No video
Ultimate Ryft Build Troy Edition
Рет қаралды 26,260
Күн бұрынThis thing turned out GREAT!!! I did all the tricks I know to the transmission case to get full shifting and set everything else up as best I can. Links are below for the Ryft and all the parts used in this build, take a look and help support Exocaged RC, Thanks!!!
Transmission build details at 3:50
Axial Ryft RTR
Amain bit.ly/3iKnkkV (Black)
Amain bit.ly/3skmAWK (Orange)
Amazon amzn.to/3EAsdGn (Black)
Amazon amzn.to/3hHO5FT (Orange)
Ebay ebay.us/ygiuEK (Black)
Ebay ebay.us/n8RvdP (Orange)
All the Vitavon parts
Front and Rear Axle housing ebay.us/Klifrw
Front Axle housing ebay.us/ge78hk
Rear Axle housing ebay.us/qnSPmF
Input Shaft ebay.us/xCMOKN
Trans Case ebay.us/SSGI88
Knuckles ebay.us/dUkiPG
Links ebay.us/UEuOtU
Rear Arms ebay.us/m1SU4x
2.2 Beadlock Wheels ebay.us/Os2sHc
Diff Cup ebay.us/zpbEZf
Steering Link with Saver ebay.us/Tx1yP4
Front Swaybar ebay.us/vxqkVz
Rear Swaybar ebay.us/ZOuDZM
Servo AF Model A Servo www.servoaf.co...
Reefs RC 99 Micro www.reefsrc.co...
Amain bit.ly/37mzBpj
Ebay ebay.us/RSvzMo
Kyosho 5x7 shim set
Ebay ebay.us/b0YMJO
Castle Mamba X ESC
Amain
Ebay ebay.us/KRRcB4
Holmes 2100kv Motor 540 L
Holmes Hobbies holmeshobbies....
Ottsix USD Sticky
Ottsix www.ottsix.com...
CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look! / @exocagedrc
@robgoffroad 2 жыл бұрын
Love those orange wheels!
@Houleigan 2 жыл бұрын
Wow! Expensive build! Looks amazing though! Excellent job!
@mikep.9338 3 жыл бұрын
No lie those lectrons are some good lipos picked up a couple awhile ago still going strong
@Nick.Barnes 2 жыл бұрын
thank you for putting this video out! i just went through all these upgrades on mine and i've been on the fence about two speed and now i can do it correctly if i actually decide to go that route. vitavon parts are amazing and i thank you for turning me onto them!
@calebgilmore3327 Жыл бұрын
About to be doing a lot of this to mine! May have to reference it as I go.
@old-rcplane-phart 2 жыл бұрын
Now, its a $5000.00+ ryft!
@mikeboncheck5555 2 жыл бұрын
Can't wait for the front sway bar set up... Mine should be here by the end of next week
@RuisRcAdventures 2 жыл бұрын
That was awesome Joe, your mate is gonna be really pleased with that for sure. Let's see if he runs it on 4s 👌
@ExocagedRC 2 жыл бұрын
He will I’m sure
@mikep.9338 3 жыл бұрын
Lord all them goodies it's Christmas 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾 wished I had went vitavon instead of kyx
@ExocagedRC 3 жыл бұрын
Oh man. Yeah. Have you had any issues with kyx?
@mikep.9338 2 жыл бұрын
@@ExocagedRC no...no issues at all some things from kyx are alright but for the most part their stuff is jus bland,when you look at vitavon your like damn that's some good stuff right there. I never thought vitavon would come up like they have, their work is really nice and from the abuse you bestow ,their product would probably outlast me lol. I do want a set of the ryft axles for my last build but Brother you have a wonderful day👍🏾👍🏾👍🏾
@timvanasen6711 2 жыл бұрын
Nice build Joe, Troy will be very happy 😉👍
@GrimJerr 3 жыл бұрын
I haven't been driving mine as much as I like. Just got Vanquish servo horns and some rod ends until i can afford to upgrade to the Vitavon Steering Links and servo saver. I was tearing up th Axial horns whenever I hit anything solid with force.
