Project Doo Doo Wltoys 12428 Brushless Conversion, Restoration and Run.
Рет қаралды 2,661
2 жыл бұрынHello KZfaq and welcome to the channel!
Today's video we have the restoration and run of Doo Doo which is a secondhand Wltoys 12428 that i won in a KZfaq competition months ago!! You can view the original competition video at
• KSRNATE and I have tea...
When i got him Doo Doo was in pretty poor shape. So i decided at some future time i would treat it to a full restoration and possible brushless conversion. So that basically the them of this video!!! Results were a little disappointing, i'm thinking of swapping the motor for a higher KV one and or purchasing a programming card to see if i can improve the initial punch from the setup.
Ksrnate's KZfaq Channel: / ksrnate
Brushless Motor: uk.banggood.com/custlink/KvDh...
Brushless ESC: uk.banggood.com/custlink/mGmy...
Rear Axle: www.ebay.co.uk/itm/274957881301
Shock set: www.ebay.co.uk/itm/275000204869
Rear Axle Links: www.ebay.co.uk/itm/274778117695
Three Wire Servo: www.ebay.co.uk/itm/274778300945
Rear metal Driveshaft: www.ebay.co.uk/itm/275019683817
Front Driveshafts: www.ebay.co.uk/itm/275019684096
/ @theminiatureconstruct...
Thanks a lot for watching, please feel free to comment. Don't forget to subscribe and give the video a thumbs up!
@carloshnunez 2 жыл бұрын
Nice congratulations 🔵🔵🔵👍👍👍😀😀😀🔵🔵🔵
@theminiatureconstructionco4556 2 жыл бұрын
Thank you very much! 👍👍
@addicted2rcs49 2 жыл бұрын
Hey there my KZfaq friend, I love these rc buggies! There really good, I look forward to when you upgrade it to a better setup mate. Lol @ the state of it, to start off. Keep up the good work mate. 👍 👏 👌
@theminiatureconstructionco4556 2 жыл бұрын
Hello!! Yes it was very well used! I'm looking at possibly a higher Kv motor etc. Stay tuned!!! 👍👍
@grrfy 2 жыл бұрын
Top Level Bodging Sir.Will pass any MOT that will.
@theminiatureconstructionco4556 2 жыл бұрын
Hahahaha 😂. Can't beat a good bodge!!!! Have you tried that drone to yet?
@chrisharrison101 Жыл бұрын
A decent solder iron fine tip right on the grub screw has worked for me quite a bit as it's a bit more accurate for heat pinpointing
@theminiatureconstructionco4556 Жыл бұрын
I hear you. So far i've been lucky with the burner!
@islandrc-duke1972 2 жыл бұрын
Cool rc and upgrades,nice run
@theminiatureconstructionco4556 2 жыл бұрын
Thank you very much. Thanks for watching and taking the time to comment! 👍😄👍😄👍
@ksrnate 2 жыл бұрын
There was nothing wrong with that car!! My daughter wants it back now anyway 🤣🤣
@theminiatureconstructionco4556 2 жыл бұрын
Good evening!!!! Hahahaha thought you'd appreciate that vid. Poor Doo Doo what a state to let your RC's get into. It's tantamount to abuse is that, I'm very tempted to report you....😄👍😄👍😄
@ksrnate 2 жыл бұрын
@@theminiatureconstructionco4556 I know mate I'm sorry, but it had a good time! I bought that for my daughter and she gave it the beans everywhere 🤣
@theminiatureconstructionco4556 2 жыл бұрын
@@ksrnate it was refreshing to see to be honest mate. Looks like it had had a good time. RC equivalent of the walk of shame. 😄
@sbrc8725 2 жыл бұрын
Nice rebuild! When you go full mental a lot of stuff breaks and parts are getting a little harder to get🤙
@theminiatureconstructionco4556 2 жыл бұрын
True. Perhaps a fraction more mental then. 😏🙋👍
@VtuberLife Жыл бұрын
is there a budget friendly version of this ?
@theminiatureconstructionco4556 Жыл бұрын
Yes it used to be this! It wasn't long ago they were £50! He your looking double that here in the UK! I think they do a smaller version in 1:16 but I've never seen one for sale. Wltoys used to be the benchmark budget brand, unfortunately not any more. I saw one of there 1:10 scale trucks on Banggood the other day for £300! 😔
@wineff499 5 ай бұрын
Did you use a 2s or 3s battery? Does a 3s battery not improve the speed?
@theminiatureconstructionco4556 5 ай бұрын
If my memory serves me, it was 2s. And yes, if your esc will take it. 3s will give you more go. 👍
@wineff499 5 ай бұрын
@@theminiatureconstructionco4556 Does this engine heat up a lot?, I want to put this engine and a hobby wing 10bl120 esc and 3s battery, will it have a lot of cogguin?
@theminiatureconstructionco4556 5 ай бұрын
@wineff499 I don't think you will have any temp issues. If you're worried about it, put a radiator and fan on it. 👍
The Miniature Construction Company
Рет қаралды 4,3 М.
Tomley RC
Рет қаралды 84 М.
Plok Productions
Рет қаралды 52 М.
The Miniature Construction Company
Рет қаралды 108
Tomley RC
Рет қаралды 13 М.
INWAYUP | БИЗНЕС | МОТИВАЦИЯ
Рет қаралды 2,3 МЛН