 3 жыл бұрын
The 2 wheel sideways save when you were just way to hi on the crack o doom was awesome.
@ExocagedRC 3 жыл бұрын
LoL yeah that was full throttle backwards and I got lucky.
@rcpete7055 3 жыл бұрын
I love watching this channel every day its my guilty pleasure 🤫
@ExocagedRC 3 жыл бұрын
That’s awesome. Thank you!
@toddmiddleton1442 3 жыл бұрын
I imagine that you’re planning to build a mega-crawler with those axles. I absolutely can’t wait to see what you come up with. Awesome videos as usual brother.
@ExocagedRC 3 жыл бұрын
😆😆😆 yep!! Collecting parts now. So the Ryft will go back to the straight axles for speed.
@toddmiddleton1442 3 жыл бұрын
@@ExocagedRC it’s gonna be awesome !!!
@dirtyfingersninja 3 жыл бұрын
Nice! It's 5am in TX and i got something to watch before work!
@tonyromano6220 Жыл бұрын
Work of art
@ashleyconnelley556 3 жыл бұрын
Those look so much better on those wheels
@andrewupsidedown Жыл бұрын
Glad to see a wheel that won't strip. The first 5 min I ran the black mambas on stock proline wheels I stripped a hex 🙃
@rcfungames 3 жыл бұрын
Those rims look sweet and the tires 🤯 👊😎
@jhawk1985 3 жыл бұрын
Those wheels need to be on my Custom SMT10 asap. Dang it Vitavon 🤣 The save at 9:22 was funny. Its was like slow motion.... Nnnnnnoooooooo !!!! Lmao
@ExocagedRC 3 жыл бұрын
🤣🤣🤣
@ashleyconnelley556 3 жыл бұрын
I knew it was just the horn that raw 500 is a beast lol
@andrewrichey7374 3 жыл бұрын
Love the new wheels and tires , Looking awesome
@stevemdelacruz5602 3 жыл бұрын
Wow that is some ryft there
@petermakeithappen8336 3 жыл бұрын
What a machine!!! It's a total beast!!!⁷
@rc-daily 3 жыл бұрын
Vitavon offers the best wheels imo
@jordandale1642 2 жыл бұрын
do they make a wheel that fit these tires with 17mm hex? I would like to try to put on 1/8 buggy this winter.
@brandonreid4511 3 жыл бұрын
Awesome video as usual! There is a brand new FULL Vitavon Ryft build for sale in my local area and I want it so bad!! Has the carbon body panels and everything looks amazing 👌🔥🔥🔥
@ExocagedRC 3 жыл бұрын
I’ve actually got carbon panels in blue and one set in black. One day I’ll put one on there.
@brandonreid4511 3 жыл бұрын
@@ExocagedRC that's awesome! They are the black one's on the one for sale here but I think Red carbon has to be my favorite 👍
@LidZLife Жыл бұрын
Great video!
@DirtRoadBoyz2 3 жыл бұрын
This thing is one bad rig dude!
@andrewrichey7374 3 жыл бұрын
Yeah that was a great save
@Houleigan 3 жыл бұрын
I plan on getting a set of the Black Mamba's for my Typhon after seeing you doing it!
@jakequaempts5234 3 жыл бұрын
Awesome save lomao
@ExocagedRC 3 жыл бұрын
thanks! I got lucky
@hobbiesemgeralcarlos6542 3 жыл бұрын
Kkkk esses pneus aí sim é pra jogar terra longe, um abraço
@abbarc5312 3 жыл бұрын
nice 👍 👍 👍
@camrowdrone6497 3 жыл бұрын
Enjoyed 👊🏻👍🏻
@The_Privateer 3 жыл бұрын
LMAO Dude - that save @9:22 was re-F'ing-diculous. The 'no-swaybar' test was really interesting, I really appreciate you doing it since it's something I've been thinking and wondering about. It looks like it's almost too much suspension movement in the rear now, or at least 'too floppy' and uncontrolled. Maybe some shock/spring tuning would make it behave a little better in that configuration? And obviously - more appropriate 'crawler' tires. I'm a little torn on adding portals, only to then gear back up with a bigger pinion. Seems like it kind of defeats the purpose.
