Practice these easy techniques to master your airbrushing!

Рет қаралды 8,052

Күн бұрын

How do you get even coverage with the airbrush?
How do you blend colours with the airbrush?
How to get control of the finest details?
Looking to elevate your airbrushing skills? Join us for a hands-on training session with Warrick as he shares simple yet effective techniques to master your airbrush, guiding you to achieve even coverage, seamless colour blending and total control over fine details.
Check out harderairbrush.com for our latest!
Whether you're a beginner or looking to refine your skills, this video is packed with valuable insights to help you gain better control over your airbrush.
With step-by-step guidance, Warrick demonstrates practical exercises designed to enhance your precision and mastery of the airbrush.
Follow along, and the improvements in your technique will empower you to bring your artistic visions to life with confidence.
Don't miss out on this opportunity to level up your airbrushing game and unlock your full creative potential. Start your journey towards becoming an airbrushing pro today!
Join us as we dive deep into these topics and provide valuable tips and tricks to elevate your airbrushing skills. Whether you're a beginner or a seasoned pro, this video has something for everyone. Don't miss out-watch now and take your airbrushing game to the next level!
00:00 Intro
01:07 Even coverage on a flat panel
06:20 The secret to colour blending
09:43 Point highlights and point details
11:57 Master the Dagger Stroke
13:09 The Flick Stroke
14:30 Practice Detail with the 0.45 ULTRA
16:38 Outro
17:09 Thanks For Watching!
From airbrushing techniques to equipment recommendations, troubleshooting tips, and everything in between, we've got you covered.
Our goal is to provide you with the knowledge and insights you need to enhance your airbrushing skills and overcome any challenges you may face.
Join us as we share practical advice, expert tips, and real-world examples to help you navigate the world of airbrushing with confidence. Whether you're a beginner or a seasoned artist, there's something for everyone in this Q&A video.
Have a question of your own? Leave it in the comments section below, and we'll make sure to address it in our next Q&A video, or even answer it immediately in the comments! Don't forget to like and subscribe to our channel for more informative content and exciting airbrushing tutorials.
Music:
epidemicsound.com
#airbrushing #airbrushpaint #harderandsteenbeck #airbrush

Пікірлер: 94

@jimmypratt6450 3 ай бұрын

Just getting back into airbrushing again after 12 years away and lost all my confidence with my brushes but i've bought the new 2024 evolution and i'm getting there again . The natural flow with an airbrush is in my experinance is the most satisfying moment in airbrushing . I'm not getting this at the moment but i remember years back airbrushing 2 o'clock in the morning creating some great Art which sold at a charity auction for good money . Hopefully your brushes will give me that feeling again 👌

@harderairbrush 3 ай бұрын

Jimmy we wish you the best brother! Keep us informed! And thanks for joining us 😊 W

@ashes2ashesuk 3 ай бұрын

Thanks for these Videos, Warwick, I feel so much more confident using my airbrush since you’ve been releasing them

@harderairbrush 3 ай бұрын

Ah that's great to hear - thanks. W

@christiangerard5830 3 ай бұрын

One week ago, I acquired the new Evolution 2024 at the EME 2024 at Lingen. My first trials with this new airbrush are extremely convincing! Since I am an aviation scale modeller, I have to spray free hand soft edged camouflage schemes, fine lines and small details with modelling paints. Even with old more tricky paints, like Xtracrylix, which normally tend to behave reluctantly while clogging the needle tip immediately, I am now able to create nicely defined lines without cleaning the needle tip every 30 seconds. The trigger now is constantly reacting at a fixed position. With new high quality paints, like MRP, Mr. Color, Elita Life Colors, Hataka Orange, etc., airbrushing sessions without any single interruption by clogging are now possible! It is a pure joy to work with this airbrush! Some of my friends now have or will order the Evolution 2024 soon and I plan to retrofit my older Evolutions and Infinities with the new 0.28mm needle.

