The "2 barrel" is because it is a stratocharged saw to meet EPA emissions. Commonly refered to a strat saw. Yes , it is a crap cheap design. The cockroach of saws.
@ZombieDaveAZ3 жыл бұрын
Larry, thanks so much for informing me about the stratocharge engine. I never heard of it before or just overlooked it. I just spent the last 2 hours researching it. Very interesting to say the least. Thanks again and I appreciate you taking the time to comment. I learned something today. Stay safe. 🍺😷👍
@rickforsty94103 жыл бұрын
@@ZombieDaveAZ think your spot on ! I would also would look into changing filter media ! good presenttation
@dangilbertville25773 жыл бұрын
@Antonio Jaxton SCAM
@lukez17292 жыл бұрын
Yeah these 42cc saws are complete.juck!
@thenoneckpeoplerepresentat807411 ай бұрын
Cockroach of saws is the perfect description 😂.
@detrimundo2 жыл бұрын
I'm just going to repeat what hundreds before me said. 1. Thank you. 2. You're a great communicator. 3. Excellent catch on the design flaw. 4. I hate the new design on gas containers but I now have a new appreciation.
@ZombieDaveAZ2 жыл бұрын
I love starting my day with a kind comment. I hope you have a great day and stay safe my friend.
@aruntyagi4767 Жыл бұрын
I was looking for a lightweight blower for my deck. kzfaq.infoUgkxgioZQl3J5wPGAeDINzbieKbT5qomSEx3 There are some huge trees around my house and the leaves and pods drop all over my deck. Having to move furniture around to sweep has become too big a chore. This blower was the answer. It is light enough for this 70yr old lady and powerful enough to blow all the tree droppings off my rather large deck. Thank you B&D. Be aware the cord is not included. I use a 3 prong outdoor cord 25' cord for my 12' x 20' deck. The cord retainer works very well, but don't try to pass the plug through it. That is NOT how it works. You just have to loop the cord and it works great. One of my best purchases. Very happy.
@dougsimon97885 жыл бұрын
Just want to thank you,,, great demonstration! I have a RYOBI that was giving me the problems you described. I changed the spark plug, then the fuel, then the air filter, and last the gas filter and still no luck. Cut a wider opening over the air filter cover... and finally.. The saw is back in action....
@ZombieDaveAZ5 жыл бұрын
Thank you Doug.
@ellasweet23934 жыл бұрын
Man, your solution works PERFECT! I have the poulan p3314 saw. I had the cover off to get at the low/high jets and idle screw to set the mixture and had it running great. I noticed the black area on the lower carb jet. Put the cover on the carb, installed the cover and the damn thing WOULD NOT restart. Choked, not choked. then I found your solution. took off the carb cover and put 2 3/4" holes on either side of the top jet, reassembled and bada-bing, fired right up.
@albert395203 жыл бұрын
Wow Oh Wow! I have a Chainsaw again! I bought the 3314 after my Wild Thing that was just worn out after Katrina cleanup (the Forrest came down on us) and expected it to work as great as my Poulan Wild Thing 2375. Alas no. The flooding after you use it once was unfixable by local techs until I watched your video. My 3314 didn’t have a separate filter cover rather a gridded plastic cover that SHOULD have allowed airflow. Prehaps there isn’t sufficient air coming into chamber at all? What do I have to lose? I decided to drill a very small vent hole in front of the upper filter area. 1/8” bit Voile’. It starts every time. It’s now as effortless as my old Wild Thing. Thank you for the clue. So great to have it working.
@ZombieDaveAZ3 жыл бұрын
No more coffee and researching youtube. Time to go to work! Stay safe Allyson. 😷👍🍺
@ClarenceLloyd4 жыл бұрын
Wow! I've been cranking my Poulan till exhausted. When cold, it always started up as per starting instructions. But once warmed up, it just never wanted to start. Thanks so very much. I'm fixing it now, and I know ahead of time, it will work!! God bless you sir!!
@ItsAlive1113 жыл бұрын
Did this fix it?
@feralcrafter70433 жыл бұрын
(Dark Humor) I'm worried that it worked and he got so excited he had an accident ... RIP Clarence Lloyd!
@toddmorgan82083 жыл бұрын
setting the plug gap to 0.030 " fixed my problem, today... a you tube guy said the gap shrinks when gets hot, and just need to open it up a little... (ran for 4 min, then died & no start...) Over the years, I have done various things... replaced gas, carbs, fuel lines, filters, & even a gas cap... I do something every 1 or 2 years... it always, eventually, will get working again... but this was the fastest fix I've seen. I have yet to try cutting a hole(s) in the air filter cover....
@kevinhouston42734 жыл бұрын
Gave my pastor a Poulon. He complained later that he couldn't get it started. I told him that sometimes that chainsaw needs a good cussin. He told me he cussing days were long gone. I told him "Keep pulling preacher. It'll come back to you." Good video my friend. Good explanation and solution. My kind of 'making it work'.
@ZombieDaveAZ4 жыл бұрын
That made me laff so hard. Thanks👍😉
@Aronyeakey673 жыл бұрын
Going to try this tomorrow, I’ve watched a ton a video on how to fix this issue and this is the first I’ve heard of this trick, if it works I will update this, and I will be very very grateful for you because that will be amazing!! UPDATE: holy crap!!! It worked!! I could not get the dang thing to idle nor could I get the chance to even try to tune the carb because it would shut off and then after I tried I couldn’t even come close to getting it started again, but after drilling 3 small holes... GAME CHANGER!! The dang thing started up great, I was able to get the carb and idle tuned to perfection, great trigger response, I let it run until it was super hot shut it off and normally it would be game over until it cooled but not anymore starts after one pull just put it at half choke and pull starts up great!! Thank you so much!!!!!!!!
@ZombieDaveAZ3 жыл бұрын
Happy for you. We saved another one from the dump. 😂
@Aronyeakey673 жыл бұрын
@@ZombieDaveAZ one month later and still runs like a champ!! One pull start!! How is this not more well known!!!
@ZombieDaveAZ3 жыл бұрын
@@Aronyeakey67 I don't have an answer brother. Thanks for the kind words. Greatly appreciated 👍🍺
@FRANKSBESEK4 жыл бұрын
Excellent descriptive presentation on The Why and the Wherefore Dave. I cannot tell you just how much I enjoyed this video. Pure genius in understanding the stupidity of the engineering shortfall in the air cleaner system. I am going right down to drill my hole. Many thanks. Stay well and safe. G'day to you.
