Penetrating Oil Showdown Episode 2. Will Seafoam Deep Creep prevail?

Рет қаралды 19,020,884

6 жыл бұрын

This test demonstrates that not all penetrating oils are equal. In fact, the see-through plastic/rusty bolt test shows which ones actually penetrate and which ones don't. Which penetrating fluid is best? In this showdown, Brake Fluid, Seafoam Deep Creep, Fluid Film, BG In-Force, WD-40 Rust Specialist, CRC Knock'er Loose. Consider selecting the bell in the upper right hand corner to get notified of future videos. Deep Creep won the competition with CRC Knock-er Loose coming in a close 2nd.
Products Tested In This Video (in no particular order):
Seafoam Deep Creep: amzn.to/34nEApm
BG In Force: store.ngpracing.com/bg-produc...
Fluid Film: amzn.to/32kAvQl
CRC Knock'er Loose: amzn.to/2YrGLo1
WD-40 Rust Specialist: amzn.to/34jOSXE
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC

Пікірлер: 32 000

@stingray4540 3 жыл бұрын

Hell one hour isn’t realistic. I give them about 30 seconds before I start cranking on them.

@CaucAzN1024 3 жыл бұрын

I give it maybe 4-5 minutes.. sometimes. Lol.

@therealdojj 3 жыл бұрын

It's about being prepared If I knownive got a job to do I spray the stuff in sometimes days in advance just to make sure 👍

@slevinkrauss6873 3 жыл бұрын

@@therealdojj depends on situation but I totally agree. I'll blast everything under a vehicle before I tear down for resto the night before. But, if they are in a place where I can I purposely just snap them or cut anyways. But I agree, prep and thought are key when able. But I also agree with the other guys in time is everything. Most the time these oils are mainly for the exposed threads and having lube with the heat of friction from removal. I find this video entertaining but pointless as well. Besides everyone in the old world knows that brake fluid and apple cider vinegar are the ultimate for anything you have time to free up.

@therealdojj 3 жыл бұрын

@@slevinkrauss6873 I can't agree with it being pointless, it's very informative and simply laid out The beauty of Project Farm is the simplicity of the testing that many other testers over complicate by giving too much technical information

@slevinkrauss6873 3 жыл бұрын

@@therealdojj I didn't mean for it to sound rude and I misled. It was a entertaining video and as curious as most were... With experience we all kinda know the answer. But I'm the guy that spins the display gear system with Lucas in it at the parts store every time I'm there :)

@shadels_load 3 жыл бұрын

I love how he replies to comments on a 3 year old video, now that's dedication.

@ProjectFarm 3 жыл бұрын

Thanks!

@I_killed_that_beard_guy 2 жыл бұрын

He is friend of Chrisfix that's why

@A.C.71 2 жыл бұрын

@@ProjectFarm Thumbs up and comment just for replying to the comment of how you comment on a 3 years old video..lol

@johncollins5552 2 жыл бұрын

We are going to test that😉

@paulmurphy2503 2 жыл бұрын

Its a bot that replys

@sweypheonix Жыл бұрын

Everyone else is so impressed with his dedication and scientific rigor and I am as well. But I'm so much more impressed that he said "nuts" and "penetration" 100 times and didn't snicker once! He's like a real adult!

@Friend_of_the_One-Eyed_Ladies Жыл бұрын

You need better friends.

@susmongusidkaltaccountbass4301 Жыл бұрын

Sad the copied comment got more attention

@markh.6687 Жыл бұрын

Uh....he said "nuts"....huh huh huh! -- Beavis from Bevis and Butt-Head

@sweypheonix Жыл бұрын

@@Friend_of_the_One-Eyed_Ladies Better implies that I have any to begin with

@sweypheonix Жыл бұрын

@fosterpainter 2 people aren't as cool as you

@elektro3000 Жыл бұрын

I was always taught that PB Blaster and other penetrating oils work best if left to work for a LONG time, at least overnight if not 24 hours. Sure, sometimes I spray it on with less than 5 minutes to work, but my experience is that spraying the day before works MUCH better. No hard data to back it up, though. I'd love to see you give the PB Blaster, Liquid Wrench, and Seafoam Deep Creep a 24 hour test.

@ProjectFarm Жыл бұрын

Thanks for the video idea.

@trellway 7 ай бұрын

PB Blaster has been around forever I think since the 50's I was surprised to not see it here to be tested.

@ayodeledavidakinpelu7936 6 ай бұрын

Exactly!!! Add pb blaster to the lineup

@timwelsh3630 4 ай бұрын

@@ayodeledavidakinpelu7936he tested PB blaster in the video before this it was actually one of the worst performing ones

@harveywallbanger3123 4 ай бұрын

Not all threads are seized for the same reason. Penetrating oil does not help if the threads are seized due to physical deformation due to heat or excessive force. This can sometimes happen on even a single thread without you realizing it, and no amount of soak will fix it. I still do a 24 hour soak anyway. If it won't break loose then, I go straight to the oxy-acetylene torch and get serious. Learned this lesson the hard way many times over.

@tyler70878 3 жыл бұрын

This guy always does every test the RIGHT way, and most controlled I've found compared to the rest of the KZfaqrs👌

@ProjectFarm 3 жыл бұрын

I appreciate that!

@CHEVI789 3 жыл бұрын

I agree, love watching this guy's comparisons, he's saved me from buying crappy products, the companies that he shows are best SHOULD pay him a fee.

@vessmachineen193 3 жыл бұрын

yes you are right

@bucracass1196 3 жыл бұрын

I agree he is pretty thorough on things he does

@jsteez7656 3 жыл бұрын

Project Farm probably cause he made it p

@gleb7247 4 жыл бұрын

me at 3 am: time to go sleep also me: watches video about penetrating oil

@DeliriantPsychosis1442 4 жыл бұрын

Subbotnik 4:45 am currently

@SomeRightGuy 4 жыл бұрын

Try explaining to anyone why penetrating lube videos at 3 am is perfectly normal

@louisronan5903 4 жыл бұрын

Right here with ya.

