Proboat Impulse 32 First Run! Got it Running Smooth & Fast. She's a Ripper!!!

Рет қаралды 7,588

6 ай бұрын

I bought a Brand New Proboat Impulse 32 to add to the fleet!
This was the first trip out was Great! I made a few adjustments and had it handling like a Pro by the end of the Run.
This boat is going to Fly at the speed run spot!
#rcboat #proboat #impulse32 #traxxas #rcboatracing #rcboats #rc #brushless #smcbatteries #cncprop #spektrum #spektrumrc

Пікірлер: 29

@markgambetta1704 6 ай бұрын

This is Mark Gambetta again, I received your reply, that’s all I do straight away for top speeds, my Oxidean Marine animal top speed 111 mph, I am having a great time with the dominator, like I said 85 mph was my fastest (goal now is somewhere between 85 and 90 ) but at those speeds it is hard to keep the boat on the water, if you’re going for top speeds I would recommend the carbon fiber dominator. The speeds I have gotten on both boats are stock electronics just bottom work props and weight distribution. Good luck and I will be watching and hopefully learning keep up the good work thanks

@michaeltrzaska5880 6 ай бұрын

This is excellent content. The way you experimented.

@8fordhamsRC_adventures Ай бұрын

I run a red and white impulse 32..awesome boat

@Mya-2022 2 ай бұрын

I have learned so much from watching you so I subscribed!

@IRONCLADRC 6 ай бұрын

Great run, one thing id like to recommend that may help you get longer life from your packs. smc Battery's are composed of special LCO's they do not like to be discharged below 3.6v for some reason i have the same thing happen to mine once "overly discharged" They get hot as all get out once discharged to 3.2v. Maybe this helps? Hope it does. BG4L

@skunkworks9635 2 ай бұрын

Weird . Smc are top notch . Love them

@hoodatdare7039 6 ай бұрын

YOU HAVE THE RIDE LOOKIN GOOD.

@roady1710 3 ай бұрын

I’m gonna nickname your boat flipper

@jasonm1922 6 ай бұрын

goes great

@RDM3DLAB 25 күн бұрын

My BJ42 came de-soldered, and the bushing jammed stuck to where I had to take off the strut in order to grease the shaft!! I hear it's common!

@FEboats 3 ай бұрын

I ran this hull one time the day it came out and came home and ordered a df33 to put the hardware and electronics on.

@GuteBysen 4 ай бұрын

Nice video mate. What happens if it flips, will it self right or is it go for a swim time?

@jimstone5339 5 ай бұрын

First time I've watched your show and I really like it. Great info. I know your trying to get the boat to run good and you did a great job at showing that. Every boat has it's own character, even model to model and you have to get it to where it's drivable but there are characteristics that you might want to play into. I like to bash my sonic and it's a great boat. Mine likes to run dry. My son has the same boat and his runs wet.as much as i try mine won't run as low in the water as his. But man wil it jump and 360 where as my son's won't. I play into the differences and learn to drive it better. Of course if it's not controllable then you have to trim it. I hope that makes sense.

@H2oMechanic2RC 5 ай бұрын

It makes total sense! Every boat is different, that's why I keep buying different hulls. It's very enjoyable to tinker & test different setups

@markgambetta1704 6 ай бұрын

Love your videos. I have a dominator best speed 85 mph, I am surprised you purchased a pro boat after having the dominator. I think the dominator is a much better boat with higher speed capabilities. I will keep watching to see what you think. Keep up the good work, thanks for the videos Thanks Mark

@H2oMechanic2RC 6 ай бұрын

Honestly it's so very similar to the Dominator. I still may buy a bare Dom hull, but I'll have to sell one before doing that. I want to build a drag boat, strictly straight line runs, im just testing different hulls til then

@parker1ray Ай бұрын

I used to run my boats in south Florida! One time a boat caught air off of a gator's back! Anyone ever had something similar happen LOL?

@H2oMechanic2RC Ай бұрын

We typically deal with turtles 🐢

@simonsteinmetz3618 5 ай бұрын

Tolles Video / Motor Upgrade? 😜

@H2oMechanic2RC 5 ай бұрын

3684 TP motor! 2160kv

@simonsteinmetz3618 5 ай бұрын

@@H2oMechanic2RC kann den Motor im Internet nicht finden , bist du dir sicher das er tp 3684 heißt

@Mya-2022 2 ай бұрын

I can't wait for this lawsuit money to come in bc I'm buying all types of boats!! Which one would you recommend up to 3k?

@H2oMechanic2RC 2 ай бұрын

Sonicwake v2 if it's your first boat!

@MaxPower-zp7wy 5 ай бұрын

I'm looking for RCBoat KZfaqrs for help. There are no videos of how to setup an RC Boat with the Radiomaster TX16S MKII. Especially with Frysky receivers. D8/D16 ACCST V1. I really need someone to help. :(

@jaycevessier7554 6 ай бұрын

Don’t forget man, it has ALOT to do with your prop too. Some are lifting props, some aren’t. With my spartan it loves non lifting props. Once I put a prop on that pics the rear up it’s too loose.. so before making a shit ton of adjustments, try different style props

@jaycevessier7554 6 ай бұрын

Oh and the water is coming from where your stuffing tube comes through hull, it’s a common problem. Just get some water proof epoxy and fill that back area

@H2oMechanic2RC 6 ай бұрын

I agree 100% but the stock prop seems like a lifting prop. 41mm x 1.7p that's why I swapped to 1.4p props. The 3 blade prop does so well, im excited to try others as well

@RogallaMarineRC 6 ай бұрын

Check motor water jacket for leak

@jaycevessier7554 6 ай бұрын

@@RogallaMarineRC could possibly be that but 99% sure it’s stuffing tube