Program VW Key After Battery Change - Synchronizing VW Key FOB

No video

Program VW Key After Battery Change - Synchronizing VW Key FOB

Рет қаралды 63,583

Күн бұрын

How to synchronize your VW key if your key FOB stops working: the VW key FOB can stop working if, for example, there is a battery change or if you are using the key FOB out of range too many times.
HOW TO REMOVE VW KEY HOLE COVER • VW Emergency Open Door...
#vw #cartips #carknowledge

Пікірлер: 50

@kristlouis5533 3 ай бұрын

Thank you so much! I watched and tried to do this with 7 other videos! I couldn’t get the aux lights to come on so I hooked up a power bank to jump the engine when, of course, the alarm went off. So I followed your direction and we are on the road again after a battery change for the fob and your perfect instructions! ⭐️⭐️⭐️⭐️⭐️

@WheelsTips 3 ай бұрын

You're so welcome and thanks for watching my video! Glad I could help fix your VW key, enjoy the car!

@erikadanai Ай бұрын

what year do you have? its not working for me. did your key fob blink red when trying to unlock? should I get my fob battery changed? mine blinked red but it still didnt work

@mbusojama6426 3 ай бұрын

First didn’t know this soo sent the car to dealer they diagnosed the key and told me need to get a new key as my key was faulty, paid for the diagnosis without being held saw yr video did same steps u did and wala my key is working thank u soo much saved me alot of money 🙏🏾🙏🏾

@WheelsTips 3 ай бұрын

Thanks a bunch for watching my video and taking the time to share your story, greatly appreciated. I’m glad I could save you some time and money, enjoy the car!

@gerryosirus9748 3 ай бұрын

Worked perfectly as you suggested. You saved me a few dollars going to dealership or the locksmith. Virtual high five!

@WheelsTips 3 ай бұрын

Glad it helped and thanks for watching my video! Virtual high five back!

@thabisokwena2604 4 күн бұрын

My key does not want to synchronise but it can open the car and start it it does not want to synchronise,what could be the problem?

@alij.7390 4 ай бұрын

Fantastic brother, worked perfectly! Thank you!

@WheelsTips 4 ай бұрын

You're so welcome! Glad I could help program your VW key, enjoy the car.

@dalstonspencer2470 3 ай бұрын

What if you don’t have an ignition for the key. Just the key sensor

@WheelsTips 2 ай бұрын

Thanks a bunch for watching my video and taking the time to comment. Do you have a removable ignition button?

@WhitneySpaulding-u9j 12 күн бұрын

I need to get a completely new key that has never been sinked to the car will it work?

@WheelsTips 9 күн бұрын

Thanks a bunch for watching my video and taking the time to comment. To the best of my knowledge that will not work, the needs to be programmed to the car and then synchronized. Please share an update, thanks.

@Ethan_Joseph22 Ай бұрын

I tried it a few times and it is still not synchronised? Need help 2010 vw golf 6 tsi 🙏🏾🙏🏾

@WheelsTips Ай бұрын

Thanks a bunch for watching my video and taking the time to comment. May I ask how your key lost its synchronization in the first place? Is the battery in good condition? Appreciate any update, thanks.

@AlexGribbenMentoring 6 ай бұрын

Thanks so much that worked really well saved me a money taking it to a garage

@WheelsTips 6 ай бұрын

You're so welcome and thank for watching my video. Glad I could help program your VW key, enjoy the car.

@ThedigitalAfrican Ай бұрын

Is it worth removing the cover? You can still insert key with civer rigjt? Like normally?

@WheelsTips Ай бұрын

Thanks a bunch for watching my video and taking the time to comment. If you have a hole to access the key tumbler, I wouldn’t take it off. This is for when the keyhole is covered.

@theronginn7452 8 ай бұрын

Thanks. Worked on 2006 GTI after installing new car battery

@WheelsTips 8 ай бұрын

Glad to help and thanks for watching my video!

@Murphysticks Ай бұрын

Fixed! Nice man.

