How to Underglaze with a Sponge - Pottery Glazing Tips Tools and Techniques

Рет қаралды 38,718

Күн бұрын

Underglazing With a Sponge is very easy. Follow along and Soak Up some knowledge, and 🎯 Click the Link For the complete list of supplies potterycrafters.com/sponge-un... 👇 SHOW MORE SECTION 👇
-------------------------------------------------------------------------------------------------------------------------------------------------------
❓ Question
Have any Questions, Comments, or even suggestions for Future Videos
Feel Free to Post them in the Comments Section.
Don't forget to 👍 and Subscribe! Turn on Notifications (🔔)
-------------------------------------------------------------------------------------------------------------------------------------------------------
👉 READ - Sponge Glazing | Tips Tools And Ideas
potterycrafters.com/sponge-gl...
👉 READ - 27 Glazing Tips for Beginners
potterycrafters.com/glazing-p...
👉 Pottery Crafters
potterycrafters.com/
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Click the Link For the complete list of supplies
potterycrafters.com/sponge-un... 🎯
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools In My Studio 🔷
Hand Tools
potterycrafters.com/recommend...
Glazes
potterycrafters.com/recommend...
Brushes
potterycrafters.com/recommend...
Favorite Clays
potterycrafters.com/pottery-c...
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to my website potterycrafters.com and some are
affiliate links where I'll earn a small commission if you make a purchase
at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
All Music potterycrafters.com/MUSIC is used in strict compliance with the appropriate permissions and licenses required All Music is Licensed through artlist.io/ and in accordance with the KZfaq Partner Program, Community guidelines & KZfaq terms of service.
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Click the Link For the complete list of supplies
potterycrafters.com/sponge-un... 🎯
-------------------------------------------------------------------------------------------------------------------------------------------------------

Пікірлер: 84

@TerriMcCaul 3 жыл бұрын

Thanks so much for this delightful video. I have been working with underglazes a lot recently but never thought to use sponges!

@PotteryCrafters 3 жыл бұрын

That is Wonderful Terri.😍 Glad it was helpful! Did you see the Ombre effect one? kzfaq.info/get/bejne/prSkra6E0LqVZmw.html This one is done with underglaze also and stickers to give you more fun Ideas 😊

@susanpapadopoulos3843 3 жыл бұрын

Nicely done video. Very organized and clear instructions with clear videos. Really appreciate how concise your information is. Not a lot of wasted time getting to the point. Excellent quality. Thank you!!!

@PotteryCrafters 3 жыл бұрын

Thank you Susan 😍 I appreciate that!

@65kaki 3 жыл бұрын

Great tips, especially for beginners. Implemented very clearly and understandably! Thank you so much! 🙂👍

@PotteryCrafters 3 жыл бұрын

Thank you K😊 So glad it was helpful!💖

@unityflo5956 3 жыл бұрын

it was great.thank u sooooooo much.thanks for smiling all the time.i love your energy.

@PotteryCrafters 3 жыл бұрын

You are so welcome💖😊 Hope I could give you some cool ideas to sponge glaze. It is fun to do. Did you see the Ombre one with stickers? You may get more decorating ideas with that one also. 😍 Thanks for watching

@vickivanriel3082 4 жыл бұрын

They look awesome. Love the green design

@PotteryCrafters 4 жыл бұрын

Thank you Vicki😍

@forestgrace9513 3 жыл бұрын

I love this so much. I’m going to try this on my new pieces. Good to know it doesnt need to be fired first.

@PotteryCrafters 3 жыл бұрын

That's Wonderful! 😍 So glad I could give you some fun sponge glazing Ideas. I think you will like the next video that will be out soon. I go through the 7 stages of clay and some of the things you do at each stage. Happy Glazing 😊

@KatAtkinson 4 жыл бұрын

Those are really cool patterns! I will have to try this once I get my kiln set up

@PotteryCrafters 4 жыл бұрын

That great I'll bet you can come up with some cool sponge patterns too.👍 It's fun to decorate your pottery 😍

@saundragrenard3789 4 жыл бұрын

Wonderful once again❣️

@PotteryCrafters 4 жыл бұрын

Thank you so much Saundra 😀

@carolynmurray2501 3 жыл бұрын

Beautiful.. can’t wait to try this technique..😊

@PotteryCrafters 3 жыл бұрын

Glad I could give you some cool decorating Ideas 😍

@akshatsharma31187 2 жыл бұрын

Very organized teaching lesson. Thanku for your helpful tips.

@PotteryCrafters 2 жыл бұрын

Glad it was helpful! Thank you 😊

@cpetati1 4 жыл бұрын

Thank you!

@PotteryCrafters 4 жыл бұрын

You're welcome Carla 😃

@lisalawn1111 Жыл бұрын

awesome-- THANKS!!!!

