Add a comment below on what attachment you’d like to see made for the MiniSkidi.

You should make a mini forklift! We can all live our dreams of being forklift certified!

I just got my V3 and I have it put together already. This project works great. I originally ordered the v2 but he had shipping issues. He sent me and email and offered to upgrade me to v3 at no cost. He even included a hand written note in the package. This is someone who clearly cares about his customers.

Just received my electronics kit in the mail and had it assembled and ready to test within 10 minutes of opening the package. What a fantastic experience for someone with amateur level experience in electronics like myself. What a great product, and a great model. Can't wait to try out more of your stuff!

I didn't think it could get any better

The scale details on the warehouse shelf and pallet were really nice!

As I work in a warehouse, we are definitely building a life size obstacle run

the obstacle course made this a masterpiece. the swinging section was the best!!

I just got my miniskidi v3 parts and the included note was by far the coolest thing I've gotten with something I ordered online, your a youtuber but still hand wrote a note included with my order that right there shows commitment and I know it wasn't much but that put the biggest smile on my face and I haven't even begun to build my miniskidi. Thanks for your hard work and the wait was more than worth it.

Fenix also appear offer a 800mah 16340 cell with a USB-C port for a couple dollars more. Great projects, love seeing your updates!

The mini skidi is basically a good as it gets! Next up should be an excavator to dig up all my failed print scraps. love your work!

6:49 The rattle is actually more realistic than you'd think. Real equipment quickly gets wallered right the fuck out as they run 'em hard and put 'em up wet on the jobsite. That slop is still tighter than it would be on a real skidsteer!

Might be a good idea to check out some LEGO tracks as they are cheap and made out of real rubber. Printing tracks might be a challenge for some users!

Bought the kit, built the kit, love the kit! Thank you for designing and sharing this.

Upgrade idea: Different PCB so you can youse the motor controller but instead of a phone a 2.4 gh receiver. But cool project and I am wating for your next videos.

I found the video very amusing! ❤😂😊 new brother has been born welcome to the family Skidsteer 3.0!

For those who balk at the price of those battery cells, you can save some money by buying a bigger pack and sharing with friends (I've seen 8 packs for ~$40 that also take USB-C plugs which is probably more convenient than a USB-micro). Alternatively, you could get some regular 16340 cells, those usually come in a multi-pack that works out to about $4 per cell, with a USB charger block, and not having the charging circuitry in the cell gives you more capacity. Not sure what sort of low-voltage protection is built into those Fenix batteries, but if you get regular cells you'll have to keep an eye on that yourself. Either way I guess once you get below 2.5v per cell (so 5v total) everything will start to go wonky and that's still not *terrible* for Li-Ion cells.

Gained a sub. My youngest loves construction stuff and was losing his mind over this video, especially when you said excavator was next. I’m savvy with my bambu and fusion but your pcbway knowledge is out of my league. Again, great video and the lesson plan page is next level. You deserve a million subs.

Wow !! Great you havent shipped to Europe before… Is the the 3.0 shipping to Europe?

Congratulations! It got a lot of fans here in Brazil! Gratitude! Parabéns! Conseguiu muitos fãs aqui no Brasil! Gratidão!

Love the video. Tune down the background music a tad bit in future videos🤙🏾 thanks. Been following this build since the beginning. Looking forward to mini excavators as well🤞🏾

dang man this is so sick, good work!

Simply amazing work!! 👏👏

It’s perfect now I think you should build an excavator

It's so well designed。I love your work, and I love your videos even more

I'm so excited about the latest updates to the mini skiddy! I can't wait to get my full kit!

Just started assembling mine, and it is so easy. I can't wait for the mini ex!

This is awesome, I want to build one now!

I am so gona build this once I have finished my hot wheels eco conversion! You should do one!

Bro loving your mini skiddy projects! before long you're going to have a whole mini jobsite!

Hello I am Flynt I am 11 years old. I really want to build your RC skid-steer V3.0 but I can not afford the electronics kit I was wondering if I can buy just the screws and the custom PCB board Thank you for considering this from Flynt in Australia. My mum tried to contact via your website but the phone number format wouldn’t work.

This is amazing. My 2.0 is jealous.

really impressive! nice work

That's Awesome I like that you put the lights the same place I did. I still need to get a video of my mini fleet.

Is it possible for the controller to use two joysticks to operate it like a real machine? I assume it would just be a little bit of JavaScript required

Ughhhhh your killing me man! I havent even built the 2.0 yet and here we are.

Just bought skid steer thanks Batteries on the way also

Neat little thing! I'd actually be interested in adding one of these to my collection if it was adapted to use traditional RC components. I've got a Futaba 16IZ I'd prefer to use! And an Orlandoo M02 which would be a neat transporter alongside the trailer.

you deserve so many more subscribers

Damn, I'm about 3/4 done printing v2. Might just use these to test tolerances before moving to v3 files. Ordered my kit, thanks!