@harderairbrush 3 ай бұрын

Thank you VERY much for this great comment! Really appreciate it and we are very happy that you have enjoyed our new Evolution so much! W

@louisliguore7199 3 ай бұрын

Great trigger control exercises! Thanks for taking the time to share them.

@Chulpichochos Ай бұрын

Hey Warrick, a while back you posted asking about tips about how to grow your channel. My spectrum ass has been dwelling on that since then. First, I wanna say that your content is amazing. Very helpful and I don’t even yet own an HS airbrush (I’m waiting to make the Infinity 24 my first). Second, it dawned on me that: - your videos only show up when you look for HS! - I’ve been following mini painting channels for a couple of years but never saw your channel until I manually searched for it after seeing a recommendation from Art Workshop airbrush art channel Point being - I think maybe if you edit your tags/descriptions to maximize reach via the algorithm to reach broad painters rather than just HS owners/people interested in HS. Like, I’ve learnt so much about airbrushing from you and your guests, I just want your channel to grow so other see it and we keep getting awesome content.

@harderairbrush Ай бұрын

Thanks so much for this really cool comment... We will definitely take a look at how we are selecting our tags... In the meantime, tell your friends! Thanks again buddy... W

@Thinkingshop 3 ай бұрын

These videos are great! Thank you for making this quality content. It’s fantastic to get back to fundamentals and see you killing it with good technique. Well done!🎉🏆

@harderairbrush 3 ай бұрын

Thank you! Glad you're enjoying them. W

@christiangruening352 3 ай бұрын

*starts the compressor, plugs in the Evo 2024* `ere we go lads. Strap in for the Saturday Morning Airbrush Show

@harderairbrush 3 ай бұрын

Haha thanks Christian. Hope it's helpful - let us know if anything was particularly useful! W

@dredfxcustompaint 3 ай бұрын

Great information for the beginner warrick

@harderairbrush 3 ай бұрын

Thanks Rob! Great beginner video on your channel too yesterday!

@dredfxcustompaint 3 ай бұрын

@@harderairbrush another one coming up today

@Godeater42 Ай бұрын

Where did that cutting mat come from please? Thanks and keep up the good work

@Kammmm 3 ай бұрын

Thank you for creating these videos! Your content is always a pleasure to watch. I am having fun with my new evolution 2024. What might cause paint to collect on the very end of the needle cap? I'm finding that paint is collecting there on occasion. Thank you in advance!

@onfloat17 3 ай бұрын

Great video and great tips! One thing when suggesting to listen carefully to the airbrush, maybe stop the music.

@harderairbrush 3 ай бұрын

Yes - good idea! Thanks for the note 😊

@nittneylion84 3 ай бұрын

Thanks for this. Will add to my learning curve ;)

@goforitpainting 3 ай бұрын

So cool. 👍

@romulopinto3644 3 ай бұрын

Cool techniques. well explained. Great video. 👍 👍 👍

@TD-ni9vk 3 ай бұрын

Always look forward to your videos. Thanks for the tips!

@harderairbrush 3 ай бұрын

Our pleasure - let us know if you found something particularly useful and it will helps us to know what to make in the future 💡 W

@paulsimmonds2030 3 ай бұрын

I love the content you are putting out. So much so, that I realised that I needed to up my airbrushing game. I purchased a very inexpensive airbrush and to be honest, it has some fine qualities that are usually found on more expensive airbrushes. Variable trigger tension, a rear screw for retarding the trigger travel, the ability to swap out paint cups and a self-centering needle housing. It atomises pretty good too. BUT FOR HOW LONG!! So, Warwick, your no-nonsense videos about all things Harder and Steenbeck sealed it for me. I knew it was time to invest in something that would never let me down. I read reviews on Iwata, Badger, Paasche, Sparmax and new kids on the block, Gaahleri. However, everything led me back to Harder and Steenbeck and, in turn, that led to the Infinity Cr Plus. Ok, I know looks aren’t everything, but if it were human, it would be oozing sex appeal! Should I start with the Ultra, progress to the Evo and then when my competency had advanced enough, go for the Infinity? Actually, no. I realised the Infinity has the ability to progress my skills from novice to expert built in to it. I am now the proud owner of the Infinity CR Plus 2-in-1. I have already completed my first project and it was like stepping from a Skoda to a Porsche! All I need now are the Teflon washers to do the quick fix for the slight trigger delay. I hope H&S manufacturer a genuine upgrade part for this. However, the quick fix works just fine. Thank you so much for your brilliant videos and tutorials.

