POWER SETTING EFFICIENCY - Air Venturi Avenger - Airgun Angie Makes It Her Own

No video

POWER SETTING EFFICIENCY - Air Venturi Avenger - Airgun Angie Makes It Her Own

Рет қаралды 32,324

3 жыл бұрын

The Avenger is an inexpensive pcp that allows you to easily customize it in so many ways without being an airgun expert! In this video I’m on a mission, to make this one my own! I want the most power behind each pellet without wasting air!
#airventuri #airventuriavenger #predatorinternational #jsbpellets #pcpairgun #airgun #pelletgun #prochronograph #velocity
Products:
Air Venturi Avenger .25 PCP links.airgunweb.com/AGPS-AirV...
Hawke Vantage 30 4-16X50 links.airgunweb.com/AGPS-Hawk...
Pro Chronograph amzn.to/3pjWqk8
JSB Exact King 25’s 25.39 Grain links.airgunweb.com/AGPS-JSB-...
Man it’s a great time to be an airgunner!!!
It’s time to Make a Difference! Enlist at www.AirgunArmy.com and Support the Sport!
AGPS Content Disclaimer: www.airgunproshop.com/agps-co...
***** AGPS Content Disclaimer *****
By viewing or flagging this video you are acknowledging and are in full acceptance of the following:
Our videos are strictly for documentary, educational, and entertainment purposes only. Imitation or the use of any acts depicted in these videos is solely AT YOUR OWN RISK. Treat Airguns as FIREARMS and observe all the same safety considerations as such. Any and all work on airguns should be carried out by a qualified and insured individual. We (including KZfaq) will not be held liable for any injury to yourself or damage to your airguns resulting from attempting anything shown in any our videos. These videos are free to watch and if anyone attempts to charge for this video notify us immediately.
Links are provided to help viewers connect with products mentioned or used in our videos. PLEASE NOTE THAT WE DO NOT SELL ANY FIREARMS. Airgun Pro Shop, LLC. sells and supports airgun related products. Some airgun accessories can be utilized with firearms, however, we do not support or endorse any use outside of their originally indented purpose.

Пікірлер: 175

@randycombs112 3 жыл бұрын

Had mine for awhile now. Bought it just out of curiosity. I have Daystates, FX,Raw,Taipans, and numberious other's. This is well worth the money. And actually easier to tune than alot of other rifles in the high $$ range. After throwing thousands of pellets and slugs thru this, I can say it's a winner. No problems so far. Time will tell. I ended up tuning mine to 54fpe with the Jsb 34gr. 40 shot string all within 5 fps. 300 bar fill and falling off the reg at 140bar. Love's slugs too. Do your part with tuning and testing, you'll have yourself a nice 100+ slug gun. Side note. I did open my barrel port just a tad. Stock opening is on the small side. And did a simple barrel polish. Very efficient and accurate rifle. I'm glad I bought it to test out for myself. Good job on the video.

@airgunangie17 3 жыл бұрын

All awesome info, I totally agree!

@Storm-rp9xe Жыл бұрын

@Randy Combs, what PSI did you end up setting your regulator at for the 34 grain pellets?

@randycombs112 Жыл бұрын

@Storm 36 It's been awhile on that rifle. I honestly can't remember. All my testing sheets went with the rifle when I sold. I only wanted to buy one to put it through some testing. I do have a bullpup I'm supposed to get too. Just haven't got to shooting and tuning it yet. I'd say just try different pressures while doing your shot strings. You'll see where you personally will want to be. Have fun. HH. HS

@prevailairgunner4475 3 жыл бұрын

Great and simple video for those looking to fine tune their avenger. Thanks AA.

@airgunangie17 3 жыл бұрын

:) Pleased to hear it! Thanks!

@KINGBREAKBARREL 3 жыл бұрын

MINE IS SET AT 2900 PSI I HAVE THE .22 CALIBER AND I GET 55 FPE WITH THAT RIFLE ITS NO JOKE.. NICE 👍 VID ANGIE🎯🎯🎯🎯🎯🎯

@lamardaniels6625 7 ай бұрын

What grains are you using?

@akker-5397 4 ай бұрын

Very useful! Thank you!

@garettpridotkas766 6 ай бұрын

I'm so glad to find a video on this subject! Thanks Angie

@daviddbf2691 3 жыл бұрын

thanks for the video I have been looking at every video with the Avenger now I have a good starting point and you have a new prescriber keep the Avenger videos coming

@airgunangie17 3 жыл бұрын

My pleasure, really! Thank you so much, I'm glad you found the info you were looking for.

