Building a HIGH SPEED Rocket Plane
Рет қаралды 723,582
14 күн бұрынI've been upgrading this RC SR-71 Blackbird to fly as fast as possible. Check out PCBWay at pcbway.com/g/9cfi7a for our one-stop solution for PCB prototype services and more.
👉🏼 Patreon sign up / jameswhomsley
👉🏼 More info about projects projectair.co.uk/
👉🏼 Follow me on Instagram / jameswhomsley
Thanks to E-Flite for sending me this plane www.horizonhobby.com/product/...
Thank you also to TSP for providing the rocket motors / piotrtenderarocketmotors
Thanks to these artists for providing some of the music in the video:
Andrew Applepie for the music used in this video - / andrewapplepie
DISCLAIMER: This video is purely for entertainment value. Personal use of video content is at your own risk. Recreations of experiments, activities and projects are the sole legal responsibility of the person(s) involved in replicating them. I can not be liable for any information or misinformation, wrongful use, damage to personal property, death or any circumstances that result from replication of any projects seen. Be safe!
@martin2250 13 күн бұрын
5:24 small correction: you need 8 times the power for twice the speed. Force increases with speed², but power is force × speed
@christopherleveck6835 13 күн бұрын
And restrictive exhaust nozzles would be a great idea too...
@brucebaxter6923 13 күн бұрын
@@christopherleveck68355” drone motors actually, greater disk area and same efflux
@SubToRussertlogPlease 13 күн бұрын
plz be my teacher
@surfcello 13 күн бұрын
Was just about to comment the same.
@sidecarbod1441 13 күн бұрын
I though it went up by the square, i.e. double the speed requires 4 times that power. please enlighten me!
@ryguy81538 12 күн бұрын
Someone may have already commented on this and it might be obvious to you, but a big reason the plane is so unstable during the motor burn is it's not pushing through the center-of-mass. It's strapped haphazardly to the top of the craft causing it to nose dive down as soon as it's ignited. Placing it centrally in the back or adding another motor underneath is a possible way to correct this. Always love your uploads though. Keep up the good work.
@Erth 12 күн бұрын
Job Well done! 👍 interesting and inspiring video!
@MonroeSwift 12 күн бұрын
I was on my way to comment the same thing! also mounting the rocket motor further back on the plane will help.
@avialexander 12 күн бұрын
Or, you could angle the rocket to point back and up, so that the thrust vector passes through the CG. It will also push the plane down, but if it's already moving through the air all you need to do is increase your angle of attack to get a little more lift. Or you could do what JATO's do, and hang the rocket underneath or to the sides, pointing it back and down but still through the CG.
@baudouindesaintroman6337 11 күн бұрын
I don't do avionics, only pyrotechnics and solid booster engineering, but yes it seemed to me that it would be much more stabilizing to put the booster under the wing level... Also he modified the balance and weight of that plane way to randomly 😂
@avialexander 10 күн бұрын
@@baudouindesaintroman6337 Rockets are one of those things that mess up the whole "if it looks like it will fly, it probably will" heuristic. I think that's what we're seeing here, the complicated dynamics of rocket thrust and mass are hard to optimize around, so most people just slap a rocket on top of the plane since it feels correct. I blame 50's-70's pop sci artwork for this misconception.
@mike1261 13 күн бұрын
Back in 1980, in a time before computer aided design, I build a SR-71 Estes-type rocket from scratch. I referenced photos from a magazine and used balsa wood & paper tubes for most of the materials. It was about the size of yours. Being a fairly heavy rocket, it had two D-size solid propellant motors, one in each engine. I was quite fascinated by the Blackbird at the time, but extremely inexperienced at building rockets. Needless to say, it flew, but not very straight!
@ninkd0311 12 күн бұрын
I bet you used a slide ruler
@mike1261 10 күн бұрын
@@ninkd0311 🤣 If I was only that smart... it might have flown straighter. 🤣
@gkoshinsky 9 күн бұрын
I made mine in about 1990. I even followed the guide to paint it with different black paints, some flat, some gloss, to simulate the different surfaces. It was maybe my 3rd rocket. I never actually flew it. I spent so much time on it that I was afraid to launch it. Years went by, got interested in girls, and it hung in my room for years. My mom probably threw it out at some point after I moved out. It was beautiful though. I spent so much time on it. After spending months staring at it at the hardware store. Wish I would have launched it.
