Propane Tank Wood Stove

Рет қаралды 20,215

2 жыл бұрын

This tiny diy propane tank stove functions much like a Rocket Stove, sucking a large quantity of air through the front to cleanly and efficiently burn the wood leaving little exhuast. As a cnc machinist and a shop owner I have access to machinery that many diy makers do not but many other methods and equipment can be used to make this stove. Every part on this assembly can be made using a bridgeport mill, and with a lot of welding and grinding you can achieve similar results. I had considered making this a wood pellet patio heater but pellet availabiliy in warmer months in Michigan is limited I found out after making my wood pellet pool heater, and storage of the pellets is difficult in the spring and summer due to humidity. Updates on the secondary combustion burner and flue pipe enhancer coming soon. Please comment and subscribe and hit the notification bell to be notified of updates on this stove and our other upcoming videos.
Please visit our Ebay store to buy our manufacturing and metalworking products:
www.ebay.com/str/mvpmachine
MVP T-Shirts and Hoodies are here now:
mvp-merch-2.creator-spring.com
#diyWoodStove, #patioheater, #propanetankwoodstove #diypatioheater

Пікірлер: 66

@mvpmachine 6 ай бұрын

Check out our 2 year update on this stove to see how it held up here: kzfaq.info/get/bejne/gs6VbN2hv6fZoIE.html

@ahilbilyredneksopinion Жыл бұрын

I can't stop wantin that stove.....

@1943L 8 ай бұрын

Smart looking stove there, not just your average chopped up tank. Nice work.

@mvpmachine 8 ай бұрын

Thanks John!!!

@abiapierre Жыл бұрын

The best ever. That is pure art.

@mvpmachine Жыл бұрын

Thank you Abia Pierre!

@ahilbilyredneksopinion Жыл бұрын

Propane bottle stove 2 the max. Never seent sutcha good build.

@mvpmachine Жыл бұрын

Thank you HRO! I use this almost every day in spring through fall its in the shop now for new paint and a few minor mods.

@conemaher1841 Жыл бұрын

Absolutely astounding workmanship - Very impressive!

@mvpmachine Жыл бұрын

Thank you!!

@larryclark9150 9 ай бұрын

Fantastic stove

@mvpmachine 9 ай бұрын

Thanks Larry!

@ahilbilyredneksopinion Жыл бұрын

I see only one huge flaw with this entire video.......that's not my garage!where is mine?lol.... that's the sweetest propane stove anywhere on any format.

@mvpmachine Жыл бұрын

Thank you!! 😂

@YourOwnWay Жыл бұрын

Incredible quality. I’m impressed.

@mvpmachine Жыл бұрын

Thanks Dustin!

@royphair9676 2 жыл бұрын

Top quality craftsmanship is always great to see and appropriate

@mikeibrahim2914 2 жыл бұрын

Wow, what a beautiful machine, lots of time was probably consumed to make this awsome grill.💯👍

@mvpmachine 2 жыл бұрын

Thanks Mike! it's been consuming a lot of wood lately, I use it almost every day.

@Ed19601 6 ай бұрын

Lovely. Adding a baffle plate would probably i crease efficiency even more

@mvpmachine 6 ай бұрын

I kind of agree but I think that might work better if I were using it in an indoor application. Outside using it as a patio heater I sometimes have to trade efficiency for heat.

@dave1secondago 2 жыл бұрын

thats a awesome stove bro

@mvpmachine 2 жыл бұрын

Thanks Dave!

@jimmyupson1959 3 ай бұрын

Very nice. I made one very similar with the secondary burn fed from the back and the rocket effect fed from the front. Yours looks nicer. Nice video.

@mvpmachine 3 ай бұрын

Hey Jimmy thanks for watching and commenting! Did you have better luck with your secondary combustion? My secondary burner seems like it would work good in an indoor application but does little for me outdoors...Tim

@paulwatson4189 2 жыл бұрын

That's the best looking stove I've ever seen on you tube. I think you could give the cubic mini stove a run for there money. As soon as I saw the quality I knew you had to be a machinist. Again nice job man.

@mvpmachine 2 жыл бұрын

Thanks Paul! Just one of those ridiculous things a machinist does if given some spare time.

@jeffreyhill3960 2 жыл бұрын

Ball valves have a plastic bushing around the ball. It’s a beautiful piece of work.

@mvpmachine 2 жыл бұрын

Thanks Jeffrey! This ball valve is all stainless, we ordered it especially for this it is stainless on stainless no bushing.

@hockeydave195858 Жыл бұрын

Very nice some good thought and great work done there 👍👍

@mvpmachine Жыл бұрын

Thanks Dave!

@garyrandolph5855 Жыл бұрын

Excellent job you got a $5000 stove!

@garyrandolph5855 Жыл бұрын

I’ll make one suggestion, it’s just my point of view, stove pipe, going up should be female male going in .

@mvpmachine Жыл бұрын

Thanks Gary!

@chriscorbin3190 2 жыл бұрын

i used to work for a company that sold and installed wood stoves and that looks a bit smaller, but probably a better option then spending 5 or 6 grand, not including labor...

@ngoccamping3764 2 жыл бұрын

wow 😲.Your DIY products are amazing, so well done .

@mvpmachine 2 жыл бұрын

Thank You!

