Printed Farms First Building ft. COBOD BOD 2 [In FLORIDA!!]

Рет қаралды 119,308

3 жыл бұрын

Printed farms is a construction start up that has recently purchased the first COBOD BOD 2 printer in America. This gantry style system has been seen in Europe and was used by Kamp C to build a 2 story demo house there. The same system is also being used to build another 2 story home in Germany and also a 5 unit apartment complex.
Submit a project I should feature!
automate.construction/upload/
Automate Construction Podcast
open.spotify.com/show/189kgzG...
Newsletter & Blog
automate.construction/
Write an Article for www.Automate.Construction
automate.construction/upload/
How I make money
Virtual Village - automate.construction/virtual...
“How to 3D Print a House” Course - automate.construction/course/
Book a Consulting Call - jarettgross.youcanbook.me/
MY EQUIPMENT
Camera - amzn.to/3NqPSMl
Vlog Mic - amzn.to/3OyrzO6
Podcast Mic - amzn.to/3udRTVF
Tripod - amzn.to/3bCNIw5
Japanese Handsaw - amzn.to/3bCNIw5
printedfarms.com
cobod.com
automate.construction
I got the unique opportunity to be on site as they began construction of their first building. The financier of the project decided their first build would be a 30x30 tractor shed. In Florida the hurricanes can have extremely high wind speeds. Fortunately the printed concrete is very sturdy with a strength over 5000 psi.
Although Printed Farms is a relatively new start up their founders Jim Ritter and Fredrik Wannius are not new to construction. Jim has financed construction projects across a range of uses and realized in that process how inefficient traditional construction models can be. Many of these struggles relate to organizing the large team of people that it takes to construct a building especially with the ongoing shortage of manual labor in many regions. Reducing manpower needed for the job is only a small part of the benefits realized with 3D printed construction technology. Data is everything and when you have a BOD 2 system plugged into a laptop onsite you have full control of the project at your fingertips.
The printer is equipped with various sensors to improve ease of use but it still requires some training to operate. If the ground or slab that you’re printing on is uneven, the BOD 2 is able to compensate for those irregularities, there is also a sensor in the extruder portion of the printer that alerts the concrete pump to send more through the hose. Generally the COBOD team would come out to train the print operator in person but due to typical 2020 complications the training process was completed online. Fredrik has become very competent with the massive 3D printer and feels like the online training was very good although he still collaborates with the COBOD team if he has any questions.
Printing outside exposed to the elements was a substantial feat achieved in this build. Many projects have needed protective tents surrounding them in order to maintain specific temperatures and humidity. When you need to build a temporary structure around an entire construction site things start to get expensive with the current solutions. Floridas natural climate allowed for this project to be completed outside.
Printed Farms has many fascinating projects in the pipeline that Fredrik discusses in the video. Although most of the printing is currently experimental, 3D printing in construction is at a transformative stage and soon its products will become consumer facing.
Apple Podcasts
podcasts.apple.com/us/podcast...
Google Podcasts
www.google.com/podcasts?feed=...
Spotify
open.spotify.com/show/189kgzG...
Anchor
anchor.fm/jarett-gross
Breaker
www.breaker.audio/automated-c...
Radio Public
radiopublic.com/automated-con...

Пікірлер: 238

@kensolar69 3 жыл бұрын

This is a technology in it's infancy. I worked on the x-y coordinate plotter system 45-50 years ago and we have that down pat. Using it for 3d printing is going to change things in a major way. To many, this looks slow and a little crude, but these are pioneers you're watching. What they do and learn today will lead to much more refined and advanced models and techniques in the coming years. 10-12 years from now they'll be building apartments and entire neighborhoods with a quality and speed considered a dream today.

@automateconstruction 3 жыл бұрын

Yes! So many don’t understand this!

@mim7568 3 жыл бұрын

I got in touch with Fredrick and hopefully in a year or so we will be able to print house for us in Florida. I'm glad we postponed the building. Will see how it works out financially comparing to traditional build.

@chrismcbee2933 3 жыл бұрын

This is the technology that will really help humanity. Use it for good.