@mike1261 9 күн бұрын
@@gkoshinsky Sounds cool! I don't know what happened to mine either. I know I carried it home after the launch (more than I can say for some of my rockets! LOL)
@Ingo3112 13 күн бұрын
you need to stop mounting the rocket engines to the top of the plane . they need to put in the back like the fans but in the middle . desing the same plane model but with the option to put in the rocket engines in the back like a fighter jet . and put 2 rocket engines in the back not one .
@BragizTheCocaineAttractor 13 күн бұрын
I agree with this cuz if it will be sitting on top, it kinda disturbs the aerodynamics
@Ingo3112 13 күн бұрын
@@BragizTheCocaineAttractor not only that, it pushes the perfect in line thrust point from the normal engines way higher wich causes the plane to pitch down and generate even more drag .
@alek002 13 күн бұрын
Cool
@TheZombieSaints 13 күн бұрын
You can can rocket motors that are essentially just multi stage boosters, you literally cellophane tape them together and when the flames hit the tape, it melts, drops off the dead Booster while igniting the second stage. More boost with less weight. Mounted underneath it with 2 boosters then the final motor with recovery chute.
@Avio_x 13 күн бұрын
That is true, but it is really hard to squish all of the electronic and also balance the cg with such modifications
@kenselleck2414 12 күн бұрын
You succeeded in making the SR71 exceed mach 3.2 in scale. I call that a win! Mach 3.2 is 2400 ish mph and your plane did 2800 scale mph. Bravo!!
@Soldo66666 10 күн бұрын
How do you scale speed and sizes?
@Rydog20 8 күн бұрын
By ratio of size Say if you had a model 1/59 the scale you'd need about 1/59 the power for scale speeds
@Soldo66666 8 күн бұрын
@@Rydog20 oh... That was simpler than I thought.
@charlesyoung8600 13 күн бұрын
It's not a project air build without rocket motors. Brilliant!!!
@leomathguy 2 күн бұрын
Next step - design and strap on a full flow staged combustion rocket engine on it
@TomleyRC 13 күн бұрын
The Insta360 rear facing shots are beautiful! Such a versatile camera. I'm just replacing my original one after a good few years of hard use! Oh..and rocket projects are always a good watch 🤘
@Project-Air 12 күн бұрын
Totally agree! Thanks man
@garrittpwl 12 күн бұрын
Your video quality is taking massive leaps forward. This video was that of nearly an educational video on a mainstream media station. Keep it up!
@craighyattusa 11 күн бұрын
That video was the most (vicarious) fun I’ve had in a long time. Some excellent research and engineering skills on display. Look forward to the next project.
@richardm.newlands2417 12 күн бұрын
Ah James, this is your best one yet, brought a tear to my eye! Brilliant idea brilliantly executed! Just a few minor thoughts: Agree with everyone else who's suggesting a bungee-launch. FYI these incredibly low Aspect ratio deltas are a bitch in roll, because the stubby wings provide damn-all roll damping. And at higher angle of attack, the vortices spiralling off the leading edges tend to bang into each other over the aircraft centreline, causing a roll oscillation. So if you can shoe-horn a rate gyro into the roll channel it'll make life so much easier. I so just love this video!
@3D_printer_guy 9 күн бұрын
Thank you for another great video. I got a tip for line of sight flying, paint the plane with different colors over and under. Makes it easier to see which side of the plane is facing you.
@gafrers 13 күн бұрын
You can never go wrong with an SR-71 Love these flight videos a lot more than the boat ones
@robertstark3326 12 күн бұрын
Great project. That was a spectacular flight. The way you led up to the rocket engine flight was just so impressive and all the work you did to pull it off. You had a well-deserved success. Keep up the great work.
@umranrc 2 күн бұрын
Use the drone to lift the aircraft high in the air. Install a cable release servo onboard the aircraft and with enough altitude, the aircraft may gain enough airspeed during the drop to start flying properly and you may discharge the rocket then...
@nigelhutt9921 7 күн бұрын
I know nothing about RC planes but found this a thoroughly compelling snd informative video.