@kennfn4077 4 жыл бұрын

Me right now

@Ashphinchtersayswhat 4 жыл бұрын

Need to get out more

@kliajesal4592 7 ай бұрын

It's amazing to see how much the presentation of this channel has improved over the years.

@ProjectFarm 7 ай бұрын

Thanks!

@Turco949 3 ай бұрын

Only rational to expect it; success requires constant development/improvement. In the long term, 'Status Quo' is bad for business success.

@23Butanedione 3 ай бұрын

I thought you said penetration

@kiiiburn 7 ай бұрын

The prices on these things have skyrocketed (like most other things). Thanks for the video, your methods are great and the condensed videos make for easy watching and learning.

@ProjectFarm 7 ай бұрын

Thanks and you are welcome!

@jlo82585 5 жыл бұрын

"in the real world, no one waits three hours before doing the job" as a government employee I can tell you that you are wrong.

@ProjectFarm 5 жыл бұрын

lol. This is hilarious!

@mommytkl 5 жыл бұрын

Lmao

@ThickThock 5 жыл бұрын

lol truth

@dustinlittle2214 5 жыл бұрын

I too can attest to that however on my own personal projects I will spray lubricant on the night prior and come back to it the next day. I'd rather be patient than have to drill out a stripped or broken bolt

@cashmoney7497 5 жыл бұрын

Jon long I wait 15 minutes.

@electronicsNmore 6 жыл бұрын

Some companies love you, and some aren't too happy with you, but your viewers love what you do. 😀

@ProjectFarm 6 жыл бұрын

You've got a GREAT channel. Thank you for taking time to comment on this video. I really try hard to provide a fair test and hope that companies and viewers are content with the testing methods. Thanks again!

@wobblysauce 6 жыл бұрын

@SamDru 6 жыл бұрын

electronicsNmore well said

@electronicsNmore 6 жыл бұрын

coviekiller5 The only problem with a video going viral is that you greatly increase the odds of lowlifes, trolls, and other degenerates posting comments on your video. I've been though it a few times, and still deal with it on a daily basis.

@aafjeyakubu5124 6 жыл бұрын

This video right here is just one reason why I love this channel.

@blueridgetroutdad Жыл бұрын

This is my favorite site. Some guys who are subject matter experts beat you up a little. No worries. They know a lot about that one subject. Most of them flaunt their knowledge in a courteous way educating others who want to go that deep. For the rest of us who on a broad talent and skill field want to do our best, jack of all trades - master of none, you hit the bulls eye. Thanks for giving us knowledge to the equipment 99% of us jacks want, need and use. Good job!😊

@ProjectFarm Жыл бұрын

Thanks!

@marcomejia2197 Жыл бұрын

I believe this video is the reason you channel blew up and made me watch all your videos ! Thank you !!

@ProjectFarm Жыл бұрын

Thanks for sharing!

@remizu2901 3 жыл бұрын

The fact that this guy takes the time to reply to his viewers comments makes me happy. Take my sub.

@ProjectFarm 3 жыл бұрын

Thanks for watching and subscribing!

@shahied123 3 жыл бұрын

Same

@scotth.4840 3 жыл бұрын

The fact that he still replies to comments on videos that he uploaded over 2 years ago is what I like.

@TheTechAdmin 2 жыл бұрын

I absolutely love that you have such a _strong_ understanding of scientific method. I don't like when some people pick and choose when to be precise during an experiment.

@ProjectFarm 2 жыл бұрын

Thanks!

@Projectfusion Жыл бұрын

I use these videos to teach my students the scientific method.

@TheTechAdmin Жыл бұрын

@@Projectfusion That's great. For each test, you should ask: - Why is he doing *_this_* test? - How could you make this test better? (There won't always be an answer for this)

@trvman1 Жыл бұрын

My only suggestion is when you do these test, is how about putting the bolts sideways or horizontal rather then vertical when putting on these oils. I don't know about most people but the nut/bot's I usually have to get lose are sideways. So the oil won't penetrate as easily as what is shown in this video.

@doltBmB 11 ай бұрын

there is no scientific method

@armsrooterplumbingservices6718 Жыл бұрын

I own a plumbing business with my dad. The most difficult part for me as a woman is loosening up corroded old screws. We come across them a lot. Thank you so much

@ProjectFarm Жыл бұрын

Thanks for the feedback.

@BH-gh6qm 7 ай бұрын

i could help you unclog your pipes

@yayisnotasinger 7 ай бұрын

yikes bro.. @@BH-gh6qm

@jeffystevens 2 ай бұрын

@@BH-gh6qmlmao 😅

@wmcourte5161 2 ай бұрын

@@BH-gh6qm😹😹

@excellenceinanimation960 9 ай бұрын

You did a great job and I appriciate all the hard work you put into the testing!

@ProjectFarm 9 ай бұрын

Thanks and you are welcome!

@Josmi 3 жыл бұрын

I really don't know why KZfaq showed this to me, but I am pretty happy. Great vid!

@ProjectFarm 3 жыл бұрын

Glad you enjoyed it!

@OneDayIMay91Bil 3 жыл бұрын

Hahah i have no reason to have got this as a prompt either , but glad I did great vid lets bump that algorithm and comment and like

@tanujkumar321 3 жыл бұрын

@rebeccaconlon9743 3 жыл бұрын

Same here

@2handsome2die 3 жыл бұрын

Same.

@aregaminghd 5 жыл бұрын

Don't ever stop what you're doing. You're 1 in a million. Most others in your position would've taken sponsorships from companies to talk up their products a long time ago.

@ProjectFarm 5 жыл бұрын

Thank you very much!

@chubsfatboy2738 4 жыл бұрын

He did by not trying PB Blaster that's the best there is and works in seconds

@BAPcaptures Жыл бұрын

keep on doing what you do. You are great. factual, informative, really enjoyable.

@ProjectFarm Жыл бұрын

Thanks, will do!

@codyg7936 Жыл бұрын

@@ProjectFarmHow about testing different 10k winches? I’m not sure if anyone has suggested this but I couldn’t find a video for it, thanks for all you do!

