Пікірлер
@nemiasoto2931
@nemiasoto2931 6 сағат бұрын
Theres also a gray mn82 i think its called mn82 pro
@nemiasoto2931
@nemiasoto2931 6 сағат бұрын
I think the motor in there is 270 or 280 not sure
@ohhi5237
@ohhi5237 17 сағат бұрын
if you order the bigger 2000? battery version, does it still come with the extra stock battery?
@kelly19734
@kelly19734 Күн бұрын
Hi I have bought one of these trikes , the instructions says you can put it in high speed gear as comes in slow speed mode from factory. Also says the led light can be turned off , I can’t work out how to do this , please can anyone help😊
@slebdad
@slebdad 2 күн бұрын
I’ll be keeping mine on 2s, thanks. 3s will be if I update to brushless.
@thibster5590
@thibster5590 3 күн бұрын
I haven’t run my boat yet, but seems it doesn’t have much steering range using the transmitter even in full rate. I can move much further by hand when powered off. Anyone else notice this?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 2 күн бұрын
It's quite manoeuvrable as it is, but there's always room for improvement. 👍
@grrfy
@grrfy 2 күн бұрын
I adjusted the centrepoint on the servo on this one,it wasnt even close, as can see steers ok now .
@KAarnagemAmolgada
@KAarnagemAmolgada 3 күн бұрын
have one ...just buy it ...super cool boat!!! mine 3s lipo it mini rips!!! mega fun!!!lol
@theminiatureconstructionco4556
@theminiatureconstructionco4556 2 күн бұрын
Yeah they are a nice boat! 👍
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 3 күн бұрын
It craves brushless
@theminiatureconstructionco4556
@theminiatureconstructionco4556 2 күн бұрын
Hehehe it's actually quite nippy when it's running. 😅
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 2 күн бұрын
The reason why these tyxin boats can go so fast it’s due to a good pump design and has a scoop in the intake grate
@carloshnunez
@carloshnunez 3 күн бұрын
Great is really fast with the 3S my favor part is when it when under water cool 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@theminiatureconstructionco4556
@theminiatureconstructionco4556 2 күн бұрын
That was my favourite bit to! 😅
@RC3DPrintAdventure
@RC3DPrintAdventure 4 күн бұрын
Great entertainment, thank you..! 👍
@theminiatureconstructionco4556
@theminiatureconstructionco4556 2 күн бұрын
It's a service 😅👍
@jamesdalby-r3v
@jamesdalby-r3v 4 күн бұрын
Love this 👌 I have been contemplating trying a 3s in mine, I have 2 of these and they are pretty good as they are but thanks! you saved me frying mine!! 😂 but like you said it’s the perfect excuse to upgrade it to a 3s brushless system 💪
@oliverweston7136
@oliverweston7136 2 күн бұрын
It was only the motor that was damaged. The electronics are fine. I think it was a fluke it burnt out. 👍
@topshelflifestyle01
@topshelflifestyle01 4 күн бұрын
Hardly insane
@theminiatureconstructionco4556
@theminiatureconstructionco4556 4 күн бұрын
Mad then?
@topshelflifestyle01
@topshelflifestyle01 2 күн бұрын
@@theminiatureconstructionco4556 dumb then ?
@UP-NORTH_RC
@UP-NORTH_RC 7 күн бұрын
Should try it on a crawler course or some rocks to see what it is capable of. Curious to see.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 7 күн бұрын
@UP-NORTH_RC I personally think it would be terrible. Its just not a crawler. 👍
@UP-NORTH_RC
@UP-NORTH_RC 6 күн бұрын
@@theminiatureconstructionco4556 ya definitely agree but would be cool to see what else it could handle 🤙
@theminiatureconstructionco4556
@theminiatureconstructionco4556 5 күн бұрын
@UP-NORTH_RC I'm going to say very little. It's purely a basher / dirt tracker. Still good fun, though, with the right terrain. 👍
@UP-NORTH_RC
@UP-NORTH_RC 5 күн бұрын
@@theminiatureconstructionco4556 yea I definitely agree with yah! Might be getting one soon. I'm a crawler guy but there's always room for new things in life 😃
@theminiatureconstructionco4556
@theminiatureconstructionco4556 5 күн бұрын
@@UP-NORTH_RC definitely!
@dangrady2938
@dangrady2938 7 күн бұрын
Probably down to the esc , could change it up ?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 7 күн бұрын
@@dangrady2938 might give it a bit more oomph?