@slowpokeairgunner4027 3 жыл бұрын

That's awesome! Mines set at 2700 psi, running an avg. of 908 fps over the first mag, 2nd: 906.88 - 3rd: 881 - 4th: 840.88, I'm sure I was falling off the reg around the top of the third mag. This is when it was new and I have shot unregulated guns so long now that I'd forgotten and just kept on cranking 😆 . My unregulated bullpups have smaller tubes as well, I was just excited I could run five mags until I was at the yellow 😂 That was with a 300 bar fill as well. I need to chrony it again. I love the setting with the 2400 you're getting, but, to get that 903, where'd ya set the hammer spring? I don't even know how many turns mine is currently set, I'm still running stock, but from a full fill now. If you didn't adjust the hammer spring then that means you're smacking the valve with the same force with the same results, less air = good deal. That also, possibly, depending on how much air is causing turbulence as it spits out the barrel, if it is, then the turning down also increases accuracy. I'm thinking out loud again, aren't I... 😳

@mpe777 Жыл бұрын

Great video. Thank you for teaching me this.

@willwillis2381 3 жыл бұрын

As always "Awesome. Google job. Great info, spot-on! Keep it up.☺

@adventuresinblackduck9539 3 жыл бұрын

Some of your best work. Nice job.

@airgunangie17 3 жыл бұрын

Thank you 😊

@matthewvannoy500 3 жыл бұрын

Thanks this was very helpful

@airgunangie17 3 жыл бұрын

Sweet! That's what I was hoping for!

@straightshooterz 3 жыл бұрын

Very Informative! Awesome video

@airgunangie17 3 жыл бұрын

Thank you.

@cousinfuzzy4544 3 жыл бұрын

Good stuff double AA thanks for the info.

@airgunangie17 3 жыл бұрын

Thank you!

@kevine9986 2 жыл бұрын

What no Hammer spring adjustments between reg settings???

@andrewolsink1732 3 жыл бұрын

nice video, that will help to set mine

@shanepitzer4126 3 жыл бұрын

Great info, thanks for sharing! Looking forward to the next Avenger vid. I've got an Avenger, 25 cal, in the pipeline, should be here in a few days. My first PCP. Your info is very helpful in getting started.

@airgunangie17 3 жыл бұрын

Glad to hear! Thank you!! Congratulations!!

@airgunangie17 3 жыл бұрын

@Adriel Jameson great! Happy and spot on shooting!

@SalYourPalChencho 2 жыл бұрын

Great Video! I recently bought this gun and was wondering where a good sweet spot setting was? I wonder what it would be with heavier pellets, and/or slugs! Again, great video!

@amadomata459 Жыл бұрын

Thank you for a great video. Best to you.

@charlesdees281 2 жыл бұрын

Good job. I kept messing with mine and got my 22 caliber up to 45 foot pounds of energy. I think I'm going to get it 25 caliber next to see what I can do. You did a great job explaining that you don't have to have that regulator maxed out nor do you have to have the hammer spring maxed out either to get great results

@AirgunProShopLLC 2 жыл бұрын

Thank you! That's quite the punch! .25 cal is my favorite small game hunting caliber.

@go-huntingbefree3272 Жыл бұрын

Love to see you videos.

@ralstonraz 3 жыл бұрын

😊👌👌👌 Nice and crisp Video.

@airgunangie17 3 жыл бұрын

😎👍😉

@AirGunnerrr 3 жыл бұрын

Great Video...Thank you

@airgunangie17 3 жыл бұрын

Thank you!

@bluewater454 3 жыл бұрын

Hey Angie. New subscriber. Like your stuff. Keep it up.

@airgunangie17 3 жыл бұрын

Thank you!

@zato6226 2 жыл бұрын

Just the setting I was looking for. Thanks for the instructions. Women give a more thorough instruction/explanation than men in my opinion..

@DA-jw6nm 3 ай бұрын

A man would have mentioned the hammer setting

@Nautilus1972 10 ай бұрын

Nice!

@mikenick4571 3 жыл бұрын

Another great video Angie! This gun is on my short wish list. I think I'd lower it back to the 2200 psi setting. Your only gaining 9fps and less then a fpe by going to 2400. I would have to think that would give you several extra shots for very little, almost negligent power sacrifice.

