Pre-Release Modular Engine Car Tutorial - Stormworks Experimental Branch

No video

Pre-Release Modular Engine Car Tutorial - Stormworks Experimental Branch

Рет қаралды 97,075

Күн бұрын

Join MrNJersey in this video where he covers a full tutorial of how to build a modular engine car from start to finish here in Stormworks Experimental Branch.
NJ Modular Engine Controller: steamcommunity...
-----------------------------------------------------------------------------------
MrNJersey Gaming Offical Discord Server: / discord
MrNJersey Gaming Merch Store: teespring.com/...
MrNJersey Twitter: / mrnjersey
MrNJersey Patreon Page: / mrnjersey
Join this channel to get access to perks:
/ @mrnjersey
-----------------------------------------------------------------------------------
Workstation & Gaming PC: www.amazon.co....
Audio Setup: www.amazon.co....
Please note that links above are affiliate links -- clicking them earns me a small commission if you make a purchase and helps support my KZfaq channel. Thank you!
-----------------------------------------------------------------------------------
Video Audio: KZfaq Audio Library
#MrNJersey #Stormworks #Tutorial

Пікірлер: 312

@Legoperson75 3 жыл бұрын

Oh this really changes up my understanding of mod engines. I always thought each cylinder needed a exhaust manifold attached to it. This vid was super informative and I think This will help make my radial mod engine designs much smaller.

@simon7325 3 жыл бұрын

Gearbox performance tutorial would be amazing !!!!!!! :))

@Hamsteren91 3 жыл бұрын

A gearbox tutorial? It only depends on direction to power. Arrows away from power you get more torque, and less rps. Arrows points toward power you get more rps and less torque.

@mathias6369 3 жыл бұрын

also the only difference between the gearboxes is max torque

@mrlootbox1936 3 жыл бұрын

@@Hamsteren91 I think he wants a tutorial on how to make a manual or an automatic gearbox.

@ALouisae 3 жыл бұрын

Or, a tutorial on whatever those numbers mean. I know the 1:-1 is reverse, but what does 6:5 mean? Or whatever the one with the 9 in it was, think it was 9:3? What do those mean? What do they do? Which ones are best for performance? Should I only use some if I want more torque and others if I want more RPS?

@Hamsteren91 3 жыл бұрын

@@ALouisae The numbers are gear ratios, nothing is best for performance or torque, it depends on the mass of the vehicle and the power of the engine, look at it this way. The ratios represents the speeds (R,1,2,3,4,5,6) of the gear box and depending on the direction of the box you can have more speed or more power. The trick is to know what your tallest/highest gear is, if the arrows are pointing away from engine then your tallest gear is 1:1 if the arrows are pointing towards the engine your tallest gear is now 3:1.

@cod_cape5483 3 жыл бұрын

Yes! Thanks NJ! This is gonna help a lot of people!

@FloofyRulezz 3 жыл бұрын

it indeed helped me

@sirnurtle657 3 жыл бұрын

this didn't work at all for me

@kez6611 2 жыл бұрын

No i dos not i have piratcopy so cant make Controler for engien

@sixbronze3726 3 жыл бұрын

Is that a supra?!

@Lukas-vs3bu 3 жыл бұрын

it's porsche 911

@GTAmaniac1 3 жыл бұрын

@@Lukas-vs3bu nah, it's a porsche swapped subaru because of the front engine and it's flat 6

@freakyparkourmouse 3 жыл бұрын

@@GTAmaniac1 no it's a H6 subaru

@toptencool368 Жыл бұрын

@@GTAmaniac1subaru use 4 flat

@patrickorr2256 7 ай бұрын

It's a mustang

@exr879 3 жыл бұрын

Many people say R stands for race mode. Some say it's Reverse But no it's *r e s e r v e*

@nottomsdiscontinuedchannel3710 3 жыл бұрын

Hi there...

@Olliwer 3 жыл бұрын

@General Shepherd some say it's r e t a r d s

@Brovioli 3 жыл бұрын

Sometimes you just gotta throw it in race mode going down the highway

@ihatehandles69 2 жыл бұрын

its actually reverse

@radudinescu1975 Жыл бұрын

it's actually reload if you never played CSGO

@champy5095 3 жыл бұрын

This helped me so much I didn’t knew that all the cylinders are all interconnected and not all separate

@MotorcycleMitchel 3 жыл бұрын

Nice last time i checked there was no microcontroler for the engines. Thats was the only thing i needed to make more vehicles with modular engines :)

@eroll2 2 жыл бұрын

i know this is old but i just bought this game and am loving these tutorials. though the videos would be half the length if he didnt say "im gonna put this here but you can put it anywhere you like" for every. single. piece. haha.