@McRc73
@McRc73 9 күн бұрын
Je pense que le prix c'est pas mal
@theminiatureconstructionco4556
@theminiatureconstructionco4556 4 күн бұрын
Très bien en ce moment, si vous êtes prête à regarder !
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 10 күн бұрын
I just wish it had part support
@theminiatureconstructionco4556
@theminiatureconstructionco4556 4 күн бұрын
In some respects you don't need it. Because most boat parts are available as off the shelf bits.
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 11 сағат бұрын
I just found a website that sells the parts for it it’s called fair rc
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 11 сағат бұрын
Sorry wrong one it’s rc station
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 10 күн бұрын
It might be possible if you put in a bi directional esc you could gain self righting
@theminiatureconstructionco4556
@theminiatureconstructionco4556 10 күн бұрын
That's a possibility. Although it never came close to looking like capsizing. I'm not going to say that's impossible, though. It was a very stable boat. 👍
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 10 күн бұрын
For me it’s just the re assurance that would be worth the price
@grrfy
@grrfy 10 күн бұрын
@@IsaacSchultz-lz8jc I really ,really tried to get it to capsize, one pontoon out of the water a few times, but was surprisingly stablemit's more a trimaran or pontooned monohull,so can carve corners a lot more than with a true catamaran I think, is an interesting hybrid hull shape tbh
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 10 күн бұрын
I’m deciding getting this or building that m jet sprint by m jet
@grrfy
@grrfy 10 күн бұрын
@@IsaacSchultz-lz8jc Nice! could get this whilst printing and building up your MJet 😁
@carloshnunez
@carloshnunez 10 күн бұрын
Very nice, just needs clean water 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@grrfy
@grrfy 10 күн бұрын
that's as clean as you get here .I think it picked it up when drove into the reeds.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 10 күн бұрын
Don't get that in England 😂
@grrfy
@grrfy 10 күн бұрын
@@theminiatureconstructionco4556 😁
@grrfy
@grrfy 10 күн бұрын
I still wish it had the BoatSheep stickers haha! dunna dunna dunna dunna Boatsheep!
@theminiatureconstructionco4556
@theminiatureconstructionco4556 10 күн бұрын
😅
@scaleworksRC
@scaleworksRC 10 күн бұрын
These boats look like good fun for the money and I like the catamaran race boat styling! Interesting how that cooling works, I noticed the Jet Jam doesn't have any
@grrfy
@grrfy 10 күн бұрын
It is megafun! If you can get one for an acceptable to you price, it is worth having for sure ,lots of room inside as well for adjustments if needed.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 10 күн бұрын
Yeah, it was definitely a blast for the money. Unfortunately, this time of year, you get a bit of detritus in the water.
@scaleworksRC
@scaleworksRC 11 күн бұрын
Hilarious! 😅 I only laugh because I know your pain all too well😁👍
@theminiatureconstructionco4556
@theminiatureconstructionco4556 10 күн бұрын
Hehehehe your heart just sinks when they get stuck out there. That's why i always take two, sometimes three spare!!
@scaleworksRC
@scaleworksRC 10 күн бұрын
@@theminiatureconstructionco4556 I'm pretty confident with my DIY rig, but the Jet Jam is my #2 🙂
@think2cre81
@think2cre81 13 күн бұрын
What brand of assembly grease did he use to seal the hatch ? What color is it . I couldn't see any color in the video . Was it clear ?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 13 күн бұрын
Go down to Grrfy,s comment and ask him direct. Because it was his boat. I honestly couldn't tell you. But he will.
@think2cre81
@think2cre81 13 күн бұрын
@theminiatureconstructionco4556 thank you 😊
@alibz7283
@alibz7283 13 күн бұрын
What is the esc amp?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 13 күн бұрын
I think they were stated as being 20A. But id take that with a pinch of salt.
@Icevr77
@Icevr77 13 күн бұрын
I have a question which one would be more expensive a jet boat, RC or a motor RC
@theminiatureconstructionco4556
@theminiatureconstructionco4556 13 күн бұрын
Both can be had for very little money. I don't think one for of propulsion is cheaper than the other.
@Icevr77
@Icevr77 13 күн бұрын
@@theminiatureconstructionco4556 ok thanks
@johntuffy5721
@johntuffy5721 16 күн бұрын
garbage
@theminiatureconstructionco4556
@theminiatureconstructionco4556 15 күн бұрын
yep.
@fariszafran
@fariszafran 18 күн бұрын
Can i put 3s on it???