@adilsongoliveira 13 күн бұрын
As I said in another video, you really need to change your radio to use ExpressLRS. The receivers are very small, even the ones with PWM outputs and the range and reliance are excelent.
@sakfpv8444 13 күн бұрын
I agree, I switched all my fpv drones to ELRS and fell in love. Even my Arrma rc truck has it now
@chrisbrook6656 13 күн бұрын
Yep....ill never look back.
@TheRattleSnake3145 13 күн бұрын
You get over 2 km range with standard orange relievers, why would you need more than that unless you are flying fpv illegally?
@jordanliszewski6549 4 күн бұрын
But then he could fit a gyro
@jordanliszewski6549 4 күн бұрын
@@TheRattleSnake3145 Kind of a silly comment. ELRS wins over older control links like spectrum in basically everything, it's cheaper, receivers are smaller, it's range and link stability is insane and it's open source and always improving further. People have gotten over 100km of range with 2.4 GHz ELRS, basically for a normal usecase you never have to think about range ever again with ELRS. Additionally it comes with lots of additional features, adjustable data rates, model match, the ability to access settings on the flight controller flashing over WiFi. You don't have to switch to a different control link if what you have is working fine for you but for controlling things that fly, especially fpv, having a long range, high performance control link that never failsaves is a very good idea.
@nauhaan1604 5 күн бұрын
I love your videos! I am a Maldivian drone pilot and my drone pro E88 crashed recently. I really love RC vehicles
@fustigate314159 12 күн бұрын
Props to the original manufacturer for making the landing gear accurate!
@vne5195 4 күн бұрын
A standard planform airplane designed for subsonic flight would be more easily controlled, easier to see the orientation and easier to launch. Perhaps you could try a small diameter folding prop with a motor brake to stop rotation of the prop when the rocket is ignited. Having the rocket pointing out of the tail cone should make it easier to keep the center of thrust aligned with the center of drag.
@BarrettCharlebois 13 күн бұрын
I always get so excited when I see you drop a new video, especially if it has rocket motors.
@alwaysflying6540 13 күн бұрын
Just found this channel. I personally really like doing projects like this so for me it was very enjoyable to watch
@Aero-100 11 күн бұрын
Removing the engine cone was a good idea because it's used to compress air, but if you wanted more power you should add a compressor stage (from the turbofan engines) and put a primary fan in the front to suck all of the air in, and by that, where you put the rocket engines you should put in the front a intake because air sticks into a body when moving, then connect it after the primary fan. You could also have heaters inside of the engine so cold weather heats and you get more force. If you did that with only 1 engine vs 4 old ones you'll get even better power.
@NicktheMedic 13 күн бұрын
That is one really cool plane. golden, rocket-powered, SR-71, 200kph, great footage and video so I'd call that a win.
@pioneerAv 13 күн бұрын
James Bond: The Man with the Golden Plane
@The_2_ultimas_uk 2 күн бұрын
You teach me what to do in rc I saw the original rocket plane video when it first came out!
@TheActionBastard 13 күн бұрын
Long range FPV would be amazing with this project. Imagine the feeling of speed...
@_tyrannus 13 күн бұрын
Long range and electric ducted fans are like water and oil.
@shitbox170 13 күн бұрын
Get a Strix Goblin cruises around at 120mph and is fpv
@BPBomber 13 күн бұрын
Your projects always look like such fun.
@Destructor429 13 күн бұрын
You need to build a proper High start. 10 meters of surgical rubber tube and a release. Lots of 3D printed options out there. your hand launches are pretty sketchy! Using a High start lets you keep both hands on the controller. I like your builds! Excited to see the next one!
@ymemag9861 13 күн бұрын
I love how you put your RC SR71 into your RC car and drove it to test!
@jordancoleman2402 11 күн бұрын
What was he supposed to do with it?
@impiggybro 13 күн бұрын
WOW SUCH A GOOD AND CREATIVE VIDEO!! KEEP up the amazing WORK :)
@LJvids-wk6jb 6 күн бұрын
Literally my favorite plane! Thanks project air!
@thefantasyforge5015 13 күн бұрын
This is your coolest plane yet. Good job!
@FarmerDrew 10 күн бұрын
14:30 kudos to you for maintaining a decent flight profile, that's a crazy acceleration for the scale
@zacharywalters8139 12 күн бұрын
Phenomenal channel man! Just stumbled onto it.