@airgunangie17 3 жыл бұрын

You’ve got a good point, I may back it down some, thanks.

@jvidrio31 3 жыл бұрын

That was very helpful. I have mine at 2000. And have no idea where I'm at on the fps.and 903 sounds good so ill up the pressure a bit. And I should be set till I can get a chronograph. 👍

@airgunangie17 3 жыл бұрын

Pleased to be a help, thanks for letting me know! :)

@bucsam1660 3 жыл бұрын

Where have you been all my life!!! Great video... Just subscribed, gonna go listen to the Stones sing Angie!!!

@AirgunProShopLLC 3 жыл бұрын

Sweet! Thank you! If you'd like to see more of these videos check out more of my videos on my Backyard Shooting Channel as well!

@bucsam1660 3 жыл бұрын

@@AirgunProShopLLC Will do...

@bucsam1660 3 жыл бұрын

@@AirgunProShopLLC Oops where do I find it!?

@cjwickie 2 жыл бұрын

thanks for the info. what scope are you using?

@Storm-rp9xe Жыл бұрын

Just got the AVA in .25 and I have a question: When you did this test did you do any adjustments on the hammer spring? I figured if I got pretty much the same numbers AND really good accuracy at 50 yards, it would be nice to just set the regulator and not mess with the hammer spring. I’ll mainly be using mine for pest/varmint control. TIA. I’m still having a little trouble understanding the hammer spring adjustment theory and how to do it properly. TIA

@joellecotton5506 Жыл бұрын

i have the exact same gun , changed the stock. put an 16cc plenum on it. re-tuned to 900 fps with the reg at 2000 and the hammer spring at 1 1/2 turns in. i get about 75 shots now

@damelos4039 3 жыл бұрын

The PERFECT video for what I needed! I don't own a chrono and didn't want to get that far into things. If I get this gun...and it looks like I will, I will know to set it for the PSI you showed, with matching pellets of course. Thank you so much!!!

@inblindmodeler8786 Жыл бұрын

Excellent 💯 Blessings 💯 🙏

@sunnysouthtwin 5 ай бұрын

Hi Angie I am looking at the avenger x what do you think of this gun in 22 cal

@sniperrunduk46 3 жыл бұрын

thanks info

@numizaairguns1373 3 жыл бұрын

Great video and informative. What about tha Hammer spring tention? How many turns?

@airgunangie17 3 жыл бұрын

Thank you! 2 1/2 turns.

@walterdavila525 2 ай бұрын

Hola ¿Cuántas vueltas de martillo le diste para llegar a ésa confirmación? Gracias y saludos desde Argentina.

@davidmartin3746 3 ай бұрын

Nice job, Ill use this as a baseline for my .25 Avenger which has a 16cc external plenum which adds 6fpe. Ill test the 25.39 and the 34s but also have the JTS 29g which is a nice in between caliber. Ill also play with hammer spring turns which I must have missed in the video, Steve on AEAC says the reg is the main power adjuster and the hammer spring is the fine tune velocity adjuster, whatever the reg pressure is, shoot 10 at different hammer spring turns to see what the closest shot velocity spread is, this is where the harmony or balance is between regulator and hammer spring, just thought Id add that to my comments. thanks again.

@bonacci01 3 жыл бұрын

Great info! My 25 Avenger is in the mail. I was looking for this, similar to what aeac did for the .22. Did you leave the hammer spring the same for all the reg adjustments ? And if so , would tuning it to the reg increase efficiency even more ? It would have been cool to see shot strings with how many shots you increased per fill by dropping the reg 500 psi. Thanks ! New sub !

@airgunangie17 3 жыл бұрын

Thank you! That's super exciting, you'll love it! As far as the hammer spring on mine, I turned the hammer spring a total of 2 1/2 times and I'm not sure about the tuning, it may quiet it some. I plan to include a shot count test on my next video. I appreciate your support!!

@juniantobakasniperbomber6576 3 жыл бұрын

Is airgun ia the best

@jjssnb3790 2 жыл бұрын

Ur so awsum love ur gun holder 🤙

@ironhead320 7 ай бұрын

What scope you have on that

@kenroman777 2 жыл бұрын

@AirgunProShop what about as the manual says.. changing hammer spring?

@garettpridotkas766 5 ай бұрын

Angie, how many shots did you get before falling off the reg at 2400 setting?

