Progressive Heavy Duty Springs & Dyna Tube Swap | +2 FXLR FRONT LIFT 2019 M8 FXLR Lowrider

No video

Progressive Heavy Duty Springs & Dyna Tube Swap | +2 FXLR FRONT LIFT 2019 M8 FXLR Lowrider

Рет қаралды 5,023

Күн бұрын

SUPPORT THE CHANNEL:
Insta360 Affiliate Code:
www.insta360.c...
Find the parts on Amazon! 🡲🡲 amzn.to/3Qtz61A
Use Code "RODRIGUEZ1016" at www.originmaine.com for 10% off!
Join the Patreon: www.patreon.com/krdmoto
Shop Tecovas Western Wear: tecovas.sjv.io...
Save 15% at Cardo Systems 🡲🡲 cardosystems.re...
Motovlog & Video Gear we use [Amazon] 🡲🡲 a.co/4AkUdpd
Motorcycle Products [Amazon] 🡲🡲 a.co/0eTqXWh
Computer Setup [Amazon] 🡲🡲 a.co/hHhbY2J
INSTA360 Links:
ONE RS: www.insta360.c...
GO 2 Small Portable Camera: www.insta360.c...
ONE R: www.insta360.c...
ONE X 2: www.insta360.c...
Drone Flyers (Sphere Mount) www.insta360.c...
SYNCO Microphone: amzn.to/3Tpy9Jw
DEITY Microphone: amzn.to/3x4l9j9
Our Camera: amzn.to/3x4l9Qb
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission at no additional cost to you! Thank you for supporting me so I can continue to provide you with unbiased, authentic motorcycle content!
Have you seen our 1,000 miles in 24 Hours trip?!
• DYNA RIDES 1,000 MILES...
New? SUBSCRIBE to help me reach my goal of 10,000 subscribers!
Stay Up to Date between videos!
/ connorfxdb
Save 15% off at www.firstmfg.com using code: CR15
Our GoPro Setup:
bit.ly/Motovlog...
Motorcycle Parts/Gear:
bit.ly/MotoParts
Our Desktop Setup:
bit.ly/COMPUTER...
Camera Gear:
bit.ly/Camerage...
Disclaimer: Some of these are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
#dyna #softail #fxlrs

Пікірлер: 37

@bigpowerhouse11 Жыл бұрын

Why did I not realize you had a youtube channel?!? I follow your Instagram and only found this channel because I want to do long dampers and heavy duty springs on my '95 Dyna. Great work bro🤙🏻 new subscriber earned

@ConnorFXDB Жыл бұрын

ayee howdy! Apologies for the late response. Cheers! Did you end up scooping the long dampers?

@bigpowerhouse11 Жыл бұрын

@@ConnorFXDB yes Sir I did! Haven't put them on yet just waiting for a set of +2 rear shocks to be back in stock soon👌

@FattyMcJason 4 жыл бұрын

Nice setup! That wobble was crazy, glad you got it figured out.

@ConnorFXDB 4 жыл бұрын

haha still not fully figured out! but its not quite as jumpy in the turns haha Cheers brutha!

@FattyMcJason 4 жыл бұрын

ConnorFXDB Scary man, have you looked at the neck bearing?

@ConnorFXDB 4 жыл бұрын

@@FattyMcJason yes yes I have. I took it in for 20,000 recommended fallaway check and came out with flying colors. Could just be the road section at that speed

@MOTOSARGE 4 жыл бұрын

Enjoyed it brother. I need to show my dyna some love in the suspension game too.

@ConnorFXDB 4 жыл бұрын

cheers! I hear ya! My dyna never got any upgraded front springs -- even at a cheap upgrade its still an upgrade! I cant wait til I can eventually drop $$$ on a truly proper setup. One day! lol cheers and thank you for watching!

@WildOn2sVlog 4 жыл бұрын

Good illustration. Thx for the vid

@ConnorFXDB 4 жыл бұрын

cheers!! Of course! Thank you for watching and thank you for the feedback!

@JorgeL1 2 жыл бұрын

Just found your channel. Nice dude! I’d like to get an extra 3” of ground clearance on a 2019 fxlr (not s). What set up would you recommend to do it? Ideally inverted front forks. Thanks in advance my dude. Awesome vid!