@ZombieDaveAZ4 жыл бұрын
Thank You Frank. I hope it works for you too.
@johmu54664 жыл бұрын
Excellent demo of venturi & also of effects of water in fuel in fuel tanks.... Makes it easy to understand & remember... Thanks much..!! ...also very helpful info on 'venting' the air cleaner covers by putting in a few extra well-placed holes...
@ZombieDaveAZ4 жыл бұрын
Thank you Joh.
@madgesonenterprisesltd62283 жыл бұрын
Your comments are absolutely wonderful. You explain in really basic way what is going on with small engines. Educational and really entertaining. Brilliant thank you.Keep producing these.
@ZombieDaveAZ3 жыл бұрын
Thank you so much. Please stay safe. 🍺😷👍
@michaelmclaughlin27293 жыл бұрын
@@ZombieDaveAZ Keep Safe and Covid Free Dave
@davidhoward55867 жыл бұрын
Very well presented and a great understanding of how an internal combustion engine works. As most problems if not all problems with intermittent use of any two or four stoke engine is with the fuel delivery system i.e. The carburetor from water,rotten fuel lines,blocked gas filter or gummed up carburetor or in the case of small two stroke engine, the diaphragms inside the carburetor.
@ZombieDaveAZ7 жыл бұрын
David Howard Thank you David. I hope you'll subscribe and check out my other videos. Always look forward to comments.👍
@jasonbeal79326 жыл бұрын
This fixed my problem!! I replaced the spark plug and cut a big square in that filter cover and it runs like a freakin charm! After a carb adjustment, it runs well, idles well, and starts after its been running a while (after its hot) Thanks for the help!
@garydyork61906 жыл бұрын
I had given up on fixing my Poulan PRO for years. Every Thing I tried would not work, Till Today. I drilled the holes in the cover, then tuned the carburetor one last time. It is purring like a Buss Saw should now! Thank you so very much for posting that fix.
@ZombieDaveAZ6 жыл бұрын
GARY D YORK Hey Gary, Thanks for taking the time to comment and I'm really happy it worked out for you. You are the reason I do this. Thanks again.
@vt6spd4 жыл бұрын
I cannot wait to go home and cut that hole in the filter cover! I have been searching and searching...I cleaned carbs, cleaned saw....new fuel. No change. I will try this out! My saw is about 8 years, 42cc saw. Black and Yellow. Works great the first time it starts, but don't put it down or let it idle...it'll be til the next day when you can start it again. Thank you for the thorough explanation. Great video
@ZombieDaveAZ4 жыл бұрын
Good luck James.
@wolfmanrebel8744 жыл бұрын
I have a 3314 like your green one I got it recently for pruning jobs while I wait on Amazon dragging ass to send me my parts to restore my Husqvarna and that damn thing dies about 15 seconds after you let off the throttle to set it down and it's a pain in the ass to start I'm going to try this, my Husqvarna is an early 90's model 41 air injection and it always starts withing 4 pulls and the engine runs perfect just the oiler broke,clutch is worn out ,bar and chain are worn real bad and oiler tubes need changed I can't wait to have it in the field again I though the little 14 inch poulan for what I gave for it would work well for my wife to trim her fruit trees with but I'm the only one that can get it started so kinda defeated the purpose of buying it
@freddiesmith66685 жыл бұрын
I did this to the breather cover on mine and it works great. It will idle now where it never would before and much easier to start.
@brotherlove1004 жыл бұрын
Hey, I just wanted to throw my 2c in here. I followed your lead, your discovery and made one more. You could very well be right about the filter cover suffocating it. However, take a good look at the saw cover! That air intake ares is completely sealed off. They even went so far as to add in a rubber gasket b/w the area and the engine bay. Look at the inside of the cover on your bench. Totally walled in. I cannot see where air can get in except by the carb adjustment area and by the throttle cable. So I think you're correct bout chasing the airflow, but I took it one step further and am going to cut holes in the cover right below the "start guide" sticker and glue a screen over them to keep the chunks out.
@albertcassler87634 жыл бұрын
You are truly a mechanic in the full sence of the word...thanks for showing this modification, I'm impressed
@ZombieDaveAZ4 жыл бұрын
You might like this one brother. kzfaq.info/get/bejne/Z9emi7te3Ki6foU.html
@edwardwuntsch10214 жыл бұрын
I did the Hole trick and it actually worked. It went from choking out at high rpm to actually running! Thanks for the video!
@ZombieDaveAZ4 жыл бұрын
Happy to help Ed
@DanR4116 жыл бұрын
Thanks so much for this tip. I had a blister on my hand from trying to start a new Poulan. I cut a small hole in that filter cap and the chainsaw cranked on the first pull.
@ronhanish5 жыл бұрын
same problem on mine, im gonna try this
@alexandrevaliquette19415 жыл бұрын
I would suggest a 5$ donnation to your Patreon account for every happy camper that saved their saw with your tips! Ok, you don't have a Patreon account and you are only doing this KZfaq for the passion of helping people making a better world! That is inspiring! I wish you a great day and be safe! Alex from Québec, Canada
@GreenPowerFarm5 жыл бұрын
I just want to say thank you! My chainsaw would never start warm & didn’t idle...I’d cut down a few branches set it down & it would die...then I would try to pull it like 29 times and nothing......AFTER doing you hole cut out method this chain saw runs better than ever!!...idles perfect!!..starts 1st pull with hot engine!!!...so thank you kindly brother!!...🙏
@ZombieDaveAZ5 жыл бұрын
You are most welcome. I subbed you. Cool channel. Thanks for the positive comment too.👍
@ZombieDaveAZ5 жыл бұрын
You are most welcome. I subbed you. Cool channel. Thanks for the positive comment too.👍
@Rick-be8pw4 жыл бұрын
@@ZombieDaveAZ I subbed you 2.
@scottfirman3 жыл бұрын
Here in Northern Michigan, you can dump gas in a jar, come back in a half hour and actually see water forming in the gas. It becomes foggy and after a while, you can even tilt the jar and see water pooled up at the bottom of the jar. The best thing to do is keep your can tightly sealed and never use the last 1/3 of the fuel in your gas can. It will always have water at the bottom. Sometimes you need to think outside the box. I had a lawn mower that never worked right. I ended up putting a fender washer over the carburetor hole between the air filter and that cured its problem. By doing that, it restricted air flow a bit and improved performance and ran 100% better. I have also had to modify the air filter box on weed wackers, same issue!
