Add a comment down below on what build you'd like to see next! Whatever has the most comments for example a dozer, forklift or semi truck etc. will be the next project. Also due to the sheer number of parts in this project I might hold off on doing a kit so I would highly recommend checking out the professorboots workshop guide which will take you through self sourcing all of the parts. Thank you so much for watching!

A telescopic forklift or telehandler would be a perfect addition to this set.

Actually, not ALL of us have seen the excavator flying a plane clip. That's pretty cool :)

i think this excavator is the best one yet

personally I would like to see a tractor with a working pto front and back you could make so many cool attachments for it

- Cherry picker (access platform) - telehandler/forklift - back hoe - mobile crane Love these builds.

A semi truck and low boy trailer is my vote. Great work!

CRIMINALLY UNDERRATED Im gonna keep saying it until youre at 100k, the quality of work is just *chefs kiss*

I've been following this channel for awhile and I just wanted to express my appreciation for the quality and breadth of of work you are putting into these projects. Everything from industrial design, mechanical and mechanism design, controls,, electronics breadboarding, PCB design/fabrication, microcontroller programming, and presumably video editing/production. To be able to turn these projects from viewer comment suggestions into fully functional objects in a matter of weeks is seriously impressive! You are definitely going places.

I love this and will definitely build one. If you ever build a version 2.0 try using a 3.5mm audio jack as a slip ring. I had a lot of success with that.

Really cool project, you surely prevailed with this challenge! A bulldozer with a winch would be fitting but I would like to see overcome another challenge: A tractor with accessories, like a seed spreader or brush, a grapple for logs.

I think an articulated loader or a bulldozer would be a great next design. It would continue the construction site theme and give a way to move around push a larger pile around.

YO THIS IS THE BEST ONE YET you should also try to build a forklift!

The best KZfaqr I found working for big boys' dreams with 3D printer. Thank you ProfessorBoots! Legend!!

These projects are amazing, I can't believe how well designed they are. I'd love to see an articulated front end loader as the next project.

This is one of the finest diy projects on the entire internet!

Super cool. Just ordered all the parts for it. Cant wait to assemble.

Very excited about your design changes, especially those that will allow more features and expansions for future projects.

Nice you should build a semi truck with changeable beds

Forklift or telehandler would be fantastic! I'm going to buy and make all three. Great work

you do an incredible job making the videos and an equally as good of a job making the actual model! I built the mini skidi and loved doing that looks like I’m going to be building an excavator next

This RC excavator is seriously next level! Definitely a game changer! 🔥

Really great work. Consider wrapping the boom wires with stiff bendable wire and sealing with meltable wall heat shrink. Position to emulate hydraulic lines.

Absolutely amazing! Fantastic production and product 😊

Impressive project!

Very cool, got a new sub. Loved those directly printed tracks, going to try that in resin for smaller scales.

Honestly a working crane would be insane on a truck or not but that would be sick to have and it could actually pick up stuff and move it with different attachments like magnets, hook, straps, or a bucket.

Absolutely brilliant mate

Another Absolutely great build . A forklift would be another great desk toy to add to the collection but you could up it to a telehandler. A mobile crane would also be awesome. Keep up the great work hoping to build these sometime soon.

Stormy says that’s rad. Definitely my favorite so far!! ✨🤩

Awesome!! I'm still finishing my dump truck but I'll be planning to build this one!!. +1 for a Semi to haul these things around.

Amazing work, well done. Thanks.

wow, OMG, this is fantastic. An Aerial Work Platform would be awesome!

amazing work, absolutely fantastic!

Bravo, subscribed! Looking forward to more!

Really cool project, mate. Well done!

professor boots is typecasting into "professor desktop RC" and I'm here for it.

These functional small scale projects are great! I'd like to see a mini mobile or crawler crane at some point.

That is such a clean build, nicely done and very entertaining video! Hope this gets the views it deserves :)

One of those big construction site tower cranes would be cool.

I have been waiting for this video! Excavators are my favorite machine to run! Great job! 😁

sooo cool, thats engineering at its finest ! definitely need to build one eventually, excellent work mate keep it up !