@vanguard2595 2 жыл бұрын

I do not know if it is just my game or this microcontroller is outdated, but when I try to connect my starter to the microcontroller it does not allow me to, and it only allows me to connect to the key as an external input (which does not start the car)

@tblsp 3 жыл бұрын

Looks awesome! Now you should try and built a 1/4 mile dragster. Would love to see how fast and efficient you can make it!

@stevepittman3770 3 жыл бұрын

Great work on that microcontroller, makes things a lot simpler.

@ronhebert3027 3 жыл бұрын

Great video, but that's a 4 speed transmission instead of 3. You can get the last gear by turning on both gearboxes together.

@Bassalicious 3 жыл бұрын

plus another 2 reverse speeds.. technically =)

@Ntgaming26 3 жыл бұрын

@@Bassalicious who the hell needs 2 reverse speeds?

@Bassalicious 3 жыл бұрын

@@Ntgaming26 I was just saying that this setup technically has 3 reverse speeds. Also the locomotive I recently built really does need the same gears forward and backwards.

@starshipteddy9871 Жыл бұрын

I'm leaving a comment to help you out as your videos are really useful! Thanks

@radziogadzio1105 3 жыл бұрын

You made me do some car. I was going to use modular engines but I didn’t know what I should do. I was going to ask for video like this and here it is. Thanks 😁

@Sir__Pumpkin1100 Жыл бұрын

any plans on updating this to follow the highly updated micro controller? its much more different than whats shown in this video

@Ma42435 8 ай бұрын

In the game have the presets

@Nicsmovies 3 жыл бұрын

Just saying it's a lot easier just running the electric radiator directly from a modular engine alternator, it works great and the radiator will run for a minute after you shut the engine off, further dissipating heat. Just a lot simpler option overall, thought I'd point it out

@MrNJersey 3 жыл бұрын

Thats only if you are using a alternator.

@reniyato9002 3 жыл бұрын

Id like to see another radar video, because every radar i ever used (workshop creations included) failed miserably and i dont know the reason.

@mrskywars1237 3 жыл бұрын

Radars are pretty broken as of now, my tip would be to try lowering the FOV the further your range is because the radar is too weak at a big FOV to see further than a little bit away

@lynxgaming7917 3 жыл бұрын

Just load a creation from the work shop or take NJs radar example and take there microcontroller.

@reniyato9002 3 жыл бұрын

@@lynxgaming7917 i did

@mrviking6892 3 жыл бұрын

Really helpful video, you sorted alot of stuff out for me. And i love the mc, its so much better than the others!

@gigachadgaming337 Жыл бұрын

finally something i can understand

@22tfortnitevevo 3 жыл бұрын

Why is the node that's supposed to be connected to the key button composite instead of on/off on the NJ engine controller?

@DavstrWrexham 3 жыл бұрын

Pleased with myself. I just done my first fully automatic gearbox :) It has Park, Reverse, Neutral and Drive. I have to admit, this game is good

@Bassalicious 3 жыл бұрын

Nice man! Does it reference rps, or speed? I've been struggling with an auto transmission on a tug boat that just doesn't work right any more once you're towing something. Needs more variables and tuning maybe.. But yeah, Stormworks is absolutely amazing. One of my all-time favourites, just for the engineering part alone.

@DavstrWrexham 3 жыл бұрын

@@Bassalicious It references engine rps and throttle. I then have the controller handle the actual engine throttle, engine starting, clutch and brakes (used for Park)

@Bassalicious 3 жыл бұрын

@@DavstrWrexham That's smart to have it unified with the engine controller. So does the input then work as a "set speed" type of deal? I set my tug up to be a "set prop torque" engine controller, might be worth taking inspiration from your design. =)

@DavstrWrexham 3 жыл бұрын

@@Bassalicious At the moment I just have a throttle like input from the seat. I do intend on doing a cruise control once I figure out how to do it.