This looks amazing!! I am really curious if i could make a crane on this scale! Maybe soon going to try

Hi, first of all, thanks for all your hard work. my 3 y/o son really enjoys the Skidsteer, its his favorite toy by far. i did however, edit the code to be more maintainable, readable and and easier to add now features. I'll finish it and do some tidying up. I'd be very happy if you'll take a look as i think it could help you with future projects and its my way to give back a bit to some who i really appreciate. again, Thank you for you work:) Guy

Mo Powah Babbby!

It would've been cool to see these machines cooperate with each other in kinetic sand(I think that simulate dirt for small scale). To lift, dig and get some track marks 😎

Fun stuff man

Just saw this today scrolling through printables

U R a great guy!

Put a pre-order in for those electronics! It’d be cool to use those obstacle course parts too!

There are tracks that are made to fit over the tires with only the 2 points instead of 3.

That obstacle course was hilarious! I've got heaps of brushed RC speed controllers sitting around and a new very capable transmitter, so I think I have to give this a go. How much does it weigh assembled? If I can get it under 150g I could put it into a combat arena....

So awesome haha

Id love to see PWM/Analog driving and a remote

Love the updates! Still no auto level on the bucket?

Awesome 😎❤️✨

does the new lid with lights fit on the 2.0? dont have the filament to print the V3 but would love the lights lol. Also love the build

That is so cool!! Will we be able to built it ready to run with the complete Kit or do I need coding skills etc? I am an absolute beginner 😃

Some CAD design tutorials would be nice.

You should add a physical controller to the mini skidy

Simplismente incrivel! Poderia fazer no proximo projeto uma escavadeira com braço articulado 😅

Great video! Do you know if there is any way to hook a flysky controller to the mini skidi's pcb.

Hey! Thinking of grabbing the kit to make for my son. Question.. Has any testing been done with sand or dirt? I am curious how resilient the design is in terms of stuff getting into gears etc. Thanks!

Waiting for the tracks to finish printing, then I need to do the claw because I missed it wasn't on plate 2.. but I have almost everything else assembled. :)

For the clips to hold on the bucket, it would be easier to remove if there was only a single clip. Also for things that need to flex, using more flexible materials tends to be better, PETG is better than PLA for clips and buckles.

Fucking awsome project!

Question, would it be possible to just use the style of quick disconnect (SSQA) like a real skid loader uses?

hey boots i have a slight problem with my miniskiddy, it looks like the motors have no torque to move it or lift the arm. any ideas?

would be nice if we could use an ELRS RX rather than wifi

how about if u only want the ProfessorBoots PCB ? im from Sweden. Dont facey to order a full kit, when i only need the PCB! :) so cool build! love it.

Hi, maybe I'm wrong but I can't find gerber files anywhere and the video description mentions it. Would it be possible to add it? Thanks a lot, great model

Hello, I built this SkiddSteer with a PCb 3.0 but my motors doesnt works. My servo works breat. Thanks for your help

Adding fpv is all it needs

I didn’t know I needed a mini skiddi

I want to see a mini excavator!

What are the exact specs of the n20 motors? RPM and voltage?

Before I start printing, this, can you run a normal ESC in receiver and motor

This is my kind of video

Is there a wiring diagram anywhere? I’ve got all the components myself but would be helpful to refer to a diagram to get it soldered up.

Do I have to buy the circuit board or is there a circuit diagram? I would like to build the device completely myself.

Im sure it shows it somewhere but what are you using for the remote? is it a phone app or an actual remote?

Is it possible to get the schematics for v3.0 as we have for the earlier version?

Why do you use two motor divers, when they are a dual motor driver?

I ordered mine and got it in, now I want to print a second one. I wish I knew how to run it using a regular 8 channel rc transmitter.

Hello. I live in Vienna, Austria. Is it possible to order electronics for mini skids.

Lovin' the updated Mini Skiddy! You said the new motors can handle 12V, could ur electronics handle an 11.1V power source rather than this versions 7.4V?

in the link for the code and Gerbers, i cant find the Gerbers for the V3.0. is there a reason these files are not available?

We need a komatsu d355a.... Also need to model city hall buildings and a hardware store

how do you find the new mini skidi Cricut board

Shipping to Australia? :)

When will we be able to buy different colors of it?

I just finished printing this little masterpiece. What rpm motors are recommended?

Nooooo, just finished building my second v2 and dump truck!!!

After the excavator can you make a semi truck?

Will the kit ship to New Zealand?

It needs a counterweight to help with the balance

Do you plan to ship also outside the US? Would be great!

nice upgrade! could you upload the STLs separated? so i could print it on my voron V0.2. thanks!

Can you sell a conversion kit IE just a circuit board with battery holder, fuse holder, and headlights to allow us to upgrade a 2.0 to a 3.0?

Any ideas when the preorders are going to ship out?

How do I order a PCB as I'm in the UK so cant order an electronics kit.

There is a AA Li-Ion battery that gives 4,2 V and 2000mA