Printing and Flying the JRM-01 Junior Mini RC Fighter Jet
Рет қаралды 28,426
Ай бұрынGet the STLs on our new website:
aerojtp.com
Get your Bambulab 3D-Printer and Material here:
shrsl.com/29j33-2yn7-1cwx9
*Affiliate Link
#bambulab
If you wanna support this project, you can become my Patreon:
/ rene_rosentraeger
Or buy me a coffee :)
www.buymeacoffee.com/ReneRc
Support me on Paypal:
paypal.me/rrosentraeger
@renerosentraeger 5 күн бұрын
STLs on: aerojtp.com
@timapologun6995 29 күн бұрын
Amazing!! When will the STL be available, I am so excited to print this masterpiece
@renerosentraeger 29 күн бұрын
Very soon, Marc and I work hard on it💪
@camk2552 28 күн бұрын
@@renerosentraeger Yes please nice work!!! Cant wait to fly
@equibub6548 21 күн бұрын
I'm new to 3D printing but the level of design detail going into your models and seeing how much of it is printed makes me want to get into it even more! Looking forward to when the model for the Junior releases, it's so awesome
@flymachine 23 күн бұрын
I have a smaller one using 2x 25mm edf’s on 350mha 3s - it’s a military jet but not a fighter strictly so I guess you’re right. Love your work
@mikecarbone828 21 күн бұрын
Very nice build and a great maiden flight! ☀️✨✈️
@renerosentraeger 20 күн бұрын
Thx🙌
@kieren7763 24 күн бұрын
I redesigned my a10 warthog for single a 50mm edf and used 3s to save weight the thrust is technically abit more aswell the twin esc, motors, housings and extra wiring plus the extra battery cell really do add up now i have a futuristic a10 warthog with twin inlet ducts to a single 50mm edf hidden inside its printed with LW pla and uses the big chinese foam glider wings
@Mavy1704 4 күн бұрын
I got mine, too 🙌
@renerosentraeger 4 күн бұрын
Great 🙌
@Flybrei 16 күн бұрын
Bei dir startet aber wirklich alles senkrecht 😆😆👍👍👍👍 sehr cooles Teil
@renerosentraeger 16 күн бұрын
Danke dir 😅
@fredydefcon1 24 күн бұрын
am so excited to print this, waiting for the stl
@renerosentraeger 4 күн бұрын
STLs on aerojtp.com
@adamtrzaskowski3901 28 күн бұрын
I had no idea 30mm EDFs for RC even exist ;D Nice vertical "take-off"! :D
@renerosentraeger 28 күн бұрын
Haha, thanks 😁🤙
@peterboy209 28 күн бұрын
Small is beautiful
@tobikeller5222 25 күн бұрын
Tja ich glaub das wird mein erster edf. Sehr schönes Flugbild Respekt.
@renerosentraeger 24 күн бұрын
Hört sich gut an!
@loebair 28 күн бұрын
sehr schön! :)
@mikelarin8037 29 күн бұрын
This is amazing. Since the world is getting so strict on size, I'd love to see mini versions of some of your other planes. I've shrunk down someone's f22 model to hit the sub 250g limit with just one qx 30mm and it flew well. Some videos on my channel
@timapologun6995 29 күн бұрын
I just had a look at your videos, so cool! What STLs did you use to create the f22 and did you use standard PLA?
@renerosentraeger 28 күн бұрын
Looking good!
@air-headedaviator1805 29 күн бұрын
Mr. Rosentraeger, what are you thoughts on the nature of aerodynamics on EDF and scale effect jets? Typically swept wings find advantage at high forward speeds and high renold’s numbers, but most RC planes don’t arrive at those values. Are there certain disadvantages accepted for designs emulating jets?
@renerosentraeger 29 күн бұрын
For small scale Jets, a low wingload is everything in terms of nice handling. For reaching high airspeed ... Power power...
@wassimakkire7004 29 күн бұрын
Welcome to Airbus designing team 🤝
@chronicandironic8701 22 күн бұрын
if it was boeing they’d be killed 🤣
@dynamizer2 25 күн бұрын
Great!
@marielizysurourcq 26 күн бұрын
Cool that you go the "small way" because I would never do big 3D planes, just because of lacking room in the first place...
@battano 24 күн бұрын
NIce! I'm working on a 30mm J-10 I'm still shopping for a canard delta mix capable gyro for anyone know what he's using in the video? I have an extra AR631 but no clue how to get delta configured for AS3X where the one he is using looks like just dip switches...
@yeethatboi1563 28 күн бұрын
where will you post the stl i have also looked at some more of your work and I find it extremely interesting you just earned a sub!
@renerosentraeger 28 күн бұрын
A new website is in the making. More infos soon.
@gafrers 29 күн бұрын
Great
@airhammer6203 28 күн бұрын
👍👍👍😎 Now this this mini me is totally cool!! Nice work Rene' Edit: who makes the EDF units??
@renerosentraeger 28 күн бұрын
Look For QX Motor EDFs
@edgardesy3371 25 күн бұрын
What battery size fits in there? Anyway nice project!
@renerosentraeger 24 күн бұрын
Thx! 4s 800-1000mAh
@swede910 22 күн бұрын
Pick your favorite 3D-printers, preferably fastest, which ones will it be?
@renerosentraeger 20 күн бұрын
Bambu x1c
@dhairyapanchal7887 29 күн бұрын
Bro how you get such mat finishing can you share your settings for bed slinger printers
@renerosentraeger 29 күн бұрын
Find the print profiles on my Patreon site.