@wadedeeds1738 Жыл бұрын

How many turns in on the hammer spring.

@327steve 3 жыл бұрын

Looks like this may be the route I go for my first pcp. Thanks for the great info.

@markc3571 3 жыл бұрын

I bought one earlier this year it is my first PCP and I am happy with it. No need to spend $2000 when you can get one for 300.

@V3g3t41987 3 жыл бұрын

@@markc3571 i just got this avenger in .25 and to be honest, none of my super expensive rifles can shoot like this little 300$ gem. for 10x that price you can improve your groups by about a quarter of an inch and up your fpe by 45 with an fx .35....my only regret is not purchasing this avenger before i went on an endless search and burned way too much money for a 100 yard sub moa rifle. after lapping and polishing and giving her the ballistol treatment ive realized i didnt need to spend 2500 on a regulated pcp to get the results i was looking for.

@raynfir638 3 жыл бұрын

I have downed small deer with 14.6grain griffin hollow point slugs, shoot straight, fire true, and tune your rifle to you. I run my avenger at 1160 fps at around 28 ft lbs. A Lung shot will have you tracking but it's still a kill, possum, trash panda, and anything less is still food. Big game get gamo lethal or 14grain slugs. Point is a .177 will feed your family if you are accurate.

@bayonne Жыл бұрын

Did you make any adjustments to the hammer spring during your tuning ?? - Do you know where the hammer spring was set from the factory ?

@delronwilliams9037 Жыл бұрын

What is the hammer spring setting??

@GeorgeMillington-zb9ej 8 ай бұрын

I need some advice to tell me how to fix it

@stxferalboys 3 жыл бұрын

Wow thanks I really appreciate this video! I don’t have a chronograph so this helped me out. I can’t wait to test it out next weekend. Do you know how many shots difference it made with the adjustment?

@airgunangie17 3 жыл бұрын

Happy it helped! I have Not yet, I plan to do shot count test as I test ammo.

@stxferalboys 3 жыл бұрын

To get the hammer spring like yours, what are the steps I have to take? What does having too much hammer spring or too little hammer spring do? Sorry for the naive question. Thanks

@user-ie1jc9hv1d 4 ай бұрын

What bipods are you using on this rifle?

@jamesdenny4734 3 жыл бұрын

You have a super day... An jay !

@airgunangie17 3 жыл бұрын

Thank ya! 😊

@billmuench6998 3 жыл бұрын

Super video and great info. Unless I missed it I wondered what pellet you were using (USB's) weight and the hammer spring setting for each test. Assuming the spring adjustment is turned all the way out, how many turns in for each test? Thank you and keep up the good work. Age 81 and enjoying the 25.

@airgunangie17 3 жыл бұрын

Thanks Bill! I used the JSB King 25’s. Please forgive me but I don’t remember if I did a complete hammer spring turn each time or a half and like a dummy I didn’t record that info. I know I tightened it completely but backed it out 1 complete turn. I believe total from stock was 3 turns in. Sorry I don’t have better info for you.

@usernamemykel 2 жыл бұрын

Right behind you at 76, with a .22. Never too old or young - I'm riding a Kawasaki Ninja 400 KRT edition race/sport bike - because nobody says I can't or shouldn't (not that I'd listen, anyway).

@verdellparentaaawink268 Жыл бұрын

@@usernamemykel 63 and still a teenager with better and more expensive toys lol

@eddiecahall3824 3 жыл бұрын

🔥🔥🔥👍

@jimomalley1518 3 жыл бұрын

Have mine at 2200/2300 psi

@vansantsam 3 жыл бұрын

Good video, however, you did not mention any hammer adjustment which can affect velocity and fpe.. Did you bring the hammer up to max velocity and then back it off 5 fps?

@airgunangie17 3 жыл бұрын

I turned the hammer spring all the way in, then backed out an entire turn.

@davidquintero5271 10 ай бұрын

Right, 2400 psi on regulator, but i can't see nothing about hammer spring, i mean how many turns?

@straightshooterz 3 жыл бұрын

How many shots are you getting out 2400?