@McNateDoggYT 5 ай бұрын

Dude honestly thankyou for the hard work I truly appreciate your admiration for educating and informing others it’s been a pleasure to watch!

@ProjectFarm 5 ай бұрын

Thanks!

@bobbywshunter 4 жыл бұрын

PB Blaster would be what I want to see, that's been my go to for years.

@ProjectFarm 4 жыл бұрын

Thanks for the video idea.

@SnakesWrath 3 жыл бұрын

Same here. PB Blaster should be compared to the ones that actually worked on this video

@Alkatross 3 жыл бұрын

I know pb blaster works. But I wonder how it stacks up here. My guess is somewhere on the seafoam side.. Too bad the world will never know. I'm shocked at how similar they all are.

@jasonkubik1016 3 жыл бұрын

I chose Mopar penetrant over Pb!

@MrMarco7259 3 жыл бұрын

PB Blaster for the win! If that dont work, break out the torch.

@machieltipo 2 жыл бұрын

As good of a video as this is, its amazing to me that your videos have gotten significantly better since 2018. Just speaks to the standard that you've established for what a great product testing video looks like.

@ProjectFarm 2 жыл бұрын

Thank you very much!

@Mr.Avuncular Жыл бұрын

@@ProjectFarm hey I've found something if you can find it in your area in which you live i stumbled upon a dye used by a titanium casting company here in Oregon that just so happened was my neighbor who lived next to me worked at the place he said he had some stuff and it had the color of a yellowish antifreeze but the consistency of WD 40 I'm telling ya this stuff is the bomb it will creep, unstick,loosen remove undo just about anything if there was a space in the part when it was new this stuff would get into it and break it free.A gallon of this stuff lasted me 8 years totally awesome liquid penetrant but was florescent under black light and worked 110% everytime 👍👍

@Deontjie Жыл бұрын

He should have tested Q20 as well. The original.

@THEBULLETPROOFGARAGE Жыл бұрын

Really love how methodical you were with this test! I learned a lot!!! Thanks!

@ProjectFarm Жыл бұрын

You are welcome! Glad to hear!

@Andrelaflay 3 ай бұрын

this whole channel is a literal God send

@ryancrisp6786 3 жыл бұрын

Let's all take a minute to appreciate the time it took to make this video, just in an attempt to save our knuckles from snapping off bolts.

@ProjectFarm 3 жыл бұрын

Thank you very much!

@plageran 3 жыл бұрын

3 hours waiting compared to a headache of drilling and retapping threads

@jeremyc4893 2 жыл бұрын

@@plageran Patience is a virtue.

@plageran 2 жыл бұрын

@@jeremyc4893 yup

@fisher1512 2 жыл бұрын

always remember, every 2 hour job is one broken bolt away from becoming a 3 day ordeal.

@dannymalone6400 2 жыл бұрын

Having been a mechanic at a lawn care company, working around salt rusted equipment, fluid film is not a penetrating oil. It is a protective film for moving parts. I used it on the chains and motors of salt spreaders. PB blaster seems to work the best for penetrating oil tho. Great video man

@ProjectFarm 2 жыл бұрын

Thanks so much! Thanks for sharing.

@donaldbarton6701 2 жыл бұрын

Agreed. PB blaster is my absolute favorite

@hillbilly4christ638 2 жыл бұрын

Right blaster! Kroil or mmo are good choices.

@rockytop4 2 жыл бұрын

@@hillbilly4christ638 kano nashville tn higher than a cat's back great stuff but yes pb is my winner for the $

@sgtrock1 2 жыл бұрын

Correct.

@leviq9445 Жыл бұрын

My dads a machine mechanic and he got me in to watching these videos I do maintenance and it’s very helpful!! Thank you 😊

@ProjectFarm Жыл бұрын

You are welcome! Thanks for sharing.

@NotMyRealNameBro Жыл бұрын

You are my go to video expert/scientist when it comes to settling arguments with my friends on superior products. Nobody performs tests on the same degree as you. Thanks for your work

@ProjectFarm Жыл бұрын

You are welcome!

@JerryRigEverything 5 жыл бұрын

That electronic torque gizmo is sweet.

@ProjectFarm 5 жыл бұрын

Thank you!

@johns5591 5 жыл бұрын

There are a lot of different types of those, some used to connect to a data logger for testing etc. Not terribly expensive either, but they need periodic calibration.

@RugalBernsteinOfficial 5 жыл бұрын

Now i see why KZfaq recommended me this video

@RealNovgorod 5 жыл бұрын

That space pen is sweet!

@techsupportranjit7637 5 жыл бұрын

I dare you to durability test me

@bucknaked9095 3 жыл бұрын

Years ago I learned that after spraying Liquid Wrench, I would tap several times on the seized piece. Theoretically, the tapping would set up vibration to allow the product to flow in better. Worked about 85% of time, thirty years ago.

@ProjectFarm 3 жыл бұрын

Great tip!

@christianswakeup3004 3 жыл бұрын

60% of the time, it works all the time

@giovanniderose192 3 жыл бұрын

Normally I would first complete this step when I kick it a few times out of anger.

@mousetoad7040 3 жыл бұрын

even tapping without fluid can help break the rust loose, but with fluid is better of course

@MrE_ 3 жыл бұрын

@@christianswakeup3004 50% of the time it worked 60% of the time

@Jourei_ 9 ай бұрын

Damn, I really like the calmer style, slower and no yelling.

@pennellorob 8 ай бұрын

A video actually worth my time that I watched in its entirety. Well done

@ProjectFarm 8 ай бұрын

Thanks!

@lynth 3 жыл бұрын

Me: Never do anything involving any kind of mechanic work. KZfaq: Hey, you wanna watch this 11 minute video of someone testing different kinds of rust dissolving fluids to better work with mechanical parts? Me: "Uh... sure, let's take a look!"

@ProjectFarm 3 жыл бұрын

Thanks for watching!