@carlosnegrin2774 жыл бұрын
After trying to start my Chainsaw Poland several times, for several days, I decided to call a professional, but at this time because the COVID-19 they are closed, so I decided to see if I was able to fix and after making a hole in the filter cover, my chainsaw start right away, great advice, because my other option could be replace the filter.
@CascadeGriz7 жыл бұрын
After several frustrating days trying to get mt Poulan Wild Thing running I tried your fix, shazzam I now have a working chain saw. Thanks! Great fix and makes perfect sense.
@ZombieDaveAZ7 жыл бұрын
Chuck Holton. Thanks Chuck, just trying to share what I know,errr what I THINK I know. One of these days I will show and share a true story that happened to me with a echo hedge trimmer. humbled me deeply. a lesson I taught myself and will never forget, stay tuned for that one and Thanks so much for your comment. 👍
@martystevens39697 жыл бұрын
Chuck Holton Usually the Wild thing problem is the carb.
@ZombieDaveAZ7 жыл бұрын
Carl I just put out a new carb clean video. 100%.
@martystevens83576 жыл бұрын
Chuck Holton Replace the carb. or the diaphragm 1st. Adjust the mixture using the spline tool.
@CascadeGriz6 жыл бұрын
It has run the rest of the summer and early fall perfectly.
@josedejesus61854 жыл бұрын
Great instructional video! I have a Poulan and it is very aggravating to start, after it dies, during a job! Thanks for the lesson on venturing the fuel! I will try the method that you did!
@ZombieDaveAZ4 жыл бұрын
Hope it helps you out. Thank you for the comment.
@ammoalamo64856 жыл бұрын
I recognize my saw must be a re-branded Poulon because it's controls look exactly like your Bumblebee. I have the same hard-to-restart problem. I thought it was unfixable, but now I see how I can try something new. Thanks. I have a hard-to-start weedeater also, will look for water in the fuel tank and gas cans.
@donjohnson86275 жыл бұрын
I like your analytic approach and your ability to articulate your experiments/explorations---so here is a word for ya---"VENTURI". That is what a reduction in inside diameter is called where an air flow passes through a carburetor and is forced to speed up. That area causes an increase in air flow speed AND (the important thing) a drop in pressure (so there is a relative vacuum there to pull the fuel in and vaporize it). You did a pretty good job of showing and explaining the simple venturi in this carb, but I just thought you and other folks might like to know what it is called. I also liked your demonstration of how the fuel is drawn out of the fuel line into the vacuum where the air passes over it at speed and turns into a vapor. GOOD JOB and VERY clear! One point to check AFTER a "no start" and you have changed the fuel for new is to clean the spark plug to be sure it wasn't contaminated with water before you changed the fuel and is still that way----won't work if it has water on/in it for some reason!
@ZombieDaveAZ5 жыл бұрын
Yeah I didn't explain the low pressure as good as I should have. But I did call it what it is @ 03:59 . Honestly I get too anal about stuff so some guys do the 10 second skip. Oh well just trying to cover all the bases. Thanks for the comment and the water soaked spark plug is an excellent point. Thank you. I hope you sub and comment more on other videos.
@philliplawerence57845 жыл бұрын
He named it properly in the video, at about the 3.58 mark. Good suggestion about the plug and water, but actually chemically pure water is an excellent INSULATOR ! It's the minerals/salt/etc in water that can make it electrically conductive.
@markthomas21664 жыл бұрын
Can't believe I had to sit through 16 minutes of theory but the last 3+ minutes was worth giving you a thumbs up.
@ZombieDaveAZ4 жыл бұрын
Lol, is that kinda like saying " you're the smartest stupid person"?! Don't follow this channel Mark, I have lots of theory videos. I appreciate the thumbs up very much. Stay safe.
@markthomas21664 жыл бұрын
@@ZombieDaveAZ Damn, dude! That was just mean. Is it too late to take my "thumbs up" back? No need to answer, I'm being sarcastic!
@ZombieDaveAZ4 жыл бұрын
@@markthomas2166 I just subbed you brother. Sarcasm is funny.
@SonOfLiberty19845 жыл бұрын
I think your video is spot on. I have a newer model Poulan and they have changed the housing for the air filter. They have implemented a skeletonized version or the cap that you cut a hole in. Maybe they realized that had a problem. That said, I have recently had problems restarting the saw but was ignorant on proper fuel handling and treatment for chainsaws. I am almost certain that improper fuel management is my problem. Thanks for sharing!!!
@ZombieDaveAZ5 жыл бұрын
Thank you for thecomment brother.
@csstechguy75543 жыл бұрын
That is the best idea i have seen in a long time to prevent lack of air getting into the carb after it has been running for a while. I will be drilling a hole in my air filter covers from now on and replacing the air filter far more often. Thank You for the TIP...
@johnwells79317 жыл бұрын
you are a very good mechanic keep up the cool work !! it's good to see people on here that know what they are doing !
@1055bobm4 жыл бұрын
Very interesting. My friends Poulan was not running smooth at top end and of course I thought someone had tried to adjust the carb wrong. After watching your video I am going to try your recommendation. Thanks for sharing your knowledge. P.S. I no longer use the gas at the pumps here in California. Strictly using race gas on all of my 2 cycle stuff. Thanks again.
@ZombieDaveAZ4 жыл бұрын
I use castor 927 mixed in with high octane fuel. I believe you have the right idea. But here in AZ, I give away more gas than I use. So If I service a chainsaw it goes out with a full tank of fuel and bar oil. Thanks for commenting and I hope you subscribe. Nearly all of my vids on small engines have a tip or trick that you may not have known before watching.
@save47754 жыл бұрын
Experiencing the same issues with my PP3816AV. I'm now convinced that this is what's happening to my saw when taking breaks the restarting. Thank you for your time in addressing this issue. It just makes sense.
@campmein5 жыл бұрын
I am going to do exactly what you did. Last year all of the sudden mine would not crank, fresh tank of gas, oil mix, all new. Cranked it up no problem, did some cutting, eventually cut it off and it would not restart. Changed settings, added more gas, filter was clean, etc,... finally quit trying. I emptied the gas out of it and put it back in case. I have been wanting to take it and check on it. Happen to look at videos tonight...wow, I think I can get it to work now. Thanks for the video. When ever I actually go out and test it, I will give you an update.