@Ryland35767 2 жыл бұрын

What should we expect from the Air Venturi Avenger? I have experience with five different Avengers in .22. One had a POI change that was erratic and unpredictable. Nothing seemed to work to correct the problem. The group would unpredictably jump three inches to the left but without changing the scope setting and after several shots the group would shift to the original POI. Strange behavior that I could not correct. Another of the five had a barrel that shot so low and right that I did not have enough scope adjustment. Scope shimming was not an option due to stressing the scope tube. Numbers three, four and five had regulator leaks. Those Avengers were the new baffle models that leaked 200 PSI in seven minutes and increased to 600 and 800 PSI over night. Is there a manufacturer’s defect in the new baffle models? Since the Avengers are a budget model and defects should be expected however all five in my experience were beyond tolerable defects. My air rifles and supplies are bought from Pyramyd Air and have not experienced the Avenger problems with other Chinese air rifles. The Gauntlet is a prime example. The Avenger baffle models were accurate on the bench but very unpredictable on the regulator while hunting. Even with all the problems, I am looking for an Avenger .22 that works with tolerable defects. The Avenger sounds like a good hunter.

@4449John 3 жыл бұрын

Hi Angie, been thinking about a first PCP for over a year now. Despite what a few have said, I'm leaning towards an Avenger in .25. Between you and one other shooter (1721), I see a lot of what I'll need in the .25 caliber Avenger. I was thinking of filling the plastic stock with foam like I used to do with my Benelli's, but I want to ask your opinion, if you could get the wood stock, would you change? I respect your opinion, so here I am asking you. I just hope I can find a .25 while my finances are capable. I must be committed, as I just ordered a pump for the day when a PCP might visit me. Foam filled plastic or wood?

@454CHEVYJV 3 жыл бұрын

I have the wood stock in .25 and I love it! A little heavier than the composite, obviously but the feel of it makes it so much better in my opinion. The composite stock to me just feels cheap and it's not really my thing. For a budget PCP, it is pretty sweet right out of the box.

@sat20387 10 ай бұрын

What about the hammer spring adjustment

@TylerHankss 2 жыл бұрын

Hi Angie. Does this .25 avenger do well with slugs? I know some barrels don’t fair well.

@AirgunProShopLLC 2 жыл бұрын

Yes, it does. I shot the JSB Knock Out slugs and made some beautiful head shots with them.

@richardcampbell5762 3 жыл бұрын

What was your shot count like? On your final set up? Thanks for sharing. Stay safe and stay blessed. 👍🇺🇲✌

@airgunangie17 3 жыл бұрын

I’m getting about 30 shots per fill.

@drekceldude 3 жыл бұрын

Think finding the pellet speed sweet spot is,usually with a diablo style pellet your looking between 850 to 880 fps,any faster mite have a chance of pellet spiral. I shot the JSB kings using my slug tune and was hitting 940fps and it was horrible,accuracy went out of the window,tuned down to 2100 psi and I hit my Avengers sweet spot for the JSB kings.

@V3g3t41987 3 жыл бұрын

but were they mark 2's? i find 950 fps quite nice.. last trip to the range i used an unregulated pcp slinging 31 grains 950 fps...golf ball groups at 100 my dude...maybe it was your ammo...maybe it was my ammo.. maybe you didnt lap and polish your barrel and have too much rifling causing a vortex at higher speeds. or maybe your hands just arent as steady as they could be...too many maybes here so ill sprinkle some for sure sauce on top...950 fps for sure is not unstable and i would argue its actually results in more stable groups than a lower velocity of say 850 fps at greater than 50 yards, and the reason for that is quite simple, less flight time equals less time for the wind to play around with your projectiles as well as significantly less bullet drop. there are many factors that go into an accurate group and something as small as the shape of your pellet, the slightest imperfections will result in wind resistance and friction pushing unevenly on and around your pellets/slug. your barrels twist rate most likely is why you dislike 950 fps..bottom line as long as you stay a safe distance from the sound barrier you can sail smoothly as long as your captain knows wtf hes doing.

@marcopothuizen 3 жыл бұрын

Nice voice lady. Even for me (as European-Dutch) not hard to understand what you are saying. Some people think we understand all dialects...we do not....

@airgunangie17 3 жыл бұрын

Glad to hear it! Thank you!

@j757under 3 жыл бұрын

Loved your video so informative. I was always trying to find what is the lowest possible settings on the regulator while still having a functional rifle.But can you tell me where was your hammer spring tension in relation to the (1200psi) reg settings.♡♡

@airgunangie17 3 жыл бұрын

Thank you, at 1,200 i left it at the factory setting.

