PRISM SUPPLY | DIY Install | ’82-’03 Sportster Hardtail Kit
Рет қаралды 72,066
2 жыл бұрынOur ’82-’03 Sportster Hardtail Kit is 100% made in Charlotte, NC and completely tig welded from top to bottom.
The looped back end is a nod to the motorshop frames from the ’60s and ’70s. Coupled with 1” diameter tubing, this kit enables you to bring classic big twin chopper style to your Evo Sportster.
We developed this kit for the home builder and designed it to accommodate stock components such as wheels, axles and brakes. With a goal to stay as close to OEM specs as possible, we made the frame with 1.5” stretch to allow room for fender clearance, seat fitment and an oil tank.
Everything needed for installation is included such as hardware, slugs, bungs and fittings.
Buy our Sportster Hardtail Kit & Accessories:
prismmotorcycles.com/collecti...
Follow along with our installation instructions:
prismmotorcycles.com/blogs/ne...
Watch our other DIY Tutorials:
• DIY Tutorials
Watch our popular uploads:
Dreamboat - • PRISM SUPPLY | Dreamboat
Jonny Bourgault's '95 Sportster - • PRISM SUPPLY | Jonny B...
First Start In 40 Years - • FIRST START in 40 Year...
Will it Start? - • $1,000 Says We Can Sta...
Road Trip of a Lifetime - • PRISM SUPPLY | Road Tr...
Subscribe to Prism Supply on KZfaq:
/ @prismsupply
Subscribe to our Newsletter:
manage.kmail-lists.com/subscr...
Shop Prism Supply:
prismmotorcycles.com/
Follow Prism Supply:
Instagram: / prismsupply_
Facebook: / prismsupply
#prismsupply #harleydavidson #motorcycle #DIY #tutorial #howto #sportster #hardtail #install
@manuelgamboa3401 2 жыл бұрын
Please tell me that you continue filming the project!? I mean, show us all nexts steps of this project! 🙏🏼 regards from Costa Rica, someday I will cut my sporty 😅
@poweredbyltx 2 жыл бұрын
Very thorough install vid. Nice work
@richardweatherly7330 2 жыл бұрын
Try using hose clamps over the tape they act as a guide when you cut.
@noxington4260 2 жыл бұрын
I was wanting for this to come back in stock, about to pull the trigger 🤘
@TulsaCountyBees Жыл бұрын
Installed mine today. It took a few months longer to get started. Took most the day but it was not in a shop just the parking lot. Easy fit up drain your oil and clean your bike first if you can. Have fun
@busterthompson4520 Жыл бұрын
Awesome thanks for sharing
@ilovecarnitas 2 жыл бұрын
Great video and hardtail
@greenwave792 10 ай бұрын
15:15 I was screaming "dont drill into his arm" thank God....there is enough of us that get whipped out by cars, not one of our own .
@borelius 2 жыл бұрын
This makes me wanna buy an evo. :D
@2ndborn186 2 жыл бұрын
Cool fabrication. Looks like the kit is dialed in and precision made. I just found you guys and subbed. Building a bobber myself, almost done. If I may suggest, take it from an old guy, step drill your holes next time and use an oil on the bit tip. I am also a school shop teacher....wear your safety glasses!!! lol. Keep the vids coming. I will catch up on all the vids on channel.
@dustinfindlay3699 Жыл бұрын
technically with a cut-off wheel you want a shield...
@basedorthobrofren3724 Жыл бұрын
Why step drill? What's the benefit?
@Bigsoot7393 Жыл бұрын
@@basedorthobrofren3724 they make round holes, drill bits make triangle holes
@1down4upworkshop61 2 жыл бұрын
Nice video guys... Are those bottom rails flared? That's a nice detail. I like that a lot...
@DocKeyBo Ай бұрын
I wish you guys had hardtails for 76 😭
@rudraigh 8 ай бұрын
Hey! That's my old couch!
@francisstraughniii2473 2 жыл бұрын
Nice sander
@farrelllambeth1707 Жыл бұрын
I rode a friend's 1962 pan head bike, 37 miles. My kidneys felt like bagbo drum's . I will never ride a hard tail again.