@boharris8179 2 жыл бұрын
I use the plastic skid, transmission and plastic steering knuckles. Also the stock driveshaft and for the diff just blast it out with break cleaner then fill it up with JB weld. Aluminum housings front and rear with upper links and sway bar and wheels. Some guys run everything metal also some rigs use rear trailing arms for the front. Next you should try a metal custom made chassis.
@phillipgatelein8591 2 жыл бұрын
Sweet tyers!
@gordonthorn2049 2 жыл бұрын
Appreciate it. I think I'm gonna copy this build. Gotta have a better rc than my brother.
@ExocagedRC 2 жыл бұрын
LoL
@johnc3399 2 жыл бұрын
When you gonna put on a Ryft comp at the exoplex? My ryft is built and ready.
@ExocagedRC 2 жыл бұрын
I’m still saving up for dirt to build a few climbs and I’m planning to race them too.
@GreatLakesRC 2 жыл бұрын
Good lord that's alot of aluminum 🤩
@chadlunsford6730 2 жыл бұрын
I'd like to see a battle between the Ryft and the Windengo :)
@jeffparryncc1701 2 жыл бұрын
I'd like to see the foam on the scale be used as a tire insert :) Looks great.
@GrimJerr 3 жыл бұрын
My Vitavon 4WS RYFT Bouncer "Bumble" comes in at around 13lbs. with 4s battery
@ExocagedRC 3 жыл бұрын
That’s heavier than mine.
@jonthomas8487 2 жыл бұрын
The only thing that’s left from the original Ryft is the cage, shocks and gears. Crazy
@Houleigan 2 жыл бұрын
Also can add rear steer if wanted!
@ExocagedRC 2 жыл бұрын
Yep!
@spawairguns4950 2 жыл бұрын
New sub here and nee ro RC! I have a gas DBXL 2.0. Just ordered some Vitavon goodies because you! Im in NE Florida, your track is cool. Where you located? Thanks again!
@ExocagedRC 2 жыл бұрын
Oh man awesome! I’ve got Vitavon DBXLE parts in stock. I’m in Middleburg
@teamsargentrc6399 3 жыл бұрын
Beautiful job very professional Job!🤜🤛👊👍
@febrihudono Ай бұрын
Is It = centre diff lock? And open diff lock in the front & rear?
@old-rcplane-phart 2 жыл бұрын
Up at 355am😳
@ruger1420 2 жыл бұрын
Pretty pimp ryft. I was pretty close to throwing mine in the trash. Like reeeally close Broke axles front. . Center diff gears striped. Twice. But . Mines stock except I bought the locker spool for the center diff. Much better. Don’t have the cash for the fancy vitavon gear. Works good though. Just can’t bash it to much. Lol.
@vbspeed7571 2 жыл бұрын
Do u sell the stock parts if so would love to buy
@Cooldibs 2 жыл бұрын
How much did all that add up to?
@frankbunton5505 Жыл бұрын
Help! I'm having issues with the stock springs. Just finished building the RBX10 kit and mention that this shock springs bend when under tension. Is there a cheap way to fix this? Thx!!!
@00gavin 2 жыл бұрын
Great build! How are you using the kinetic tow strap?
@ExocagedRC 2 жыл бұрын
It’s just set to help limit the front end from unloading on climbs
@NCMOUNTAINSbackyardRC 2 жыл бұрын
O yea sweeet 👍
@justinvess9667 5 ай бұрын
Do you think the 2700kv is better then the 2100
@chrisevans3051 2 жыл бұрын
How often you break stock driveshafts? On the fence about switching to aftermarket
@ExocagedRC 2 жыл бұрын
I havent, but I do have new Vitavon shafts in stock, email me at Exocagrdrc@yahoo.com if you're interested.
@HEATRACER24 2 жыл бұрын
What sway bars can you recommend for the Ryft? I just got one yesterday and are the Axial made sway bars the same front and back?
