Profitec Pro 500 PID: Internal Tour and Component Identification

Рет қаралды 11,682

Күн бұрын

Take a detailed tour of the internal components of the Profitec Pro 500 PID espresso machine. Learn the functions of components and their location within the machine.
Related Videos
Profitec Pro 500: How to Remove/Install the Housing: • Profitec Pro 500 PID: ...
Chapters
00:00 Introduction
00:20 Reservoir & Components
01:55 In-Line Particle Filter
02:05 Pump
02:40 Valve Tree
02:5 Solenoid Valve
03:10 Non Return Valve
03:58 Boiler & Internals
04:20 Water Fill Probe
05:04 Heating Element/PID Probe
05:48 Water Fill Probe
06:18 High Limit Resets
06:38 Safety Valve
07:09 Vacuum Relief Valve
07:50 Steam Tap
08:03 Relays/Control Board
08:18 PID & Lamps
09:18 How the HX Boiler/E61 Works
12:10 Valve Tree Brew Side
13:15 OPV: Over Pressure Valve
14:15 Brew Switch
15:30 Face Components
Talk to our experts via chat or email: www.wholelattelove.com/contac... Latte Love on Social Media---------------------------------------------------------► Follow Whole Latte Love on Instagram: / ► Follow Whole Latte Love on Twitter: / wholelattelove► Like Whole Latte Love on Facebook: / wholelatteloveonline

Пікірлер: 35

@tonyb83 2 жыл бұрын

Excellent. I wish this description of the plumbing and how it works was done for all machines. Only when one understands the plumbing and how it works can one have a sensible discussion about operating the machine.

@Wholelattelovepage 2 жыл бұрын

Hi Tony, Thanks for the comment. Stay tuned - more internal tours coming for other machines.

@hqrsyd 2 жыл бұрын

Thanks so much for showing us these service videos!

@Wholelattelovepage 2 жыл бұрын

Glad you like them and thanks a whole latte for taking a moment to leave your comment - it's appreciated! Marc

@Kats072307 2 жыл бұрын

This is amazing job. Very analytic, and very good knowledge of the mechanic parts from both of you

@Wholelattelovepage 2 жыл бұрын

Hi K, Thanks for the the kind comment - we are passionate about these machines and supporting the home espresso community. Marc

@davecrabbe4579 2 жыл бұрын

The SSR in this model has been known to blow.. likely because it was improperly designed for only the amount of current in the 220v european system. It is in a "hot" ambient location which contributes to it failing, sometimes in a puff of smoke. Because of the potential fire hazard, you'd be best to relocate it to the rear of the unit.. at the very least ensure it has thermal paste underneath it.. HB has many threads on this failure.

@bjdejesus7223 2 жыл бұрын

very useful video for a technical parts. please try to do the same in the bigger machines like Cimbali or La Marzocco (commercial use)

@Wholelattelovepage 2 жыл бұрын

Hey BDJ, Thanks for the comment and request. Will see what we can do!

@aboteaf Жыл бұрын

Thank you, it is full of excellent details. I have an issue with my machine and hope to help me here :( I feel that the building up pump pressure very slow, it is still 10 bar when check it with blind filter but it take long time to reach. Now While brewing the coffee it almost took the same time over 30 seconds no matter playing with the grinder if it fine or little fine, for example dailing my grinder from 1 to 2. Even if I make a little course than the usual espreeso grind!!

@Wholelattelovepage Жыл бұрын

Hi a, You are welcome. Sounds like you have a flow issue elsewhere in the machine or perhaps a pump issue. As you likely know, pressure on the machine gauge is read from a point relatively close to the pump. First place I'd check are parts behind the point where the little tube connects into the system for the pressure gauge. I'd also check your flow rate from the group. When operating properly, this machine should producer a flow rate of ~6-8 grams per second (same as milliters per second) If your in that range you may have a bad gauge. If below that range there's a blockage or faulty pump. Here's a very detailed video on diagnosing and repairing flow issues in the Pro 500: kzfaq.info/get/bejne/iNekn5hmxJ6wl3U.html Hope that helps!

@lltnt 2 жыл бұрын

good!

@Wholelattelovepage 2 жыл бұрын

Thank you! Cheers!

@DavidSmith-rz1pc 5 ай бұрын

Thanks for this video. I am curious to know what type of metal the boiler components are made off, especially the surfaces that are in contact with the water being heated to enter the group to make the coffee. If there is aluminum then that would be a no go for me! Is the solder lead free? Also I am not quite sure what the dial on the right is telling me versus the left dial. Should they both be at 12 o'clock? Thanks

@restauno 4 ай бұрын

hi, thanks for the well explained video. What could be the cause of 2 groups not being able to operate simultaneously? Working ok by separate, but when triggered together, one stops brewing. This is in an MA-C-2GR expobar monroc of 2groups. Thanks.