@okiedokie99 3 жыл бұрын

Our family is making the move to FL soon on a large 60+ acres property. Hoping to get a large 3d printed home 🏡 🙏 if the tech is there within 2 yrs. Will definitely be in contact with his company in the future. Thanks for this video man!! So much good info to process in this video. Prices will be even better without having to tent a project, awesome.

@t3kil4t3x 3 жыл бұрын

Wow a brick layer man with a shirt and sunglasses working from him laptop. That's the future, i will invest in it.

@laticrete 3 жыл бұрын

We're honored to be a part of this project!

@bayan6325 3 жыл бұрын

any jobs?

@johnnyoneye2641 3 жыл бұрын

@@bayan6325 this machine will make jobs unnecessary

@jasonupchurch4121 3 жыл бұрын

Has hemp crete been tested in these printers. I have been curious about it's use with 3D print technology because of it's strength.

@sheeladhvajsingh7712 3 жыл бұрын

@@johnnyoneye2641 😂😂😂

@ThumperThumper-uo9oo 3 жыл бұрын

This honestly I believe will be the future of building homes and so much more. Costal areas and places where high winds or fire and the like will greatly improve. Imagine all the homes saved from say hurricane damage or wild fires like those in california & oregon . No more termite damage also . Plus all the trees we save across the planet so cleaner Air . I pray this catches on with many states and across the planet.

@rogermccaslin5963 3 жыл бұрын

While I find this tech interesting, I don't think that is all that much more in terms of longevity or protective measures. My house, about 10 miles from Lake Worth, FL (where I assume this building was done based on the video) was built in 1959. I'm about 1/2 mile from the ocean. It has been through multiple hurricanes without any significant damage. I don't have any termites. It is made with concrete block construction and has a typical wood truss roofing system. As for cleaner air, I wouldn't be so sure about that. Look into cement manufacturing. It is not exactly the cleanest industry. From what I understand, most building limber is actually farm grown and considered sustainable. The biggest value I can see with this process is labor savings but that doesn't necessarily translate into more affordable homes. We can hope it does but time will tell on that.

@ARMENAMERIKANE 3 жыл бұрын

this is awesome definitely the future of construction tech

@mebeasensei 3 жыл бұрын

How come...? There is no steel reinforcement! It looks nice. The tech is impressive...but don't be blind about the strength. How will it go in an earthquake?

@printedfarms443 3 жыл бұрын

@@mebeasensei We have reinforcement and material is 9000 psi.

@riftalope 3 жыл бұрын

They should also brag that the entire unit fits on one longbed semi truck trailer. AND thermal insulating foamcrete can be used as the fill. Also a thermal stand-off wall can be put into the print design, stabilized with holding wires.

@skjames09 3 жыл бұрын

Thanks for the video and detailed explanation.

@automateconstruction 3 жыл бұрын

More coming

@seandees3028 3 жыл бұрын

I've worked in construction, and I have the crippling injuries to live with for the rest of my life. Being in the US, there is no compensation for that. I love the idea of automated construction. It will reduce the number of people like me in the world.

@heartobefelt 3 жыл бұрын

Yes , we kill our body to make a living ..... then when we can afford to retire we have too many injuries

@cpincpersonal 3 жыл бұрын

As a South Florida resident who works in technology, I am very interested in this field. I'm amazed at how awesome that building came out. From the front it looks almost like a newly built fire department. The smooth curved walls look amazing and I like how the side door can swing out and extend all the way. Very cool roof construction as well. 10/10! Can't wait to see what you both have lined up next.

@TheRetirementality 3 жыл бұрын

I'm so interested in this technology. I want to get in this game while it is early.

@ldmnk3493 3 жыл бұрын

What do u do now

@TheRetirementality 3 жыл бұрын

@@ldmnk3493 I'm a huge KZfaq star. Oh, you mean for money. I'm a Realtor, and I have rental properties.

@printedfarms443 3 жыл бұрын

Hi, contact us from our webpage or instagram

@tejassurve7975 3 жыл бұрын

@@TheRetirementality liked for the sarcasm.

@lucavilleneuve6392 3 жыл бұрын

@jbsugarpop 3 жыл бұрын

Excellent work!! 3D Printing will, and is changing the world big time. Thank you.

@williamembry5717 Жыл бұрын

Great video, good info. This one answered a lot of my questions. Thanks

@krishields2 3 жыл бұрын

The next step is continuous mesh embedment..... And auto-trowel Not particularly hard to make an attachment for those two, but much better results in strength and appearance long term. Remember, you heard it here first! lol.

