Power steering pump replacement - 2000 Buick Regal 3800 II (3.8L)

Рет қаралды 211,982

Күн бұрын

Replacing the power steering pump on a 2000 Buick Regal, with a 3800 Series 2 engine (3.8L). This video shows the removal and installation of the pump only...it does not include the fluid flush process after replacement.

Пікірлер: 80

@anthonywilson6611 6 ай бұрын

What a great video. No terrible music. Just thorough and to the point. Liked and subscribed!

@LH-zn3jg 2 жыл бұрын

The dowel pin trick was absolute golden. I was struggling, but once I fashioned a dowel pin to hang the pump it was get 'er done time!

@wirelesstesters1609 4 жыл бұрын

Best example of instructions I have ever seen. Thank you, Richard

@sunshinzonu 11 ай бұрын

Best how to video I've ever seen. Kinda wish I could hear some of the clanking with parts and tools. However it definitely beats the loud engine noise people be putting in the beginning of their videos. Thank you 🌟🌟🌟🌟🌟

@roberthoes9403 2 жыл бұрын

Thank you for being straight forward with this. Hard to find stuff like this

@benjamincole4716 2 жыл бұрын

This is a fantastic video, very simple and right o the point. Thank you so much sir we need more people like you

@nachosNipples 9 ай бұрын

Thank you for cutting the time and half, everythings covered in oil, i couldn't tell what goes to what

@charleslowe522 4 жыл бұрын

Thanks for taking time to record and upload. People like you make the world a better place.

@slaydrews_garage 6 жыл бұрын

thanks for the video it was straight forward and easy to understand. going to replace the power steering pump on my 1997 pontiac grand prix gtp supercharged 3800

@sean.g4516 2 жыл бұрын

Ha ikr same reason I came here lol

@krabenaldt7605 4 жыл бұрын

Great instructions. I have to do this on a 97 olds and was not looking forward to it. But now I know the procedure and don't have to guess where bolts are, etc.

@jfkdkslslee 2 жыл бұрын

Excellent! Good lighting. Nice camera placement. And the precious silence. If you ever republish the video, please add more arrows at the beginning (removal), like you did with the holding pin on installation. Still, one of the best.

@baileyjandy 3 жыл бұрын

Great video! When bolting ps pump back in, I used a bunji cord to suspend it so I wasn't fighting the weight of the pump when guiding the bolts in.

@raulescobar3881 4 жыл бұрын

Excellent video!!! quiet and to the point and includes the the nut/bolt sizes!

@e.j.mireles7843 5 жыл бұрын

Thanks for showing how to do that power Steering removal. Because I need to see how to do it

@d.4tay549 4 жыл бұрын

Thanks...l was not looking forward to doing this repair, but feeling more confident now.

@coreyclifton 7 жыл бұрын

great video for getting this done, Thanks

@johnnyboots327 7 жыл бұрын

Great video. Really appreciate you posting it.

@GreaseMonkeyFever 7 жыл бұрын

Thanks...hope it helped. Thanks for watching!

@slidefreak228 7 жыл бұрын

a little pricy for me but replacing the pump tomorrow and you're video was very detailed thank you

@raymondwagoner4896 6 жыл бұрын

I checked, it was like $199. I ordered a complete used pump from ebay for $38 plus free shipping..Came by USPS in 3 days, With pulley and reservoir ready to install.

@joshua125cr 3 жыл бұрын

Great video. Very thorough, without B.S.

@brianm1897 3 жыл бұрын

Thanks big help! I thought it was a lot more complicated.

@BLAKizLurKin 3 жыл бұрын

Yes I agree, this video shows and explain in good detail how to replace pump. Is there a video about pressure line installation of power steering pump

@mileytorres7331 3 жыл бұрын

Great video continue like this

@michaelmcmorrow5166 6 жыл бұрын

Always good to watch a pro with good tips! Still don't want to tackle this one!

@GreaseMonkeyFever 6 жыл бұрын

Believe me, I'm no pro! It's not too bad if you just take your time and concentrate on one thing at a time...don't look at the project as a whole. Before you know it, the job is done! If I can do it, so can you! Thanks for watching!

@tolfan4438 5 жыл бұрын

It's really just two bolts and two hoses you can do it

@dkeith45 4 жыл бұрын

Well, your video showed the most detail of the many I've watched trying to figure out my problem, but I still fail. I have the exact same kit, and did the reinstall the exact same way you show, but the pulley/shaft turns no matter what I do, and that ends up unscrewing the installer. : (

@TROBassGuitar Жыл бұрын

Thank God, I thought you were removing the strut/ shock at first lol

@ggonzalez3181 4 жыл бұрын

Thank you for your video and your time 👍👍👍👍👍🍺😎

@larrya703 7 жыл бұрын

Aside from the low pressure hose connecting to the reservoir, is there an accessible disconnect on the hose so I'm able to do a power steering fluid flush?