@ExocagedRC 3 жыл бұрын
Well, these portals are for the guys who really want to crawl the Ryft, Once I get all my parts in, these portals are coming off and going into the new build.
@rueagonvyceratops2879 3 жыл бұрын
id love to get vitvon stuff for my ryft , but the prices are just pricey , for my low budget income .
@MannyGunzz 3 жыл бұрын
I'm hoping they make sum like this but a bit wider for my monster truck ???
@ExocagedRC 3 жыл бұрын
You shouldn't need any wider than this, this is like an AR60 with 1" wideners
@JoeOvercoat 3 жыл бұрын
You broke a horn but not the servo! Impressive servo.
@ExocagedRC 3 жыл бұрын
These raw500’s have a really strong geartrain. I’ve broken several horns but never the servo.
@ShadeTree_RC 3 жыл бұрын
sweet
@rckiller6422 3 жыл бұрын
Nice 😎
@Nick.Barnes 3 жыл бұрын
those wheels look great with those tires mated up! do you have a video showing the steering upgrades you did with affiliate links? i'm interested in that servo and horn and drag link set up for mine... still waiting on all the rest of the vitavon rolling chassis to get here. great videos, you are my go to channel for info, thanks!
@ExocagedRC 3 жыл бұрын
Sorry so late on response. Yeah I think I have a whole video on that Servo AF saver.
@Nick.Barnes 3 жыл бұрын
@@ExocagedRC no worries man, thanks for the reply, i'll try to find the video. i'm stoked to get started on this ryft build, i just got all the parts tonight, SUPER fast delivery from vitavon!! 3 days lol
@endosrc 3 жыл бұрын
U had stickies on before right
@ExocagedRC 3 жыл бұрын
Yep
@readeracingRC 2 жыл бұрын
Dude??? so im kinda new to the hobby. sorta. I'm kinda a Arrma fan. i have the 6S and the 8S Kratons and a 6S Outcast. (well couple Maxx's and Redcats.) with decades of motocross. I wanted to get something different. So i went and bought and put together a Ryft kit. Gray w/o electronics. I dyed the gray to a Royal Blue. i tossed in a couple electrics to make it work. not so great. I had no idea there was so much into aftermarket parts and upgrade for the Ryft. So i have a spare 2300kv from a Maxx (no ESC) My question is could i get away with buying a 130amp ESC spectrum and run the maxx motor (mini maxx 4S). and not burn anything up or catch fire??? lol i want to slowly add aftermarket parts but have to go inexpensive. im ordering a receiver (3 channel) so i can use my DX5C today. Will it get me by for a while or would it just be a flop and later having to buy something else. im trying to catch up on your videos for info Thanks for your videos and lots of help. keep em coming.
@justgallupin3666 Жыл бұрын
What type of transmitter and receiver are you running in your ryft?
@RuisRcAdventures 3 жыл бұрын
Very nice run Joe, those tyres are awesome. I recently bought a set of Proline Badland tyres for my desert buggy and i'm amazed how good they are. Do you think i should tape the holes to stop them venting though? I run it mostly off road in dusty conditions. Thanks in advance.
@RuisRcAdventures 3 жыл бұрын
@Yanick Heber thanks bud 👌
@ExocagedRC 3 жыл бұрын
Yeah seal them up.
@RuisRcAdventures 3 жыл бұрын
@@ExocagedRC cool, thanks Joe 👌
@tonyromano6220 Жыл бұрын
7:24 unreal
@stevemdelacruz5602 3 жыл бұрын
1000 beans in that on easy
@ExocagedRC 3 жыл бұрын
EASY.... Possible 2000 beans by now..
@stevemdelacruz5602 3 жыл бұрын
@@ExocagedRC whoa. But its killer .my wife would kill me
@JJunior615 3 жыл бұрын
Do you know if the black mambas fit on the jconcepts wheels?
@ExocagedRC 3 жыл бұрын
Yep they do
@JJunior615 3 жыл бұрын
@@ExocagedRC thank you so much for your help
@JJunior615 3 жыл бұрын
I noticed it said it sells 1 piece, so does a single wheel cost 40 or is it for 2 wheels?