@Bassalicious 3 жыл бұрын

@@DavstrWrexham If I didn't really want a "set torque" throttle a "set speed" throttle would probably solve my problems with my tug, but what would be the fun in taking the easy route, eh? I'd do a cruise control like this: Save the current speed then use that as set for a PID controller and let it control throttle once toggled.

@any1alive 5 ай бұрын

pro tip, if you only have 2 gears, name them high and low, and reverse so you can think of it as fast and low, and it makes mroe sence when using reverse alo

@Tiibero 3 жыл бұрын

When the modular engines update comes out release this to the whorkshop

@aleksander2810 3 жыл бұрын

Its up to you

@breadmeiser 3 жыл бұрын

Would be great to see a gearbox tutorial.

@kirilldmitriev6678 3 жыл бұрын

Your channel is really underrated but keep up the good work!

@nutsandy7183 3 жыл бұрын

I would really appreciate a gearbox controller tutorial please!

@Bassalicious 3 жыл бұрын

I've been struggling with an auto transmission on a tug boat. It works fine when you're not towing anything with a speed sensitive trigger and some hysteresis but as soon as you're towing it gets pretty difficult. I've tried to correlate between speed and rps but even with open office spreadsheets I haven't been able to tune it properly up until now. I just used a LUA script. Lazy and resource hungry but best for prototyping imo. Trial and error and research is a big part of Stormworks, it's half the fun. =)

@ameerbazzi8479 Жыл бұрын

@MrNJersey The updated MCU included in your description does not have a node for the key to start up the vehicle. Please give me a solution for this. Thank you!

@liamgyzen599 Жыл бұрын

you taught me a lot :)

@thatoneguy1406 2 жыл бұрын

Why doesn't this guy have a million subs yet?

@itsginger7671 3 жыл бұрын

When I saw this video I was so happy

@cod_cape5483 3 жыл бұрын

Also, I just tested this out, and following it block-by-block, the microcontroller seems to keep starting the engine, and it won't stay at the set rps, it just keeps dropping down. The only reason the engine is running is that the starter keeps running. It seems like an update to it broke it or something.

@Bassalicious 3 жыл бұрын

Did you verify your engine is put together properly has fuel, etc.? Sounds like the engine just doesn't want to run independently of the mc.

@H4PPY_23 3 жыл бұрын

same problem here

@cod_cape5483 3 жыл бұрын

@@Bassalicious yes I watched the video 3 times lol the way through and checked mine more times.

@cod_cape5483 3 жыл бұрын

@@H4PPY_23 good to know

@Bassalicious 3 жыл бұрын

@@cod_cape5483 So infinite fuel on or creative mode, electricity connected etc? Sometimes it's the simple stuff, no offence.

@theri9480 3 жыл бұрын

so i've followed both this and the other modular engine tutorial to the letter, but i can't even get my engine to even turn over, this is so frustrating

@annelia.724 2 жыл бұрын

thanks it helped me alot on understanding how to build a car

@manapotion1594 Жыл бұрын

This is meant to be the official game tutorial and you are suggesting to use some home-grown black box controller to build a basic vehicle. That says a lot about the design of this game.

@Cheese145b 2 жыл бұрын

It helped me alot i just subbed

@CETravelGames 3 жыл бұрын

time to figure out how to make the motor go to 3 seperate outputs, while making the engine small and light so it can fit in a vehicle that has to float

@IndieGameplayITA 3 жыл бұрын

you saved my life! Thank you!

@dientjegamer6943 3 жыл бұрын

Pls make a gearbox tutorial

@Bassalicious 3 жыл бұрын

Just switch off all other gearboxes than the one you selected. That's the easiest way.

@oprain 3 жыл бұрын

항상 감사합니다. 영상에 나온걸 따라만들고 조금 바꾼 수준이지만 모듈러 엔진을 사용할 수 있었습니다.

@RonnyCz 2 жыл бұрын

thank you super tutorial

@harryiscool8219 3 жыл бұрын

His tutorial vehicle works better than most of the vehicles I try to make that work well and look good

@Kp-jz4iw 3 жыл бұрын

THANK U FOT THE CONTROLLER!

@pauchara54 3 жыл бұрын

THANK YOU VERY MUCH!!!!!!!!

@paulperche9218 3 жыл бұрын

Hey I just found your channel and you are putting great work ! It's truly amazing. As you said in your video I can use some lesson about gearbox, I can't understand a shit about it. Thanks again

@Sh4quille0atmeal 3 жыл бұрын

My engine isnt starting. It's just cranking.