@thomasmcdonald91 Жыл бұрын
I was put the motor in and bolt it down then Weld😮
@ekim000 Жыл бұрын
Getting rid of a bikes suspension makes all kinds of sense.
@michaeltrenfield9893 2 жыл бұрын
Whoa that dude isn’t dressed like a hipster elf. Figured he slept in that costume
@fitzymagee7469 2 жыл бұрын
An engine jig is a lot easier than lumping the engine in & out
@JerBear_1989 Жыл бұрын
What that front end 6 over or 8 over? An when will a follow up videos be coming for this build????
@grxvez1067 6 ай бұрын
Can i leave the small bar in that should be cut out?
@nickgilson6086 Жыл бұрын
When will the hardtail kit be restocked?
@bennyb.1742 2 жыл бұрын
That tube sander! What is it and where can I get one!?
@low87dawg86 2 жыл бұрын
That thing is sweet. Never even seen one
@thomasmcdonald91 Жыл бұрын
Always
@papa6666 2 жыл бұрын
How big of a tire can you put in there
@larrylunkerman3946 2 жыл бұрын
what sander is that?
@bikerider2797 Жыл бұрын
Add oil to the drill bit
@bill9074 2 жыл бұрын
Why didn't you paint the frame before you put the engine back in?
@MoeLarrycurly1 2 жыл бұрын
I'm not sure why you drilled the hole through the slugs and the original frame I thought you were going to put a nut and bolt there I remember when I did my 69 triumph tiger the kit came with a nut and bolt you could also weld it too. The bsa's I used to do were just welding only I thought the nut and bolt was a extra safety measure.
@codybarber522 Жыл бұрын
This series over??
@michaelblackburn9379 Жыл бұрын
Stop that drill bit from slipping. Tighten up the chuck then turn the chuck back one click to lock the bit in should hear a click.
@_DustyRay_ 11 ай бұрын
I would not have used an impact on those mounting bolts just saying..
@haroldyazzie3538 2 жыл бұрын
What your hand!!
@-badass 5 ай бұрын
А че болты на лактайт не сажаем? И зачем в раме дырки сверлились?
@solwong1338 2 жыл бұрын
I stopped watching when you made the first weld without the engine or some sort of jig in to line up the mounts.
@ilovecarnitas 2 жыл бұрын
Too bad
@DEATHMETALCYCLE 2 жыл бұрын
Same haha
@chrisaskme811 Жыл бұрын
The guy using the grinder looks scared. Looks like it’s his first time in a garage let alone working with pneumatic tools. He looks like he was going to cry several times throughout the video. Maybe edit those parts out?
@lovablevietboy Жыл бұрын
The dude with the glasses has never used powertools in his life and it shows lmao
@ryanwightman9590 Жыл бұрын
Gotta start sometime
@aaronchandler8141 Жыл бұрын
All cool but the elevator music hurts
@glennstatham960 2 жыл бұрын
Hopefully you provide metric measurements for the rest of the World!
@low87dawg86 2 жыл бұрын
Why? Harleys are standard
@Bigsoot7393 Жыл бұрын
@@low87dawg86 tape measures in the rest of the world aren't
@g.g.6362 6 ай бұрын
It's not a Jap bike!
@wolfeyes9357 Жыл бұрын
No gloves, don't like fingers?
@preetpresenter8089 2 жыл бұрын
Yg pake jas payah amat cara kerjanya...disuruh pake rok aja lebih cocok 😅
@user-gb3ey2zn7b 2 ай бұрын
I was stoked to buy stuff from prism, after seeing they are charging 699 for this kit that does nothing more than a $350 tc bros hardtail kit and doesn’t even come with hardware lol yea I’m not buying anything from theses hipster poofs
947 WORKS
Рет қаралды 32 М.
Diana Belitskay
Рет қаралды 40 МЛН
lowbrowcustoms
Рет қаралды 316 М.
Throttle Addiction
Рет қаралды 18 М.
Delboy's Garage
Рет қаралды 18 М.
Throttle Addiction
Рет қаралды 35 М.