@ConnorFXDB 2 жыл бұрын

howdy Jorge! nice! Team FXLR! for inverted you could look at the FXDR fork tubes (you could do FXLRS triple trees and uppers) with a 1" extension. My buddy at Twisted T Industries has the FXLRS and ran FXDR tubes and the extra 1" extension on the front - you would want to match the rear similar since youd have a longer front rake and itd handle a little more difficult with whipping it into a corner. For the rear you could snag yourself a custom 14.5"-15" rear monoshock from RWD (but some frame and swingarm modification is necessary if you run the stock swingarm or can buy a speedmerchant aftermarket one) I am running a 14.5" rear and did the same. You could search CONNORFXDB MONOSHOCK and it should pop up 2nd or 3rd video down

@JorgeL1 2 жыл бұрын

@@ConnorFXDB dope, thanks!

@jkizzy14 Жыл бұрын

2 years later….I have 19 FXLR and you’re saying to get 2+ all I need is stock dyna tubes with progressive springs and that’s all I need?

@ConnorFXDB Жыл бұрын

yessir! you could still run the stock FXLR Springs but will probably need a longer spacer inside - I just opted for the dyna length springs as well since i was going with dyna tubes

@PkwyDrive13 4 жыл бұрын

I got a 2016 FXDLS.. I really need to get me some front suspension.. I can't afford the fancy cartridges so I'm thinking of just getting patriot genesis springs with preload adjusters

@ConnorFXDB 4 жыл бұрын

Buddy recently put in the same springs and said he loved the upgrade. Stiffer and better ride than what he was used to. I will also be picking up some preload adjusters as well to try a heavier preload in these springs as I feel it may make it slightly closer to where I'd like it. Are you still running the OEM fork springs in the FXDLS? Cheers and appreciate the support Tyler!

@PkwyDrive13 4 жыл бұрын

@@ConnorFXDB I have heard pretty awesome feedback from people running the genesis springs with preload adjusters, especially for around $350. Yeah I still have the stock setup in my fxdls, cartridge on the left fork, spring on the right fork

@trevorhernandez9940 2 жыл бұрын

I’m new to the Harley world were your forks 39mm and you converted to 49mm just by replacing the tubes? Or were they 49mm to begin w. Thank you!

@ConnorFXDB 2 жыл бұрын

great question Trevor! and welcome! What Harley did you get? The fork tubes were 49mm prior and 49mm after - the difference was going to be the length I changed to get the added +2 height I wanted. You cannot swap from 39mm to 49mm and vice versa without changing the triple trees. Lmk if you have any questions or you can also message me on IG @connorfxdb . Id be happy to answer any future questions

@trevorhernandez9940 2 жыл бұрын

I ended up getting and 01 fxdl. And I’m looking to heighten and stiffen the front suspension. Other than that I love the bike!

@MrTheDays1 2 жыл бұрын

@@ConnorFXDB just added the same springs and + 2 damper from trackerdie, i called progressive and they told me to cut the spacer flush to the tube 🤷‍♂️ I did 1’1/4 will ride it later to see how it feels

@ConnorFXDB 2 жыл бұрын

legit! Lmk how you like the new springs

@jakechurch9585 2 жыл бұрын

Did u say you had the +2 caps on the stock m8 tubes?? If so can you send a link?? Please

@ConnorFXDB Жыл бұрын

I did not. I had them on the dyna. I found them on ebay but dont believe they are selling them any longer. For the m8 I just ran STOCK dyna tubes so it gave me a +2 as the m8 softails are 23.5" vs the stock dyna at 25.5"

@papatejas6021 3 жыл бұрын

Definitely gonna need to replace front end springs.

@ConnorFXDB 3 жыл бұрын

def need to upgrade! But my bank account is telling me to hold off for a bit! haha

@papatejas6021 3 жыл бұрын

@@ConnorFXDB i meant me lol

@Beertjebas81 4 жыл бұрын

Are you considering a dual disk brake setup .... Just asking??

@ConnorFXDB 4 жыл бұрын

howdy and thanks for watching! Yes in the future I am! I am also looking at upgrading my 11.8 front rotors to 13" As well as going with inverted gsxr front end with 2" drop trees but thats some ways off. Thank you for watching!

@henryfranklin5736 2 жыл бұрын

Is it 26 oz per tube or together for fluid?

@ConnorFXDB 2 жыл бұрын

for DYNA Tubes yes. If you're running OEM m8 tubes check your manual for the specified mm amount from the top of the tubes when compressed. I believe its 160mm (or 200mm I forget)