@harderairbrush 3 ай бұрын

Hey Paul - thanks so much buddy - really appreciate it. Thanks for choosing to join us! With regard to the upgrades - once those are defined for the old model Infinity, I think we will ask @dredfxcustompaint to review them for us :-)

@eileencollins3126 3 ай бұрын

As always, great information! I airbrush my turned wooden bowls with Fiber Reactive Dyes, and am going to try the method you use for overlapping to do my fades. I am also going to see what I can do with making dots! Thank you very much for all the information you share. Time to get out my HS Ultra for the next session.

@harderairbrush 3 ай бұрын

Thanks for commenting Eileen - would love to see some of your work - perhaps you could post on IG and tag us? Thanks! W

@Ulthuan38 3 ай бұрын

I am very happy with my Evolution 2024 black Squidmar so far! I find it easy to paint my models and saved me time to get my army ready!

@harderairbrush 3 ай бұрын

Ah that’s great. I love to hear about people working their Squevo hard - it’s a beautiful airbrush but it’s still meant to work for a living 😊W

@KayakFishingCentral 3 ай бұрын

Another great video from you guys. Great tips delivered and perfectly presented. 👍

@harderairbrush 3 ай бұрын

Thanks buddy! W

@MrHrannsi 3 ай бұрын

Excellent as always, reminds me to get a scetchbook for practice work. My paint mule is now more paint than plastic.

@harderairbrush 3 ай бұрын

Any paper works well for practice really - even newspaper is fine. The point is that it's rather more forgiving as it is slightly absorbent, so it does help give a bit more encouragement than a non-porous surface when trying new things. W

@janettaselaar5673 3 ай бұрын

Awesome tips! Thanks for sharing!!!

@harderairbrush 3 ай бұрын

Hey our pleasure! Glad you liked them. W

@AndTheAnswerIs42 3 ай бұрын

I’ve been thinking of the trigger like the clutch in a car. That feel when the motor hooks in compared to when the paint starts to flow. You get used to the clutch like you get used to the brush trigger.

@harderairbrush 3 ай бұрын

And if that’s true then the Excenter is like a differential - the Ultra is nice and soft, up to the new Infinity which is like a limited slip racing diff so that you can do anything! 🤩

@chia-hungtai3728 3 ай бұрын

Actually Ultra 2024 is a wonderful tool to learn the muscle memory of trigger control. People can try to stop the trigger a little bit early than touched the collar to learn the muscle memory to those 4 settings. That is what I am practicing now. Those muscle memory can apply to all airbrushes. Just change the distance between airbrush and object with those trigger control for all airbrushes.

@harderairbrush 3 ай бұрын

THAT is a good tip actually! Thanks for sharing! W

@dwightatnorthernstar1820 3 ай бұрын

Yes, I do see and I also have done airbrushing model cars with the shaky method, Practicing the edge method does take practice. My house painter also airbrushed my house with this same method, and nor so messy and less tip dry, thanks......good tips for all......

@S.A.S.H. 3 ай бұрын

We humans are so tightly aligned to pattern recognition that my greatest weekend ritual (rituals are after all a satiation of our need for patterns) is Saturday morning coffee in my otherwise silent house and Warrick enlightening me to some aspect of airbrushing. My world, and welcome to it.