@nertas862 3 жыл бұрын

Try lower AFR value, my engine too cranked but I change AFR and it worked.

@cody-underwood 3 жыл бұрын

@@nertas862 what number did you lower it to

@nertas862 3 жыл бұрын

@@cody-underwood You need try, my engine have 9.1 AFR

@nertas862 3 жыл бұрын

@@cody-underwood 9.1 AFR but that was in late version you know, so now my only problem is cooling. Just search in workshop Modular Engine Microcontroler and try some of them.

@cody-underwood 3 жыл бұрын

@@nertas862 ok thanks

@rasmussipila7638 3 жыл бұрын

now i can build things in Stormworks!!

@mugisa4430 3 жыл бұрын

Pls do a series of this

@Exo294-zb7ee 6 ай бұрын

its the same link but it leads to a composite only wich means its not the same

@lizphelan7681 3 жыл бұрын

They should add a water distiller

@fluffyzuru6575 3 жыл бұрын

theres a different micro controller now and it doesnt work :/

@finnhoward9349 3 жыл бұрын

Big engine or small engine:me who just what’s to know how the frick this update works 👁👄👁

@Ollielab 3 жыл бұрын

GAMECHANGING AMAZING

@M3A1GreaseGun 3 жыл бұрын

it became a literal race car without gearboxes

@seanbellia1596 3 жыл бұрын

Thx homie

@tjstevenson67 3 жыл бұрын

Instead of clicking the item, and then clicking the inventory button to close the screen, you can just double click the item.

@insignia_real2464 3 жыл бұрын

lovee bro!

@CarsCumminsNCams 3 жыл бұрын

THANKS SOO MUCH MY DOOOOOOOOOOOOOOOOD

@c4vengineering 3 жыл бұрын

now i know how your mc works

@ya_boii_ 2 жыл бұрын

"Dark black" it makes me laugh

@pillow5486 26 күн бұрын

There is no seat throttle number output in the latest update of your microcontroller

@PUMPKIN.VR749 8 ай бұрын

Would it still work if we use the big engines? Like the “small engine.”? And not those kind?

@aegirosaurusichthyosaur541 2 жыл бұрын

I was hoping this was going to work. It did not work, I tried copying everything you did in the video but there were different input output configurations on your microcontroller than video. Please help.

@shrackgames 3 жыл бұрын

Another great video that helped me figure out how to build a car. However, its currently v1.0.33 and I do not have a modular engine, so half this video was useless to me.

@curtislong5879 3 жыл бұрын

Gear box tutorial would be nice

@minecraftidiot2231 3 жыл бұрын

make a jet ski or a plane next!

@DeepfriedChips 3 жыл бұрын

What’s with the fresh water new addition? And how do you get it? Edit: they did talk about adding fresh water made with distillation or else it would damage engines right?

@shadowgjhgitgjh2215 3 жыл бұрын

While I’ve not looked into it yet, how I interpreted the announcement was that fresh water is the water you get when you set a fluid container to spawn in with water and the sea water is what you pump out of the ocean, unsurprisingly. The fresh water straight out of spawn is fine to use in engines, but the sea water shouldn’t be used as coolant anymore as so many older boats relied on. Now you’re encouraged to pump the sea water through an intercooler to chill the coolant instead.

@Bassalicious 3 жыл бұрын

It's being tested on the experimental branch. Go to Stormworks' properties in steam, then Betas and select it from the drop-down to launch into experimental.

@_Funtime60 3 жыл бұрын

What is that cooling system! The pump isn't doing anything since it's not inline, or does stormworks not model that?

@SustainableGal 3 жыл бұрын

I'm waiting for modular electric drive chain with modular rotors, poles, magnets & modular battery's! With cells

@RCB-si1gt 3 жыл бұрын

cant find the "from key switch" when using the microcontroller. playing in the full release not sure if that affects things

@tomcartner9256 3 жыл бұрын

did you find a fix?

@RCB-si1gt 3 жыл бұрын

@@tomcartner9256 unfortunately no :/

@tomcartner9256 3 жыл бұрын

@@RCB-si1gt did you find a better tutorial?

@RCB-si1gt 3 жыл бұрын

@@tomcartner9256 unforchenetly no. yours was the only one I could find that did not leave my head spinning. I will just stick to the basics for now though. your tutorial did give me a good idea of what to do and how it works .