@ridhosamudro2199 3 жыл бұрын

Pretty sure now karma has marked you and "that one screw" is rusted shut by fate

@NotionSeller 3 жыл бұрын

literally me

@MalaysianTropikfusion 3 жыл бұрын

@lynth Yeah, I'm like you, too. I guess the technicality was what drew me to watch it. I don't even do any DIY.

@SickPerversions 3 жыл бұрын

I dunno how i ended up watching this, but... here, take my like, sir.

@ProjectFarm 3 жыл бұрын

Thanks!

@THE_Mirage 3 жыл бұрын

Yeah same...

@BabaFragmentsAlter 3 жыл бұрын

yeah same

@vanmann8347 Жыл бұрын

You are top shelf sir. Your videos are always thorough and informative. Thanks

@ProjectFarm Жыл бұрын

I appreciate that! Thanks!

@ryanwalker1457 Жыл бұрын

Kroil penetrate oil is an rust penetrate oil that I would like to have seen in your test. I use it at work and has done a good job for me. Love to see how it stacks against the rest.

@Kehbster 11 ай бұрын

It finished last place in the first episode.

@RichardPubesJr. 11 ай бұрын

If you read this in an old timey gangster/gagster voice, its pretty good.

@jennajone45 10 ай бұрын

My job uses Kroil too

@Rotary12 9 ай бұрын

I like kroil and seems to work better than others.

@YesuAiNimen 5 жыл бұрын

This guys videos are really cool. The best part is how is more than willing, even eager for legit criticism. That's the sign of a person who is genuinely striving to be better.

@ProjectFarm 5 жыл бұрын

Thank you very much! I like constructive criticism a lot. It has helped me improve the science that goes into testing products. My goal is to give each product a fair test and figure out which ones are the best. I've purchased too many poor quality products in my lifetime, wasting time and money. I want to find out for myself and others which ones are best. Thanks again!

@MP-bi9gd 5 жыл бұрын

I totally agree!! Great video, very detailed & he listens and communicates w/his audience!! Im about to subscribe!

@MidnightPolaris800 5 жыл бұрын

vuduhwy completely agree. My favorite channel on youtube

@robinmurphy3085 2 жыл бұрын

I was a mechanic, I used a lot of penetrating oils ! At that time PBBlaster was the best but had / has very high VOC’s .. then I was working on a friends AC and ran into town to get Blaster, but the parts store didn’t even carry it. They had Free all penetrating oil and the salesman claimed it’s better than anything he has used! Reluctantly I bought a can and it’s now the only product I use! I literally drive an hour to buy it if I run out! It is that good, and has much lower VOC’s just an FYI! I always enjoy your channel and the smart ways you go about everything! Thanks!

@ProjectFarm 2 жыл бұрын

Great feedback on the Free All! Thank you

@lifediversified8932 2 жыл бұрын

it makes me VERY pleased to read that VOCs are a consideration and with all the eyes on this vid, the ripples should make a positive difference. well-done video. i've watched it more than once since its release.

@amirabelardo8203 2 жыл бұрын

I will give it a shot too for my diy .thank you .that is the one with blue writings on the label right?

@americanstriper8666 2 жыл бұрын

What is VOC?

@lifediversified8932 2 жыл бұрын

@@americanstriper8666 volatile organic compond

@westsolon7480 Жыл бұрын

Thank you for superb content, concise info, linear logic & all your effort❗️

@ProjectFarm Жыл бұрын

You are welcome!

@randomthingch1970 Жыл бұрын

looking at this older video, i just freaking love how far you came from love from indonesia!

@ProjectFarm Жыл бұрын

Thanks!

@hayabvsa 4 жыл бұрын

* Should be sleeping 3 hours ago. . . * "Oh nice a random video about penetrating oil! Let's see whats up with that first!"

@ProjectFarm 4 жыл бұрын

Lol

@rahuldoes 4 жыл бұрын

Hayabusa隼 Sad reality of our vacuous lives.

@noddymilsom 4 жыл бұрын

Yeah, I’m supposed to be going on a 5k run.. ooh look oil

@Moicetto 4 жыл бұрын

Same

@godfistleesin1971 4 жыл бұрын

i swear this is me everyday :D :D going down the youtube rabbit hole at 4 am is the highlights of my days

@daniels5040 4 жыл бұрын

Why am i watching this, i'm not even a mechanic

@ProjectFarm 4 жыл бұрын

Thank you for the feedback!

@daniels5040 4 жыл бұрын

@@ProjectFarm No problem, but i appreciate your video, maybe it'll be useful for me in 3 or 4 years.

@daniels5040 4 жыл бұрын

@el bojo loco well, he might think it is

@mhale1982 4 жыл бұрын

Right? Me too. Super interesting though!

@premzyy1791 4 жыл бұрын

You are one now

@TheJackFlash Жыл бұрын

This guy's channel is f*cking awesome. He asks the questions I have always been curious about. Thanks!

@ProjectFarm Жыл бұрын

Thanks so much!

@anselrod5699 Жыл бұрын

Excellent as usual, your videos are exemplary!

@ProjectFarm Жыл бұрын

Thank you!

@jimmy4x4socal44 6 жыл бұрын

Hardest working guy on KZfaq! Thank you for your dedication! Thumbs up 👍🏻

@ProjectFarm 6 жыл бұрын

Thank you!

@jfk64kennedy95 3 жыл бұрын

dude, highly recommend gloves, just had 3 friends in late 50's, early 60's 1 auto mechanic and 2 furnace service techs, who never wore gloves die from a form of Leukemia that petroleum exposure a cause

@ProjectFarm 3 жыл бұрын

Thanks for the recommendation.

@mrraz9820 3 жыл бұрын

We are gona test that

@Oblithian 3 жыл бұрын

@@mrraz9820 yeah I hope not by getting leukemia

@lunchie80 3 жыл бұрын

I just finished a long term employment with a major oil company in the refining sector. Can confirm a suspicious number of Cancer related deaths in fit and younger people with NO family history, SPECIFICALLY around the production of the 'solvent' end of the product spectrum. Specifically Naphtha and its derivatives. LHN or Light Hydrotreated Naphtha(a process unit feed stock cut around the C5 to C7 hydrocarbon range) is used in a LOT of automotive chemicals, specifically brake cleaners and such. LHN is very high in Benzene by weight and benzene is bad news.