@ExocagedRC 3 жыл бұрын
$40 each wheel
@julianboyd4921 3 жыл бұрын
How much of that Ryft is still an Axial?
@ExocagedRC 3 жыл бұрын
Most of the internals and the cage and shocks. LoL
@lane5400 2 жыл бұрын
Does it have rear steer?
@ashleyconnelley556 3 жыл бұрын
I need a set
@vidalfonseca380 Жыл бұрын
What axels are those ? Front and rear
@xxdogg2000 Жыл бұрын
where can i find the crushlock wheels??
@cheagle464 3 жыл бұрын
Still like to know what where how about your stands?
@ExocagedRC 3 жыл бұрын
I printed them from thingiverse.
@cheagle464 3 жыл бұрын
Oh, well I haven't got into printers yet. But they are pretty cool. I'll just figure Something out. Thanks man
@ashleyconnelley556 3 жыл бұрын
Are you running 4s
@ExocagedRC 3 жыл бұрын
yep
@Oktourqerc Жыл бұрын
Those tires look evil!
@bigballmagrawl0929 2 жыл бұрын
yo put the 2.6 on the clod for me please would love to see if they work
@donald2818 2 жыл бұрын
Why does it sound like it has sand in the gears?
@Tuidkskiwjdhdbd 3 жыл бұрын
The price isnt nice lol great video
@dustinfishburn5353 Жыл бұрын
I just built a ryft. I want to set it up to be more of a crawler/trail runner. I put a hobby wing 2 in 1 motor with a 3mm output shaft. I ordered an axial 32 pitch for the 3 mm output shaft in the gears are not right do you know what pitch would line up to the spur gear with a 3 mm bore output
@ExocagedRC Жыл бұрын
Yeah buddy I wish axial would fix that. It’s not 32p it’s Mod1. You need another new pinion gear. 13t Mod1 is the smallest you can use in the Ryft. Most mod1 pinions have a 5mm bore so you’ll need the little adapter to make it fit on a 3mm shaft motor.
@mikeupton5406 3 жыл бұрын
Elon and SpaceX called, they want their Mars rover back....
@josephaliff3458 3 жыл бұрын
The ryft in my book is more of a basher than a crawler everybody I heard from really don't know what it is it's not the greatest at crawling it's not the greatest of bashing that is more fun bashing than it is crawling LOL
@ExocagedRC 3 жыл бұрын
It’s a bouncer not a basher or a crawler. Whole different category from those two
@josephaliff3458 3 жыл бұрын
Well that's why I watch your channel so I can learn thank you for the correction now I won't sound like an idiot LOL I love watching your videos you really inspired me a lot I'm getting ready to start building my first crawler I've got a basher it's a Mt 10e on steroids
@old-rcplane-phart 3 жыл бұрын
Does anyone make an aluminum 10th scale SCT wheel? (Special application)👍
@jhawk1985 3 жыл бұрын
Vitavon makes them. Check out RC4WD too. Lots of wheel makers out there now. Also check out Martin Brothers Rc wheels
@old-rcplane-phart 3 жыл бұрын
@@jhawk1985 Thank you! 👍
@elisedodson7715 Жыл бұрын
😅😂i love you
@Art-zs6sl 3 жыл бұрын
I think your Ryft would look better if you dyed the cage. That orange just doesn't look great with all the aluminum. It's the best Ryft ever anyway though.
@ExocagedRC 3 жыл бұрын
I’ve been thinking of getting the kit white cage for it. Then dye it orange. LoL nah. I haven’t dyed anything in a lot of years.
@dezfan 3 жыл бұрын
IMO the. Ryft is the biggest flop in recent RC releases that I can remember. That’s saying a lot with as many bombs as Horizon has released.
@ExocagedRC 3 жыл бұрын
flop? heck no man this is one of my favorites!
@dezfan 3 жыл бұрын
@@ExocagedRC massive flop! 6 locals bought one. 6 have been sold. To many issues. To many broken parts, to much down time waiting on parts, to expensive to start with only to have to dump as much as you do to “fix” it. I refuse to spend as much as the manufacturers are asking only to spend more than the kit price to “fix” it.