Visit the Wally Tools Website: www.wallyanalog.com PayPal MODAC Tip Jar: www.paypal.com/donate/?hosted... MODAC Patreon: / myowndevices
Пікірлер: 40
@marcusklingman3 ай бұрын
I have the Dr. Feickert Protractor Tool and love it.
@adotopp186518 күн бұрын
The key to properly aligning the cartridge is to get the best sound out of it.
@everTriumph15 күн бұрын
I shall still set my ant-skate the old way. Ortofon test record and oscilloscope monitoring the constant tone tracks. If one side mistracks adjust anti-skate to shift the tracking pressure until either the issue is corrected or it mistracks evenly. If it mistracks evenly increase tracking force until it behaves itself. Tweak to perfection.
@Trojan03042 ай бұрын
Sticking with my old protactor😊
@thebuxtstopshere2 ай бұрын
Makes sense.. Have traveled the same journey. Thx D
@bpalpha3 ай бұрын
I just picked up a Technics SL-B10 Turntable from a thrift store and this vid makes me glad its a p-mount cartridge! I'm actually waiting on a belt to see if the machine holds speed well. It was the first Technics record player I've found while thrifting.
@MashBill3 ай бұрын
Having a p-mount cartridge doesn't mean the cartridge will be properly aligned. It just means you will not be able to adjust it into correct alignment.....
@MODAC3 ай бұрын
It’s a budget Technics with a P-Mount. It is very limited. Thx.
@MashBill3 ай бұрын
I've setup hundreds of turntables and have always used (and had good results with) the Dennesen Soundtractor.
@JWD19923 ай бұрын
Regarding the comparison to a trip to the dentist, I can safely say that having wisdom teeth removed was less unpleasant than trying to align a cartridge. I actually understand all the concepts very well, but my hands are pathetic, so I cannot apply them correctly.
@Jammerk403 ай бұрын
I used the Stephenson cartridge setup and I feel like everything went well.
@restcarl833 ай бұрын
The business model of these type of companies should be based on providing RENTING options
@richardtaylor83633 ай бұрын
but the anti scate is always changing, depending on what part of the record side the stylus is so it is always a compromise.
@papoosee3 ай бұрын
I used to obsess over proper cartridge set up/alignment, but after realizing that all of this alignment philosophy is mostly theoretical and implicitly assumes an absolutely perfect pressing (not warped AT ALL, perfectly centered, etc) it really doesn’t matter because vinyl records are never perfect. Even the slightest warp, will throw off your VTA by magnitudes (think about how precise and small the changes we make to VTA or cartridge alignment and now imagine a edge warp or dish warp). Or imagine an off centered pressing (most records too) and how that affects anti-skate and stylus alignment. Of course, alignment matters, but not to this extent (unless your records are perfect). I just use simple tools to get it “close enough” and be done with it.
@Fluterra3 ай бұрын
Actually, it does matter, and proper setup makes a HUGE difference to sound quality. Don’t give up and get lazy.
@timessquarerecordscom14693 ай бұрын
I never use anti-skating Only time I miss it if the Record is warped
@ivansbacon3 ай бұрын
Unfortunately, for me, the Wally tools are not affordable.
@heifetz143 ай бұрын
If we bought them all it is the cost of a decent turntable or cartridge.
@obtainiumgaming44723 ай бұрын
The prices for the products is super high. I’m out.
@jedi-mic3 ай бұрын
Is there a measuring chart for knowing of for overhang? I can draw the angle must be something on the internet lothrum maybe, I'm repairing a turntable for a mate and he needs a decent mat what I'm going to make, I want to draw it on the mat so hes got a reference always. What null points distance did you use between the two and from spindle to first marking. Thanks
@MODAC3 ай бұрын
I'm not knowledgeable enough to answer questions like that. That's a question for JR.
@ChrisMag1003 ай бұрын
The Wally Tractor has Baerwald and Lofgren B alignment arcs. Baerwald nulls are 66mm and 129mm. Lofgren B are 70.3 and 116.6 mm. As far as overhang, it will vary depending on the pivot to spindle distance and the chosen alignment arc. It seems like Stevenson has the shortest overhang, then Baerwald, then Lofgren B.
