HorsePower finishes up its '68 track car project. After a paint job, it's time for re-assembly and installation of gauges, fuel lines and misc. accessories. She'll be picture-perfect and road course-ready.
Пікірлер: 220
@SimpleLife19713 жыл бұрын
I can't even begin to image how nice it must be to assemble this Mustang with all new components, bolts, washers, and nuts everywhere!
@bilbobaggins47103 жыл бұрын
It be fun 😸
@3DPeter3 жыл бұрын
But my hair starts to raise whenever i see then drill or cut a hole and don't grind down the sharp edges and no primer, paint or sealer is being used to protect the bare metal.
@TheGeonam3 жыл бұрын
@@3DPeter Just yesterday I bought a 1965 mustang fastback with the pony interior. The guy who had the car had bought a 1967 Chevelle from me about 40 years ago. I found his for sale listing on craigslist where it had just been listed three hours before. The car was about 25 miles away from me so I shot over and checked it out. I had some good items that I was willing to offer plus $7000 and he took it. The car has all the new sheet metal, floor pans, rear quarters, front fenders everything accept the engine and trans. I am thrilled and have done four mustangs to this point plus I am certified in corvette restoration by Bloomington Gold Corvettes. I never thought I'd ever find a 65 fastback that was a good deal.
@jasonhull57123 жыл бұрын
@@TheGeonam love to see so videos of it up here on KZfaq. Even if it’s just some walk arounds and what not. Congratulations on the find my friend, and keep it in good order as they are getting harder and harder to find. 😔... American muscle is really changing now days.. 😳
@davidbarber20102 жыл бұрын
Right Ti nice to work with new components When. You have the money 💰 company s. Given the part s to build car 🚗 on the show. When have new parts all round you. Ti must be nice to work with new parts
@jameshutchins33963 жыл бұрын
Much better looking than I expected. Well done!
@amac90853 жыл бұрын
this is great and ALOT of intelligent wonderful details thank you for sharing great job guys and MORE to come
@MerlinOpeth3 жыл бұрын
Awesome job on the livery.
@conservativemike37683 жыл бұрын
The perfect endless hobby for those with OCD.
@islamsemo49023 жыл бұрын
Awesome job guys
@peterfeltham56123 ай бұрын
Beautiful job boys.An admirer from england.
@MrBlaser513 жыл бұрын
Just plain beautiful !!!!!!!!!!!!!!!!!!
@russellcardinal90743 жыл бұрын
Beautiful
@mikekerezsi96722 жыл бұрын
Love the color nice build
@nardaoeletronica3 жыл бұрын
Very good works .
@justindancer66132 жыл бұрын
That paint is all over the place
@stevenjennings83473 жыл бұрын
Awesome informational educational video experience Y'alls God Bless Ya 🙏
@borilopez85813 жыл бұрын
What a beautiful car
@jihanhamza72653 жыл бұрын
Its sick.....beautifull.. Everything is new..
@criticaluplink3 жыл бұрын
Fuel pump is 80g an hour to a 6lbs reducer to a carb. A bit overkill don’t you think. This is like having a water hose going into a bucket and sipping the water with a straw
@salilsingh6953 жыл бұрын
Amazing automobile engineering.
@JamieCarter-wv8rp7 ай бұрын
Beast car I ever owned was a 66 Mustand. Black on black. All original. Beautiful car.
@hotrodray68023 жыл бұрын
We always ran the coolant overflow tank into the frame rail OR properly onerboard so any water wont get under a tire and cause a crash. Also like the poly coolant that operates at low/zero pressure.
@perceive81593 жыл бұрын
A big pot of money to have all kinds of things and fun doing it! 😀
@waltermatheus2652 Жыл бұрын
Show .......! Parabéns a Equipe ! Bonito trabalho, esse Mustang ficou único !
@russellcardinal90743 жыл бұрын
Glad to see a Moroso system on this one, he was a great guy and friend.
@adamshields9647 Жыл бұрын
Beautiful car
@troytheriot86793 жыл бұрын
That looks one of those GET OUTTA MY WAY cars
@dirttdude3 жыл бұрын
that's a really nice red
@arikunarto74842 жыл бұрын
that Robert Redford can rebuild a car, amazing!
@BigUnitBeef3 жыл бұрын
Awesome
@yuwaraaj15643 жыл бұрын
What a beauty
@justrelaxing15012 жыл бұрын
My cable provider cut the free viewing of your program. Wow! that's a very beautiful car.
@brucegreg18593 жыл бұрын
All the holes drilled after paint should get a touch-up of prime and color to prevent rust creeping out later...Just sayin.
@gregsmith78093 жыл бұрын
@@Grunt49 Anything worth doing is worth doing right. Looks like a show car to me.
@monkeybarmonkeyman3 жыл бұрын
swab some axle grease on it before placing the grommets.
@max82863 жыл бұрын
saw same, thought same ... there´s the rusting base
@williamsizemore983 жыл бұрын
This car will probably never see rain.
