PROPER BMW Lip Install

Рет қаралды 11,124

Күн бұрын

See how easy it is to install a BMW front lip. Watch as we go through the installation process step-by-step, and see just how easy it can be to get your BMW looking its best!
F22 Lip: tinyurl.com/f22lip
F30 Lip: tinyurl.com/f30lip
Drill: amzn.to/3wv17Nh
Bits: amzn.to/3NvZK8j
Sockets & Ratchets: amzn.to/3NfP25G
Self Tapping Screws: amzn.to/3NqFzIu
Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
Tool Kit: kit.co/fritzramos/bmw-mechani...
Video Gear: kit.co/fritzramos/filming-gear
If you are looking to get started on KZfaq, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
00:00 Intro
01:11 Car & Lip Prep
02:12 Guard Install
03:46 Line up the Lip
05:28 Secure the Lip
06:58 Beauty Shots
07:31 Measurements and Tips

Пікірлер: 37

@ayyyman_ 2 жыл бұрын

Looks so good! I originally put self tapping screws on my front lip but lost a few over time and replaced them with nuts and bolts. Also if it's cold outside, using a heat gun on the adhesive helps a lot!

@FritzRamos 2 жыл бұрын

Thanks for the tips! I hope you don't mind that I pinned your comment, I think you shared some very valuable information 👍

@MargielaGAT 2 жыл бұрын

Hi Fritz, I recently discovered your channel after buying a 2015 435i XDrive Gran Coupe. I have absolutely been loving your guides because I bought the car with a decent number of miles on it and I want to jump on the preventative maintenance. Absolutely loving your videos, super helpful guides on both potential mods I'd like to make as well as keeping the car in good shape. Please keep it up!

@FritzRamos 2 жыл бұрын

Thank you! You're going to love your car especially once all the preventative work is done

@dannymac23 Жыл бұрын

Looks so aggressive .. ideal 😝 great content as always, Fritz.

@autointake3679 2 жыл бұрын

Another great vid 👍🏽 can't wait to do mine

@FritzRamos 2 жыл бұрын

Thank you. Hope your install goes well

@syberr3135 2 жыл бұрын

You always making amazing content thank you for staying consistent bro! #Fritzgang

@FritzRamos 2 жыл бұрын

Thank you so much for alwys showing your support #syberrgang

@johnathanfuentes1223 2 жыл бұрын

amazing video bro!!!

@FritzRamos 2 жыл бұрын

Thank you

@jg_media9 2 жыл бұрын

Lip looks great bro great video 🔥

@FritzRamos 2 жыл бұрын

Thanks man🙏 Your car looks 🔥

@jg_media9 2 жыл бұрын

@@FritzRamos appreciate you bro! Yours as well 🔥🔥

@icebear1935 2 жыл бұрын

Not bad splitter, but I prefer the cleaner look of the lip that integrates nicer with the two holes you have at the front. You should also check out Diamond Splitter bumper inserts for the F22. I was expecting you to get a M2c bumper designed specifically for the F22, would match the hood :)

@FritzRamos 2 жыл бұрын

I like that design that curves up too, would have been better for clearance. The M2C bumper so something I have to save up for that one is pretty expensive lol. I'll take a look into the splitters, thanks for the suggestion

@thomasdiersch1181 2 жыл бұрын

Great look.

@FritzRamos 2 жыл бұрын

Thanks Thomas. Were you able to find someone who ships to Canada?

@thomasdiersch1181 2 жыл бұрын

@@FritzRamos no didn’t follow up. Just spent on new/used winter tires. Amazingly difficult to find. Will reach out to your vendor soon

@MetroCommando8282 Жыл бұрын

Great !!!! nice

@fraysa 5 ай бұрын

Hello, not sure if you're still active, but at 4:20 the part which you're removing the screws from, which basically connects the bumper to the splash shield - would you happen to know the name/part number of it? I lost it so my splash shield came off and I need this "spacer" part to connect the new splash shield.

@diegosilvaestrella8691 2 жыл бұрын

Are you able to take off the sticker?

@renelauzon1887 Жыл бұрын

Where did you get that hood, looks amazing 😮

@FritzRamos Жыл бұрын

Thanks! Full Install: kzfaq.info/get/bejne/i7h8d9ej19q8kXU.html F22 GTS Hood: www.suvneermotorsports.com/shop/f22-f87-gts-designed-aluminum-hood/?ref=vroomtuber F30 GTS Hood: www.suvneermotorsports.com/shop/gts-designed-metal-hood-f3x-edition/?ref=vroomtuber

@MrVuittonDon Жыл бұрын

I have been looking for a longer thicker carbon fiber lip without using long steel prongs. THIS MIGHT BE IT!! The common OEM front carbonfiber lip designs (M235i & M2) don't seem attach out as far. Anyone seen other unique designs please list the names below! 🙏🏼😇

@FritzRamos Жыл бұрын

I know what you mean. So far its held up well

@euroLS1 10 ай бұрын

Is the decal on the lip painted on or a vinyl sticker? I want to order but, don’t want the logo

@FritzRamos 10 ай бұрын

It's a sticker. It can be easily removed

@teodorivkovic3481 Жыл бұрын

Do you have this Lip for bmw f23 220i and gloss black color?

@teodorivkovic3481 Жыл бұрын

And i need an european paper for switzerland it where good if you can help me organize it to do legalize it here in switzerland

@avwraps6586 2 жыл бұрын

im on my 3rd lip and just resorted to $90 cheap ones off ebay tbh xd

@Kevin-im8yq 2 жыл бұрын

cheap lips are the way to go 🤷🏻‍♂️ i’m on my fourth one lol

@FritzRamos 2 жыл бұрын

I've herd they're really durable though. What's your experience?

@atvlol 2 жыл бұрын

Hey bro u still with WFG ?

@FritzRamos 2 жыл бұрын

Yup

@sumtingcool1235 2 ай бұрын

What’s up with the thumbnail??

@AdrianJayeOnline 7 ай бұрын

DUDE, dont put your fingers so close to the knife, your loose them, especially as your pressing hard I cut the tip of my finger off doing the same thing, trust me cutting your fingertip is EXCRUCIATING pain