Priming oil pump and pressure on BMW E36 M3 S50B32 after rebuild - AiM MXm dash
Рет қаралды 703
5 жыл бұрынRunning the motor on the starter to build oil pressure after a full rebuild. Using the AiM MXm dash to confirm oil pump is primed.
@luisrodriguez-rk1fl 2 ай бұрын
Which fuse did you pull out
@kanalnamn 4 жыл бұрын
Took longer than I expected. Perhaps this is something I should do when waking my car up after six months of winter.
@aussiedriver 4 жыл бұрын
Jörgen Pryss this priming took longer as the pump and oil channels were completely dry from the rebuild. If the oil pump could be primed without cranking the engine that’d be ideal, but not possible with this motor. Priming with the fuel pump disabled (fuse 20 removed) is the next best option.
Auto Info Group
Рет қаралды 99 М.
Fluid MotorUnion
Рет қаралды 556 М.
Серёга, Чтоб Вы поняли
Рет қаралды 3,4 МЛН
shaldins
Рет қаралды 240 М.