@JLOFlix 2 жыл бұрын

Great video! Thanks for sharing!! Fascinating process!

@JLOFlix 2 жыл бұрын

I would LOVE to learn this process! Better yet, I NEED to learn it

@mrbigolnuts3041 3 жыл бұрын

Blue Polo and blue shades, this man means business.

@printedfarms443 3 жыл бұрын

@cabocloxish507 3 жыл бұрын

Awesome!

@Louislegrand1 3 жыл бұрын

Wonderful. We want it in Montreal area

@LitleBill07 3 жыл бұрын

Where can I invest

@gustavoguido9552 Жыл бұрын

I'm very interested in this technology. This is the future of building. It has so many benefits. I've been in the construction industry for 25 years. I live in Houston, Tx. As we all know, labor and material has gone through the roof. This technology will improve the housing, and commercial industry. Very impressed, I would like to know how to get involved.

@seanmichaelnugent1 3 жыл бұрын

great video bro!!!! congrats on getting down there!!!!! looking forward to speaking more about the project! Sean Nugent Forward Design Buildings

@MichaelFlynn0 3 жыл бұрын

11.21 - The last major industry that is not automated ... Bang !

@eurovisie2010 3 жыл бұрын

prefab looks better to me. Just build the walls inside a plant. And then place than fast with windows, etc.. ready installed on site together.. These slurry walls have to worked on on the inside and the outside after printing.. It's a mess.. !

@MichaelFlynn0 2 жыл бұрын

@@eurovisie2010 - well let's wait until the first fire goes through shall we ... or a hurricane ...or a bunch of white-ants gets into the bottom plate, or a horse kicks the wall .... I could go on. Lightweight construction methods are great if you want it cheap and fast ... but serious people build with concrete. The reason it is a 'mess' is because manufacturing with robotics, on site, has just been invented.

@owenfessick5774 3 жыл бұрын

This is insane!!

@stevenlight5006 3 жыл бұрын

So far that dicribs the progress

@zackarasyd2493 3 жыл бұрын

Thank you for sharing. I look forward to see 3D high rise condominium soon.

@cartlox2862 2 жыл бұрын

I'm here in Australia and I'd love to get into this and turn the building trade on its head the cost here to build homes is way pass gone crazy . With a quick or rough guess how much would it cost to start up for a owner and operator.

@nianyang4727 3 жыл бұрын

so good,l want one

@billstark682 3 жыл бұрын

As much as I love 3D printing, I have a small print farm and work in the concrete business as well. I still believe converting a concrete boom pump to run on Gcode would be far superior, to any of these gantry set ups.

@huesenpaul1394 3 жыл бұрын

Do you know how to 3D print model homes ? Like a 3D printer that can 3D print a house but in model form.

@wat3rdog25 3 жыл бұрын

I would like to see someone take a sledgehammer to a section once cured. Cut into it with a saw and drill through the material. How does it react and hold up. How does it perform in the desert? This is very neat

@printedfarms443 3 жыл бұрын

9000 psi after 28 days.

@wat3rdog25 3 жыл бұрын

@@printedfarms443 very impressive.

@fadlimuhammad3811 3 жыл бұрын

Good luck next guys we suggest build building industrys next movement made 3D taller cranes

@sinebar 3 жыл бұрын

Do they have to pour those concrete support pads or did they bring them in and just place them there?

@PimptatoPCs 3 жыл бұрын

Hi Jarett. I'm writing a college paper about 3D printed structures and so far it has been impossible to find R-values or even generic energy numbers for any type of 3D printed walls. I know this is a very competitive space right now for all the various companies, but they don't seem to be publishing anything concerning the energy efficiency of the envelope. Do you know of any resources that could help me with R-values, or things like vapor migration and permeability? I can't even find stats for seismic ratings or wind loads. Is it just too early in the development process to expect these things? Thank you for any insight or information that you can provide.