@SgtMars 11 күн бұрын
4:00 that’s a gorgeous Mini Cooper!😮❤
@JCtheMusicMan_ 13 күн бұрын
I would love to see you 3D scan the A/C and scale it up! Give yourself enough room to cram in more rockets into the form factor. Love this project!❤
@brianswille 11 күн бұрын
Cool project! Cant wait to the the next... Gigga... sized project you have coming!
@advaitbhore 13 күн бұрын
The best and most entertaining diy plane channel everr!!
@businessraptor127 9 күн бұрын
Top notch with the wind tunnel testing!
@ericwillis777 10 күн бұрын
Great fun, a pleasure to watch, reminds me of my APS Folland Gnat jetex model, which only managed a smoky ballistic trajectory after a very energetic hand launch, - far too heavy, cut up postcard is not a substitute for a bristol board skin !
@001snapshot 11 күн бұрын
Absolutely LOVE the Corsair in the background....
@eliotmauries9712 13 күн бұрын
always a good evening when project air drops a rocket plane video
@Project-Air 13 күн бұрын
Thanks for watching!
@chrisduna6483 11 күн бұрын
Great job ! I’m terrible at rc airplanes but love to watch them my father use to scratch build them really enjoyed watching your video keep up the great work !
@vosechu 10 күн бұрын
I hope that you try your hand at it again later in life! It’s a wonderful way to connect with parents (whether they’re still with us or not)
@chrisduna6483 10 күн бұрын
@@vosechu I agree but no I always enjoyed RC Cars and trucks and were more my speed lol and have quite an collection of them that I really enjoy . 😁
@darreno9874 11 күн бұрын
Back in the 80s there was a rc plane called the bullet it easily reached 100mph according to the manufacturer and having seen it fly it was so much faster than anything else. Great job😁✈️
@game-f-un-limitedgamer8958 13 күн бұрын
1:59 is when the black bird breaks the sound barrier :)
@Fortnite-ClipsYT 11 күн бұрын
No
@comedianfiftysix3775 13 күн бұрын
That was Absolutely amazing; I really want to pick up the E-Flite Blackbird in the future; soon as I quit bending the landing gear on my Cirrus 1.5🤣
@stewpadasso297 10 күн бұрын
Dude cool mini! I built and flew a model SR71 Estes rocket kit when I was a kid. I still have it and it hangs with my other model planes in my home office. Cool video sir.
@ernstgoldfinger1178 9 күн бұрын
You have just proved the principle of fly by wire. You're a great tuber and experimental engineer... So my question is why did you not 3d print a custom Nacelle to enclose the gyro? The gyro was the one key component to keep the flght im check. So I give you a B+ mark for your achievement. However with your workshop and experience the gyro should have been engineered back in. I am critical as I worked on F-4 Phantom Jets as an electrical technician and am so pleased that you are holding a fantasy job. Keep it up. The RAF should recruit you at Boscombe Down with IA. Minimum rank of Flt Lt with maximum seniority. Imagine their workshop and 3d printers. Recruit your Lady too... What a Dream Team! Respect.
@RaynerGS 13 күн бұрын
One suggestion is to remove the fan and fan battery. In place of the engines, two rockets, one on each side. Use the drone or a balloon to raise it, and then a remote hook system makes it detach and fall, then turn on the rockets. Perhaps, lighter, it could reach 200 km/h. Salute from Brazil.
@MyCreatorSpace 11 күн бұрын
This is awesome. wathced the whole thing. feel like it would've been turned into a 5 pt build. first rocket powered test could've been a whole episode on its own.
@ADjasonTplayz 13 күн бұрын
The plane🔥 The neighbors reaction🗿
@RvB_Fan_since_8 11 күн бұрын
Thanks for including the freedom units for us :D
@daddy765 13 күн бұрын
I dont know how you do it but you make videos with such high quality but in a timely manner!
@virajmankar4882 13 күн бұрын
man you mske such a nice videos i always enjoy your vids..keep making such type of projects
@zaidayman441 13 күн бұрын
Great video, very fun to watch. Few tips though, don't do high speed runs without a gyro because not only you were losing speed going right, but also losing speed going up and down. For that though, you will need better avionics and custom code depending on the airplane's characteristics. i think doing that first is better than hastily slapping on a rocket motor. Also, there is no problem going a little bigger and doing the aircraft shape yourself.