@j757under 3 жыл бұрын

Do vibrations and bumps change your POI due to a lack of a barrel band? I know some people have complained about this happening

@AirgunProShopLLC 3 жыл бұрын

@@j757under I think so, I have a gauntlet .22 and a .25 and the .25 has a barrel Band and is a tad bit more accurate than the .22. So yes I think it does. Does yours not have a barrel band?

@j757under 3 жыл бұрын

@@AirgunProShopLLC haven't bought one as yet .its between that or a fortitude.

@mrhuntinjunkie 3 жыл бұрын

I'm trying to figure out how altering the hammer spring setting can impact air efficiency. Any thoughts?

@airgunangie17 3 жыл бұрын

It doesn’t affect air efficiency but increases the power while decreasing the reg setting.

@AM-hs4bz Жыл бұрын

I have a question I have the same gun, can I set my reg to 200bar and hummer spring all the way to the right to get maximum speed or it will damage the rifle

@Jeeper1378 4 ай бұрын

Wont damage it you will probably be wasting air.

@pqdrafael 3 жыл бұрын

Hello. I am in doubt about commemorating the Avenger 5.5 or New liberty 5.5 I want a pcp with myaxima autonomy for leisure shots up to 100m. what is the autonomy of each of them? which do you think is better and why? Thank you see you later.

@airgunangie17 3 жыл бұрын

I’ve not shot the liberty, so I can’t compare.

@ariamaguila8549 2 жыл бұрын

Why not increase hammer spring instead of increase reg pressure?

@lazermag 3 жыл бұрын

Was the hammer spring adjusted as well or left alone?

@AirgunProShopLLC 3 жыл бұрын

2 1/2 turns total.

@donaldotsig6818 Жыл бұрын

When you shoot it looks like moisture is comming out of your muzzel i live in a vert dry climate and never see that little puff of vapour on my pcp

@GeorgeMillington-zb9ej 8 ай бұрын

I bought the air Venturi avenger 25 caliber brand new on Amazon for $34 dollars I've never had a chance to shoot it

@willreasoner4384 Жыл бұрын

Good Video.... but you didn't talk about hammer spring adjustment...

@cheryl678 3 жыл бұрын

AA, Have you had any issues with zeroing the scope and then coming back the next day to find it shooting 6in high or low for no reason that I can find. I had a hawke scope (maybe the same one you have on your avenger) that I returned to the factory because the PIO would not stay zeroed in. It never went left or right just up and down about 6 to 8 in at 25 yards.

@airgunangie17 3 жыл бұрын

Nope, haven't had that issue. But surely that would suck! I'm going to say that was a rare lemon, Hawke has always been a reliable optic for me and I've used from the least expensive scope to the higher end ones.

@cheryl678 3 жыл бұрын

@@airgunangie17 Thanks for the reply back. Love the reviews and love the gun so far. Its my first venture into PCP and I'm having a blast hehe. I don't know what happened with my scope but they are taking care of it under warranty so hopefully I'll get a great scope back from them.

@airgunangie17 3 жыл бұрын

@@cheryl678 My pleasure, I appreciate you support! I hope the scope you get back is perfect! :) Happy and spot on shooting!

@mikenick4571 3 жыл бұрын

AirArmshuntingSA just put out a video about poi change issue and how to correct on this gun.

@daviddbf2691 3 жыл бұрын

Did you turn the hammer spring on your final setting

@airgunangie17 3 жыл бұрын

The last three Reg adjustments I turned the hammer spring, one turn the first two times, 1/2 turn the last time.

@markc3571 3 жыл бұрын

@@airgunangie17 When you turned the hammer spring, was that from the factory setting, or did you turn all the way in and then adjusted it?

@verdellparentaaawink268 Жыл бұрын

What was the hammer spring adjustment total with the regulator set to 2400....if I turn the hammer spring all the way out how many turns do I turn it in ..thanks.. I have no chronograph to go by

@karlhawley342 Жыл бұрын

hi I just got one of those but I see your video is two years old I'm wondering what a good scope would be for that rifle and what you used to air up your rifle? 🤔thank you

@AirgunProShopLLC Жыл бұрын

I like the Hawke Vantage line as the air rifle is deserving of a good scope. I use a JTS compressor that can fill to 4500PSI.

@karlhawley342 Жыл бұрын

@@AirgunProShopLLC thank you for the info, karl , Visalia ca.

@arm802 3 жыл бұрын

This is great, I have been looking for how to tune the 25cal. So your tune is 2400 on the reg and half a turn off of max on the hammer spring? How many shots do you get now? It is a bout 24 shots with it set to max.