@jedi-mic3 ай бұрын
@@ChrisMag100 I thought it said it was 120mm cheers
@joesugarman13553 ай бұрын
I dunno. I wonder if you would have had a much different opinion on the value of Wally Tools if you had actually spent more than $600 of your own money on this equipment. Seems like a heck of a lot of cash to shell out for something that could make cartridges sound marginally better (you didn't sound overwhelmed) but certainly not easier to set up. For that kind of money, I'd want something that would make setting up my cartridge far easier than the current chore it is AND contribute to a truly noticeable improvement in sound. Seems like this is a lot of work for a negligible improvement. And that lengthy text exchange looked ridiculous! No thanks.
@MODAC3 ай бұрын
@DG-ie5ip salesman? That’s not my job. I really like Wally Tools and JR is doing a tremendous job. If you really care about setting up your turntable properly, I can see no superior products or services.
@ChrisMag1003 ай бұрын
I’ve spent over $1500 on Wally Tools. When I’m setting up one of my 3 tables, or those belonging to friends, they make life so much easier.
@Coneman33 ай бұрын
JR is a good guy
@marijanecomingbacktoyou2 ай бұрын
🙄🤔no...use a old Vinyl with a stripe
@most-best3 ай бұрын
These tools are NOT a good investment because investments give a return equal or greater than the money invested. The return is assurance that a turntable is set up properly and that cannot possibly be worth $1000. Most of us will spend less than that on our turntable AND cartridge. These tools should be available for rent.
@most-best3 ай бұрын
I would pay $75 to rent this equipment for two weeks and do what I had to do to my turntable. It’s not worth buying unless you’re completely overtaken by audiomania.
@ChrisMag1003 ай бұрын
@@most-best I know of at least one audio society which owns a set which is available to its members.
@most-best3 ай бұрын
@@ChrisMag100Do you have contact information for that society?
@ChrisMag1003 ай бұрын
@@most-best You’d want to connect with one in your area.
@len95183 ай бұрын
Several excellent tables, do not have antiskate functions. The superb AR-XA, introduced in 1961, could track easily and cleanly, at 1 gram, on the hottest records, using a high compliance cartridge, such as the ADC-1. Most folks cannot hear the difference with various antiskate settings. As you indicated, a proper AB test is needed. You are likely hearing the placebo effect. I say this with due respect, as a subsciber. Careful use of the standard tools, will yield th eproper settings.
@geoffreydebrito26533 ай бұрын
I find your podcasts to be of value but with all due respect... I have a couple of constructive criticisms. They may seem inconsequential to your theme here but however subconscious the impact of them may be, they at the least detract from the legitimacy of your message. Properly setting up a turntable takes patience and precision and the items I'm pointing out call into question how faithfully you follow your own advice. First is the background which is cluttered (scattered items in the open closet) and the Magnepan's appear to be positioned haphazardly. Little things matter, especially so as the fidelity of our system increases. Secondly, the record on the turntable is heavily scratched and filthy... The obvious point being what good is a properly setup table when it is playing records in appalling condition? Using a clean record, closing the closet door and positioning the Magapans and camera angle such that it presents an ordered view could be easily accomplished. As things stand, the above leads me to wonder how consistent and faithful to your own advice you in fact are in practice. A case of do as I say not as I do? Your prior videos indicate that not to be the case but someone watching the channel for the first time might well come away with that impression. Again, this is offered as constructive criticism. I wouldn't offer this feedback if I didn't value your experience-based podcasts. Thank you for bringing attention to the Wally Tools, any greater ease of use and certainty of precision is welcome in the exacting hobby that is vinyl playback.
@MODAC3 ай бұрын
I don’t agree on any of your points. Thanks for watching, though.
@geoffreydebrito26533 ай бұрын
@@MODAC So much for "'Precision' meets Passion". Thank you for clarifying your position.
@sexytasmin3 ай бұрын
The correct term for anti-skating is BIAS. The control is a bias compensator!
@MODAC3 ай бұрын
Yes, I am aware...I believe I did mention bias at the beginning. Thx
@everTriumph15 күн бұрын
Either is correct. To avoid bias with my SME3009s2 I just fiddle with the dangly thing a bit.