@jamesrussell75013 жыл бұрын
I'm impressed! I'm sold! I've been having that same issue with my poulan and now I have a pretty good idea as how to fix the issue. Poulan chainsaws used to be the best out there once but they dropped in popularity being they weren't as reliable as they once were, so other brands came into play and dominated the market like stihl, echo, husqvarna and a few others too, but since poulan chainsaws always worked well for me, I stuck with them because that's the name brand chainsaw I prefer to use above all others. I will say this, my old poulan can't even compare to my dad's 29yr old stihl chainsaw that still works hard each and every time he uses it. Your video is much appreciated and helpful to me and others that have been having trouble with poulan chainsaws
@ZombieDaveAZ3 жыл бұрын
Thanks so much for the kind words James. Best of luck to you, your dad and your families. Stay safe my friend. 😷👍🍺
@NikLyons4 жыл бұрын
I have a brand new poulon and I am going to drill holes in the air filter case straight out the box before I mess up the air filter. Nice video and explanation
@devilsoffspring55194 жыл бұрын
If it's brand new, leave it alone.
@jonosada555517 күн бұрын
Thank you for taking the time to show all the awesome people what's going on!! !!
@davidskipperskip54032 ай бұрын
Excellent man I have 3 of them but I learned on a weedwaker years ago it works can't pull enough air through the oil soaked air filter .I think that is what they want you to do buy air filters. Good fix keep it clean and give it air!!!😅😅
@garyolson33156 жыл бұрын
I wish I would have watched this video a few years ago and my Craftsman 42cc (Poulan). Great explanation of the various problems with fuel and carburetors! Great find with the problem and fix for your Bumble Bee, same as my Craftsman. I was in the middle of the woods the first time it happened to me, SOL an no 2nd chainsaw. I bought a Greenworks Pro 18 80v and 4 batteries. Hard to go back...... ;-) Thanks for the video!
@markdavis39574 жыл бұрын
Dave, Thank you very much for the very informative video, I like the thought process on how you got to the root of the problem. You explained the problem perfectly, and your solution. Good work!
@ZombieDaveAZ4 жыл бұрын
Thanks Mark. Appreciate the comment. I hope you are doing well.
@Ueddyyytube2 жыл бұрын
Thank you very much !!!!!! for the video, I have been messing with a poulan for almost 3 years, always changing Carburetor kits, lines , I have to replace 3 broken springs that I y broke them myself, trying to start this chain and all the hard work since do just A little. I made 2 holes just like the one you had there, now my saw runs like new, of course after I did some carburetor adjustment, but you're correct your idea truly works!!!!
@ZombieDaveAZ2 жыл бұрын
Happy that it worked for you too. Stay safe my friend. 😁👍
@kraftzionАй бұрын
I got a 4218 that I have modified everything on. Nothing left but the ring on the filter cover, bored the carb venturi out from 9.5mm to 12mm and shaved the butterfly shafts and screws, ported,muffler modded, ignition timing advance, opened the hole up from the fan to the carb section, ground all the safety rakers off the chain etc. Went from 14 seconds to 7 seconds on the same log. What has remained consistent is it won't hot restart unless you pull the trigger. Pull the trigger and it hot restarts 1st pull every time. So if you have one and nothing else works try that. Come to think of it, setting it back to fast idle might also work. I haven't tried it or even thought about it until now, found a solution that worked and didn't pursue it further.
@ZombieDaveAZАй бұрын
It sounds like you have a helluva saw! Yes, for hot starts and just general operations it's always best just to read the owners manual. For restarts : pull the choke all the way out and then halfway back in. That sets the high idle. Good luck with your modded saw. 👍🍺
@kraftzionАй бұрын
@@ZombieDaveAZ Yea it is 2010 saw I bought a couple of months ago for $20, no owners manual included. I'll try that next time. It didn't occur to me as all my other saws hot restart without a problem. Thanks!
@MiguelGarcia-rv3nj3 жыл бұрын
You took the time to explain in detail exactly where the situation is coming from. Something that not everyone else does . I DO really appreciate it Thank you!
@ZombieDaveAZ2 жыл бұрын
Miguel, KZfaq seems to be very selective about when it wants to notify me of a comment. I just saw yours and wanted to thank you for taking the time to comment. I appreciate it and apologize for delay. Have a great day my friend and stay safe. 😁😷👍
@lonnieblackwell51074 жыл бұрын
The air fix sounds like a potential fix for my Poulan , possibly also an Earthquake which has the same hot start problem. I"ll have to check the air cleaner cover now that I have seen your fix.
@nigelcarren6 жыл бұрын
Good morning Dave, (its me 'Welch' plug guy). Thanks for pointing me in the direction of this video. I teach armour-making to the enthusiastic a few times every year, and for me the essence (essence=french for petrol, but that is just a coincidence) is hands-on and all about myth-busting, which seems to be your standpoint. Your demo at 6:00 with your airline is the best and perhaps most important carburettor function demo I have ever seen... It really is as simple as that. Yesterday I learned the word 'Welch' plug, and today I learned the word 'Hygroscopic'. You are my kind of teacher... and if I lived in Arizona (I have armour collectors there by the way), I would take you for a pie and a pint! Cheers again and have a great summer. Nigel and all the mice
@larrybrenner43793 жыл бұрын
Thank you for this information! I actually got tired of pulled the rope and gave the saw away to my nephew. It was good information, I have a homelite purchased new and replaced the coil and got it running again, it is now very old, from the 70,s It runs and gets warm and does not restart until it cools off. Also have never changed the filter, just blew out. Will check it out and see what happens. Haven't tried for over 9 years, liked it so well couldn't bear to throw out.
@ZombieDaveAZ3 жыл бұрын
I have a craftsman saw that I feel the same way about. Thanks for sharing brother. 😎👍🍺
@tonymccurry17053 жыл бұрын
Likely crank seal failure, had that problem on a C-72 years ago.
@Danafondo5 жыл бұрын
Last fall I did the poor man's version of this after I watched your video. I took the cover off to restart it and then put the cover back on. Depending on usage this year, I will probably drill the holes. Thank you very much for uploading this.
@ghiagoo4 жыл бұрын
Fabulous explanation about carburetors. Best I’ve ever seen on KZfaq.
@ZombieDaveAZ4 жыл бұрын
Thanks buddy.👍🍺
@JF-ge8hb2 жыл бұрын
Nice basic explanation of how a simple carburetor works and good catch on the air filter housing design flaw. Great job
@Halscamp6 жыл бұрын
Been scanning through your videos for the last few minutes. Very interesting stuff to me. My first power saw 19 years ago was a McCulloch Mac (forget the size) and it would never start the second time. I got fed up and got a Husqvarna. When my father passed I got his old saw and unknown to me it was the exact same McCulloch as mine. I kept both running for the next 15 years or so and finally sold them for $25.00. I told the buyer they were hard to start when warm -- hope he made out ok. Subscribed so I can learn something.
