Production of Wood inlay Strips - Herringbone and Rope Designs (123)

Рет қаралды 14,454

3 жыл бұрын

This video describes the detail production of wood inlay strips of both the Herringbone and rope pattern designs.
In a previous video I described the production of simple straight laminated inlay strips and purfling strips for guitars.
• Producing Thin Wood In...
This video is meant to be the first video in a series of videos describing more complex wood inlay strip designs. In this video I will describe the design and production of 17 different and unique wood inlay strips of the Herringbone and Rope designs.

Пікірлер: 14

@benmcgaghran2022 11 ай бұрын

Absolutely incredible video.

@KBorham 9 ай бұрын

THank you for sharing this information. Always love to see "How It's Made"....

2 жыл бұрын

Incredibly impressive - thanks for sharing!

@RosaStringWorks 3 жыл бұрын

Great minds think alike. I just used the accu-slice to make herringbone inlay strips.

@Accu-Slice 3 жыл бұрын

I am looking forward to seeing your video on this. It will be interesting to see how you made them and what you did differently. I am always interested in seeing new ideas, new techniques and different methods of production.

@floridabeardedwoodworker 3 жыл бұрын

I love your system and hope to be getting one this year.

@leahannwhite1111 2 ай бұрын

👍💓!

@npalen 3 жыл бұрын

Hi--I have a question pertaining to Accu-Slice in general. I learned about bandsaw blade drift many years ago and how to compensate for it setting the resaw fence at the angle of the drift to correct for it. You mentioned in one of your earlier videos that inaccurate cuts in conventional bandsaw resawing can be caused by the back of the blade contacting the cut. I'm wondering how blade drift is not an issue when using the Accu--Slice system if the blade being used has a tendency to drift. Thanks in advance for your help. I find your system very interesting and exciting.

@Accu-Slice 3 жыл бұрын

We have addressed this in a number of videos. Band saw blade drift is caused either by the lateral movement of the wood being cut or the back edge of the band saw blade touching the wood being cut. Since the wood being sliced with the Accu-Slice system is attached to a fence that rides perfectly parallel to the band saw blade, the wood does not move laterally and the back edge of the blade does not come in contact with the back edge of the band saw blade. For additional details see some of our other videos including the following: kzfaq.info/get/bejne/hrWkqMiatLi1m58.html

@SasonEyR 2 жыл бұрын

Hola, very good, where you buy the saw guide? Gracias

@tapout71 2 жыл бұрын

My dad is working on a pattern similar to these but would like to bend them into a circle in order to add into a guitar sound hole inlay. He’s running into issues with bending the pieces and having them break. Do you know of a good solution to this?

@Assimilator702 Жыл бұрын

Did he try to steam the pieces gradually? If the pieces are thin enough a clothes iron set to steam could do the job.

@rosieprospect 6 ай бұрын

I’m european. I work in both units. Most tapes and rules use both. You get used to it.

@tribestribes2555 6 ай бұрын

It,s allways this talk of inches here and there. Why could not those inch people talk about the millimeters instead. This would make it much more easy to understand the mesaurments, says an European.