@ministryofwrongthink6962 3 жыл бұрын

@@mrraz9820 dude.. lmao

@CM-vy2ce Жыл бұрын

Knock er loose always works.. Sometimes I apply it 3 times daily for 3 days and the WORST rusted bolt will come loose

@ProjectFarm Жыл бұрын

Thanks for the feedback.

@keningilbert Жыл бұрын

Great video as always! IMO it’s rare for anyone to wait more than a few minutes.

@ProjectFarm Жыл бұрын

Thanks! Thanks for the feedback.

@shanemaurer6698 4 жыл бұрын

I've no idea about anything I just watched, yet I loved every second of it.

@ProjectFarm 4 жыл бұрын

Thank you for the positive comment!

@endmesomebody1253 4 жыл бұрын

This man seems so wholesome i wanna meet him

@ProjectFarm 4 жыл бұрын

Thank you very much!

@bilbobaggins4710 4 жыл бұрын

Gay

@guybrooks3480 4 жыл бұрын

@@bilbobaggins4710 are you admitting that here , or......?

@chethaynes5802 4 жыл бұрын

You are correct. He once issued himself a warning ticket for traveling 5mph over the speed limit ! :-P ! :-P

@TheSecondR 4 жыл бұрын

reddit, get tf out of here

@benisplayin Жыл бұрын

The test is very well designed. There are many variations and conditions to factor in allowing an accurate decision to be made. Just by having more than one bolt tested for each product under the same procedure eliminates many test variables. Nice work. I do so enjoy!

@hhyperdd Жыл бұрын

I have really come to enjoy your videos. Great and relevant topics. Good work.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@TheJttv 6 жыл бұрын

Love the acrylic demo. Would not be surprised if that method gets used to advertise in the future.

@ProjectFarm 6 жыл бұрын

Thank you!

@matel1s 6 жыл бұрын

Acrylic looks nice, but i think it shows not how good it penetrates rust, but how good it desolves plastic.

@102819921 6 жыл бұрын

Odious Ktenology ok, kind of a misnomer here. Just don't mix pool tablets and organic solvents. Methanol, ethanol, gasoline, they will all do that... Boom.

@bobedwards8896 6 жыл бұрын

i agree, i think a way of showing how deep it gets through is simply drilling holes around the material being screwed into, at different places vertically

@Marco-fi6gv 6 жыл бұрын

You need to test PB blaster. It's the best stuff I've ever used.

@matthewkringle2599 3 жыл бұрын

I’ve been recommended this video for 2 years now and I have finally obeyed KZfaq. They knew I would eventually click it

@ProjectFarm 3 жыл бұрын

Thanks for sharing.

@chaplainmattsanders4884 3 жыл бұрын

😂 me too!

@Engineer9736 2 жыл бұрын

Lol

@HerpDerpson210 9 ай бұрын

i like your testing style this is definitely how you should test and compare products from different manufacturer

@ProjectFarm 9 ай бұрын

Thank you!

@johnrtrucker 4 ай бұрын

I always love coming back to older videos! Nostalgia! Lol one thing that makes or breaks a fluid in my book is how well it creeps up the threads from below. Maybe a possible future video?? 😂

@averyalexander2303 6 жыл бұрын

I would love to see rust preventives tested. As I say, prevention is the best cure.

@ProjectFarm 6 жыл бұрын

Great recommendation--I'll do it!

@stormsilagy5744 6 жыл бұрын

If you do this check out some of the gun lube/rust preventatives on the market. The one that consistently comes in first in tests I've seen is Hornady One Shot

@kreizmann2943 6 жыл бұрын

Project Farm sweet would be useful to know for the rust on my atv

@hoepsipoepsi 6 жыл бұрын

Stonechip for the bottom sand it smooth and then paint with normal coloured paint of the car + clear coat for the bottom of it Looks stock Totally prevents rust forever For the rest... Just keep all dry and if not possible... Make caps over it to make water gets off of that spot instead of being still water (for like battery/fuse trays with old Fords)

@TBPony 6 жыл бұрын

yes please, i would also love to see a video that shows how actually "rust preventative" these products are as they claim.

@willstewich 3 жыл бұрын

One minute into this video and I’ve come to the realization that genuinely the world goes around because people like you put stuff like this on KZfaq I’m serious I really think what you do is so important thank you

@ProjectFarm 3 жыл бұрын

You are welcome!

@tenncutt 3 жыл бұрын

Pretty sure the world went around before youtube!

@wascawywabbit0987 3 жыл бұрын

@@tenncutt Nope. It was flat.

@tenncutt 3 жыл бұрын

@@wascawywabbit0987 oh yeah i forgot. Wait I thought it still was...

@wascawywabbit0987 3 жыл бұрын

@@tenncutt :)

@Ambivadox 9 ай бұрын

PB blaster every day for about a week prior and have yet to have a bolt/nut not come off easily. Love your videos.

@ProjectFarm 9 ай бұрын

Thanks!

@mrmagoo2255 9 ай бұрын

THE best penetrant is 50/50 acetone and ATF. NOTHING else comes close!! P.S. only mix small amount because the acetone evaporates and you will need to add a bit more next time you want to use it. Also, do not be impatient, leave at least overnight. This was first used by the U.S. Military in WW2. (even though I am an Aussie. )

@ChevyRedneckGFX 5 ай бұрын

He's tested it

@mercman446 6 жыл бұрын

I like the Seafoam vs. Liquid Wrench showdown idea! Another good video, BTW.

@ProjectFarm 6 жыл бұрын

Thank you very much!

@viperkill3 6 жыл бұрын

Project Farm I'd also like to see this and to cover both test do a set of bolts like you did in this video and a second set like you did in the other and see if the results stay the same

@fringestream990 6 жыл бұрын

Sea foam just seems to be a great overall brand.