@PotteryCrafters Жыл бұрын

Thank you Lisa

@neuzeteribeiro 3 жыл бұрын

Linda suas peças / obrigada por compartilhar 🙏

@PotteryCrafters 3 жыл бұрын

Muito obrigado.😊

@KellyOngkowidjojo 3 жыл бұрын

Hi Marie! Thank you for the awesome video! I’m wondering if you can do one where the glaze result looks like enamel? I’ve been wanting to create that look but struggling to do so. Thank you!!

@PotteryCrafters 3 жыл бұрын

Thank you very much 😍 In the last few minutes of the video I apply a clear glaze and put them in the kiln that gives them an enamel look. 😊

@kupcads6470 4 жыл бұрын

Hi, the first one is also very nice, but I liked the second one very very much.

@PotteryCrafters 4 жыл бұрын

Thank you so much Kiran😊

@bozacerne7540 3 жыл бұрын

Beautiful.

@PotteryCrafters 3 жыл бұрын

Thank you!😍

@alexismassart2325 3 жыл бұрын

She's the Bob Ross of pottery- awesome!

@PotteryCrafters 3 жыл бұрын

Thank you Alexis. 💖

@lindaseguin9039 8 ай бұрын

Great videos. So easy to follow and very descriptive. Should the sponges be damp before applying the underglaze?

@PotteryCrafters 8 ай бұрын

Thank you Linda, Good question. Yes damp 😊

@sarayousefi7731 3 жыл бұрын

hi! thank you !!! Its very nice video. I'm from Iran. we don't have your colors we just have powders that called stain.we mix stain with water and glaze powder and CMC glue.

@PotteryCrafters 3 жыл бұрын

You're welcome, Sara. Glad I could give you some decorating ideas. 😍 Did you see my how to make colored clay and slip videos made with stains? You may like those also.😊 خوش اومدی سارا خوشحالم که می توانم چند ایده تزئین به شما بدهم. 😍 آیا نحوه ساخت خاک رس رنگی و فیلم های لغزنده ساخته شده با لکه را مشاهده کردید؟ ممکن است شما هم از آن ها خوشتان بیاید😊

@mkamb2159 Жыл бұрын

Hi Marie! Thank you so much for your amazing video. How do you get the colours to pop without adding 3 layers of the same brush? I use TS white ceramic and I always need to put on 3 layers for my colours to come through. Thank you!

@PotteryCrafters Жыл бұрын

You’re welcome 😊 I rarely apply 2 coats of underglaze. It may be the brand of underglaze, the thickness of the underglaze, or the amount applied. I also only apply 2 coats of clear glaze. If you apply clear glaze too thick, you get a milky look. I hope this helps.

@mkamb2159 Жыл бұрын

@@PotteryCrafters very much! God bless and have a great day ahead!

@PotteryCrafters Жыл бұрын

Thank you Maryam.

@michaelmagliato1061 2 жыл бұрын

Thank you for helping. My question is can a once glazed dish or ready fired be reglazed again? I want to add more color to the dish with overgrazed. Also how will I know you replied? Do I come back to this section?

@PotteryCrafters 2 жыл бұрын

You are welcome, Michael. Yes, you can. This article will help potterycrafters.com/can-you-reglaze-pottery/ Some comments get notified or you can just recheck the comment 😊 Happy glazing 👍

@neuzeteribeiro 3 жыл бұрын

Olá / gostaria de solicitar que permita a tradução para português ( Brasil) adoro suas aulas

@PotteryCrafters 3 жыл бұрын

Muito obrigado. Estou muito feliz que os vídeos sejam úteis. Eu investigarei

@marymacdonald3506 2 жыл бұрын

I use Laguna bmix clay. Can I use this for underglazing and what cone do I fire to? Totally new to underglazing. Thanks

@PotteryCrafters 2 жыл бұрын

Good question Mary. Yes, you can! I have used Laguna b-mix. Bisqued fired, then applied my underglaze and clear glaze then fired to Cone 5 - 2167℉ (1186℃) This post may also help. Here is the link for you. potterycrafters.com/underglazing-pottery/ Happy glazing 👍😊

@neuzeteribeiro 3 жыл бұрын

Linda as peças , 🙏por favor muda no KZfaq para que possa assistir em português

@PotteryCrafters 3 жыл бұрын

Obrigado vou ver o que posso fazer

@t520721 3 жыл бұрын

How did you get the rim color on the bowl? It looks like a gold or yellow shade.

@PotteryCrafters 3 жыл бұрын

Thanks for asking. That's the Spectrum yellow underglaze. I only applied one coat with the sponge. 😊

@maibeanoe8067 3 жыл бұрын

Hola .colocas primero esmalte blanco sobre bizcocho luego esponjado con pigmento y por último el glaseado.todo en el bizcocho crudo??

@PotteryCrafters 3 жыл бұрын

Hola 😊 Lo paso una esponja con el vidriado. Luego coloque el esmalte transparente para sellar la arcilla. Es un patrón genial

@user-hx4jz1td5w 2 жыл бұрын

Прекрасно!!!!

