Love, love LOVE the texturing!! AWESOME KNIFE!!! Thank you!!! ;-}. MM

Beautiful, looking forward to this one. Congrats on the 35 years ... Cheers

Congrats on the 35 Years!! Hoping to get my hands on a Project X in Red.... Love this design!

I know this is an old video but i just ordered one yesterday, please keep the textured lock side it looks awesome, igot my first Hinderer in November and now I'm on my 4th RHK and I'm hooked, thanks for making awesome knives Rick 👍⚔️

Love the texturing and higher blade grind. Seems like a great “just right” size between both my XM’s. Have always liked the idea of the FullTrack and the onboard tool. This design is a lot more up my alley. Lucky enough to be on the site at the right time and persistent enough to grab one :)

Hope I can get a hold of one. Your designs are by far my favorite.

Whoa! Yes please!!! I love the example with the textured lock side!

Really digging this design. Look forward to seeing more of these hit the market

Looks like a great knife. Like every other Hinderer Knife I look forward to it never being available and out of stock at every major web retailer.

Hah thanks for including the tomato demo at the end. Looks like a great knife!

Super excited to get my hands on one!!

🎉 well done well done Mr henderir. Stay warm 🙏🏻 I'm over here in Crawford county 🤘🏻

I need one of these! Outstanding Rick and Hinderer crew!

Very cool. I will add one to my stash!

Nice dinner plate on the wrist 😋. Looking forward to a new model 👌

Awesome! Looks GREAT!

Well Done Knife !

Very cool design, practical and ergonomic, I prefer the xm18 for beauty but the project X seems a very close second place. Both really nice 👍

I just bought my first XM24 Bowie from you which is the most incredible knife I now own. The tuning out of the box was 100% perfect. Congratulations on 35 years.

Ordered one in orange..blue . Can’t wait

WOW WOW IM EXCITED

Like the blade shape and grind. Like the pivots bolts at both ends - adds a nice balance. And heck it even slices tomatoes!!! Hope they’re not going to be un-obtainium!

I would love to see the texture on lockside to stay and would love to see the same texture to be on front side in titanium

Master of the craft

I'm in :) Thanks Rick

I really hope you make enough so I can get one!

Said it would be available Saturday, it’s now Saturday @ 6:30pm est, SOLD OUT! I hate teaser batches.

OOOO! Exiting!

Cool stuff!

Great knives

Thank you Mr. Rick Hinderer! I've been waiting and waiting, I keep missing the drops :). I hope you have enough to go around!! Love all your knives!! Thank you, Victornishimoto2020

Got Dang !! Well I do need a new tomato cutter

yes please

I really hope they make this in a lefty!

🔥🔥🔥🔥🔥

I dig it actually

Sweet

Please, please send some up to Canada!!

Had no idea you are from Wayne Co., greetings from Darke!

Tip up 👍👏👏

This guy looks pretty awesome, wanted another XM but this guy might be better like the 3.75" blade size

I want more Wharncliffe's!

Textured lockside xm18s in the future? Or other models?

I picked up a Lefty XM-18, please release this in a left-handed version! 🙏

It's been one month since the video, any hints as to when more are coming out?

The website was a disaster during the release-but it works great now after the X was sold out.

Getting my hands on a hinderer knife has been on my list for 10+ years maybe you could say would be a grail

I like the texturing hope to see it continued! Wouldn’t mind it on other models either

👍

I hope this new knife doesn't take to much time away from making the Xm-18. As an international buyer i have to buy my Hinderers new,since the secondary market is not open to me....shipping outside the Us is apparently to hard.

Looks good! Almost like a cross between an Umnumzaan and an Xm-18 if they had a kid. The only thing I don't like is the backside hardware what looks like bolts. These are great for engines and various other non-knife real life applications like bridge supports but suck in the aesthetics department IMO. This is why never bought some of the ZT knives and collaborations because of the bold hardware. To me, brings down the value of the knife especially when so many other cool ways to do it and dress up hardware. The jimping looks better than the xm-18 and like the fact of only tip up carry and no thumb stud clean design. Only thing is though how can it be as strong as an Xm-18 without those double-stud lock pin style lockup? Interested to know how new owners like them.

