No video
Proboat Mystic 29 Brushless Motor and Carbon Fiber Upgrades! GPS Comparison for Speed x2
Рет қаралды 684
8 ай бұрынMy 13 Year old Proboat is about to get some much needed upgrades!
Before we go down that route, I need to get a baseline run to know where I started from!
#proboat #traxxas #missgeico #blackjack #traxxasspartan #brushless #brushlessmotor #recoil2 #shreddy #rcboat #rcboatracing #upgrades #lipo #carbonfiber
@jaycevessier7554 7 ай бұрын
You either need your weight further forward, get a better prop, or add trim tabs. It’s bouncing way too much
@jaycevessier7554 7 ай бұрын
You need a prop that lifts the transom. I’ve had the best luck with 3 blade props on a cat style hulls
@H2oMechanic2RC 7 ай бұрын
I agree! I have a 4216 3blade that should be perfect, just waiting for a good day to test it now that I have a better motor. Smc 6s 250c packs are perfect power & weight. She should hit 55-60 if I have a big enough spot to run it. 1 acre pond is tight for speed runs.
@PatriotBrad 8 ай бұрын
I have 3 V1 and i want to get rid of the inline so i can grease easier and such. Did you put a veles strut/rudder assembly on? Part of my winter plans.
@H2oMechanic2RC 8 ай бұрын
Nope, it's all original
@PatriotBrad 8 ай бұрын
@@H2oMechanic2RC then it must be a V2 because my V1s all had inline Rudders on all three models. V2 had the rounded hatch still but the offset rudder.
@H2oMechanic2RC 8 ай бұрын
@@PatriotBrad good to know. I just know it has 2011 on the old receipt that was in the box
@juniorwest5706 8 ай бұрын
What state are you in ? Just wondering !
@H2oMechanic2RC 8 ай бұрын
Va/nc
@juniorwest5706 8 ай бұрын
@@H2oMechanic2RC middle Texas !
@H2oMechanic2RC 8 ай бұрын
@@juniorwest5706 it was 39⁰ when I got home, was eager to go out for a little peace on the water
H2oMechanic2 RC
Рет қаралды 866
H2oMechanic2 RC
Рет қаралды 2,4 М.
奧特羅羅 Ultraman
Рет қаралды 6 МЛН
Ong Speed & Marine
Рет қаралды 801
H2oMechanic2 RC
Рет қаралды 500
H2oMechanic2 RC
Рет қаралды 451
Mad Lizard Rc
Рет қаралды 403