@ZombieDaveAZ6 жыл бұрын
+Halscamp I appreciate that buddy. I subbed you as well. Please join in and ask a Q or help out with an answer when you can. I need all the backup I can get. Welcome aboard!
@Halscamp6 жыл бұрын
Thanks for the invite. I have a small business and have at least 6 gas push mowers, 3 ride ons, 1 zero turn, 2 - 2 stroke grass trimmers, 1 - 4 stroke grass trimmer, hedge trimmers, leaf blower, power saw, old, old tractor, 4 wheelers, snowmobiles, about 5 electric mowers, and 5 or 6 electric grass trimmers, generator, and and and. I spend 1/2 the year trying to keep these running and I am no mechanic by any means but I do survive without going to the small engine shop very often unless for parts. Live and learn I guess. If you don't mind you will hear from me.
@ZombieDaveAZ6 жыл бұрын
+Halscamp anything I can do just ask.
@JOEZEP545 жыл бұрын
Hi Dave, Nice presentation. Was just finishing a video putting a carb on an old Craftsman chainsaw only to find out now the coil is shot. Well on the bright side material for another video LOL. Stay well, Joe Z
@ButterfieldEric7 жыл бұрын
Awesome tip. There can be no harm in letting more air into the engine. I have that "bumblebee" model and it does the same thing every time, runs fine after initial start but after its warm it won't fire again. I have a date with disaster response in the morning and before I leave I will be making a big hole in my air box.
@ZombieDaveAZ7 жыл бұрын
Eric Butterfield clean filter and increased air flow will do you some justice my brother. Please let me know how it works for you.
@ButterfieldEric7 жыл бұрын
I just watched the poulan official channel and there's a warm start procedure I wasn't familiar with. They say specifically for a warm start, pull the choke and push it back in, this will engage the fast idle setting. I will try that first since it did come from the manufacturer.
@ButterfieldEric7 жыл бұрын
ulitepilot aka Zombie Dave the Poulan warm start procedure worked perfect for me. I failed the saw and touched dirt. The chain came off and I marred a few guide links. I can fix it with a file I'm sure.
@richhunter5156 жыл бұрын
Eric Butterfield any update on the saw? Warm start procedure still working or did you saw the hole in the air box?
@putheflamesou6 жыл бұрын
That sounds right. I never had problems with my Ppro 42cc but I did notice off the bat that it needed choke if cooling a VERY short time. I did check the filter before operation for clean. I chalked it up to the fact the lil bugger ran so good hot that it was prone to being picky at anything but hot. I thought my kind of girl! Glad u pointed that out, good thing someone reads the directions. My saw was second hand from a pawn shop. My buddy had me pick one up and he finally paid me for it...he is out in woods now pushing the tenth tree off the stuck bar with his tractor. Been in many tall trees(a few 500mi from home at my sons place) with hatchet and 2x4 steps nailed on limbs, ropin that Ppro up and never had to cuss her out, yet. My Sons neighbor helped hold wires away. then went out and bought a Ppro for himself. Wish I got a kickback for advertising. Nevers;;;;I wont get another Troy Built. Has a 20"er like new the recoil cogs slipped and could not get replacements, but tech asked if they could sell me another saw...? She thought I had a carb problem........just sayin!!!
@alsautner17324 жыл бұрын
I have the same problem with a Poulan Blower....I tried what you did in this Video and it worked. Starts everytime now. Thanks. Al
@ZombieDaveAZ4 жыл бұрын
Thanks for stopping by Al. 👍
@jeffreygoodson25635 жыл бұрын
Hi Zombie Dave, I wondered the same thing that you mentioned. I don't know much about engines but I noticed that when I took the cover off of my Poulan Wood Shark, 1950 that the carburetor air intake is nearly blocked by the cover. Thank You so much for your great video and explanation!
@Pete48755 жыл бұрын
Very good video. You really explain the gas, water, oil, well. I have seen tons of people that were also helped by gaping there plug to .30. I wish I purchased a Poulan instead of being conned by the propaganda. I purchased instead a Husqvarna 350 rancher. It has a ridicules one lever, choke, throttle, set up. Most of the time I have to pull it 3 or 4 times to start. Even when It's hot it wont start on the first pull. I could of purchased 3 Poulans for the price.
@ZombieDaveAZ5 жыл бұрын
Honestly Pete Poulans are hit or miss. Your Husqvarna should give you many years of service. Dont feel bad.Thanks for the comment.
@johnwells79317 жыл бұрын
very very good and informative video ! I deal with this issue every day as a mechanic
@ZombieDaveAZ7 жыл бұрын
John Wells. Thank You John. Your comment means a lot to me.
@timtravasos27425 жыл бұрын
I could not believe the air flowing across that tube sucked the mix up and aerosolized it! Wow! And I didn't think the fuel mix was drawn into the crankcase first! Ok! Good info. Thanks!
@lsattle3 жыл бұрын
see this video: kzfaq.info/get/bejne/maqRgsZ_17macoE.html done by the Walbro carb company that makes many of the carbs on chain saws. See at minute 1:10 a detailed view of the fuel delivery.
@jackallen62615 жыл бұрын
When you first scanned by the jar with the gas in it and a small hose my first thought was "Oh, he has a sippy cup with some moonshine in it. This should be an interesting video!!" LOL Cool idea, I one of each of those saws, lol. Double trouble! Thanks for sharing!
@telumears7 жыл бұрын
"Pullin, pullin, pullin" on your Poulon Poulon Poulon. That's how it got its' name.
@thomasgronek64696 жыл бұрын
Hahahahahahahahaaa!!!!!
@1995dresser6 жыл бұрын
The Best and Fast Way to Fix a Poulan Chainsaw is to Take a Garbage Can take the lid off and place the saw inside and Put he Can at the Curb
@terryspruill37996 жыл бұрын
telumears poulon are no good
@CyberPaulie6 жыл бұрын
lol
@phylliswhite41545 жыл бұрын
Treat your 500 dollar saw the same way and you will be doing the same thing with it! PULLIN, PULLIN, PULLIN and then it's off to a 200 dollar repair shop bill.
@jimbush83255 жыл бұрын
Ya know Pulling Pro [Poulan] get clogged mufflers too. So when you service the carburetor and ignition, dis-assemble the muffler and clean the screen off that is part of the Spark arrester. The carbon will build up and not allow the exhaust to flow out, which will starve the engine of fuel. I have seen this on most all chainsaws and weed-eaters, but for some reason not as much on the backpack blowers...