@Wholelattelovepage 4 ай бұрын

Hi r, unfortunately I do not have that machine so cannot offer a solution.

@bigoldawg2791 8 күн бұрын

Hey guys! Where does the replacement o ring go by chance?

@bjmulroy 2 жыл бұрын

Thank you for these awesome videos. Your online tutorials are greatly appreciated. Any thoughts as to why my machine doesn't have the hissing sound as of late and does not appear to be heating? The high limit switches are fine. The machine is about 3.5 years old. I have a new heating element and static relay on order. I am hoping it is one of these two. Any input is appreciated!

@Wholelattelovepage 2 жыл бұрын

Hi b, You are welcome for the videos! The static relay is one potential cause. Here's a video showing how to diagnose a static relay and replace if needed: kzfaq.info/get/bejne/idN8mMygmJzafac.html

@bjmulroy 2 жыл бұрын

@@Wholelattelovepage I went looking in the machine after this video, and I think I stumbled across the answer. The nut on the autofill sensor was rather loose. I tightened it, and it has been working great since. Perhaps it loosened over time due to the vibratory pump and steam was escaping through there. I have a new heating element and static relay here if needed. Thanks again!

@andrewwells8619 2 жыл бұрын

Thanks for the excellent videos. I have followed the instructions in your E61 brew group maintenance video with great results - it is now much smoother to operate. But I wanted to ask a question about the vacuum relief valve. Mine (which is less tall than the one on your machine) has recently started emitting steam continuously when the Pro 500 is at full temperature, leading to a lot of condensation under the top tray. My guess is that I simply need to replace the valve. But I would be grateful for any advice.

@Wholelattelovepage 2 жыл бұрын

Hi Andrew, You are welcome! Happy to hear you had great results with E61 maintenance. Here's our video on how to clean or replace the vacuum relief valve on the Pro 500: kzfaq.info/get/bejne/qJaam8-gxM2uZYE.html Marc

@andrewwells8619 2 жыл бұрын

@@Wholelattelovepage Marc, Thanks for your reply - it's very generous of you! I guess I should have been able to find that video, but I hadn't. The details are very helpful. I shall be trying to clean and descale my vacuum relief valve, and hope I don't have to replace it. Andrew

@Wholelattelovepage 2 жыл бұрын

@@andrewwells8619 NP’

@mcgovernjimmy 2 жыл бұрын

Can that vacuum relief valve be replaced with one that allows it to be routed to the drip tray... so it's not venting inside the machine? I know that's a feature of the 600. The 500 seems behind on that feature.

@Wholelattelovepage 2 жыл бұрын

Hi Jimmy, Thanks for the question. There are vacuum relief valves available with a nipple allowing for a hose connection. There's no stock outlet to the drip tray on the 500 but you could put one in. Should mention that very little water is released by the vacuum relief. A very small amount of steam and it spits a few drops right before the valve closes. Given the location of the valver atop the boiler and the internal heat in that area the steam rises out of the machine along with any water which quickly vaporizes. Some manufacturers put an inch or two of open ended hose around the top of the vacuum relief to catch the few spurts of water and hold there until it vaporizes. Marc

@bigoldawg2791 2 ай бұрын

Hey guys! Got the profitec 500 pid from you about a year ago, did a backflush and cleaned the tank but now im getting 0 bar of pressure on static and about 3 bar on shots, are my valves clogged or did my pump fail?

@Wholelattelovepage 2 ай бұрын

Hey bod, have you conntacted our tech support staff? If not reach out here: www.wholelattelove.com/pages/contact-us

@Sammiecheeks16 2 жыл бұрын

Hey thinking about buying this one how is it if I need to make 4 lattes in a row can it handle that and how long would it take

@Wholelattelovepage 2 жыл бұрын

Hi Smanatha, Thanks for the question. Yes, the machine can do 4 lattes in a row. How long depends on how big your lattes are. For a typical specialty cafe size of ~6oz/180ml each made form a single shot of espresso you could split a double shot into 2 cups and froth your milk at the same time as your espresso was extracting. By the time you pour those and grind/tamp your next double the machine will be ready to make the next 2.

@braceface1979 2 жыл бұрын

Maybe you can show other brands than ECM/Profitec ? Or is there any sponsorship involved?

@Wholelattelovepage 2 жыл бұрын

Hi b, Thanks for the request and question. No sponsorship involved in these videos. We will be including brands like Rocket, Bezzera and more in the future. We are working are way through machines and started with most popular, top selling products. Marc

@braceface1979 2 жыл бұрын

@@Wholelattelovepage Hi Marc, thanks for your reply. That’s sound great. I’m looking forward what you can show us for the Rockets.