@automateconstruction 3 жыл бұрын

The R value of the printed wall itself is quite low, essentially negligible. You can achieve any insulation desired with foam inserts spray foam or a particle based insulation. For your paper I would simply research the best insulation methods for your desired climate and assess the viability of using those products on a printed building. I would be happy to discuss this further and even potentially make a video out of it in the future. Insulation is an important aspect of implementing this tech. Feel free to email further question to jarett@3dprinted.construction

@sikosis999 3 жыл бұрын

hahaha because they have none :)

@robertfoedisch9322 3 жыл бұрын

Can you design and program for electrical., hvac, plumbing etc ?

@williamrager1610 3 жыл бұрын

Penn State has been 3D printing in the USA for over 8 years with a Duo 2000. NASA even had them print a sample habit for Mars. Army Corp of Engineers build a B-hut in 2017.

@davenesbitt7716 3 жыл бұрын

How long does the setup take, ie building the support blocks for the printer frame legs??

@alejoswp 3 жыл бұрын

hi, i love C3D , what are those metal wires you put between? can i work for you?

@nightlightabcd 3 жыл бұрын

is the foundations for the 3D printer also 3D printed? This is great stuff! is the future of construction? The walls look rather sloppy and the electrical sockets are too high from the floor! I think this would be great for a barn! Interesting concept indeed!

@glenseigers3917 3 жыл бұрын

Print a benchy whit it xD

@automateconstruction 3 жыл бұрын

If this comment gets 100 likes I’ll try and get a company to do a video printing a benchy!

@ericadams5019 3 жыл бұрын

@@automateconstructionAwesome machine. I have 2 FDM and a resin printer. I thought my 400x400x400mm was big. :) How deep in the ground can this print? IE Basement walls...

@automateconstruction 3 жыл бұрын

@@ericadams5019 I haven't seen a basement printed yet, it may have to be done offsite. I'm sure we will see it one day.

@tommycollier9172 3 жыл бұрын

This is great technology and I feel certain this is the future oh, but I can build a pier and beam pole barn 30 x 30 in 3 days

@rrudydedogg3779 3 жыл бұрын

This method of "building" has so much promise but it seems slow. Why not include a second (or even a third) moveable "printer" so more areas of the structure could be worked on simultaneously? It would be interesting to see a community of these homes/structures built and finished along with cost and time to construct information.

@automateconstruction 3 жыл бұрын

All in good time

@RightDirection1 3 жыл бұрын

Who do we contact to build 3D homes in Cental Florida (Polk County) ?

@printedfarms443 3 жыл бұрын

Please contact us from our webpage or instagram - Printed Farms

@westleywest7259 3 жыл бұрын

Will you have an IPO at any time?

@12vLife 3 жыл бұрын

Congrats. This is awesome! That thing is insanely big. I would like a modern, open concept, no drywall, no interior doors, flat pitched roof and exposed plumbing and electrical in my next Central Florida house. Print the house, print my perimeter fence and print my driveway and patio.

@wgreiter 3 жыл бұрын

It should also print the dog, doghouse and a shiny sun on a cloudy day... while were at it, let's print an electrician that works for $20/hr instead of $90/hr. On second thought let's just bypass all the middlemen and busy work altogether and have it print money. Building in the future will "cost" less but "sell" for just as much, probably more.

@tommynorcali2137 3 жыл бұрын

I can see this really being a big asset to California housing and not so much in rainy climates. California has earthquake standards to be met in construction . Is there a square foot cost average ?

@alamsjahhalim2590 3 жыл бұрын

Can this building withstand earthquake ? How many ...... Ritcher magnitude scale this printer building standard ?

@mite94 3 жыл бұрын

It's quite interesting the notice that the operator at 12:18 is claiming to be moving at 50 cm per second while the machine seems move much slower. Just by looking at the distance it is moving of about 1 meter takes roughly 8 seconds..... I can's see a machine with such an interia move at those speeds. Printing 30 cm per day is like stacking lego bricks on top of each other instead of having 1 unified structure how does that affect the structural intergraty of the walls?

@automateconstruction 3 жыл бұрын

I believe he’s referencing capability not current speed and as discussed the pump limits the speed. Pumps in Europe are stronger and allow the machine to print faster.

@coronachan3250 3 жыл бұрын

He said 15cm per second.

@mite94 3 жыл бұрын

@@coronachan3250 That actually makes more sense, thanks!