@Chris-zs5qb 2 жыл бұрын

How can I connect everything to the clutch via the logic tool. It's not allowing me to drag to the other parts. Please help.

@ArcherGoesBoom 3 жыл бұрын

This doesnt work it doesnt idle it just goes KLUNK KLUNK KLUNK KLUNK like it rises in rpms and then lowers like its trying to start

@Seeker_903 2 жыл бұрын

Dude this is so confusing bc you changed your microcontroller

@HwhatDaHyell Жыл бұрын

The modular engine controller you used in the video isn't the same as the one in the description. How am i supposed to follow the tutorial if we don't got the same things?? I'm confused

@raas7549 Жыл бұрын

same

@canmuratak Жыл бұрын

@@raas7549 no, it's not the same, it's normal in this video, but the v5 in the link

@raas7549 Жыл бұрын

@@canmuratak yeah i found that out when looking at all his uploaded workshop items

@holli6358 2 жыл бұрын

I’m using an electric engine but I can’t get the back wheels to move the engine the clutch everything will only hook up to one thing

@arnenikolaysen4796 3 жыл бұрын

I literally can't find that NJ thingy 16:48

@solarflare623 3 жыл бұрын

Who else is watching this after angle corner pipes were added?

@champy5095 3 жыл бұрын

The info I took from this video: Make your car out of PIPES

@mldkyt 3 жыл бұрын

first EDIT: I AM ACTUALLY FIRST (to comment on this video)

@handduken3112 3 жыл бұрын

@thundernlx 3 жыл бұрын

@FexMoppel Жыл бұрын

the link that you send is not the micro controller in the video

@user-hr2lk9ip6o 3 жыл бұрын

Sorry for asking but why I got different engine controller to the video in workshop when I click the link below？

@brandonloiacono2015 2 жыл бұрын

Wait... Did he just install an inverter instead of flipping the wheel? The buttons over your rotate buttons can be used to flip the piece before you place it.

@user-tc4lq9nc2i Жыл бұрын

My Car ist Not working

@Meltdown29 Жыл бұрын

Mine is saying too much fuel no matter what I put the AFR on... it's a flat 4.

@Exo294-zb7ee 6 ай бұрын

theres a diffrent microcontroller with diffrent logics on them i dont know what to do i just want my vehicle ive spended so much time on to work

@SuperNyaha 3 жыл бұрын

please make gearbox tutorial. for cars and for boats

@mA-pg4wu 2 жыл бұрын

12:43 wheels

@lilwhitecrow 2 жыл бұрын

Can you do a tutorial for something like an engine and gearbox for a tank?

@ulv9361 Жыл бұрын

i cant find the engine Controller and mode is not the same as in the video

@ViVidyeye 3 жыл бұрын

Your Modshop Micro controller doesnt have a Key Switch On/Off Input :(

@granat4659 Жыл бұрын

your new microcontroller the ecu v5 ( composite only) thats currently on workshop doesnt work with this video it has different data connections and isnt corresponding with your video

@MRgamermaxiboy Жыл бұрын

the NJ modular engine controllor is not in my part inventory what do i do

@connorlindy8738 3 жыл бұрын

I want to build more but am afraid my creations would be obsolete when they release modular engines. Are they keeping regular engines after modular release?

@annoyinglyfast5972 3 жыл бұрын

Yes, but if you use a water box for cooling then you will need to update to one of the heat exchangers that are going to be added.

@Peteboi64932 2 жыл бұрын

the microconroller hasn't key on input. help.

@christiansilveira9283 2 жыл бұрын

wasn't really helpful becuase i dont have the micro controller so i had no idea how to finish my car

@d.r.Pios6420 3 жыл бұрын

Make video about automatic gearbox

@zyygis 3 жыл бұрын

Would it be posible to create traction control or limit wheel spin for 2 wheel drive cars ?

@Adesterr 3 жыл бұрын

yes, use the torque meter and the linear speed sensor to check the ratio. if the ratio is going up, reduce the throttle, if its going down, reduce the brake.

@TomTomTom9146 3 жыл бұрын

The microcontroller says its getting too much fuel and when i check the engine its not getting fuel or air, the fan doesnt spin and the engine just keeps making the starting noise. i check all the pipes and connections. What's wrong?