@russcooke56712 жыл бұрын
@@williamsizemore98 it don’t have to rain there is moisture in the air. And it will oxides 👌🏴
@hotrodray68023 жыл бұрын
Reciprocating driveshaft. Cool.
@hectorocabrera3 жыл бұрын
Igual quedo impresionante
@refiii94993 жыл бұрын
I love this build. It’s a nasty ride.
@BM-wr7nx2 жыл бұрын
I can smell that paint job from here
@potchamadams25912 жыл бұрын
Good job💪👍🤑
@truckstreestoys3 жыл бұрын
All that work and still no cup holders
@Motorboss7776 ай бұрын
Cool👍
@sewerratt473 жыл бұрын
Bustin our bolts lol
@kiparisacog85343 жыл бұрын
Man it's sssooo clean.....I will not ride the car out of my home, if I have one, I'll put in the clean glass air-tight room, sealed with 32 carat gold. And just for eyes catching only.....😎😎😎
@Rosscoe853 жыл бұрын
This car is badass! Made me a little nervous when the kill switch tab was tacked and weren't wearing gloves. I kinda feel like some of the accessories were an after thought, drilling into fresh paint when everything could have been mocked up before and drilled/painted over right away to prevent rust from forming VERY quickly. But I digress it's still a kick ass car!
@nadeemwesson78352 жыл бұрын
g tptp
@HorrorUberAlles3 жыл бұрын
14:04 Oh wow I was not expecting Zakk Wylde, that's pretty cool of him to show up and help out!
@bilbobaggins47103 жыл бұрын
He's awesome
@IkhsanND Жыл бұрын
Das auto ist sehr wertig👍❤
@fw14213 жыл бұрын
Gorgeous paint scheme. Looks familiar to me. Like Parnelli Jones or maybe Dan Gurneys ride from the day....but I could be confused.
@markperry28273 жыл бұрын
I'll go the other way. That is pretty darn fugly.
@robda71953 жыл бұрын
I wouldn't be able to ignore the bare metal on the holes you drilled
@martinoettel12743 жыл бұрын
Lol...that was my 2nd though after watching...but those are the only stains on the white vest ;o)
@JimNichols3 жыл бұрын
That and the abysmal fuel line run. It was a really great 17:50 commercial for all the dealers that gave them parts for the plug.
@soundautomatic13 жыл бұрын
At 2:38 I can't stop thinking "you dated lasagna, twice?"
@miketheratbastard403 жыл бұрын
Wow! Ur gay
@soundautomatic13 жыл бұрын
@@miketheratbastard40 No, ur gay!!! I'm clever!
@kevincutway3 жыл бұрын
The drive shaft is not a “ RECIPRACATING MASS It’s “ ROTATING MASS “. There’s a huge difference , recipracating = is a forward then backward motion , like a hand saw would work . ROTATING MASS is just that , rotation . It goes around around around ! Just remember this about a light drive shaft .. you get the obvious weight reduction but what you lose is INERTIA . A heavier shaft will help with “ free rotation “ . Lighter shaft will still rotate freely of course but would stop its inertia rotation sooner than the heavier one..
@agungwest3702 жыл бұрын
Beautiful car race I like skin
@fordfairlane662dr3 жыл бұрын
To much madness
@byler3903 жыл бұрын
I would like to see all the receipts for this build.
@darkangelmexico2 жыл бұрын
probably they spent more money that you need to build a small but good house.
@byler3902 жыл бұрын
@@darkangelmexico i’m thinking 100-150k parts and labor, crazy
@allanlugo80953 жыл бұрын
Not a ford lover. But that is nice
@nevetslegasi56862 жыл бұрын
Recriprocating driveshafts?????? WHOA
@trevortrelfa75023 жыл бұрын
Actually, the driveshaft is rotating mass, like the flywheel, it has rotational inertia, not reciprocating mass like the pistons.
@tonypezza21903 жыл бұрын
Hey mike would like to see some 04 to 06 pontiac gto
@paulpaul56063 жыл бұрын
Should’ve got rid of the Leef Springs. I’ve got leaf spring on my wagon which a Horse tows
@maddog96593 жыл бұрын
lol @ less reciprocating mass with an aluminum driveshaft, since when do driveshafts reciprocate?
@frankieelder32103 жыл бұрын
About as often as my wife does........lol.
@matthewpeterson4305 Жыл бұрын
what happens when the overflow tank dump valve fails and dumps coolant/water on your front tire?
@craigjoseph93742 жыл бұрын
Where can the front and rear suspension be purchased?
@Early6663 жыл бұрын
Wait, was this the garage find mustang that was on Ebay a few weeks ago?
@TheZProtocol3 жыл бұрын
Link?
@bilbobaggins47103 жыл бұрын
No...this is an old show
@nabob143 жыл бұрын
This was filmed probably 10 years ago....
@MadRS3 жыл бұрын
What's the point of the shifter extension.?? The old bloke was miles away from the pedals and the yound guy firing the car up was slid all the way forward with his clutch leg extended as straight as it could. That seat needs to come about 6" forward.