@mikewilliams9739 6 жыл бұрын

Yes, this sounds like an interesting showdown. I'd love to see it too!

@cabinlife1886 6 жыл бұрын

I agree. Liquid wrench sells good here and I have a can of that. I want to know. Please test

@LukeCunningham 2 жыл бұрын

I think the drip application method may have hindered the performance of some of the foaming oils, but I recognize just how hard it is to try to isolate all the variables.

@aaronschocke2147 Жыл бұрын

I use aluminum foil tape. It will cut through the tape eventually, but it can take long enough easily "bathe" bolts in awkward positions!!

@aaronschocke2147 Жыл бұрын

Use it to cup around the stubborn hardware

@zebedeesummers4413 Жыл бұрын

yeah I know the amount used won't be as standard but the form is often there on purpose.

@DrifterZigzag Жыл бұрын

Heck ya i spray the f outta automotive stuff a bit rusty. I try not to risk breaking stuff

@tylergreen2113 Жыл бұрын

I felt that way with the WD-40, I explained in my own comment but I sprayed each nut down good, waited 15-30 min sprayed them again and went in and they came right off

@crazyliclay Жыл бұрын

Man it's crazy to see how your channel has evolved over these years! Glad to see you've continued your mission! Good work and God bless!

@ProjectFarm Жыл бұрын

Thanks so much!

@merritts3515 11 ай бұрын

I've been getting in the habit of spraying Down rusted bolts days before I plan on wrenching. Very helpful

@ProjectFarm 11 ай бұрын

Thanks for the feedback.

@mandc20022 2 жыл бұрын

What I love the most about your videos is, you get straight to the point and dont try to fluff the length of the video, this is the quality content I appreciate.

@ProjectFarm 2 жыл бұрын

Thank you!

@email6743 Жыл бұрын

Jesus is the way, the truth and life, no man comes to the Father but by Him. To believe in Jesus Christ and His blood sacrifice for YOUR sins, you have passed from death to life, to believe not you are condemned already.

@navyretired230 2 жыл бұрын

In the Navy we used wintergreen oil found in the medial lab to loosen slat corroded bolts. Environmentally friendly and easy to find. Also helps with sore muscles.

@faultyinterface 2 жыл бұрын

Felt like we used Wintergreen or Meangreen for just about everything.

@johndough6813 2 жыл бұрын

Probably could even put it on toast.

@lennyb7301 2 жыл бұрын

Yes, wintergreen was a "secret" rust buster my Master Chief turned me onto.

@totallynotdelinquent5933 2 жыл бұрын

wintergreen turns into the active ingredient in aspirin in your body, which is why it helps with sore muscles. It's also why you should be very careful with the ingestion of it, and why it should be kept away from kids

@dentoncrimescene 2 жыл бұрын

Sailors use it as penetrating oil?!

@Squid-MAS4167 Жыл бұрын

Your videos are so good keep it up!

@vplph Ай бұрын

Surprised how relaxed this video actually was compared to your nowadays' work(2024) . It has become .... speedy 😉👍

@suamesmacdaih3134 3 жыл бұрын

I loved this video as an auto technician deep creep is my go to. Usually I wait 30 minutes after with very little applied! It’s never failed me.

@ProjectFarm 3 жыл бұрын

That is awesome!

@bobpaulino4714 2 жыл бұрын

Try Kano's Aero-Kroil sometime. I like seafoam but have switched to Aero-Kroil for the tough jobs.

@rickevans3959 2 жыл бұрын

Use the Heat wrench

@raycox1971 2 жыл бұрын

I'm ordering 2 cans now!!

@andrewp.6844 2 жыл бұрын

I'd like to see the same test performed on a upward-facing bolt where you can't get to the threaded side

@ianmackenzie686 2 жыл бұрын

Oh yeah. The real world examples. Top bolts of shock absorbers would a great real work test.

@paulcopeland9035 2 жыл бұрын

Why? The stuff doesn't work in the best of conditions, why make it harder on the "poor things"!?

@WingMaster562 2 жыл бұрын

@@paulcopeland9035 for science, shits and giggles. I mean, some of those even advertise that they work even upside down, whether that holds up to their claim and whether other products can do similar. Im curious too Also video did ask for recommendations for ideas

@fukkitful 2 жыл бұрын

Capillary action

@j.m.5744 2 жыл бұрын

That is pointless. When you're conducting tests to determine if a product simply works as intended, any scientist would start with a basic test. If the product fails on a basic test, then you have your answer without creating multiple situations. When the product demonstrates an ability to work under simple conditions, this would then be the time to change the test.

@binks2413 Жыл бұрын

I love fluid film as a rust preventer. I've used it on man lifts, door tracks etc.

@ProjectFarm Жыл бұрын

Thanks for sharing.

@VirginiaYoung-lc9mi Жыл бұрын

But I'm so much more impressed that he said "nuts" and "penetration" 100 times and didn't snicker once! He's like a real adult!

@ProjectFarm Жыл бұрын

Thank you

@PerryCox818 Жыл бұрын

However I'm sure your comment made him laugh. 😆

@Gobrice Жыл бұрын

Bot - downvote, copied a previous comment.

@doctorelijah Жыл бұрын

@@ProjectFarm This comment is copied.

@KrispyStark Жыл бұрын

Bot - downvote, copied a previous comment.

@justanobserver530 2 жыл бұрын

I do realize that you generally don't have hours to wait but when you do it really makes a difference on what works. I restore cars and I really don't mind when things that work the best take a while. I have used most everything, I think, and found Kroil oil seems to work the best. It sometimes takes much longer than most people are willing to wait but it's my go to.

@medicmule 2 жыл бұрын

When working on my own machines, I sometimes let things soak overnight as long as I don't need the machine immediately... Getting out a torch or broken bolts slow me down a lot more than just waiting.

@jerrygaber6150 2 жыл бұрын

I once rebuilt spring shackles on a 73 Nova spraying them with wd40 every day for 2 weeks. If you take time like that, go cheap. Works great!