@quikxfl 3 жыл бұрын

Even with the speed the labor cost once scaled is reduced dramatically

@OllieKubrick1 3 жыл бұрын

I noticed in the video that there is minimal metal reinforcement (only very thin bar, laterally placed every 5 layers or so). How can one be sure that this is enough for long term structural strength? Does the concrete mix have fiber in it? Is there something else which allows such minimal reinforcement?

@automateconstruction 3 жыл бұрын

Also vertical cells filled with rebar.

@djirate052380 2 жыл бұрын

This is a great step towards sustainability and a moneyless society!

@Gio-kh2be 3 жыл бұрын

I would like to invest into this

@everlasting1154 3 жыл бұрын

That was going to be my question. How do we invest?

@alejoswp 3 жыл бұрын

im also looking to invest in this, there are 1-2 trading firms managing index funds that just started to invest in various c3d companies ✌🏿still too early but it will be interesting

@irmakerdem5461 3 жыл бұрын

@@everlasting1154 0pö

@adminsuperheroconsultingll6890 3 жыл бұрын

Me 2!!

@joeschlotthauer840 3 жыл бұрын

I think setup time is the major drawback, and it looks like a crane was needed to move the equipment...

@automateconstruction 3 жыл бұрын

There will always be room for improvement for the next couple decades at least.

@TexasDronePilot 3 жыл бұрын

Here in Texas homes are built quicker than it would take to get those footings prepared and the equipment set up. The cost of moving all the equipment to and from the job site has to be figured into the cost of construction. I'm sure each day you have to spend a few hours setting up all the equipment to do the job before you start and at the end a few hours cleaning it. I could see something like this being cost-effective if you were building a whole neighborhood and the system was on rails, wheels, or belt tracks and it never had to stop beside for maintenance.

@joeschlotthauer840 3 жыл бұрын

@@TexasDronePilot Agreed, and I think that ICF is going to quickly make it obsolete...

@eddieserrano429 2 жыл бұрын

How much does this machine cost? I'm a recent Mechanical Engineering grad and was wondering what kind of software do you use to build 3d structures like this? If I'm capable of using solidworks or inverntor should that suffice to design and build ?

@armankilic 3 жыл бұрын

Game changer

@musicplaylists64 3 жыл бұрын

where is the plumbing and electric? and if installed in concrete how would you remodel or fix plumbing or electrical issues behind the concrete wall?

@automateconstruction 3 жыл бұрын

Only electric it’s just a garage.

@heartobefelt 3 жыл бұрын

there are many simple ways if you think about it . cut the hole for junction boxes for power , lights and switches , drop the conduit down into the wall cavity , fit the conduit elbow retainer nut or clip , then you can fill the wall with insulation if using any and pull the cables last after the robot has finished rendering the interior and exterior walls.

@musicplaylists64 3 жыл бұрын

@@heartobefelt ehh alright point. I sure would not want that in my home. What if someone wants to remodel and re-frame the house to be bigger? haha

@carlosaldana50 3 жыл бұрын

Me gustaria planificar un proyecto inmobiliario para viviendas de bajo costo en mi pais Guatemala

@mannys3678 3 жыл бұрын

Ok where do i sign 🤔

@warlord76i 2 жыл бұрын

So the house dimension is limited by the printer dim... is that right? These houses have metal bars in the key areas for stability? If not, how stable is the house in front of Earthquakes? Fuel consumption i guess is high for the printer.

@richardandersen7982 3 жыл бұрын

Is this part one of two for your newer video?

@printedfarms443 3 жыл бұрын

@TEC KZfaq Nice comment. Thanks

@jessicakirsh 2 жыл бұрын

Hey Jarrett! I just found your channel this morning. I liked, subscribed, and hit the bell! I'm based in South Texas near Starbase, where SpaceX is developing its Starship rocket in an effort to make human beings a multi-planetary species. I've become increasingly interested in 3D printed homes for affordable housing purposes as well as for the future buildout of a human colony on Planet Mars. I have spent the last 6 months documenting the buildout of the city of Starbase, Texas, and I feel 3D printing housing will be a tremendous game-changer for rapid builds, affordability, and replication of the building process as we make our way into the cosmos. I appreciate all that you're doing as you travel the world to document different 3D-printed housing projects! Keep it up! Cheers from Starbase, Boca Chica, Texas -- which Elon calls the Gateway to Mars 🚀 Jessica Kirsh

@automateconstruction 2 жыл бұрын

Wow that’s awesome! I’d love to hear more about your documentation of the Starbase village! Send me an email jarett@3dprinted.construction

@siggilamp4675 3 жыл бұрын

Is there any rebar involved with these bldgs

@automateconstruction 3 жыл бұрын

Yes

@Canada_Immigration_Bible 3 жыл бұрын

Looks like the mortar material is more watery !!! What do you think.....???