@Kramskybmw 28 күн бұрын
Great design😊In your opinion from the printers taken to do this plane, what is the printer with best quality printing?! thanks 😉
@renerosentraeger 28 күн бұрын
It's the Bambulab xc1.
@Kramskybmw 28 күн бұрын
@@renerosentraeger ok..i mean the second one 😂
@renerosentraeger 26 күн бұрын
Creality K1C
@gavinomalley1637 29 күн бұрын
is it still all LW-PLA? If so, where do you get the different colors?
@renerosentraeger 29 күн бұрын
From 3dLabprint and colorfabb.
@technicbuilder6410 29 күн бұрын
How about differential thrust for yaw?
@renerosentraeger 29 күн бұрын
Or micro vector nozzles 😁🤙
@technicbuilder6410 28 күн бұрын
@@renerosentraeger yea, but my point was to only change "software" (if that's how you call it) and not construction of the plane.
@aereo_69 21 күн бұрын
Hello, could you tell us where to get the stls please? thank you
@renerosentraeger 20 күн бұрын
Soon
@user-jv2yn7rd8c 29 күн бұрын
👍
@EscapeThaSchool 22 күн бұрын
Hi, gibt ein irgendeine Möglichkeit den Kleinen auch zu Drucken? Evlt. die Datein zu kaufen?
@renerosentraeger 22 күн бұрын
Ja Ende Mai.
@EscapeThaSchool 22 күн бұрын
@@renerosentraeger Okay nice. Werden die dann frei zur Verfügung stehen?
@xfastwalker 29 күн бұрын
Very nice, STL available?
@renerosentraeger 29 күн бұрын
Very soon
@UNKNOWN_-qq9wx 19 күн бұрын
im new to rc planes i just bought my self a 3d printer would it fly normaly?
@renerosentraeger 19 күн бұрын
Yes, super easy to fly.
@olliehanimation 28 күн бұрын
Where do you buy the LW PLA in those colours?
@renerosentraeger 28 күн бұрын
3dLabprint and colorfabb
@olliehanimation 28 күн бұрын
@@renerosentraeger yes but not in those nice orange and teal colours? Can you send a store link pls 🙏
@swede910 22 күн бұрын
Germanic people made this world is what I usually say to people! 👍
@TheWalkingLP 18 күн бұрын
Kann man auch den su 47 in so klein machen?
@renerosentraeger 18 күн бұрын
Klar!
@moazelzanaty8439 25 күн бұрын
Very Good job my dear , kindly upload stl files , im very excited to print and fly
@renerosentraeger 24 күн бұрын
Release is end of the month.
@chronicandironic8701 22 күн бұрын
i’d pay good money to get those STLs
@renerosentraeger 4 күн бұрын
Aerojtp.com
@rjung_ch 29 күн бұрын
👍💪✌
@quadpop4643 24 күн бұрын
Can we not buy the files for these planes or there not ready yet?
@edgardesy3371 24 күн бұрын
Not ready
@quadpop4643 24 күн бұрын
@@edgardesy3371 thank you
@renerosentraeger 4 күн бұрын
STLs on aerojtp.com
@quadpop4643 4 күн бұрын
@@renerosentraeger awesome thank you again!
@richardspicer8253 29 күн бұрын
Awsome work 👏 but I need a sub 250g 🙏
@renerosentraeger 29 күн бұрын
No problem, coming next🛩️
@richardspicer8253 28 күн бұрын
@@renerosentraeger you're a star 👏👏👌
@Dartheomus 21 күн бұрын
@@renerosentraeger Really?! That's pretty impressive. Unlike drones, I feel like a sub 250 plane would need to be flown indoors. It seems like the wind would blow it all over the place.
@krisloaf5473 2 күн бұрын
Make a flying yf-21 Valkyrie from macross
@ravendarkcloud 22 күн бұрын
OMG, the damn bugs you hear on the vid had me swiping my hand past my ear. With ear buds in it sounds like a bug really flying past your ear.
@JimEdmiston 23 күн бұрын
What makes you think it's the smallest in the world? 😂
@mariusfauru 22 күн бұрын
STL please😌👍🍺
@renerosentraeger 4 күн бұрын
Aerojtp.com
@solderingiron9405 28 күн бұрын
don't remove strings with a knife remove them by reducing flow and correcting retract distance in slicer i will also suggest running stringing tests with for each type of filament before printing major parts
@ttpechon2535 28 күн бұрын
He has said many, many times, that retract does not work with these filaments, I think he has a video on it.
@Terry_Fritz 28 күн бұрын
Rene addressed this problem in a previous video. He said LWPLA doesn't retract very well so ignoring the setting and trimming with a knife was far easier.
@solderingiron9405 28 күн бұрын
@@ttpechon2535 I'm first time in this channel so i didn't know that
@MTBCrafter 28 күн бұрын
@@solderingiron9405the problem with LW-PLA is that it's creating a foam. The hotter you print the more it expands. That's why you can't retract it that good. Even if you stop extruding the filament proceeds foaming. The only way to prevent it is the vase mode, due to the continuous flow. But it's not that easy to design those parts (and it's very time consuming).
@solderingiron9405 28 күн бұрын
@@MTBCrafter i actually never heard of that material. i will make a little bit research
mobildoctoruz
Рет қаралды 526 М.