Very professional man ! I love all of your projects

This is soooo COOL! You are amazing!! Great work!!

Awesome project. Maybe I will build it once for my nephew ^^

that’s super cool. a crane, backhoe, or semi truck would all be really cool

Awesome, man!

Amazing! Great Job!

love the models u make!!

this is so awesome! im definitely gonna buy this one. next you should make the liebherr r 9800

for future tracks I would strongly recommend an adjustable tension system. Real tracks use a ram that is tightened by adding grease. A screw should work just fine. And only the very front wheel is adjusted.

I hope you make thousands of dollars from these projects. These are absolutely amazing

Awesome loved it!

Killer work man!

Im definately gonna make this at some point, ive also never seen thise awesome luttle motors

dude you're incredible. Im making my nephew one today.

Insanely cool!!! awsome work!!

Amazing, subscribed. One of the best channel definitely 👌

This is so GOOD!

Awesome project!

a big bud tractor! cool project

DIY of the year 🎉

I’ve been waiting for you to make this video

Love your content!

I think a tractor would be a nice next project as it allows for a ton of different tools and attachments like a front loader, a winch, different trailers or agricultural tools like a cultivator, seeder, baler etc.

I'm gonna put my vote down for a logging forwarder :) Something like a Ponsse Elephant :) Those are the kings of picking up stuff

Wow, very cool!

Absolutely a telehandler!

Great video, I will try doing it in the future. Imagine putting a fpv camera in the cabin tho.

Love the videos, I think a semi truck and lowboy trailer to haul the excavator and skid steer would be awsome!

So cool! I would like to see a 3 or 4 axle crane truck

Great video & build. I'll vote for a Telehandler

This might be a good platform to build a small inspection rover, I have been wanting to make one to send into crawl spaces

A tigercat version would be SICK

very cool this little excavator!!next a little dozer!!!

WOO the excavator is here!

Incredible! If you need someone to design the PCBs I'm here 😊

Omg dude. You outdid yourself with this one. I was impressed with the skid-steer and dump truck. Lol. Good job. And next, I think a dozer would be nice 👏. Cheers from 🇨🇦

I’m going to order a mini skiddy soon I can’t wait

You have done a fantastic job 😍😍

Best one yet. Next time you should do something, that can fly.

This is far more impressive than I thought it would be.

Creative video, thank you :)

dude this is awesome! Epic one, and the electronic side!! woow!! now do a submarine!!

I have been waiting for this

An alternative to having to pass through wires to the base could be to try and design a mechanism that lets you drive the tracks without needing to have motors in the base. I think it should be doable with some clever gearing and control mixing in the ESP32. The simplest way I can think of would involve coaxial shafts and bevel gears.

Amazing really. I just made the subscription and ordered the PCB. Let the game begin 😂.

Excellent!!!! cant wait for the kit - next project - crane! Liebherr Crawler Crane LR 13000

i would use PCF8575 IO Expander Module that runs I2C but what a great project!

Pin jib crawler crane. No "hydraulics" except the tracks, winches for the hoist and luff! Good luck 🙂

That's an impressive toy

V1.2 you could make your own clock ring if you incorporate c spots for contact strips in you 3d print design.

This is awesome! I want to get better at modeling, im still doing basic shapes...

This is awesome

that was a art of mechatronics thanks for your good video

so cool!

Perfect!

Estou a um ano modelando aos poucos uma escavadeira para usar com esp32. Minha maior dificuldade era recursos. Tinha muitos servos sg90. Então modifiquei eles para 360 e usei nas esteiras e no sistema de giro da parte de cima. Também usei eles na lança e garra. Por último fiquei uns meses pensando em um jeito de não enroscar os cabos. Comprei conrctores p4 (de fone de ouvido) para plugar entre as esteiras e a plataforma, no p4 vai enviar o sinal pwm de cada servo da esteira+ Gnd + 5V. assim consigo dar infinitas voltas sem ter problemas. Comprei pela internet os conectores, estou aguardando chegar para testar. O sistema que você pensou para usar na lança na garra é genial! Parabéns pelo projeto.

That thing is sweet!

this is awesome