@repalmore 3 жыл бұрын

Tenting or environmental control of some sort. True it drives up cost. What should be evaluated is quality cost benefit. Not just cost.

@denislanglois8922 3 жыл бұрын

Can you tell us How much CO2 you generated with this method? Also how do insulated theses walls?

@jayarmstrong 3 жыл бұрын

'We want to show that 3D printing is better faster and cheaper' ... also, 'We're making exclusivity deals with materials manufacturers.' Sharing tech will scale the industry a lot faster.

@hplowe 2 жыл бұрын

I'd love to learn what to do in this industry.

@jeffturner6698 3 жыл бұрын

Very cool. What is your favorite 3D printer type? Why? Co.? Why? Are these or others available for purchase yet? If not, when? Price or estimated price(s)? Thank you

@automateconstruction 3 жыл бұрын

Yeah this one is $400k is too early for me to pick a favorite but my investigation continues.

@jeffturner6698 3 жыл бұрын

Im following this cutting edge technology and enjoy your videos. I know its been around for some time, but I hope it's here to stay and become the new standard. Can I contact you by email for more info? Thanks 👍🏻

@automateconstruction 3 жыл бұрын

@@jeffturner6698 Me too Jeff. You can reach me here. Jarett@3dprinted.construction

@tarikaita1507 3 жыл бұрын

Hey Jarett, Very informative channel you have on this new technology. I was wondering if you've asked Printed Farms about their cost breakdown/analysis.

@printedfarms443 3 жыл бұрын

We need more buildings to nail down exact costs.

@chasl3645 3 жыл бұрын

I see serious sand supply shortages If everything is printed.

@hakkinen2013 3 жыл бұрын

How can I get involved in investing in 3D printing of houses?

@gregbolls7815 3 жыл бұрын

I want one

@JerryDechant 3 жыл бұрын

It would be faster to have more than one printhead operating at a time, one prints 1/2 the structure, the other prints the other half. But if time to print isn't a big concern, then I guess this idea is moot. :)

@lindaclayton8701 3 жыл бұрын

👍

@westleywest7259 3 жыл бұрын

How much do one of these machines cost?

@amaturearcadia 3 жыл бұрын

This is the future

@logiclab1 3 жыл бұрын

What happens if it rains?

@dougchatman9220 3 жыл бұрын

Insulation Data?? Ty.

@veronicagreen2150 2 жыл бұрын

This is awesome I would like homes built on my land 7 acres in Georgia

@valentinclaude 3 жыл бұрын

Good exemple of "When the assistants know the business man chef doesn't know much on the topic....."

@Funlaughteelol 3 жыл бұрын

I have 5 acres in Lucerne Valley CA. How may I build a few houses?

@mrkemper648 3 жыл бұрын

Since this is in Florida how does FBC and FFPC codes play into this building ?

@automateconstruction 3 жыл бұрын

They don’t this is a private agricultural use.

@heartobefelt 3 жыл бұрын

that is the problem in most first world countries. Foamcrete , Geopolymer , insulated thermal sandwich laminates , they all have rough hurdles to obtain compliance to building codes. When everyone stops bitching and agrees to a standard for these materials then it can go gangbusters . right now its the main obstacle. In third world countries , no such problem.

@YesItsMeGuys68 2 жыл бұрын

Where are the windows going ? Is this a warehouse or a home ?

@automateconstruction 2 жыл бұрын

Garage

@williamhuang5329 3 жыл бұрын

Hanzhen harmonic drive gear , industrial robot arm gear reducer, factory automation joint gear

@printedfarms443 3 жыл бұрын

👍🏻

@artsparadisopracticaleduca4378 3 жыл бұрын

Awesome work, folks! It would be amazing if miniature 3d printers can be taught to students, starting as early as elementary education, right after student learn to do Lego construction.