@rodneyaker5111 2 жыл бұрын

nice setup

@mvpmachine 2 жыл бұрын

Thanks Rodney!

@patriciaeugeniarodriguez8967 2 жыл бұрын

Qué creatividad estuvo maravilloso su invento felicidades pero su perrito dormido feliz en la silla acompañándolo fue lo mejor. Dios lo bendiga

@mvpmachine 2 жыл бұрын

¡Gracias por sus amables comentarios! El nombre de mi cachorro es Lucky, va a todas partes conmigo y logra entrar en la mayoría de mis videos.🐶

@450rhino1 2 жыл бұрын

Great video. Excellent narration. I subscribed.:)

@mvpmachine 2 жыл бұрын

Thank you!

@AMC-eq3jr Жыл бұрын

This wood stove should be put in the Smithsonian - D.C.

@mvpmachine Жыл бұрын

Thank you!

@marianoroelas2516 2 ай бұрын

"15:51" The door is not completely closed- Maybe that´s why secondary burn is not working at 100%. Love this build though.

@mvpmachine 2 ай бұрын

Hi Mariano thank you for watching and commenting. It for sure would have helped to have it seal tightly but everthing was new at the time and on the hinge side the gasket was still not completely compressed. It later became a tight seal after sitting closed and being used and it did help a little but secondary combustion was not useful for the way I use it as a patio heater. It would be if used inside like in a garage. The rope seals are not very good when you use them outdoors the elements kill them so I left it out after her updates and it still works great. If I ever use it inside it will be put back on.

@chriscorbin3190 2 жыл бұрын

how much would you charge to make one, even a lesser quality stove! wicked job too by the way!!

@mvpmachine 2 жыл бұрын

Thanks Chris! This one is not really practical for us to make and try to sell because of the amount of parts that have to be custom manufactured over 110 total.(It would be in the $4k range and I doubt anyone would pay that) but we are working on a stainless steel version that will be a similar size and can be manufactured easier. If you subscribe to our channel we should have a video out by June or July 2022 if all goes as planned and we will be selling them shortly afterward for a reasonable but still yet to be determined price.

@joeschmo7957 Жыл бұрын

7:25 Or, you can go out in the woods and harvest a red pine stump yourself.

@janetlee191 Жыл бұрын

I like everything about this except there's no drawer to pull out the ashes from the

@mvpmachine Жыл бұрын

Hi Janet, there is a tray or sliding door for ash removal on the bottom, we use a rectangular aluminum foil roasting pan under it then just pull the sliding door out and the ashes fall right in. The sliding "tray" is shown in the beginning of the video. It is super easy to clean out the coals and ashes it takes just seconds.

@janetlee191 Жыл бұрын

@@mvpmachine I missed that part. Will rewatch. Thank you. And thanks for replying. Have a wonderful day

@rednecktech70 Жыл бұрын

Referencing the video, your door is not sealing completely. And you can actually see light from around the door seal.

@mvpmachine Жыл бұрын

It was not a perfect seal but after a few uses it compressed the seal on the hinge side and did close completely.

@lehuynh4533 Жыл бұрын

You put a lot of works to build this Best store . Do you sell it ?

@mvpmachine Жыл бұрын

Hi Le thank you! We do not make these to sell it would be too expensive for us to produce them in quantities. But based on what was learned building it we are working on an all stainless steel version, that will be similar and easier for us to manfacture and offer at a fair price. Hope to have it ready in the next few months.

@Up_North_Adventures 4 ай бұрын

I bought a Forney easy weld flux core welder. I am looking to start my very first project. Ive got an unfillable 40lb tank. I am wanting to make a small stove for my 28' camper. Do you think I will be able to safely accomplish this goal? Any ideas or suggestions? Also is the welder i have sufficient enough to do a project such as this? If I keep thicknesses slightly down?

@mvpmachine 4 ай бұрын

I looked at the welder you purchased on Amazon it should work fine. You must go overboard in cleaning or washing the inside of the tank before doing any grinding or welding. You will have no problem heating that trailer with a 40 pound tank unit. I posted a 2 year update for this project on our channel that will give you some more ideas on what worked and what did not. Thank you for watching and commenting. I hope your project goes well please lmk if you have any specific questions as you go that I can help with.

@Up_North_Adventures 4 ай бұрын

thank you so much @@mvpmachine

@mikesweet9646 Жыл бұрын

What would you charge to build one for me

@mvpmachine Жыл бұрын

Hi Mike. It will sound rediculous but there are over 100 custom machined parts in this thing, and a ton of hours. It was never my intention to make these for other people because I would have to charge around 5 thousand and I doubt anyone would pay that. But we are working with one of our customers to develop a similar all stainless steel version that will be stop sign shaped and easier to produce. Stay tuned it will hopefully be available soon. Thanks...Tim

@oldsteamguy 7 ай бұрын

some beautiful and very expensive parts welded onto some old pos propane tank.... i don't get it. if you're going to the extreme in quality parts, why not use a better body

@mvpmachine 7 ай бұрын

The tank was definitely used but in sound shape aside from some pitting in the outer surface. When I started I thought the pitting would give it some "character" but then got carried away like I do with everything and what you see is the result. In hindsight a new tank should have been used but, it still looks decent and works excellent, I still use it several hundred times a year (used it for 4 hours last night).