@geoffreyhudson2975 Жыл бұрын
How much did the whole build in parts cost
@RickRoxwell 2 жыл бұрын
What foams are you running in that
@davesadowski568 2 жыл бұрын
Any info on the bungee limit straps? Lengths and where to get them at?
@jakethole 2 жыл бұрын
All right I really want to know cost total in all this
@sgtcrusher66 Жыл бұрын
have you ever tried the bang good axles ? or treal ?
@ExocagedRC Жыл бұрын
yeah Treal makes good stuff, I won't mess with bangood ever again..
@mikep.9338 3 жыл бұрын
Is that lithium grease?
@ExocagedRC 3 жыл бұрын
Yeah
@darthbaker820 2 жыл бұрын
Going to build my rigs the same way. How much do you estimate is in this rig?
@ExocagedRC 2 жыл бұрын
I’d guess around 3k. I have a bunch of Vitavon in stock right now.
@faubertshawn6319 2 жыл бұрын
Where did you get you usd sticky???
@ExocagedRC 2 жыл бұрын
Gotta watch their site and stay up to date on there fb page and get em when you can.
@THEBILLYCLAUS 2 жыл бұрын
Where is the parts list he mentioned
@juliosantiago7735 2 жыл бұрын
✌🏼😜💪
@whistlinlipo 2 жыл бұрын
Dang, what’s left of the original Ryft lol
@ExocagedRC 2 жыл бұрын
Some gears and the cage. 😂😂
@chrisryder4709 2 жыл бұрын
USD STICKIES ,,,. EEEEEYAAAAAEEEEE. !! I LOVE MY STICKIES I GOT MOST OF THAT STUFF ON MY RYFT , tires make the whole thing make sense 🤣
@rc-daily 3 жыл бұрын
This is pretty close to my build
@ExocagedRC 3 жыл бұрын
This thing will be epic!!
@justinhopkins2203 Жыл бұрын
He could probably build a stock ryft with all the parts you replaced
@geoffreyhudson2975 Жыл бұрын
And what is left of factory parts lol
@endosrc 2 жыл бұрын
Can u do this to an smt10 I need a part guide
@ExocagedRC 2 жыл бұрын
Well you can put ryft axles into an smt 10. Then you’ll be working with Vanquish for the links and the chassis stuff can be whatever you want.
@endosrc 2 жыл бұрын
@@ExocagedRC I thought ryft link locations didn’t line up
@endosrc 2 жыл бұрын
@@ExocagedRC would a treal ryft axle fit on a freestyle rc zrd cage
@hotheadedfilmshhf6734 2 жыл бұрын
At this point just buy the parts and electronics cause you replaced the whole bouncer😂😂
@silentjde 2 жыл бұрын
I guess there’s no point in buying a Rfyt Id you plan on a build like this, just get the cage.
@ExocagedRC 2 жыл бұрын
Well the kit would work. The small parts can make builds like this a pain when you don’t have them.
@Livlifetaistdeth 2 жыл бұрын
Ballpark the total cost so I know how much plasma I have to sell to build that bad boy.
@cheagle464 2 жыл бұрын
Sell a leg, you should have enough.
@stevenpeters2593 2 жыл бұрын
Who cares about those damn weight scale
@ExocagedRC 2 жыл бұрын
It’s cool for tech and tuning.
@rolandomota6382 2 жыл бұрын
😶😒 broke, then seeing this vid
@ExocagedRC 2 жыл бұрын
Being broke sucks. But yeah this was not a cheap build at all.
@rolandomota6382 2 жыл бұрын
@@ExocagedRC i want to do this to both of mine but keep one rock bouncer style, and get the kit as well 😎
@beleg1437 2 жыл бұрын
Shit video for you not telling us what the Holmes motor is!
@ExocagedRC 2 жыл бұрын
You know what’s even worse? You not looking at the description to see what it is before posting a stupid comment. That’s what’s worse.
RCSparks Studio
Рет қаралды 65 М.
Exocaged RC
Рет қаралды 40 М.