@MrBadboy6061 2 жыл бұрын

If I have it, Kroil is the best, if not, I always use PB Blaster, everything else just takes too much time

@TitoRigatoni 2 жыл бұрын

@@medicmule yeah same here. I'm rarely doing just one job at a time, if I run into a stuck bolt I'll oil it and move on to a different job for a few hours.

@johnmccallie2889 2 жыл бұрын

I've always sworn by PB-Blaster. I would love to see how it stacks up.

@pitterpatter3887 2 жыл бұрын

PB-Blaster is the best, 20 years in the trade it never failed me.

@ProjectFarm 2 жыл бұрын

Thanks for the video idea.

@mabmf3824 2 жыл бұрын

@@ProjectFarm i also wanted to see PB blaster , been using it 25 years.

@truckinbobb 2 жыл бұрын

It was in the first group he tested.

@jeremyTallen1 2 жыл бұрын

Is there anything else?

@user-ik5mn8qv5z 11 ай бұрын

Nice recommendation at 2:37 in the morning. It’s this kind of content I’m looking for when I’m trying to sleep.

@timdavanzati7510 4 күн бұрын

What a great and practical science experiment!

@ProjectFarm 3 күн бұрын

Thanks!

@davidhunsinger1587 5 жыл бұрын

*I can smell this video*

@ProjectFarm 5 жыл бұрын

lol

@red__guy 5 жыл бұрын

The smell of menliness

@poolguy101 5 жыл бұрын

I feel like I'm in my garage now

@kevinwaycaster 5 жыл бұрын

Most accurate comment on yt man!

@lorenfoster1037 5 жыл бұрын

You can really smell it in real life

@YvesLopez 4 жыл бұрын

What about PB Blaster? It is what we always go to first to put on rusted threads.

@KC9UDX 4 жыл бұрын

PBlaster works as a decent air tool oil if you can handle the stink. And then there's Kroil.

@Slayer8615 4 жыл бұрын

In PB we trust

@Skeetor43 4 жыл бұрын

Mechanic for over 30 years here, PB Blaster is my go to penetrating oil.

@carinhall4508 4 жыл бұрын

@@KC9UDX , I'm really disappointed there's not more Kroil comments

@KC9UDX 4 жыл бұрын

@@carinhall4508 me too. It sure beats PBlaster in my experience. My favorite was a pressed in 40" x 8" bearing race in a VTL. We put as much hydraulic pressure on it as we could and nothing happened. We spent a few hours pounding on it and nothing happened. So I said "what the heck, let's see what happens" and poured Kroil all around the perimeter and we planned to wait fifteen minutes for it to kreep in if it could. After 6 or 7 minutes it started creaking and popped right out whilst we were standing there. I just can't believe that PBlaster or any of the other oils I've used over the years would've krept in there.

@johnherrmann7464 Жыл бұрын

Great video, as always! If you do another video, I'd be interested in seeing Kroil included. Thanks!

@ProjectFarm Жыл бұрын

Thanks! Thanks for the suggestion.

@billmadle1235 Жыл бұрын

Such an amazing test very impressed

@ProjectFarm Жыл бұрын

Thanks!

@shoyo3616 4 жыл бұрын

Me: I should be celebrating New year with my family KZfaq: wanna see which oil is better? Me: *YES*

@ProjectFarm 4 жыл бұрын

lol! Happy New Year!

@shoyo3616 4 жыл бұрын

@@ProjectFarm happy new year aswell!

@clarkgwozdecki6782 4 жыл бұрын

Funniest KZfaq comment I have read in a long time lol

@Magnabee97 2 жыл бұрын

I always used Liquid Wrench, but after seeing how well the Seafoam worked I’ll be switching to that. Another great video with very useful info. Thanks

@ProjectFarm 2 жыл бұрын

Thanks for th feedback.

@JJ-my9uw Жыл бұрын

Absolutely appreciate right in front announce the two top winners. Hate being strung along. “This one secret will change your life” after a 30 minute video that does not tell the one secret but does provide an address to get it. Lol blow it out your whatttt!

@hobbitreet 2 ай бұрын

Science teachers, this is one of the best examples of the scientific method that you could use for teaching the concept.

@dragos-lucian 3 жыл бұрын

Project Farm: We'll check the bolts in an hour. Me after waiting 2 minutes: I paid how much for this garbage?!

@LeK- 3 жыл бұрын

So I am not the only one! ✌

@dragos-lucian 3 жыл бұрын

@@LeK- Definitely not. 😂

@MrE_ 3 жыл бұрын

Lol. That's why shorter tests make sense for these products. Not many people wait the full several hours that the companies recommend

@mistercrimesb 3 жыл бұрын

Well I've had experiences with WD...and basically just spray it, leave couple mins, smash with a hammer few times(to kick the rust out). Spray again, wait a few mins. ;)

@dragos-lucian 3 жыл бұрын

@@mistercrimesb I cannot wait a few minutes though. I start twisting and trying immediately after spraying. Sometimes it works, sometimes it doesn't. I only have patience when I go fishing. 'Melting' rust I cannot wait.

@KUNIK.. 3 жыл бұрын

I as a computer science engineer having his exams tomorrow, am finding this video very useful

@firebladeflow 3 жыл бұрын

good luck ;) - now go learn you lazy bastard :D

@ProjectFarm 3 жыл бұрын

Thanks! Best wishes to you!

@c.a.g.3130 3 жыл бұрын

Check out the cat videos; GREAT for upcoming exams. Relied on them before my LSATs.

@TheNuclearBolton 3 жыл бұрын

Lol 😂😂😂😂😂😂😂

@firebladeflow 3 жыл бұрын

So did you pass?

@DJVINNIE Жыл бұрын

EXCELLENT AGAIN!! GREAT JOB AS ALWAYS THANKS!!

@ProjectFarm Жыл бұрын

Thanks!

@WarriorsPhoto Жыл бұрын

As a person dealing with old Rusty bolts. These tests make my purchases much easier. Thank you 🙏.