@alexanderrivera1927 4 жыл бұрын

Thank you very much kind Sir.

@williamward5642 5 жыл бұрын

Thanks made my life so easy, only a couple of hours

@GreaseMonkeyFever 5 жыл бұрын

Thanks, William. Glad it helped. Thanks for watching!

@eanestroy 5 жыл бұрын

Excellent

@tonloc789 2 жыл бұрын

Very good Video, "Right on point"

@GreaseMonkeyFever 2 жыл бұрын

Thanks, TonLoc...hope it help you get the job done. Thanks for watching!

@JLeosnow1 6 ай бұрын

Thanks for the “how to” video, much appreciated! Do you recall what size(Id) rubber hose to have handy to use for draining the pump? Thanks!

@joevald3 5 жыл бұрын

Very good anyone should watch this

@damiengotti7803 4 жыл бұрын

Dirty bay ? Well yeah the pump was leaking. Great video

@GreaseMonkeyFever 4 жыл бұрын

Yeah, this was the sister of a friends car, given to her as a car for college. Of course, they brought me the car right when she was leaving. Got a couple of vids out of it. Believe it or not, that thing is still running! Thanks for watching, Damien!

@robertthompson3548 2 жыл бұрын

2003 Buick LeSabre steering pump replacement video

@mattt198654321 5 жыл бұрын

GREAT video, but DAYYUM, that is one dirty engine bay

@zohn6969 Жыл бұрын

Bro thanks ❤

@stellalago5365 2 жыл бұрын

is it recommended to replace the reservoir as well when replacing the pump?

@wyrtwister4260 7 жыл бұрын

Good video ! :-) Wow , does that ever need a good de-greasing / cleaning ! God bless Wyr

@GreaseMonkeyFever 7 жыл бұрын

Yeah, what an understatement...lol! It was hard finding the nuts and bolts. I used a ton of GoJo hand cleaner whenever he brought that thing over...my girlfriend wouldn't let me in the house...and I usually had to eat dinner on my workbench! The young man who owned this drove the dog-snot out of it...I had to fix on it so he could give it to his sister going to college. Thanks for watching...and commenting!

@ortiztaxi1055 Ай бұрын

What size was the wrench that you used to hold the pulley inplace while you was taking it off with the socket?

@devinmorrison2751 5 жыл бұрын

So forsure flush after installing??

@nettirowley7721 7 жыл бұрын

How did you get the guide pin out?? Aside from that, great video.

@johnwagner4559 4 жыл бұрын

You pull it out. Come on.

@mushthepig 5 жыл бұрын

Somewhat related question: Do I need to pull the tire and splash guard off if I want to change the serpentine belt only?

@jeremylay1694 5 жыл бұрын

No you do not. Howver it is helpful to remove the coolant resivour

@Gazooo29 7 жыл бұрын

Hi, Do you have a video for filling & flushing the systen on the 3800 series.

@GreaseMonkeyFever 7 жыл бұрын

No, I sure don't. The guy who owned this car gave it to his sister about 6 months ago. I would've done one just to have a video on that!

@ThePs3ownsss 7 жыл бұрын

what if i wanted to do no ac and no ps what should i do

@aaroncrawley206 5 жыл бұрын

Well that was easy, would a 00 buick century be same

@slidefreak228 7 жыл бұрын

What is that wrench extension thing you used for the pulley bolts

@GreaseMonkeyFever 7 жыл бұрын

Tite-Reach...it's great for spots where you can't get a good swing on a ratchet. Their site is www.tite-reach.com

@zaytyga 7 жыл бұрын

when I saw that tool I instantly thought. I have to get that tool. is tight wrench the only website or brand they have that in?

@slidefreak228 7 жыл бұрын

zay tyga I only saw one on their website haven't been able to find another one. But a socket works just fine

@zaytyga 7 жыл бұрын

+slidefreak22 amen thank you sir. But that thing though lol

@slidefreak228 7 жыл бұрын

I know it looks so convient

@Breezy.Anderson 5 жыл бұрын

On this 2002 Monte Carlo there was a wire harness (single wire plug small) on the pump housing. When I pulled the pump out. I destroyed it 😭

@manuelcordova1027 Жыл бұрын

Did you figure out what it went to? I can't figure out where it goes, mine broke too

@patrickadams7586 2 жыл бұрын

Im having trouble with my bolts tighten up, making it to where my power steering pump is loose making the pulley wiggle and the serpentine belt comes off, any suggestions?

@MrPolomitch Жыл бұрын

You have to snug both bolts up before you tighten them both down, if you tighten one all of the way down the other bolt won't tighten up and it will be loose

@tameekamanning4934 3 жыл бұрын

Can you show how to put it back in....

@addicted2bass87 2 жыл бұрын

Has anyone done this on a supercharged car? The pump is ever more buried on those. Wondering if I will need to remove the supercharger snout to gain access.