@gflorey1975 13 күн бұрын
Love your videos - I know it's not about this but you should use a flight controler and ELRS - the recievers are tiny and have huge range - also give you upto 16 channels!
@rcman4.2flyboy 13 күн бұрын
I got the same blackbird from eflite thats a awesome mod you did there dude 👏 makes me wanna mod mine
@CapTheNPC2 3 күн бұрын
that shot at 14:06 is so wicked cool
@snezzles278 13 күн бұрын
thing looked awesome in the air 👍
@OphobbyYT 11 күн бұрын
That was awesome. I can't wait to see your next rocket plane video!
@nickcoppack4685 13 күн бұрын
Well done James yet another video I cannot stop watching until the end.
@rogerburner3577 12 күн бұрын
Love all your videos and especially your Mini, I have always wanted one of those cars. I live in the US and they are pricey here.
@PKS5Official 13 күн бұрын
Love ur vids, I’m currently getting into building rc planes
@PortedBricksYT1200 13 күн бұрын
THANK YOU FOR UPLOADING!!!
@retrorampage484 11 күн бұрын
Chaps messing about with things is how the world moves forward. Keep up the good work.
@Hayden_Wheels 13 күн бұрын
I would recommend going towards FPV so you can continue with the 8 second F sized motors
@aidanperkins3456 11 күн бұрын
That was sick keep up the good work my guy ❤❤❤
@robsbeta21 13 күн бұрын
Need to see a build video for your mini!
@mikelschuyler748 3 күн бұрын
Ok so that was INSANE CANT belive you did that coolest EVERRRRRRRRRR!!!!!!!!!!!!!!!!!!
@travisolander4749 4 күн бұрын
That Mini is beautiful.
@DavidRJones82 13 күн бұрын
Bloody brilliant!
@sral2482 13 күн бұрын
Really nice video. I just thought it would be really helpful if you add for example a DJI O3 or some Walksnail system to your planes. You would have HD transmission and onboard 4K recording. On top of that you can use the gyro data from the O3 to stabilize the Video. And with up to 10 km of range you could easily test long burn rocket motors without having to turn around. Overall the handling would be much easier.
@ianjones7266 11 күн бұрын
Just amazing! Another airplane experiment I don't have to devise!
@nakul3424 13 күн бұрын
Hey man! Try using a very stable platform for your rocket plane.. I think you are selecting Jets with very tiny wings span and the smaller they are the twichier they are. Try the multiplex Funjet ultra 2, this is small for high speed but highly stable! It has a cult follwing in rc community for cheap speed. People have flown this over 200mph with 6s electric motors. It flies straight like an arrow and easy to manoeuvre. It needs very tiny single quad motor on even a 4s to go very fast, go far away and choose a very straight full throttle pass, once your plane is locked in and wings are steady fire up the rocket, i promise you wont regret!
@antitheist9976 13 күн бұрын
Outstanding, cannot wait for the next one ❤🙂
@pimhan 9 күн бұрын
Love the editing of this video
@CodeLeeCarter 13 күн бұрын
Gold paint actually makes your RC planes go faster, it acts just like RGB on PC which helps you get an extra few frames per second.
@barbecuebenny 13 күн бұрын
Love the vids I wish I could actually fly a rc jet/plane
@intotheuniverse9170 13 күн бұрын
I appreciate your efforts 😊 For making these videos
@christurner1909 10 күн бұрын
You just randomly popped up in my feed, but I know where your flying field is 😂. I fly the other side of the hill, not for a few years though, even got a rocket plane of my own!
@100luk 13 күн бұрын
your vids never cease to amaze me.
@raphi142 13 күн бұрын
I really love your projects❤. Very cool video.
@newtommy876 12 күн бұрын
you should paint the nose of the plane a very contrasting color to help with seeing the planes orientation even more
@1980VINZ 12 күн бұрын
That was VERY COOL !!!!! Big salut 🫡 from France 🇫🇷
@thewatersavior 13 күн бұрын
Check out the Seahawk foam.. No need to hand launch and you can turbo charge the rocket if you swap to metal blades 🙂
@inconsisstence 12 күн бұрын
You should look into racing drone cameras, a first veiw from the rocket itself would be super helpful
@dfgaJK 13 күн бұрын
plz get an ExpressLRS controller so you don't lose signal at long range again
@jas-FPV 13 күн бұрын
Where did he loose signal ?