@ZombieDaveAZ5 жыл бұрын
I see this on "homeowner" equipment quite iften. They are not as likely to run their machine full throttle. Hardly anyone runs weedwackers full throttle. I check screens regularly and thanks for the comment.
@JefferyRusnock9 ай бұрын
Thank you so much for the advice, my poulan is doing the same thing even after a carb change 3 new fuel lines, new fuel and air filter and a rebuild kit to the original carb. It starts nice but eventually while it’s running and getting warmer will shut off and then very erratic when I do get it started when it is warm. I have it about 10 years new from Lowe’s and will try your breathing method! A very good video and informative ~ Jeff
@ZombieDaveAZ9 ай бұрын
Hey Jeff, it seems to have worked for a number of guys if you read thru some of the comments. I hope it works for you as well. 👍. Best of luck.
@charliesinatra10794 жыл бұрын
i solved my poulan starting problems in a slightly different way... i threw the damn thing away and bought an electric...i couldnt be happier.
@1110001001010013 жыл бұрын
What type of generator do you use to power it?
@charliesinatra10793 жыл бұрын
@@111000100101001 a 50 ft extension cord
@wallysgaragenshop45675 жыл бұрын
Hey Dave, I really wish I had your communication skills. This video has helped me a lot when it comes to two cycle carbs. Thanks :)
@mohygen28823 жыл бұрын
Thank you! I would have never thought of increasing the air flow through the cover. Brilliant discovery sir!
@mohygen28823 жыл бұрын
As life would have it, that wasn’t the issue. Going to try resetting the gap on the plug to .030. :)
@lostalchemist31805 жыл бұрын
Thanks for great video and tip. After blowing out filter and drilling 3 holes in carb cover like you showed my poulan 40cc restarts after use much better. Before this fix would almost have a heart attack trying to restart it.
@tonygray58245 жыл бұрын
well blow me down, that is just a great idea, you are a very smart guy, you have helped us all out here. a big THANKS
@ZombieDaveAZ5 жыл бұрын
Always happy to help out a fellow pirate. Thanks for commenting.
@charlessmith8333 жыл бұрын
My dad left me a small Poulan chainsaw. He loved my brother more than me. Didn't take long to get the message.
@latestplague37623 жыл бұрын
Out of all the comments I've seen this week, you my friend take the cake. For some reason this made me laugh the most.
@MrSGL213 жыл бұрын
of all the comments i've seen this week, this is the most fucked up one. and i understand it seeing as i have had a poulan chainsaw.
@heavymechanic23 жыл бұрын
Had the same starting problem back in 97, full throttle or it will not start hot. Never had that problem with a Homelite and now I have a MTD (Remington). The Poohlon runs good and I was tired of the leaking bar oil and it has rotten fuel lines, was not worth the time or money to fix a POS saw. Got the Remingtom RM4214CS from Amazon in March for around 100, its easy to start and cuts wood, no regrets.
@erkme736 жыл бұрын
Someone below asked you about a Bluemax chainsaw - stating that it works great until you try to restart it hot. That appears to be a known issue with the brand. It's a $100 saw, so I suppose that's part of the issue, but I concur that when it runs, it runs strong. If I shut it down and restart within a minute or two, no issues. If I let it sit longer, it won't restart. If I let it sit until it completely cools, it restarts no issue. So there appears to be a sweet spot where if it's cooling down, it won't restart. I have been able to get it to fire during that no-go zone and here's how: I removed the air filter and pull string head (that way I can crank with a drill - saving blisters for other projects). With choke fully on, it'll fire, but will shut off within 1-2 seconds. Quickly opening the choke by the smallest possible margin, while simultaneously applying throttle will allow it to keep running - albeit very rough and requiring constant adjustment of choke/throttle. Once it runs like that for 30 seconds or more, it'll calm down and run like normal again - at which point it can be turned off, pull-head and air filter reinstalled, and then quickly restarted (waiting more than a minute or two and it'll be back in that no-go zone). It's a pain, but it works. I say all of this to ask you, based on the symptoms and actions taken, can you think of what would cause this type of hot restart issue? Clearly, it's just a matter of temperature. Perhaps some tolerances are changing? It did this from the first day I've owned the saw. EDITED TO ADD: There is no primer bulb on this saw. You have to prime it by pulling at least 4x with choke on when it's cold. Pain, but it works every time. Also filter cap seems to be vented all the way around (unlike the "pull-on" brand). I may still drill more holes in it though.
@ZombieDaveAZ6 жыл бұрын
What you are describing to me would have me pull the carb and double check the gasket that allows "pulse" air to assist the carb. Im not 100% its a temp related issue. More that it cant hold suction in the carb. Another place to look would be the pump side of the carb. If you solve this, let me know please.
@Slane5836 жыл бұрын
I acquired an older Poulan from the mid to late 80's from a friend a few days ago, all-metal casings except the recoil housing and air intake. It's a 2400 Woodmaster, easiest little thing I've ever worked on. Unlike a lot of newer saws, this thing is like a two-step set of LEGO blocks. But when I had it torn down to a little engine chunk to clean it I noticed that the intake wasn't really pulling air from anywhere, except from around the inside the air filter shroud. So it literally has no direct air feed from outside the saw except through maybe some cracks and crevices. I was pondering on drilling some holes in the outside housing but I'm reluctant of ruining an older saw since parts are harder to find. Even though the saw is in almost mint shape the gas cap also seems to leak gas from the vent hole. So it seems like even the smaller Poulans that were still made in the US back in the 80's had intake and gas cap flaws. Once I eventually work the kinks out it's going to be a small backup saw for doing smaller wood and limbs so I don't have to use my MS251 or Homelite 290 for that. Once I've got my blown Husqvarna 570 rebuilt I'll have a small four saw fleet. :)
@timtravasos27424 жыл бұрын
I've never seen a demonstration like that. Wow!
@emersonmiles075 жыл бұрын
OK, after watching this, decided to drill 4 holes on the top part of air filter cover... also, decided to wash the air filter. I must say, I ran the Poulan Pro chainsaw for about 40 minutes straight. It miracoulsly idled for that long! Of course, I also replaced the spark plug, and used TruFuel 40:1 mix (stuff is a little expensive but the saw loves it). Man, this thing worked more than it ever did. Thanks for your tip!
@ZombieDaveAZ5 жыл бұрын
Quick story you might find interesting. As a pilot the piston engines I fly have a Hobbs meter. Its a clock that runs only when the prop is spinning. It serves 2 purposes. How long the engine ran which is the countdown to an overhaul of the engine. Its called TBO. (Time Between Overhaul) So by you using the fuel premix as pricey as it is, you are maximizing TBO. Make sense? Remember that old commercial "You can pay me know or pay me later". You are helping yourself greatly by using the premix. Smart man you are. Merry Christmas to you.