@ProjectFarm Жыл бұрын

You are welcome!

@mamaamaor 3 жыл бұрын

WD-40 never fails. That's why I spray my grandma's knees with it.

@EricTViking 3 жыл бұрын

I bet her knees have no signs of rust.

@rodneywilson1266 3 жыл бұрын

Heck I may have to try that! (7 knee surgeries)

@BlatentlyFakeName 3 жыл бұрын

WD40 isnt that great as a lubricant. ACF-50 is way better. XCP rust blocker for the best rust protection.

@R32vdubb 3 жыл бұрын

I might need your services soon Maor 😆

@Jpop11 3 жыл бұрын

😂😂

@steve_713_ 2 жыл бұрын

Would love to see Aero Kroil included in the next test. Thanks for the great video

@ProjectFarm 2 жыл бұрын

You are welcome! Great suggestion! Thank you.

@skeon67 2 жыл бұрын

Best I’ve used

@Buko360 Жыл бұрын

Yes. I was wondering about Kroil. That's good stuff

@johnb9045 Жыл бұрын

Can't believe Kano Kroil was not in the test. It will win hands down...

@levimatthew8911 Жыл бұрын

I think Aero Kroil is the best I've ever seen or used.

@amazingmachines3710 Жыл бұрын

Love your Channel, Very informative.

@ProjectFarm Жыл бұрын

Thanks and you are welcome!

@KWH803 Жыл бұрын

Great Job!!! Keep up the good work.

@ProjectFarm Жыл бұрын

Thanks, will do!

@09ThunderOne 6 жыл бұрын

Have you given thought to doing the plexiglass one but seeing if the penetrant will work upwards? Not all bolts are facing so that you can apply it from the top. Seeing if it wicks upwards would be interesting

@ProjectFarm 6 жыл бұрын

Great video idea--thank you!

@kwmiked 6 жыл бұрын

09ThunderOne only penetrate oil that I've seen creep up was the DURALUBE penetrate that came in a pump spray can. Not arasol . I'd put a drip on rusty metal and it would grow to half dollar size with in mins. I've never found it again anywhere

@stacyreid5077 6 жыл бұрын

I think that's an awesome idea cause on equipment there's always some that are upside down. Plus that plexiglass is awesome idea But wondering if it were molded on the bolt instead of being threaded or maybe put lock tite on it as you thread it on

@samgraham6355 6 жыл бұрын

Nice idea!

@circusboy90210 6 жыл бұрын

Capillary action would cause that, but if its rusted there no way. You'd need to apply it to the upper part of the bolt or nut

@Quantum- 2 жыл бұрын

I don't know about most people but I always prep my bolts the night before the job. I do my own work on my own vehicles. I'll soak them down night before, morning of and sometimes even a few minutes before actually doing the job. I get a lot of guys have little to no time to prep. But that time seems to make a good bit of difference for those that have the ability to utilize the time.

@ianmackenzie686 2 жыл бұрын

I'm with you. When not in a rush and having the luxury of time, I'll spray rusted bolts for several days and bang on with a chisel. This helped me remove three very rusted battery tray bolts with an air impact wrench.

@mrd4865 2 жыл бұрын

@@ianmackenzie686 Same here. Unfortunately there are many times where something breaks and needs to be fixed now. In those cases heat, spray and impact.

@dokterzorro 2 жыл бұрын

Soak in the evening, wrestle in the morning. Ye Olde '40 works just fine if ya give it time.

@trevorm7013 2 жыл бұрын

I just get out the breaker bars and impact wrenches and just start busting nuts all over the place

@i.am.the.beasti.worship8030 2 жыл бұрын

@@trevorm7013 skeet skeet skeet

@donaldlee6699 Жыл бұрын

As always! Quite informative! 1.) Sea foam. 2.! Acetone and ATF. Thanks for the video.

@ProjectFarm Жыл бұрын

You are welcome!

@hankschrader149 Жыл бұрын

17 MILLION views?!?! Congrats man well deserved!

@ProjectFarm Жыл бұрын

Thanks!

@chinncannon 2 жыл бұрын

I'm surprised to hear you say that 'nobody' waits three hours to let penetrating oil work in the real world! I was always told by my dad and other auto mechanics that if drilling out or extracting the bolt will be time consuming and expensive, then let the oil penetrate overnight and maybe even put some heat on it and spray more penetrating oil. It's often not feasable drilling out and re-tapping a bolt. Time and heat and oil are your friends.

@CP-tm7be 2 жыл бұрын

Right! When I use penetrating oil, it goes on the day before I try to extract the bolt or whatever. Sometimes a couple applications over 2 days. But that's just home use. Mechanics are under more time constraints.

@ProjectFarm 2 жыл бұрын

Great feedback. Thank you

@chronos2047 2 жыл бұрын

maybe you and your dad but on the dealer shop and regular shop they don't wait too much, time means money.

@Cautela 2 жыл бұрын

Yep this is the correct way to use penetrating fluid on stubborn bolts/nuts; sometimes a few minutes to an hour will do the trick, but that's just luck. Spray, re-apply, and leave it alone overnight has always worked for me on all manner of vehicle exhaust fasteners.

@iHelpSolveIt 2 жыл бұрын

That depends on your level of skill... And the size of bolt, for a 10mm bolt, centre punch three drill sizes and that done in less than 30mins

@assessor1276 3 жыл бұрын

This is great work and highly valuable! Re: Fluid Film - I have always considered it a corrosion preventer and not really a penetrant. I was surprised at how well the brake fluid seemed to work though.

@d3tk914 3 жыл бұрын

same for fluid film

@WSAONE 11 ай бұрын

This was a fun test, I like you are using the Space Pen as your pointer.

@ProjectFarm 11 ай бұрын

Thanks!

@michaellinner7772 7 ай бұрын

I have always had great results from all Seafoam products. I'm not too sure about brake fluid loosening nuts and bolts however, Dot 3 makes an excellent paint remover. Good job as always Todd.

@ProjectFarm 7 ай бұрын

Thank you!