@traceytschritter73172 жыл бұрын
Can you share with me the red paint the code for that please love that colour
@alitaati.13792 жыл бұрын
💎💎💎👏🏻
@acoow2 жыл бұрын
3:05 Drive shafts don't reciprocate.
@simon.houseaccount48073 жыл бұрын
Track cars are cool 😎
@toddcrookham5153 жыл бұрын
Surprised they went with a live axle, that was a clear performance compromise on the build! The 9" they used is better suited for straight line performance!
@guysumpthin2974 Жыл бұрын
Nope , depends on , weight torque…. There are many advantages to a live axle in some situations , try a pan car with ir = last place , daytona cup car , injected sprint cars , 1965 to 1970 mustangs vs 1965 to 1970 vets (many tracks , many years , so much proof ) better for tires , maintains alignment, more durable , typically less parasitic loss.
@jeffbaker6553 жыл бұрын
Did you run the cam in?
@bilbobaggins47103 жыл бұрын
???
@tybriggs98803 жыл бұрын
I would have gone with a ACI front end , could have eliminated those shock towers.
@lauriedooker10313 жыл бұрын
I seen this months ago and still waiting for the track stuff.?
@guns23173 жыл бұрын
This show actually aired YEARSSSSSS ago. Here is a follow up episode that says it has track time. www.powernationtv.com/episode/HP2010-05/mustang-track-car-on-course
@English2Elvish3 жыл бұрын
Curious on the 'cost to build' price for a machine like this.
@nicholask19852 жыл бұрын
Between $25k-$50k if I had to guess. The body is $17,500 no hood, no front quarter panels, and no front facia.
@josephlicata43043 жыл бұрын
Sorry if i missed it, but what organization and class is this going to run in?
@guns23173 жыл бұрын
www.powernationtv.com/episode/HP2010-05/mustang-track-car-on-course may find your answers there. This is over 8 years old.
@josephlicata43043 жыл бұрын
@@guns2317 thanks
@ggeneh71 Жыл бұрын
Can you add links to the components you installed?
@pablobracho6653 Жыл бұрын
Yo quiero ver un chevelle malibu1975 de 4 puertas en una modificacion asi como esa😅👍
@pacerodi3 жыл бұрын
You guys are getting me drunk on it! Lol! Indeed!
@NVRAMboi3 жыл бұрын
Joe Elmore!
@deavenhart85853 жыл бұрын
I got it
@bigears44263 жыл бұрын
One big add
@jamiemineer48793 жыл бұрын
Whoever told these guys this was a great paint scheme lied to them
@yashveersingh17952 жыл бұрын
🧡🤑
@bantau882 жыл бұрын
Wish I were handy
@bmstylee2 жыл бұрын
I always tell people if you can follow directions and not put your eye out when you pick up a screwdriver you can do a lot more than you think.
@adriankaill94132 жыл бұрын
Leaf springs...Christ they've not been used as suspension in UK since 18th century hay wagons...
@p4pking3932 жыл бұрын
16:38 white pin stripe no good
@kevinoertl7742 жыл бұрын
Blue would be a better color for the paint
@mikehunt68483 жыл бұрын
I'm sorry, but didn't you say you were giving it away?
@johnbowen29633 жыл бұрын
The drive shaft is rotating mass !!!!!!!!!!!!!!!!!!!!!
@davidsalazarlopez57843 жыл бұрын
Mejor que nuevo...
@lonnien.clifton11132 жыл бұрын
Candy apple
@mirdracing42862 жыл бұрын
You really going to leave that shifter set up in there?
@janbill792 жыл бұрын
who makes a 347 ci I had a 55 pontiac with a 347 ?
@lonnien.clifton11133 жыл бұрын
IT WOULD BE NICE IF IT WAS A STREETCAR
@jedclampett64663 жыл бұрын
Does anyone know what happened to Mitch Medford?
@shintot9703 жыл бұрын
who win this pony
@knunyabeasewhacks87442 жыл бұрын
Probably should treat those drilled holes with something.
@Raceydog3 жыл бұрын
Lock cylinders. There are no “tumblers” in car door locks. Just sayin.
@taurus663 жыл бұрын
fuel injected less headache and it runs better. The color why red? It’s to bright.
@deavenhart85853 жыл бұрын
What color red is that
@hotrodray68023 жыл бұрын
He named it.
@richardwilliams37883 жыл бұрын
Trinidad & Tobago Flag Colors
@Mr67Stanger2 жыл бұрын
Hmm, a non-collapsible steering column on a '68 car. Don't even want to think about a crash!...
@darinschlabach4923 жыл бұрын
I have never liked mustang. That's kinda nice.
@soulwagon12513 жыл бұрын
Personally I blame John Woodworth
@RCshortcorse3 жыл бұрын
How do I enter to win this baby?
@bilbobaggins47103 жыл бұрын
Old show
@ryanm30213 жыл бұрын
All this work and yet a super charged brz will beat it on a track