@PotteryCrafters 2 жыл бұрын

Спасибо

@ronaldlake6305 Жыл бұрын

What would happen or what would it look like if you did a solid bright red glaze first and then did a bright or dark blue sponge glaze with a gloss clear glaze for the finish?

@PotteryCrafters Жыл бұрын

Good question Ronald. I think it would look cool. I have an underglaze layering article that may be helpful. potterycrafters.com/can-you-layer-underglaze/ 😊👍

@peterlopatin2761 2 жыл бұрын

My studio fires everything at Cone 10 gas reduction. Can you recommend some high fire underglazes that won't burn out at Cone 10?

@PotteryCrafters 2 жыл бұрын

Very good question Peter. When my studio fired Cone 10 gas reduction I use Spectrum Underglazes. The only color that turned out darker than I wanted was spring green. The other colors like blue, red, and yellow turned out great 😊👍

@marymacdonald3506 Жыл бұрын

Can underglaze pieces touch in bisque firing?

@PotteryCrafters Жыл бұрын

Hi Mary . That is a very good question. No underglaze pieces can not touch other pottery because the the underglaze will transfer to the other piece it is touching.

@brendawiles7459 4 жыл бұрын

What brand of mixer do you recommend? I purchased one and it was not very powerful.

@PotteryCrafters 4 жыл бұрын

I use the GRUNEN WOLKEN Milk Frother, It works great for a small amount of glaze and underglaze, but mine is also not super powerful😊

@brendawiles7459 4 жыл бұрын

Thanks for the quick response and all your wonderful videos.

@PotteryCrafters 4 жыл бұрын

Your welcome Brenda, thanks for your support.😍

@heididerksen8227 Жыл бұрын

Hello Marie I was wondering if you can help me figure something out I made a pottery piece with writing on it and I want to underglaze and wipe it back and put a glaze over it. Wondering do I need to wax resist the lettering or can I leave it

@PotteryCrafters Жыл бұрын

Very good question. You don't need to use wax resist if you are using a transparent glaze. If you are using a glaze that would cover up your writing then you would need wax resist, but your writing would not have a matte or glossy finish over it if you use wax resist.

@heididerksen8227 Жыл бұрын

@@PotteryCrafters thank you

@heididerksen8227 Жыл бұрын

@@PotteryCrafters ok another question for the same project can I use any glaze that brakes over texture and the lettering will go darker? I just want the letters to stand out,with out it coming out later. I want to underglaze and wipe back but I want the letters the same as the glaze shiny or do I not want that. Or will it matter if the letters are underglazed and not shiny. Trying to decide.

@PotteryCrafters Жыл бұрын

You can do it with a celadon glaze, so you still get color, and your lettering shows through. Yes, you can also use a glaze that breaks, but the letters have to be deep and wide enough for the glaze to break. Take iron luster, for example. You get two different colors. One from the thicker layers and another from thinner layers. Be careful because the glaze can run and not so the letters as well. Or you can apply film resist to your lettering. glaze it. Let it dry, then peel off the film resist and apply clear glaze to the lettering. Here is the link for you to check it out geni.us/DAJu3Ns 😊

@heididerksen8227 Жыл бұрын

@@PotteryCrafters thanks so much truly appreciate all your help.

@jeanniepratt1326 11 ай бұрын

I know this is an older video but it appears you applied only one coat of underglaze? I was under the impression it should be applied 3 times? Can you tell me what the correct application would be? Thank you!!!!

@PotteryCrafters 11 ай бұрын

Hi Jeannie. Yes, I usually apply only 1 coat. Sometimes 2. It all depends on the look you want to create. I was also taught to 3 coats, which is subjective to the art we want to create.

@jeanniepratt1326 11 ай бұрын

@@PotteryCrafters thank you for your help!

@ingriddeguarda9022 2 жыл бұрын

Sous-titres en français svp merci 🙏

@PotteryCrafters 2 жыл бұрын

J'ai eu des demandes pour de nombreuses langues différentes et je ne sais pas comment faire. Je suis meilleur en poterie qu'en utilisant Internet. Désolé. Merci d'avoir regardé. 😊

@carolbanach2932 2 жыл бұрын

Have there been any accidents with the clear glaze dripping and sticking to the kiln?

@PotteryCrafters 2 жыл бұрын

Good question Carol. No, actually I haven't with clear glaze because I only need 2 coats and clear glaze is pretty stable and doesn't run. 😊

@AlvaSudden 2 жыл бұрын

She looks like so much fun, like her class would involve wine and cookies.

@PotteryCrafters 2 жыл бұрын

Sure is. If you haven't seen it yet here is a Sponge Glazing with The Ombre Effect video. Here is the link kzfaq.info/get/bejne/prSkra6E0LqVZmw.html 😊