@theminiatureconstructionco4556
@theminiatureconstructionco4556 17 күн бұрын
I personally wouldn't recommend it. Sometime they are ok with it. Sometimes the esc gives up.
@kolasaRC
@kolasaRC 18 күн бұрын
this video made me sub. good job and cheers❤
@theminiatureconstructionco4556
@theminiatureconstructionco4556 15 күн бұрын
Thank you very much and welcome aboard!!
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 18 күн бұрын
There is a jet boat you should look at it’s the Bancroft jet power sprint boat, it’s a 25inch brushless jet boat for a decent price
@theminiatureconstructionco4556
@theminiatureconstructionco4556 15 күн бұрын
Thank you for the tip. I'll take a look. :)
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 15 күн бұрын
There are very few videos online about it it would be cool if someone would go in depth about the boat.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 13 күн бұрын
@@IsaacSchultz-lz8jc I would love to but its a touch spendy.
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 13 күн бұрын
Then try the tyxin 768 a 3s brushless boat more on the budget side.
@AvenMM2
@AvenMM2 20 күн бұрын
How do you turn on this boat because I bought it and I don’t know how to turn it on
@theminiatureconstructionco4556
@theminiatureconstructionco4556 18 күн бұрын
I think you just plug the battery in. I don't think it has an on/off switch. 🤔
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 21 күн бұрын
I think it is jut a tiny brushless system is for advertising
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello. Your possibly right. Like Grrfy mentioned in the video, the 15A esc probably isn't up to much!
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 20 күн бұрын
Maybe you should upgrade the Tyxin to brushless and then compare it and try to keep it in the same price range as the packer boat.
@grrfy
@grrfy 20 күн бұрын
@@IsaacSchultz-lz8jc great minds think alike! stay tuned for another thrilling episode coming soon lol
@IsaacSchultz-lz8jc
@IsaacSchultz-lz8jc 19 күн бұрын
I will
@theminiatureconstructionco4556
@theminiatureconstructionco4556 18 күн бұрын
@@IsaacSchultz-lz8jc that's a good idea 💡
@rcplaytime
@rcplaytime 21 күн бұрын
wow that's quick 👌👍love it 👍👍😀
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
The problem is the brushed version is just as fast. So its just not worth it!
@scaleworksRC
@scaleworksRC 21 күн бұрын
Go Packers?!🤔😆Good review with some down to earth chaps 👍I learned a lot about these little boats since finding your channel
@grrfy
@grrfy 21 күн бұрын
cheers fellow! you are getting that wlt dialed in now ,
@scaleworksRC
@scaleworksRC 21 күн бұрын
@@grrfy Thanks! Pretty happy with it now.. I'm just not sure if I want to invest more into it and upgrade the motor 👍
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello. Yes I've been testing loads of boats recently! Sort of got a bit obsessed :). I had a load of control issues with my 915 so it was returned. Although I wouldn't mind trying another one. I think you should when the time comes upgrade the motor, as you can make them silly fast!!!!
@scaleworksRC
@scaleworksRC 20 күн бұрын
@@theminiatureconstructionco4556 Yep, that 915 I almost passed on completely after seeing the issues you had, but I figured I'd take a chance. And if it was bad, I'd just return it.. but it was on sale for 40% off, so I gave it a go. The one I got was the revised version '915-A' ..so it had some updated bits, but slower than the original. 👍
@WFoster
@WFoster 21 күн бұрын
I’m getting the brushed one is brushless better or not for the price
@grrfy
@grrfy 21 күн бұрын
Brushed is the way when we compared them we were very surprised, the brushed also has self righting and a small amount of reverse thrust unlike the brushless.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello! Get the brushed!!!! Its cheaper, just as quick, has a nicer transmitter, handles as well if not better, has a bit of reverse and has self righting like my colleague mentioned. In this case there is no advantage too buying the brushless, unless you like wasting money!!!!!
@WFoster
@WFoster 20 күн бұрын
@@theminiatureconstructionco4556 thank you for the honest review I will get the brushed
@theminiatureconstructionco4556
@theminiatureconstructionco4556 18 күн бұрын
@@WFoster I don't think you will be disappointed. 👍
@carloshnunez
@carloshnunez 21 күн бұрын
Very good review looks like the brushed is the way to go 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@grrfy
@grrfy 21 күн бұрын
A very surprising result, brushed is alo self righting and has a bit of reverse.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Yep we were very surprised when we tested it that it really wasn't any better! Save your money and buy the brushed!!