@S.A.S.H. 3 ай бұрын

Speaking of which, I guess I need a refill before I start this video.

@harderairbrush 3 ай бұрын

Thanks buddy. Hope it helps! We've got some really good content coming soon and a big announcement or two as well! W

@AndTheAnswerIs42 3 ай бұрын

@@harderairbrushDoes it maybe spell “(infinity)”? 😁

@paulhorak2812 3 ай бұрын

Another great video. I purchased the 2024 Evolution and wow what a nice airbrush. I had a upper line airbrush and I have to say the 2024 Evolution puts it to shame. Smooth, easy to clean and the work I have been doing is a lot better. Keep the learning videos comming

@harderairbrush 3 ай бұрын

Great to hear Paul! We are working hard to improve our airbrushes and I’m excited to talk soon about the Infinity! W

@chrtsi6912 3 ай бұрын

May i ask when spare parts for Ultra&Evo 2024 will be available for purchase?

@LordSquee 3 ай бұрын

Another fine video. The advice on layering for coverage is priceless for large panels. Once again super approachable and well explained. Always happy to catch your videos :)

@harderairbrush 3 ай бұрын

Thanks, your Lordship. Let me know if you find the dagger practice helpful for increasing control of the trigger... W

@LordSquee 3 ай бұрын

@@harderairbrushFear not, sir. When I master it there will be a regency for you, and a snazzy title.

@harderairbrush 3 ай бұрын

@@LordSquee haha brilliant can’t wait! W

@chaz01br 2 ай бұрын

Are there any interchangeable 0.3mm nozzles you can use with a H+S airbrush?

@kitbuilder3027 3 ай бұрын

Thank you for sharing your skills and expertise with the rest of us. Larry Landis

@harderairbrush 3 ай бұрын

Hey Larry - my pleasure buddy - thanks for watching! W

@musoseven8218 3 ай бұрын

Another great video, great tutorial, from the main man👍💜😊 I airbrush like I've used a spray gun (from time to time - plus I had mates in the trade who were painters), off - on - off of the work, following a 'wet' line. I even use a rattle can - with a handle - the same way. It shocked me seeing some KZfaqrs wobbling the airbrush around all over the place - is that to try and stop tip dry🤔😳😲🤔

@harderairbrush 3 ай бұрын

The wobbling is just an intuitive technique to try to get even coverage, I think. But the technical way is more of a guarantee for success. However, there is a technique in scale modelling which resembles the wobble, but isn't, and that's the technique of black basing and marbling on the base colour. Actually quite fascinating technique to achieve realistic finishes on military models and aircraft. Very cool. W

@musoseven8218 3 ай бұрын

@@harderairbrush Every day is a school day, I didn't know that. Perhaps a topic for an in-depth tutorial 🤔🤔💜✌️🤞

@kinwaiieong579 3 ай бұрын

Can newer parts of Ultra 2024 be used on older Ultra?

@nightlurker 3 ай бұрын

Thanks for another great video, Warwick, I really love your content, so instructive. Just one small comment, about the production, not the content of the video, when you want us to listen to the air flow (6.00), can you turn off the background music? It just makes it easier for us old fogies to hear. Too many rock concerts in my youth. 😁😁😎😎

@harderairbrush 3 ай бұрын

Hey buddy - that’s a really good point - thank you for that! Although I wasn’t aware that there was such a thing as “too many rock concerts”… 😎 W

@robertmcnamara1581 3 ай бұрын

Thank you for this one great tips to practice ! Can't wait to try them !

@harderairbrush 3 ай бұрын

Thanks Robert - let us know if they helped 😊 W

@robertmcnamara1581 3 ай бұрын

Hey quick question the dagger stroke seems like a great way to do a headlight lighting effect on models, could you do it in reverse ? So start at the point (the headlight) and work out and away to get the light dispersion ?