@raymondmeyers8983 3 жыл бұрын

The drawback to these kinds of buildings is that you’re very limited when you want to make renovations.

@YesItsMeGuys68 2 жыл бұрын

Its a pretty odd name for the company , considering what it is that you produce .

@lawsfreelancemalice1380 2 жыл бұрын

A happy vast improvement for humanity. Removes all those lazy rip off building techniques that young families pay through the nose for and banks life-long mortgage servitude. Speed of 3D printing has obliterated laziness overnight, there’s going to be mountains of expensive tools and long learned skills suddenly obsolete. It’s surreal how today’s computer-tech has suddenly ensured 3D-printing simplicity really makes a house far stronger…than the brittle corporate composites builders have slowly evolved…within hours!

@Gio-kh2be 3 жыл бұрын

What is the ticker symbol for this company

@automateconstruction 3 жыл бұрын

Both the printer manufacturer and the startup are both private companies.

@Gio-kh2be 3 жыл бұрын

When will they IPO

@automateconstruction 3 жыл бұрын

I asked about that in a recent podcast episode with the Cobod CEO and founder Henrik and he said that at this stage they are keeping the company private for the foreseeable future which is generally to be expected from construction companies.

@Gio-kh2be 3 жыл бұрын

@@automateconstruction OK sounds good thanks for the info I really appreciate it

@okiedokie99 3 жыл бұрын

The printer companies would be more what you would invest in the future I would guess

@PlatinumDragonProductions999 3 жыл бұрын

This is so awesome. Where can I invest?

@automateconstruction 3 жыл бұрын

Are you an institutional or accredited investor

@PlatinumDragonProductions999 3 жыл бұрын

@@automateconstruction No, just an average person looking for a growth opportunity :-D I probably should have stated that earlier. :-)

@johnnyoneye2641 3 жыл бұрын

Watch out for sinkholes!! That's allotta concrete!! Wonder if they are using binders , polymer or some liquid strengtheners like carbon or graphite Powdered Hemp fibers or something 😁😎🕳️

@MSuthy55 3 жыл бұрын

Can this print a dome home?

@automateconstruction 3 жыл бұрын

TBD

@warlord76i 2 жыл бұрын

And a major question is : what happens to people, whom used to work in the building industry???

@automateconstruction 2 жыл бұрын

Why do you say used to? They still will. There is enormous demand for construction labor.

@rebelone3722 3 жыл бұрын

Great...they're not using this to solve housing shortages, according to Jim, he wants to remove labor from the equation.

@socrates_the_great6209 2 жыл бұрын

The tent part...why cant you "build" a tent around it for like 0 USD? I already now know how to do it. Unless it has to be stormproof my idea will work. If it can 2x the building speed it would be well worth it.

@caldelt 2 жыл бұрын

30 years 🤣 Coming a lot faster than that.

@stevenlight5006 3 жыл бұрын

I visited but I c no progress from then ?

@automateconstruction 3 жыл бұрын

They’ve made quite a bit of progress I’ll have a new video up about it soon

@SpaceBond07 3 жыл бұрын

@@automateconstruction Yes pls. Eagerly waiting for ur next video like this one

@svarogbg 3 жыл бұрын

Sooo... where is steel armature?

@sheeladhvajsingh7712 3 жыл бұрын

I request you to please educate civil engineers with the help of various research work that you are conducting to test this advanced technological innovation through zoom , google meet etc. This will help you to get in touch with various interested people , who would love to explore with you on this interesting new innovation of construction industry.

@automateconstruction 3 жыл бұрын

I’m too busy to speak with everyone personally so I’m forced to charge for consulting services which can be booked on my website. If you have a list of questions I could make a video addressing them for KZfaq.

@sheeladhvajsingh7712 3 жыл бұрын

Yes I have 1)How and when you thought of becoming a part of this new innovation. Please also share with us various growth milestones you achieved while pursuing this.

@automateconstruction 3 жыл бұрын

@@sheeladhvajsingh7712 I saw the $10,000 house video and got all excited like many of you, when I saw it wasn't a reality yet I just never gave up on the idea. One day when I find a vastly cheaper construction method I would like to help implement it until the supply of homes is far greater than demand.