It's definitely an expensive hobby to be in, ask my wife! 😆 BG4L

Glad I can help brother. Hopefully your speeds & performance is getting better and better. BUILD IT IRONCLAD!

Thanks for noticing, you made my day brother. Bg4l

Oh man it was Slick'em UP out there, wish I could get beautiful weather like that everyday. Didn't you get a veles 29 or was it the ul19? I can't remember? Anyways I appreciate the support brother, the sss motor in the boat is the one you sent me a while back. Thanks again

@@IRONCLADRC yes we always dream of flat water for our boating days!! Yes I got the UL 19 and have a Geico 36 all stock so far but have motors and ESC’s ready to go in, just wanting to see what max speed I can get stock with battery and prop combos atm!! Ahhh so thats was the SSS!! Wow found its place there. So glad I can be a part of the speed record brother!! Have my little 16” build done now!! It goes so good!! Surprized me! Need to send in the shots for build of the week haha!!👍🏻

Yes please by all means send the build photos I'd be glad to do a build of the week..

Oh man mr mad had a great looking run, he makes it look to easy, I was excited to see him hit 91, even more excited when turned my hatch over and saw 92.

Thansk for the support brother & welcome to the channel

I appreciate it brother thanks for watching

I'm slowly trying to trim the veer out, hopefully! 🤞

I ran a couple packs in the v2 today just for fun. I'm contemplating 1 of 2 things. Throwing the tp 4060 in the v2 or the 160 firma & run her on 8s a few runs?? Still haven't made my mind up

Yes sir buddy glad I can help brother 👍

That's what I enjoy most about these fast boats, it's definitely a thinking man's hobby

Thanks for watching brother

Thanks brother

Thanks g-man been a long time coming, I definitely worked my azz off for this one.

@@IRONCLADRC I just got a KZfaq recommendation to watch MrMad2424's latest video that he posted 3 days ago. He got his Veles 29 up to 91 mph. I guess his record was short lived. Respect to both of you guys cause I know speed doesn't come easily.

Glad I can help

Idk about that! I think every star in this galaxy aligned for those runs 😆

Oops turn fins home made there about a inch long..from the ride serface..or your set up..

That's a great number. Awesome 👌 glad to hear

Thanks I wasn't sure if I could reuse the hockey tape, I've been reusing hatch tape for years with success 👍 thanks brother

Good luck with your build

Thanks brother

Thanks brother appreciate the support

Thanks. BG4L

Thanks brother. I worked my but off for this one you'll see in tomorrow's upload.

I like the carbon fiber dominator, and the newest super dom looks even better

@@IRONCLADRC they all look super super nice, a local shop actually had the mini doms and I was looking at it for a while lol, that 6 footer also looks nuts

Dude you'll love it. There so many little mods that can be done to this boat to improve & IRONCLAD it out

I use epoxy with chopped up fine carbon fiber to thicken and powdered graphite. Long drawn out processes are blueprinting a hull. But well worth the work if you get it right

@@IRONCLADRC With the thought in mind of using the least amount of material as possible, yet still providing the flatest possible ride surface, how thick is the application, 1/16 -1/8"?

Finally, probably won't last long.

Mr mad had a much cleaner run with no flip, guessing my runs don't count because I flipped the boat at the end of the second pass. Oh well I'm still extremely stoked about my run. Epic in my book. 😆

Thanks brother

You weren't lying brother. Super tight fit in the veles but they fit C'MON

Sounds so much faster when it's broken down to kph. 143 k & no freaking SMOKE. C'MON

Smc's have been a game changer!

@@IRONCLADRC A number of RC car speed runners also use SMC lipo's.

Its Gotta be. Lol. Slick'em Up

Syck day on the water. Thanks for watching brother

Good stuff for sure!

Thank you

Fast boat

@@IRONCLADRC studying your videos now 🤙

Couldn't believe it when I first saw the speed. Mind blown!

1900

@@IRONCLADRC thanks so much for the response. It sounded like a 2050 for 2200! Man that thing was ripping! Do you think the lighter CNC props allow the motor to spin faster than a copper beryllium or stainless steel prop? Less rotating mass….I have not tried a CNC prop yet. Just Octura, Prather, Proboat, and Grim Racer.

