Thanks Joe. These videos are invaluable for making decisions. As another person has said, "200T for removals and the smaller ones for pruning". Tendonitis is what every climber will want to avoid and the lighter saws help delay that. 3lbs may seem indifferent, but it's the repetitive three pounds of six plus hours of climbing 5 days a week for a climbers career that necessitates practical decision making.

I have both of those saws. Both I have ported and are strong. Pruning 2511, removals 200t. Great video as always!!

Usually I go with the lightest saw I can get by with.

The 2511T is a joy to climb with. With a muffler mod, I don't find that it lacks power in anything you'd use it for. Little sucker rips. No desire to own a 200T.

Hey Thanks Joe I appreciate this video a lot. Don't know if you remember me asking you to dyno a stock ms200t and you replied how hard it is to find a stock one. Guessing this would mean my ported and decked 200t must have about 3hp. Thanks for listening to your subscribers requests and please keep the awesome videos coming. I check everyday hoping you've released another one. All the best

I have a ported echo 355t. I LOVE IT

Always informative videos to aid in choice of saw. Great job Joe!

I can't wait to get my 2511 ported❤❤

I really appreciate the response I love my 361s

Damn it, nobody gives the 355T any love. The power is so much better over the 2511. Thx for the test Joseph👍🏻

Great video 200ts are strong working saws

Thanks for the videos and inspiration. I have a couple 2511t cylinders coming. They are cheap enough that I am going to start playing around with the grinder with my older boy.

Nice work Joe! I enjoy your videos.

I run ported 200t, ported 150 and slightly modded 2511. I usually reach for the 150 unless the branches get over 3”. The stock 2511 is terrible though. It really needs muffler and timing advance at a minimum.

I have a 200t sweet saw.

Thank you!!

I use my 2511t for removals as much as i can if its bigger wood then i go to the 355t then the 620 or 455 rancher

Nice video Joe!!

Cool comparison joe. Any saw put on your dyno is an awesome video.

Thanks again joe

As a no-trim climber fuel capacity is key - if I can delimb, drop the top and drop a couple rounds to where the bar starts getting too small that's a big win. I go from a 200t 14" to a 362 25" when climbing. The 2511 ported would probably work too, but I'd jump to a 3/4 wrap 261 with an 18" bar when out of fuel on the top handle.

A piped 2511t fits my needs. Soon I'll receive an Oregon Nano kit to try the little 0.325 / 0.043 NK chain. I have no need to pack around 3.5# more of the 200t.

Love the channel. A cool video would be to compare max flow air filter kits vs stock filter

Yeah man I would rather have the liter saw in my hands for sure, but that's me.

For 10% more power when both ported over the echo, hell no its not worth getting a 200/201 over this feather saw. Like you said, the echo 2511 is in his own class.

I’d love to get me a2511. It would have to be my go to for limbing and climbing

I think a 355T would be a much better competitor to the 200T

200t for me without a doubt 👍

Interesting video! Best regards!🤝🤝🤝

Love these videosJoe!!

Can't possibly go wrong with either one

I have 2 of the 2511t saws. I would take the less rpm’s for half the weight. It’s so well balanced and just goes all day long. I have a 12 inch and a 14 inch bars on them, I’m thinking of going to the panther 1/4 pitch bar. Anyone has experience with how the 2511t works with a 1/4 pitch?

👍

I wonder what a ms194t muffler modded and timed advanced would compare to a 200t

You know what we want to see!!!

2511 is a sporty little saw! But it will never replace the 200t, in my humble opinion….. thanks for sharing buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏

How can a port job bring such a substantial power gain? Why would Echo not have made the saw like that from new? I am impressed.

Better to compare the 355 with the 200t. About the same displacement. I think the 355 is still a little lighter.

Can you do a ripsaw 2511T dyno? I’m curious if that ripsaw 2511T will break 2hp

What a bargain the 2511 is!

do you know where I can ship my echo saws for porting?

I have an old 330t it dont have a ton of power but starts every single time

Would be curious to see where a modded ms194 would fall in this realm? I have a MM and timing advance on it that pulls right with a 201t...

Thanks Joe been waiting for this!👍

Hey Joe! I was wondering, could you do a video on muffler mods for 372xp OE's? I'd really be curious on the different styles and their power advantage over a stock one.

Joe, what is the starting point for the carburetor on the 2511 with limiter caps removed?

Anybody you recommend that does porting I'd like to get my 2511 hopped up

Do the 200/201s eat rings? I have 2 with low compression and there is little to no scoring but the cross hashing is gone

I wonder how 338 or 540 would be in this comparison greetings

I have the 2511T that is stock, the 355T that is stock, 201T that is stock, and recently purchased the battery 161T. I prefer the 161T over the 2511T and the 201T over the 355T. I have 3 other Echo saws that are not top handle. The only saw I do not like is the 2511T. I really think I need it ported, muffler mod, and the 1/4 inch bar and chain. Not sure if i want to spend the time and money on it.

200t is discontinued? Pre epa crackdown?? Can’t find any around me…. More fair comparison would be current production models from husky, stihl and echo…

I've seen one fella running smaller chain and 20-in bars on them have you seen that

Hi Joe, Do you port saws if I would ship one to you? Or do you sell any that are already ported?

Hey where do I find an expansion pipe for my MS 361

I have to have both!!! These saws and the 201 house did for me are my bread and butter. Those wcs spikes are the way to go. Those extra 3 pounds you feel after 8 hours that’s for sure!

I will climb with a 660 in big wood so I find the 201t light and don't feel the 2511 uts sweet

Is that a dynomite dyno?

The only reason the 2511 will be king is because they don't make the 200 anymore. Oh and it went to Jenny Craig...😆

Evaristo

🇺🇸Joe for President🇺🇸

I’ll take the 200 T second to nothing

Joe I really like how informative ur vids are best in the business I gonna. Come see u soon Dyno my Miller mod dolmar 7910 n have u mod my echo 7310 luv the Dyno to prove gains