Love the gold hardware. It's a good choice as it tries in the amber and will look great with the beautiful green-blue finish. As always beautiful work Brad!
@BradAngove6 ай бұрын
Thank you Garry
@bigkahuna1006 ай бұрын
I'm super excited to see the finished product, Brad!! It's scary how similar we went on hardware selections, but they were slightly different. I guess great minds do think alike!!! Cheers, brother!
@BradAngove6 ай бұрын
Haha indeed they often do. Thank you.
@SweetTGuitars6 ай бұрын
Looks great brother. I like the color you landed on way better than the beginning! Excellent as always!✌️&💙 The rail hammers are killer!
@BradAngove6 ай бұрын
Thank you Todd
@kyle96676 ай бұрын
I was thinking that gold would be the perfect colour for the guitar, and low and behold, you picked gold. Gonna look great.
@BradAngove6 ай бұрын
Cheers Kyle
@CyclopsGuitars86426 ай бұрын
That is a cool color front & back.Your guitar is gonna look wicked good with the gold hardware.
@BradAngove6 ай бұрын
Thank you
@landofahhs_16 ай бұрын
F I N A L L Y ! Love your choice of colors and finish as well as the gold hardware (very spiffy) 😊 My forte is electronics...I'd offer my services, but alas, I am happily retired. This has been a great, if "strung out" project, but as always all good things take time or as my dear Gramma used to say, "Rome wasn't built in a day!"
@BradAngove6 ай бұрын
Thanks Paul
@danandratis6 ай бұрын
I know the guitar was a kit, but when using gold hardware I think using the Evo gold fret wire really finishes the look! - Can't wait to see her done!
@BradAngove6 ай бұрын
Yeah that would be cool
@tabularasa77756 ай бұрын
Not usually a fan of gold hardware but this is going to contrast really well ...I'm following the build 👍
@jthonn6 ай бұрын
I think you did well with the electrics. It will be nice looking and it should sound great.
@BradAngove6 ай бұрын
Yeah it should definitely sound good. I love all these parts. I just done love assembling them haha.
@hollierthanthou836 ай бұрын
Pretty sure you could put the gold knob onto the switchcraft toggle switch. Otherwise, very nice hardware choices, going to look sexy
@johnjgibson68076 ай бұрын
Some Beautiful Products it’s really gonna Look and Sound Awesome 👍👍🎶🎶🎸
@BradAngove6 ай бұрын
Thank you John
@johnstitt26156 ай бұрын
Looking forward to the final demo for the sight and sound of it all. ✌️
@stuartbarker93736 ай бұрын
Looks like you've solved the interlacing problem.
@BradAngove6 ай бұрын
I have no idea what was going on there. I’ll have to do some more tests with more motion.
@jugheadjones54586 ай бұрын
I wish I had made a bet on gold. I would have won. I put gold hardware on deep burgundy-ish lacquer on my auction guitar and the gold is beautiful. Can’t wait to see it finished.
@BradAngove6 ай бұрын
Good on deep burgundy sounds like a great combination
@jugheadjones54586 ай бұрын
@@BradAngove I’ll send you a picture on Patreon.
@andysaucedo32266 ай бұрын
Awesome series Brad-as always. 👏🏻
@BradAngove6 ай бұрын
Thanks Andy
@TommySG16 ай бұрын
Hey Brad, I know gold hardware gets a bad wrap many times heh…. But honestly I think it looks awesome on a green guitar man ( It also looks great on black or white too imo ). Looking forward to the finished product, Babisch hardware is also off the hook too as long as you’re not looking for an OEM look. I never tried this brand on the Gibson style set up but I do have one on one of my Warmoth Tele’s and it’s a very nice bridge to say the least 🤙 Great choices man.
@BradAngove6 ай бұрын
Thanks Tommy
@johnstitt26156 ай бұрын
As for electrical. It is fun trying different components and wiring from scratch. Sometimes you get stuff like blade switches which are not the same in terms of lug assignment and have to troubleshoot. In the end no magic. The issues are simple in their cause even though the symptoms are complex. I usually get a bit annoyed and scratch the head at first then I remember my own statement about simple in cause, complex in symptom.