Yes sir buddy

Thanks brother, yes sir stock mount looks different because I hacked up my boat

this comment made me giggle!!. 92 & no duck tape. I may just have to steal that one. 😆

I've use the Lucas marine grease I agree it's good stuff I was actually mixing it with red wheel bearing grease lol.

@@IRONCLADRC thought about using the lucas oil red and tacky have a tube here laying around mainly use for tow hitches.

You'll be watching the fish swim. Lol. Grrrrr

Nice number brother. I can't get mine back on the water I'm dieing to run her again! Water here is terrible right now tropical storms off the coast has these wind band whipping thru here, hopefully I'll get a break in the weather here shortly!

I have to wait a week before the new gps gets here. Right now she is setup with a oxidean 4082 2200kv 6 pole. With oxidean 180amp esc. 4519 oxidean prop. I will update my next speed run with the new GPS

Big B? You have a Facebook page?

I don't mess with Facebook

I haven't received an email from this user name? May need to re-send

Thanks brother

Man that would be syck 100 plus on a single!

Yes, I ran a .187 3/16 in the stock stuffing tube.and yes the stock electronics take 6s, with upgraded cooling run, dual cooling

Oh yeah I constantly, set my boat on a flat top basically before each run,I've got a sheet of glass Out of my shop that's dedicated just for setting up my catamarans

I smoked one in my ul19 but I was abusive running large props. There okay speed controls but a little sensitive to high Temps

Thank you sir!

Prop choice has alot todo with high speed flipping, try running your strut higher than the ride surface literally 2 - 4mm higher with cog about 2 finger distance behind the forward step

Oh man, at least 80 plus mph at least... When you do a speed run with that mk send a video I'd like to see her in action

@@IRONCLADRC Will try to next time, need someone with me for recording (i dont have a Gopro)

I've tried gyros in my boats w/o success. They tend to make the boat fish tail like crazy.

BG4L

You've gotta tape the hatch any speeds over 30-40 mph. Sa es alot of head ache

@@IRONCLADRC i taped it haha still came off i swear the stock motor on 6s i was hitting like 60 70 mph 3/4 throttle atleast looked like it i dont have a gps yet sadly

2000kv sss

I have one for the veles just haven't had a chance to run it. Nice looking rudder from ose

Your gonna freaking love it. Thanks for watching

Hopefully I can beat that speed here shortly? Hopefully.

I think I got like 70 mph out of the stock electronics & prop

Hallo Ironclad . I am seeing the video, with the green opgraderinge an to se the very fast 91 ,92.milis. right. Cool. I love it. This model is very nice 👍🙂. I love this to proboad .black jack. 24and big 42. And abut ,this with the sound I slowmotion. It Is Colle on can here all vibration and here the motor. . thank agen . Mvh Rene' Pedersen. Danmark.

Single cooling on this one I basically only do speed passes with the veles

Lots of replaying my runs in slow motion, watching what the boat does at different speeds. Amazing how much can be learned from a good slo-mo. Thanks for watching brother

Never had a spartan, if I were upgrading that boat I'd go 4074 sss 1800 1900kv'ish flycolor or ose 150 should do the trick. Prop is start with an octura x445 oxidean 4519 4515 if temps are good prop up the diameter

@@IRONCLADRC ill give that a go .....thanks !

Loc-tite sealant? Or thread locker? Sealant yes thread locker not fiberglass

Epoxy, finally cut fiberglass mat & graphite power

No worries, doing fast laps the veles is on rails, it's the slow slow turns that tend to flip the boat.

@@IRONCLADRC hey thanks can't wait to try it. In your opinion I want to build a deep V for overall handling in rough water on a budget. Would buying a sonic wake hull be a good start.

Powered my Veles up and at 20 to 30 percent throttle the boat was screaming at me. Sounded like bad motor bearings. I had already greased shaft set clearance etc. I noticed motor had around 1mm or more commutator end play. I've never had an electric motor with end play like that. Is this end play normal for Dynamite 3831 my larger 3674. 1900kv dynamite motor has like zero end play. I installed it and still got same noise but not till higher rpm. I guess these hulls screetch on out of water testing. HELP PLEASE

@@robertprokop8101 it's the flex cable "vibrating/chattering" it's normal, once in the water with water in the driveline you won't hear it. Those 6 pole dynimite motors has some play back and forth that's also normal 👌

87 mph dang thats awesome 👌