@emersonmiles075 жыл бұрын
Thanks for sharing. I agree with what you say. Yesterday, I used the saw again, and let it idle for a while until I knew what was going to be cut. It never shutoff... so thanks again, and Merry Christmas to you!!!
@bakedpagan46745 жыл бұрын
dont trust the jufuel itll still gunk carbs best have carb cleaner on hand
@leeisenberg2 жыл бұрын
Thanks for sharing Zombie Dave. My dad's Poulan P4018 is only 6 years old, hasn't been used hard at all & I'm replacing fuel line, cleaning air filter, & having to adjust high & low screws. Now looks like I'll be popping a few holes in the air cleaner as well. Thanks again, take care from Tn.
@zionisimkills10984 жыл бұрын
best advice, buy an old Husky, run only, Non - Ethanol gas and you will never have a problem, I have an old 480 and a 2100 they will cut anything you will ever encounter. Cheers.
@cerberusbonsaiarboricultur7744 жыл бұрын
"Bumblebee" LOL I've called mine that as well, they've made a good deal of similar-looking saws of varying displacement but the pp4218a seems by-far the most common, I love mine I got it for $50 at a pawn shop and have been pushing it hard ever since, have the rakers filed so low on my chain (don't do this..) and obviously keep it razor-sharp and it just eats wood...I did a muffler-mod on it but got no gains (am using a tachometer) however the air-induction seemed the 'bottleneck' and I'd meant to devise some DIY /mcguyver'd filter-box but never got around to it (so my saw screams from teh muffler mod, w/o any power gains.....like a honda with its muffler cut off ;D ) so am VERY thankful you posted this am going to modify mine similarly (although I'm thinking to remove even more material, I mean it's just gotta be a skeleton for that filter right? ) Do you tape your filter-housing into place or does it stay firm? I have to tape mine every time I touch it or it'll be loose the next time I open it up, in fact more than half of my saws are that way so I always just run a line of tape around the filter-housing//saw-body interfacing!
@ZombieDaveAZ4 жыл бұрын
My filter housing/cover no is loose when I take it off too. The old Stihl saws have a spring wire that hold the cover in place. Maybe I'll try something like that. Thanks for your insight brother.👍
@bentback13 жыл бұрын
I bought a 50cc from Sears warehouse not knowing anything about chain so I had to do some reading because it would not start. Bottom line, bad piston and sleeve, cap no vent drilled carb.' cover, coil, spark plug.
@jeffreythomas27115 жыл бұрын
Thank You. This makes Perfect sense. I figured that it was a design issue. I start my Poulan wild thing chainsaw and run it for about 5 minutes then it shuts off and it won't start again until it has completely cooled off. I thought maybe there was a sensor but now I see there is none. I will modify my chain saw the same way that you have.
@ZombieDaveAZ5 жыл бұрын
Be sure to let us know if it worked for you. Thanks for commenting.
@williamlillie70695 жыл бұрын
Please remember! The mixture ratio for chainsaw is 40 to 1, 40 parts fuel to 1 part oil. Running your chainsaw without oil will cause it to overheat and sieze.
@richarderamirez59094 ай бұрын
I have a poulan and husqvarna that experience those exact problems. Going to try your idea today. I have been taking the alcohol out of my gas before using in my two strokes.
@ZombieDaveAZ4 ай бұрын
Good luck. Don't forget to pull the choke out and then push it back in to set the hot restart. You should be good. 👍
@fernandopo63994 жыл бұрын
Another possible fix is to adjust the carburetor screws, as described in this video: "How To Easily Fix A Chainsaw That Bogs Down By Adjusting The Carburetor". This is a Poulan specific video.
@brianj1234585 жыл бұрын
I understand what your saying but not sure about it. I bought a brand new Poulane used it for 1 hour stopped for lunch break it would not start again and took it back and got new one and went back to job sight it ran for hour or two then same thing happen. I fixed it by returning it to store and buying an Echo never had any problems since echo is 3 years old and still running fine lol. I suggest to everyone do not buy a Poulan but just my opinion
@ammoalamo64853 жыл бұрын
My gas string trimmer used to NEVER re-start after using it for even a couple of minutes. I had to quit and come back after a few hours then it would start. So I drilled several extra holes all over the cap over the filter, and now it re-starts easily every time. I guess it is the same principle at work shown here.
@ceedub62336 жыл бұрын
Thank you for posting this video. Last week a friend gave me his 3 year old chain saw, a Poulan Pro. He said it ran for about 3 hours, something made it stop working. He took it to a lawn mower repair shop. He said the oil pump to the chain bar was replaced. After he got it from the shop he used it for about 2 hours, and now it will not start. So Now I'm thinking the fuel may be the problem as well as lack of air to the carb. after watching your video. Now at least I have a starting point as to where to began. trouble shooting.
@ZombieDaveAZ6 жыл бұрын
+christopher dustin Good Luck Chris. Let us know if you end up with a good saw.
@ceedub62335 жыл бұрын
Update. I was really stumped until I watched your video. I drilled several 1/4 inch holes through the air filter cover. I believe it was 10 or 12 holes, I wanted as much air as possible. my saw runs great, it restarts after I let it sit after use. I showed the guy that gave the saw to me. He said it runs and sounds better now than it ever did when he first bought it. Thank you for this video.
@ZombieDaveAZ5 жыл бұрын
Thanks for the update Chris
@Moroni1086 жыл бұрын
Excellent design flaw catch. Now that I've been looking at your video, the only part of the filter that is being used is the immediate areas near the holes. All the rest of the filter is pressed up against that plastic cover and is pretty much not serving any purpose for the most part. I'm going to make the same mode with a few extra holes around it. Thank you!! Also, I like the "Laboratory" :)
@ZombieDaveAZ6 жыл бұрын
Thanks Captain! I appreciate you taking the time to comment.
@noahsturgill203 жыл бұрын
Good info but you're way too sloooww getting to your point you got 20 minute video that you can cover in less than five
@terrymcclean45826 жыл бұрын
Wish I had a Poulan so I could make this change. But my old Craftsman has a foam filter and no obvious restriction to air flow. Great demonstration on the venturi effect.
@jamesfarley51836 жыл бұрын
Think of it more as a vapor restriction than an air flow restriction when the plastic cover is on. The breather holes at the bottom lets the heavier dirt/sawdust particles to be trapped at the bottom,leaving the top half clean to supply plenty of air.