@adamlavoie2435
@adamlavoie2435 23 күн бұрын
I love mine!
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
They are a cracking bit of kit for the money. They seem to be getting cheaper too.
@veerx7039
@veerx7039 24 күн бұрын
I'm from India very nice video ❤❤❤❤
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello India!!! Glad you enjoyed!!
@charis.s
@charis.s 24 күн бұрын
Thats a nice little boat for the price! I'm interested in buying one, and i'm wondering if i can buy spare batteries. I see it has a 4 pin connector which is rare. Would i be able to modify 3 pin batteries?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello! Sorry for the delay in replying. I think you can get spare battery's yes. I'm sure I've seen them on AliExpress? I personally in the near future, am going to fit a different connector. And find some small li-po's to use.
@philpowell1162
@philpowell1162 26 күн бұрын
It's a nice looking car. But I would not buy it !
@theminiatureconstructionco4556
@theminiatureconstructionco4556 25 күн бұрын
Horses for courses. 👍
@RedPanda_00806
@RedPanda_00806 29 күн бұрын
Are shocks absorbers the same length (both 4 ??)
@theminiatureconstructionco4556
@theminiatureconstructionco4556 29 күн бұрын
I don't think they were. But they were not meant for this rc. You can buy specific ones which are. 👍
@richarddorsch7275
@richarddorsch7275 Ай бұрын
It looks like those floats are to large and heavy so the tug suffers in maneuverability. I think using small plastic fishing bobbers would be better.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 29 күн бұрын
I think your right. 👍
@BangForYourBuckRc
@BangForYourBuckRc Ай бұрын
Nice simple little boat Oliver! Love these things for their compact size and more than fair price for the $$
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
Yeah, you can just sling them in a backpack, and away you go!
@carloshnunez
@carloshnunez Ай бұрын
Looks very good for the price 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
A right bargain!
@paulmoore4344
@paulmoore4344 Ай бұрын
The link is for the previous boat buddy, the 813. Can't find the 808, only the 809 for £80. is it brand new?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
It was off a Seller on eBay. I will try and fish out a link. 👍
@grrfy
@grrfy Ай бұрын
It looks pretty nippy!
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
Not to shabby
@scaleworksRC
@scaleworksRC Ай бұрын
The one thing I really like about the boats is the water cooling systems. This little one is pretty neat for the money. I like the coloring, and you could keep it in your car for a random pond session 😁
@oliverweston7136
@oliverweston7136 Ай бұрын
That's one of my favourite things is to watch the little arc of water. Spurt out of the exit hole for the cooling 😂. Definitely good for random ponds. 😅
@AlphamenschRC
@AlphamenschRC Ай бұрын
I like the boat and for that price i would buy it too😎 Awesome review, thank you🤗
@oliverweston7136
@oliverweston7136 Ай бұрын
Yeah it was a bloody bargain! Great little boat too. 😊
@luvadealme
@luvadealme Ай бұрын
Glad you reviewed this as Santa banggood got myself and my Son a red and green one of these at Xmas and we have not had the chance to try them yet.... on a side note any experience of the mini scale rc cars 1/76 by turbo racing or the LDARC v64 vans?
@theminiatureconstructionco4556
@theminiatureconstructionco4556 21 күн бұрын
Hello! Apologies for the delay in replying, I've just seen this. Unfortunately I've not had any experience of those small scale RC's, but you never know! What a shame you have not tried your boats yet, they are good fun!!
@luvadealme
@luvadealme 21 күн бұрын
@theminiatureconstructionco4556 no worries. Defo ought to get out amd try the boats though. Prob wait for school holidays.
@005connect9
@005connect9 Ай бұрын
I’ll be building out one of these into another 4wd version like I did with my D12. Really like this body and I have a fix for the bed flex.
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
Yeah, it's something a little different. 👍
@andrewwright.
@andrewwright. Ай бұрын
nearly brought something like this but then I realised it's not very good. will break in a few days and the fun just stops. then should we talk about sensitivity of the controls? some will speak how bad it is with hyper go...most just replace it's that bad
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
It's good for the money.
@Midlife-Crisis-RC
@Midlife-Crisis-RC Ай бұрын
Babanababababababab
@theminiatureconstructionco4556
@theminiatureconstructionco4556 Ай бұрын
Thought I'd try jumping on the old bandwagon. Every short I get suggested contains this song. They must be making a fortune!