@FarmerFpv 12 күн бұрын
@@jas-FPV His Turbine video. What he needs to do is just add a proper receiver and a satellite or since he is running Spektrum he can just mount TBS Crossfire lite as it is plug and play with his Spektrum radio. That is what I use with my Spektrum radio and I can fly miles with my FPV planes.
@dfgaJK 12 күн бұрын
@@jas-FPV in the "Foam RC jet" video
@dfgaJK 12 күн бұрын
@@FarmerFpv or an elrs module bay transmitter....
@jas-FPV 12 күн бұрын
@@FarmerFpv I haven’t heard that. And he ises a TD Tandem receiver that uses 2.4 and 900 in parallel. So as long as he didn’t make errors installing it, this thing has the same range as crossfire or Elrs.
@userTJ39780 9 күн бұрын
Cheers Emma! nice work.
@torrentsofrc 13 күн бұрын
So cool!!! You are my inspiration and hero!
@Igbf 9 күн бұрын
My experience with planes this size (or smaller, like the eflite mig15 28mm) is that they are borderline uncontrollable with no gyro. Aerodynamics just don't translate very well to this scale, so constant corrections on pretty much all control surfaces are a must. I would say that with more control over the plane the 8 seconds burn time motors could have been a success too, but I understand the decision. Hoping to see more videos on this topic! Oh, and there are some nice frsky receivers with gyro if you want that, but I would try to stay stock even if flying far outside the intended speed. Unless you are willing to spend a lot of time tunning gains and sensivity.
@aaronskartveit9376 11 күн бұрын
First video of yours I have seen it is cool and had to subscribe when I saw your mini. That is my dream car
@Filotti99 12 күн бұрын
Cool video, you should do it with the frame of the Bell X-1 plane, which was rocket powered!
@BassMatt1972 12 күн бұрын
5:30 Sound works in a similar way. If you have one "Marshall Amp" on stage, you need 4 "Marshall Amps", to be TWICE as loud.
@stampedetrail2003 12 күн бұрын
Ace pilot, holy crap, man!
@michellegomez5118 3 күн бұрын
bro should start his own bizz where he builds his own OP planes , cars etc
@juliwankenobi759 9 күн бұрын
in my opinion, a pov camera would solve your running out of space problem. you could fly further and with more presition. i think its worth a shot with the only down side of weight.
@Planetery_Dragon 13 күн бұрын
Who loves ProjectAir videos😊
@MsTatakai 13 күн бұрын
videos*
@daandolfijn2749 13 күн бұрын
Who doesn't
@PleaseSubscribeSoICanGet100K 13 күн бұрын
What was it befoore@@MsTatakai
@hughjanus5518 13 күн бұрын
That's why we watch
@partiallycertifiedpilot6557 13 күн бұрын
✋ 😁
@BladeScraper 13 күн бұрын
Hey James - You can get a TD SR10 receiver if you want a gyro. It's the same size/shape as the one you're now using (TD R10), but with a gyro built-in. Cheers
@TheIronHeadRat 13 күн бұрын
Great job 👍, how about a catapult launcher build 🚀
@cfeauto5938 13 күн бұрын
The plane didnt seem that unstable when you were flying it, at least from the camera if anything the lack of input from a gyro probably helped quite a bit. If you were to get a good FPV setup (one that can record relatively well) it would take up about as much space as that Insta360 setup and allow you to keep the aircraft as straight as possible for the entire length of the burn rather than needing to do orbits. What i would LOVE to see is this thing kinda turned into an X-15. Rocket motors in each of the engine pods, then you need no fans, no major cuts, lighter battery and a completely lighter airframe. Perhaps...launched from another plane? riding piggyback like the shuttle? I doubt with the shape that dropping it from a drone would do anything but lawn dart it. Definitely some room for improvement and the SR-71 platform would be quite Fun to see flying at Mach speeds!
TheBackyardScientist
Рет қаралды 2,7 МЛН
Кик Обзор
Рет қаралды 274 М.