@paulzacher56726 жыл бұрын
Great video. Nobody wants to show or say what the real problem is: faulty design. EPA dictates what emissions are allowed. Causes problems for 2 stroke engines. You sir tells how to fix it. Thank you
@ZombieDaveAZ6 жыл бұрын
Thanks Paul and you hit the nail on the head w/the EPA.👍
@dianemartinez43625 жыл бұрын
way to long get to the problem, didnot help but thanks anyway.....
@ZombieDaveAZ7 жыл бұрын
If you have a particular problem and would like me to help you out,just post it here and Ill do my best. I promise that someone else has the same problem and will benefit from it. Thanks for taking the time to post a comment.
@ScumbagMarcello7 жыл бұрын
ulitepilot aka Zombie Dave I have the same poulan saw, the green on and I just bought it and it's miserable to pull start it, what could that be
@ZombieDaveAZ7 жыл бұрын
Psycho Just bought it as in New out of the box or new to you?
@ScumbagMarcello7 жыл бұрын
ulitepilot aka Zombie Dave New out the box
@ZombieDaveAZ7 жыл бұрын
Psycho Another guy had the same issue if you read thru the comments. Assuming everything is in order,spark fuel just squirt some fuel mix in the lower barrel of the carb with the throttle held open. that should get it to fire and then run as it should. let me know.
@ScumbagMarcello7 жыл бұрын
ulitepilot aka Zombie Dave okay thank you I'll have to give it a try
@runningbird19726 жыл бұрын
Thanks for the info going to try it out. I should have known that because have three carbs on my Road Runner.
@davidlewis6205 жыл бұрын
Hey Zombie Dave, am new to your site and like it very much ! I will be a regular viewer. When my father passed, he left a Homelite IV Super 2 chainsaw that gave me the exact same problem !!I In 95 degree heat, tugging and pulling on a starter rope after just using it and turning it off, I thought about tossing it into the lake !!! Granted , it is a model from about 1985 or 1986, it lasted and ran well all those years ! Now I will try your solution before I decide to toss it. Thank you for giving us a possible solution !!
@ZombieDaveAZ5 жыл бұрын
Thanks for the follow David. Those older models are not known to have this problem. Be sure it is running order before you make any mods that you see on my channel please. Start with the basics. Fuel filter,fuel lines,carb is clean with good diaphragms etc. It could be a 'seasoned' saw and just needs a tune up. If it ran well pre ethanol you may just need to make a carb adjustment.
@davidlewis6205 жыл бұрын
I will check all those things first before I try your mods ! Thank you for the advice !!
@TAO4955 жыл бұрын
Great, I learned so many simple fixes I can try and why I would be doing it before I junk my saw. I can not wait for the sun to come up tomorrow morning. I was ready to put my junk into the trash can😀😀 Thanks very much.
@mr.chaosvicious59685 жыл бұрын
Any updates on the progress of the repair of your saw? It would be appreciated.🙂
@TAO4955 жыл бұрын
@@mr.chaosvicious5968 A few days ago I was doing some small tree cutting and my saw stopped and could not start it again. But yesterday I pulled A a couple of times and started working pretty well. I think bad gas. It's working now. So fR so good.
@mr.chaosvicious59685 жыл бұрын
@@TAO495 We don't really have those kinds of problems. We have a couple of gas stations in town where we live that still actually sells 100% gasoline with no ethanol mixed into it. That's what we actually use for ALL of our weed eaters chainsaws and what have you.
@BullMtnBilly-vm1wf4 жыл бұрын
Also heard changing spark plug gap to.30 helps.
@Just_Mark4 жыл бұрын
That’s what I did. Fires right up. Even so, I’ve noticed the same issue with the filter and pondered drilling holes myself. Next time it’s apart, I’m going to. A few years back I lived out on Washington’s upper peninsula. There was this guy parked near the entrance of the dump with a sign that he takes old mowers. I stopped to chat with him (and give him the mower I was going to junk). He told me the biggest problem with any small engine is the ethanol in the fuel. I ended up going to his shop to buy one of his used mowers. He told me where to get ethanol-free gas (with all the logging up there, it’s easy to find). Ever since, I’ve been running ethanol-free. I had my Craftsman saw apart (rebranded Poulan) this year. The carb looked great. However, the plug looked wet/black. I cleaned it and checked the gap, wasn’t even .025. I opened the gap up to .030 and this baby runs like a champ!
@JosephNine6 жыл бұрын
put a copy of this video away , so when poulan starts doing your fix . you can get some royalties
@fromanabe86396 жыл бұрын
You're absolutely correct about Poulan Pro's. I've found the only way to get one to start is to go out and buy a new one. One use and that's it. I now have two of them on a bottom basement shelf that will never start again.
@ZombieDaveAZ6 жыл бұрын
Froman Abe Ill take em!
@susanwoo4666 ай бұрын
We tried everything! Runs like a charm, till I stop the engine, then its done. This is going to be tried! I have a sthyl that we alternate, but end up using it till we are through. As a 66 year old gal, not starting is a job stopper. I could go for a lot longer if I didn't have the starting problem. Upper arm pull strength gives up fast. Will let you know if this works!
@ZombieDaveAZ6 ай бұрын
I have my fingers crossed for you dear. I'm a 66 yr old guy and I feel the same way. No start is a deal breaker for me too. Let me know if it helps you please
@BenjaminGoose7 жыл бұрын
Really good demonstration regarding the mist thing!
@igoogleyo35527 жыл бұрын
KZfaq/the world needs more people like you:)... thanks for sharing and making the world a better place...I was gonna throw mine away:o
@ZombieDaveAZ7 жыл бұрын
igoogle yo Thank You for the comment. Glad you didn't throw out your saw. Good Luck
@thomasgronek64696 жыл бұрын
I had a Mcculloch eager beaver that vibrated apart in my hands...I took it apart the rest of the way, and threw it in different trash bags so it couldn't be reconstructed. That is how dangerous I thought it was.
@Yorktown-pb8bd2 ай бұрын
Tgank you for the tip. Another guy stated if it gets hit and stops running increase the spark plug gap to .30.
@thomasgronek64696 жыл бұрын
VERY WELL DONE !!! Thank you for the math, chem, and physics tutorial on a common sense level. Thank you.
@ZombieDaveAZ6 жыл бұрын
Thomas Gronek Thank You Thomas. I didn't think of it as math,science physics etc until you said it. Thanks for the sub.👍