@harderairbrush 3 ай бұрын

@@robertmcnamara1581 that’s the very next technique in the video - the flick stroke 😊💡

@robertmcnamara1581 3 ай бұрын

Ahhh of course I'll just hold the brush a little further away from the model 😅 thank you !

@jonathaneka4591 3 ай бұрын

Hi, thanks for sharing exercises. May I know the book/sketchbook that was being used to demonstrate it?

@harderairbrush 3 ай бұрын

Hi Jonathan - gosh I can't remember! It's basically just a sketch book. Anything will do... W

@allanthgersen4908 3 ай бұрын

thanks for this lesson 😊 like i/we need more challenges in control of airbrushing (slight irony may acour) a small detail, what air pressure are you using ?

@harderairbrush 3 ай бұрын

Hey buddy - generally for most work other than specialised detail or texture, we use 25psi. W

@S.A.S.H. 3 ай бұрын

What cutting mat are you using there? I have use for one with the round base sizes printed on it like that.

@harderairbrush 3 ай бұрын

@VanguardTactics can you help us with this question? Thanks! W

@matthiasbruns8570 3 ай бұрын

Hi. I started with the ULTRA 2024 and mecha models. I am very happy with the results. But the model colors I have for the plastic models seem to work not so well on paper. Or at least my settings for model building do not translate so well. Which vallejo air paint, settings and paper do you recommend for practicing?

@harderairbrush 3 ай бұрын

If you’re using Vallejo just go for 1:1 with their thinner… if you want to paint for a really long time in paper, then mix the paint an hour before you use it and just let it sit. The thinner changes the base slightly and gives very nice flow.

@jackbrownii 3 ай бұрын

And now I need to go to the store and get some pads of paper to try this on.

@harderairbrush 3 ай бұрын

Newspaper works great in the meantime 💡

@moneywasher3139 2 ай бұрын

Produziert H&S nur für den englischsprachigen Raum oder warum finde ich kein einziges deutschsprachiges Video?! Eine Airbrush von H&S kommt mir daher nicht ins Haus.

@HilmarG93 3 ай бұрын

I finally got my compressor, and got to test my squidmar ultra! But I stopped under preparation, because i noticed that the airbrush is constantly leaking air through the needle. Is it supposed to be like this? I have never unassembled the airbrush.

@harderairbrush 3 ай бұрын

Hey buddy - just remove the quick disconnect tail, and then you'll see a small brass coloured screw under the airvalve - it fits a small flat blade screwdriver. Just tighten that up a little bit, and the problem will be over. You just need a little spring tension on the airvalve. Keep us informed! W

@HilmarG93 3 ай бұрын

Thanks for this! I tighten it quite a bit, feels like it can't go any further.. But it works quite well now, would say a very small air leakage every 2/5 times i press the trigger, otherwise its sealed. Thanks a lot for the help!! =)

@davidfahl9106 3 ай бұрын

What kind of paper are you using?

@harderairbrush 3 ай бұрын

Just a regular sketching/ watercolour block.

@Airbrushkid 3 ай бұрын

How much longer for the Infinity 2024? I want it.

@chrtsi6912 3 ай бұрын

Get in line, pal! 😁😁

@Airbrushkid 3 ай бұрын

@@chrtsi6912 There is no line.

@harderairbrush 3 ай бұрын

Hey buddy - very soon... certainly in the first half of the year. Thanks for your interest! W

@Airbrushkid 3 ай бұрын

@@harderairbrush I will believe it when I see it!

@harderairbrush 3 ай бұрын

I'm sure you will :-)

@carlstanford7607 3 ай бұрын

Now do it on a Miniature ;)

@harderairbrush 3 ай бұрын

Frequently 😊

@paulsimmonds2030 3 ай бұрын

There is one problem that I have and the reason I find it hard playing darts. I am left handed, but right eye dominant. It wasn’t until I picked up an airbrush to practice precision, that I realised the problem exists here as well. Hey ho. Not sure what the answer is .