@airgunangie17 3 жыл бұрын

Thank you! I’m getting about 30-35.

@joznew1 3 жыл бұрын

Hey Angie how many good shots do you get with the reg set at 2400 psi ?

@stevenelixson3784 3 жыл бұрын

Where did you have your hammer spring tension set while at 2400??? And how many shots where you getting per fill?? Great videos and info!!

@AirgunProShopLLC 3 жыл бұрын

Total turns 2 1/2 and I get about 30 shots per fill.

@stevenelixson3784 3 жыл бұрын

@@AirgunProShopLLC thanks..what's the most shots you've gotten out of it and at what setting?? Just for plinking with the kids!! I know cranked up pressure and hammer spring ain't gonna get many shots!!! lololol

@airgunangie17 3 жыл бұрын

@@stevenelixson3784 I didn't do a shot count at the time, it claims to get 110 shots at the lowest setting and to be honest with Covid and the shortages on almost everything I couldn't justify shooting off several hundred pellets. On the other hand if you're plinking and not really considering knock down power as to hunting, lower power will definitely give you more shots and that's less trips to the pump, tank or compressor. The reason I set mine like I did was because I was planning to hunt but at the same time didn't want to waste air that could give me more shots while in the woods. For plinking though, I would decrease the reg setting to about 2,000 and let it roll! I hope you have a great time plinking with you family! Happy and spot on shooting Sir!! :)

@stevenelixson3784 3 жыл бұрын

Thanks for info!!! I have noticed that mine shoots the crossman premier 14.3 hollow point very well , and here in southern Va you can find them on a pretty regular basis if you keep your eye open at Wally world!!! And at $6.24 a tin you can't beat that price for slinging lots of shots!!!

@airgunangie17 3 жыл бұрын

@@stevenelixson3784My pleasure! :)

@ceciltorres6906 3 жыл бұрын

Could you please help me out and tell me What is the weight of the pellets? Thanks

@airgunangie17 3 жыл бұрын

25 grain JSBs.

@usernamemykel 2 жыл бұрын

Not a word about setting the Hammer Spring???????????

@jamesvaldez2379 9 ай бұрын

If I back off my regulator from factory 3000 to 2400, do I need to adjust the hammer spring, if so how many complete turns do I need to go on hammer spring from all the way clockwise starting point, or if I go 2200? Great video explaining, just not sure on the hammer spring being there's no reading for it. My gun is a 25 cal. and firing JSB 25.39 gr.

@davidherer2278 3 жыл бұрын

Hello, if you have the 46 FPE with 2400 PSI, what is the autonomy ? How many shots for a tank with this setting ?

@AirgunProShopLLC 2 жыл бұрын

About 30 shots per fill.

@davidherer2278 2 жыл бұрын

@@AirgunProShopLLC Thank you very much for your answer

@ronaldsoohockchun9177 2 жыл бұрын

With that 25.39 grain pellet will it be able to drop a wildboar?

@knowledgeispower6092 Жыл бұрын

nah! even chicken will live.

@accuracyfreaks442 3 жыл бұрын

How many yards was your test done at?

@AirgunProShopLLC 3 жыл бұрын

40 yards

@melvinnewcomb6353 3 жыл бұрын

Where was the hammer spring set?

@AirgunProShopLLC 3 жыл бұрын

I turned the spring all the way in, then backed off 1 and 1/2 turns.

@terrynb12 3 жыл бұрын

Valving isn't that great in the avenger. I set my Huma regulator to 145 bar and achieve 53fpe in my Hatsan bullboss.

@davidberkley839 3 жыл бұрын

Nice job lol

@Theo-qn4kq Жыл бұрын

You are not changing the hammer spring. Think that is most important when tuning. It is about balancing?

@jeremyarnold1979 2 жыл бұрын

No hammer spring adjustment

@robertrmckerrow1111 3 жыл бұрын

Hammer spring adjustment?

@airgunangie17 3 жыл бұрын

2 1/2 turns total.

@robertrmckerrow1111 3 жыл бұрын

@@airgunangie17 thank you! 👍🏼

@javiermartines3606 Жыл бұрын

I killed two deer at 100 yards and when I returned home I filled it with air at 3500 and something broke inside and I took out all the pressure ,,, she has a number I would like to contact her to see if she can fix my avenger rifle.25