@docsiltanen6 ай бұрын
its going to be fantastic,...... PGK's are an absolutely amazing company to get kits from !!!
@johnstitt26156 ай бұрын
Yes....my PGK had.......perfect frets. I mean perfect. ✌️
@jadamdavisart6 ай бұрын
Beautiful guitar Brad! Are you still going to do a video of refinishing the tele body you showed briefly in a past video (a black burst red tele body), I have a similar one I'm going to refinish and I am really looking forward to that series. Keep up the great content!
@BradAngove6 ай бұрын
I think I still have the footage from that one. Did it a while back. I’ll check.
@davidmurray91936 ай бұрын
I glued wooden dowling rods into the pot holes, made a card template and drilled new holes for my obsidian to fit in, I Stripped my vintage 100 lp and made it work and in process of doing it with my coban guitar kit now, have subscribed and sorted notifications to alert me when you do a new vid.......not getting notifications ???????? Came across the video just
@BradAngove6 ай бұрын
KZfaq hasn’t been delivering my notifications properly for the past couple years at least. I don’t know why.
@davidmurray91936 ай бұрын
Not sure myself I have to keep looking out as I'm missing alot. Gives me an excuse to binge watch on a Sunday
@BradAngove6 ай бұрын
I hope you enjoy
@marksmith-hs9li6 ай бұрын
Hi Brad,I'm glad you're back, question have you ever put a Lp wraparound bridge on a telecaster body . Might be a interesting video.
@BradAngove6 ай бұрын
I haven’t. In order to do so you would need to either recess the bridge or raise the pickups and angle the neck.
@marksmith-hs9li6 ай бұрын
@@BradAngove true but a good idea,if you Google the late great Rick parfaitt you will see it on his telecaster and Francis Rossi 's guitar.
@JPibbs21986 ай бұрын
Just received my precision guitar kits LP today. Pretty happy overall but the "flame maple" neck i received for a $100 upcharge is a joke, as is the "flame maple" headstock veneer i selected. The one in your video is worlds more flamey. Also was surprised with the sloppiness of the routes as PGK is supposed to be known for everything being near perfect
@BradAngove6 ай бұрын
The routes on mine were fantastic. I’m surprised that yours weren’t. The wood is a bit of a different issue. I’m not sure how things go with flamed necks, but I suspect it would be tough to find neck pieces that flamed.
@LeviticusGuitar6 ай бұрын
hey brad! i was wondering if you could do an iceman guitar kit? that would be pretty awesome
@BradAngove6 ай бұрын
I might be able to do one eventually. I’ve got quite a backlog haha.
@jakebot900012 күн бұрын
In the middle of a precision kit build myself. Thanks for all the links. What truss rod cover did you use?
@BradAngove9 күн бұрын
I think I show that in the next one. It’s a custom cover sourced by the customer.
@mustangmodsecoboostgarage65396 ай бұрын
Hi Brad, I am very interested to see how this ends up. I got a similar kit from PGK. I am wondering which nut you went with? I was looking at Graphtech Tusq Nuts, but I could not find a preslotted one that matched the dimensions of the groove on the neck.
@BradAngove6 ай бұрын
That’s what I chose. A graph tech pre-slotted. If it’s a touch wide I will just sand it down a bit.
@Chagrin223Ай бұрын
So you're not gonna darken the headstock to match the body?
@BradAngoveАй бұрын
No, I’m not doing anything else to the headstock.
@nicopoppe48386 ай бұрын
Gold? Hahaha we waited like a year hahaha. All good. Only critique, you should put some aluminum-brass hardware (bridge) to do justice to the wood.
@BradAngove6 ай бұрын
It has definitely been a long wait haha
@RevGerryRM6 ай бұрын
Too dark. It looked good before you screwed with it again. Gold, 🤮