Please make some lefty batches as well!

Looks a lot like some of the old school ZT Hinderers

💯🔥 🤤

🤝🏾🇺🇸💪🏾

Incredible job Rick and crew. Can’t wait to get my hands on one!

Great looking. How on earth can I get one. I have collection including Bob Loveless and Todd Begg and Sawby, but cannot get my hands on a Hinderer?

Change the pointy flipper tab and you’ve got a real winner there.

How do we get on the waiting list Rick?

Is there a product page up for these yet?

Where are the external stop pins? 🤔🤔🤔

Yo Rick what's up with that cease and desist to Transparent Knives???

This is awesome, cause I do NOT do finger choils on the blade. Will there ever be an XM-24 Slicer Grind WITHOUT a finger choil? Thanx for the video my Bladed Brother 👍 ⚔️ ✝️ 🇺🇲

Any chance of getting this with textured titanium on both sides? If there is then take my money now.

This looks amazing. Can’t wait!

Rick - just wondering why you don't use hollow ground blades on any of your knives.

Looks like a Kershaw Cryo.

Cool knife but we still can't find any Hinderers anywhere! It's like they're non existence.

It's a wonder how you found the time, you know, with the lawsuit and all.

Hey Rick, I was actually out in this last winter storm doing ice and snow removal. So i missed the drop because I was working. I did have my xm-18 in my pocket as usual. But i want a project x to carry at work too. When will the next restock be?

So excited, I need that in my life!!

I have to sharpen my Hinderer XM18. The problem is, its new

Can the project X tool act as a bottle opener too?

I just bought your Wharncliffe 3.5" fixed blade. I've had much sharper letter openers, not joking. I do not own a knife sharpening system. Do you have any recommendations as to where to have the edge professionally sharpened?

Where can I buy it at

Are there gonna be ti scales for these?

Nice knife Rick like always. First hinderer i actually don’t want though. The handle screws are an eye soar they are too big and the textured back doesn’t flow with the knife.

Looks like a wonderful design! Hope to get one someday 😍

Absolutely perfect!!!!!!!!!!! If I can get my hands on one it will be my first RH knife. Can’t wait!

Weight of the knife?

Love it … but I love my Fulltrack more

Beautiful knife I would buy one but it’s just too expensive for me

Have a trash website, you speak your mind then Rick blocks you. Way to give us our freedom that you fought for.

I want one pls !!!!

Well that was a sh@# show of a drop. Consistent and constant site crashes, knives showing in stock when they weren't causing lost time in efforting a different variant. Adding to cart to be told zero were available...then delays in removing from cart...not sure how many dropped but kudos to those who somehow were able to land 1. Looks like a cool knife.

Great looking knife, want to get my hands on it!

Really cool to see a knife designer introduce his own knife. Great video. When you see what's obviously a sturdy work horse you wonder how slicy it is.. Well.. Tomato. :) Congrats.

I absolutely love and constantly use my Gen1 halftrack (as seen in profile pic) My first +1 million view video on tiktok was with it. Keep making awesome knive Sir.

Going to try to get one for sure. Looks like one that will sell out fairly quickly though!

Oh yeah need this one. Love the lock side texture.

TIP DOWN

This knife is just my type. Can't wait to attempt to buy one. My guess is they sell out in seconds

Sold out :(

Wish it had a thumb stud not a big flipper

Man those sold out quick

I thought this was going to be an automatic? You guys working on an auto or did I just imagine that lol.

What the HRC? 🤣

Finally, a knife maker releases something actually new this year and not some recycled BS. Thanks Rick. Also I've been rocking an Emmett for a month now and it's amazing.

Why does it have to be a flipper?

Rick please ! This is a mistake im sorry bring back fulltrack