@WheelsTips Ай бұрын

Right on and thanks for watching my video! Glad I could help program your VW key, enjoy the car.

@darinadoncheva2022 Ай бұрын

Hello from Eastern Europe! Can you give me an advice how to check battery for FOB with the light - when close to the car or out of range. I have an error ot board: error keyless system and dont know from where is the problem. Mechanics in my town dont have an asnwear. Read some opinions that may be from the FOB battery. Thank you!

@WheelsTips Ай бұрын

Thanks a bunch for watching my video and taking the time to comment. Funny 2 people have complained about the exact problem at the same time. I am not sure what car you have but you may want to check for water damage, specifically in the passenger footwell to see if you have a module effect by water damage. Please share an update, thanks.

@WheelsTips Ай бұрын

Additionally I have seen people have issues with the Keyless entry module, which you can get rebuilt for a lot less. Google search, repair and return keyless entry module for Volkswagen. There are places that will bench test your module if you send it in to see if the module is malfunctioning. Please share an update, thanks.

@johnnycanuck6923 4 ай бұрын

why remove the lock cover?? what does that do?

@WheelsTips 4 ай бұрын

Thanks for watching and taking the time to comment. I take the cover off to insert the key.

@a-jack2980 2 ай бұрын

What if I have a keyless start? My car is a 2019 VW Passat Wolfsburg edition.

@WheelsTips 2 ай бұрын

Thanks a bunch for watching my video and taking the time to comment. To the best of my knowledge you will need software to program that key. If you find something else that works, please share, thanks!

@chamer84 Ай бұрын

I have a 2012 passat. FOB got slightly wet the other day and the unit is a little beat up. I put a new battery in it and it worked fine a couple days. Now I am getting Key not in range over and over. I tried this and it is not working. Any ideas?

@erikadanai Ай бұрын

same here. just got the car battery replaced Monday. now its Wednesday and the key wont work after trying this 3 times, but it was working fine this morning. the dash lights wont even come on when I turn the key without starting the car like he said.

@WheelsTips Ай бұрын

Thanks a bunch for watching my video and taking the time to comment. You may want to just make sure you don’t have any water leaks especially on the passenger footwell. Next I would try a hard reset, making sure you have your radio codes and whatnot. If all fails you may want to scan the car for faults in other modules. Please share an update, thanks.

@WheelsTips Ай бұрын

If you have an intermittent issue like this I would check for water damage to your modules, like the BCM which is under the passenger footwell often times and on older models can get water damaged. Please share an update. This usually happens from poor sunroof drain tube maintenance.

@WheelsTips Ай бұрын

@erikadanai Ай бұрын

@@WheelsTips THANKS! I will look into these suggestions

@SilverSergeant 7 ай бұрын

Worked perfectly for my 2019 Tiguan.

@WheelsTips 7 ай бұрын

Thanks a bunch for watching my video and taking the time to comment. Glad I could help program your VW key, enjoy the car!

@kenmartinez8247 19 күн бұрын

I have a 2008 vw jetta didnt work, i had to replace the battery after that no lights nothing

@WheelsTips 18 күн бұрын

Thanks a bunch for watching and taking the time to comment. You may have to try a few times, please share an update.

@mistersniffer6838 2 ай бұрын

I dont have an ignition :(

@WheelsTips 2 ай бұрын

Thanks a bunch for watching my video and taking the time to comment. You don’t have a removable button?

@mistersniffer6838 2 ай бұрын

@@WheelsTips - On the door. Car is push start. Either way, battery in remote was dead. Thanks for the video and response.

@thatboyfrostyyy 2 ай бұрын

Did you find a way to do it?

@gregbeland2898 22 күн бұрын

tried this on my 2018 golf and didnt work. This was after changing the car battery. It locks and unlocks all doors except the driver door

@WheelsTips 22 күн бұрын

Thanks a bunch for watching my video and taking the time to comment. You may want to give your car a full system scan to see what fault codes are present. Also with a full access scan tool you would be able to track different values when testing for optimal diagnostics. Please share an update, thanks.